Yayınlar & Eserler

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Accelerated 3D CFD modeling of multichannel flat grooved heat pipes

Gökçe G., Çetin B., DURSUNKAYA Z.
Energy , cilt.305, 2024 (SCI-Expanded) identifier

Elliptical pillars for the thermal performance enhancement of micro-structured evaporators

Yuncu G., Akkus Y., DURSUNKAYA Z.
International Communications in Heat and Mass Transfer , cilt.148, 2023 (SCI-Expanded) identifier identifier

Comprehensive three-dimensional hydrodynamic and thermal modeling of steady-state operation of a flat grooved heat pipe

Gökçe G., Kurt C., Odabaşı G., DURSUNKAYA Z., Çetin B.
International Journal of Multiphase Flow , cilt.160, 2023 (SCI-Expanded) identifier identifier

Interplay of capillary and Marangoni flows in micropillar evaporation

Yuncu G., Akkus Y., DURSUNKAYA Z.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES , cilt.184, 2023 (SCI-Expanded) Creative Commons License identifier identifier

Capillary boosting for enhanced heat pipe performance through bifurcation of grooves: Numerical assessment and experimental validation

Saygan S., Akkus Y., DURSUNKAYA Z., Cetin B.
International Communications in Heat and Mass Transfer , cilt.137, 2022 (SCI-Expanded) identifier identifier

FAST AND PREDICTIVE HEAT PIPE DESIGN AND ANALYSIS TOOLBOX: H-PAT

SAYGAN S., AKKUS Y., DURSUNKAYA Z., ÇETİN B.
ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY , cilt.42, sa.1, ss.138-156, 2022 (SCI-Expanded) Creative Commons License identifier identifier identifier

Interplay of transport mechanisms during the evaporation of a pinned sessile water droplet

Akdag O., Akkus Y., Cetin B., DURSUNKAYA Z.
PHYSICAL REVIEW FLUIDS , cilt.6, sa.7, 2021 (SCI-Expanded) Creative Commons License identifier identifier identifier

A theoretical framework for comprehensive modeling of steadily fed evaporating droplets and the validity of common assumptions

Akkus Y., ÇETİN B., DURSUNKAYA Z.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES , cilt.158, 2020 (SCI-Expanded) identifier identifier identifier

The effect of surface morphology on the rate of phase change of micron and sub-micron sized 2-D droplets

Rezaeimoghaddam M., Dursunkaya Z.
NANOSCALE AND MICROSCALE THERMOPHYSICAL ENGINEERING , cilt.24, ss.184-200, 2020 (SCI-Expanded) identifier identifier

On the effect of structural forces on a condensing film profile near a fin-groove corner

Akdag O., Akkus Y., DURSUNKAYA Z.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.116, 2020 (SCI-Expanded) identifier identifier identifier

The effect of disjoining pressure on the shape of condensing films in a fin-groove corner

Akdag O., Akkus Y., DURSUNKAYA Z.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES , cilt.142, ss.357-365, 2019 (SCI-Expanded) Creative Commons License identifier identifier

Limitations of Matching Condensing Film Profile on a Micro Fin with the Groove: Critical Effect of Disjoining Pressure

Alipour M., DURSUNKAYA Z.
NANOSCALE AND MICROSCALE THERMOPHYSICAL ENGINEERING , cilt.23, sa.4, ss.289-303, 2019 (SCI-Expanded) identifier identifier

Experimental Thermal Performance Characterization of Flat Grooved Heat Pipes

Alijani H., ÇETİN B., Akkus Y., DURSUNKAYA Z.
HEAT TRANSFER ENGINEERING , cilt.40, ss.784-793, 2019 (SCI-Expanded) Creative Commons License identifier identifier

An Iterative Solution Approach to Coupled Heat and Mass Transfer in a Steadily Fed Evaporating Water Droplet

Akkus Y., ÇETİN B., DURSUNKAYA Z.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME , cilt.141, sa.3, 2019 (SCI-Expanded) Creative Commons License identifier identifier

PERFORMANCE ASSESSMENT OF COMMERCIAL HEAT PIPES WITH SINTERED AND GROOVED WICKS UNDER NATURAL CONVECTION

Atay A., Sariarslan B., Kuscu Y. F., Saygan S., Akkus Y., Gurer A. T., et al.
ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY , cilt.39, sa.2, ss.101-110, 2019 (SCI-Expanded) identifier identifier

Effect of design and operating parameters on the thermal performance of aluminum flat grooved heat pipes

Alijani H., Cetin B., Akkuş Y., Dursunkaya Z.
APPLIED THERMAL ENGINEERING , cilt.132, ss.174-187, 2018 (SCI-Expanded) Creative Commons License identifier identifier

Two-dimensional computational modeling of thin film evaporation

Akkuş Y., Tarman H. I., Cetin B., Dursunkaya Z.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES , cilt.121, ss.237-248, 2017 (SCI-Expanded) Creative Commons License identifier identifier

A numerical algorithm to determine straightness error, surface roughness, and waviness measured using a fiber optic interferometer

Yıldırım M., Okutucu-Ozyurt T., Dursunkaya Z.
OPTICS AND LASER TECHNOLOGY , cilt.85, ss.19-29, 2016 (SCI-Expanded) identifier identifier

A new approach to thin film evaporation modeling

Akkuş Y., Dursunkaya Z.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , cilt.101, ss.742-748, 2016 (SCI-Expanded) identifier identifier

MODELING OF TWO-DIMENSIONAL SOLIDIFICATION OF A FINITE CYLINDER

ODABAŞI G., DURSUNKAYA Z.
ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY , cilt.36, sa.1, ss.61-68, 2016 (SCI-Expanded) identifier

Generalized transient temperature behavior in induction heated workpieces

OKMAN O., DURSUNKAYA Z., Tekkaya A. E.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , cilt.209, ss.5932-5939, 2009 (SCI-Expanded) identifier identifier

Numerical analysis of ablation process on a two dimensional external surface

Aykan F. S., DURSUNKAYA Z.
ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY , cilt.28, sa.1, ss.43-49, 2008 (SCI-Expanded) identifier identifier

Heat transfer effects on the stability of low speed plane Couette-Poiseuille flow

Oezgen S., Dursunkaya Z., Ebrinc A. A.
HEAT AND MASS TRANSFER , cilt.43, sa.12, ss.1317-1328, 2007 (SCI-Expanded) identifier identifier

Accuracy of the two-iteration spectral method for phase change problems

Dursunkaya Z., NAİR S.
APPLIED MATHEMATICAL MODELLING , cilt.30, sa.12, ss.1515-1524, 2006 (SCI-Expanded) identifier identifier

Experimental investigation of oil accumulation in second land of internal combustion engines

İÇÖZ T., Dursunkaya Z.
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME , cilt.127, sa.1, ss.206-212, 2005 (SCI-Expanded) identifier identifier

Numerical solution of solidification in a square prism using an algebraic grid generation technique

Dursunkaya Z., ODABAŞI G.
HEAT AND MASS TRANSFER , cilt.40, ss.91-97, 2003 (SCI-Expanded) identifier identifier

Solidification of a finite medium subject to a periodic variation of boundary temperature

Dursunkaya Z., Nair S.
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME , cilt.70, sa.5, ss.633-637, 2003 (SCI-Expanded) identifier identifier

A MODEL OF PISTON SECONDARY MOTION AND ELASTOHYDRODYNAMIC SKIRT LUBRICATION

DURSUNKAYA Z., KERIBAR R., GANAPATHY V.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME , cilt.116, sa.4, ss.777-785, 1994 (SCI-Expanded) identifier identifier

Diffusion thermo and Thermal diffusion Effects in Transient and Steady Natural Convection from a Vertical Surface

DURSUNKAYA Z., WİLLİAM MARTİN W.
International Journal Of Heat And Mass Transfer , cilt.35, ss.2060-2065, 1992 (SCI-Expanded) identifier identifier

AN INTEGRATED MODEL OF RING PACK PERFORMANCE

KERIBAR R., DURSUNKAYA Z., FLEMMING M.
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME , cilt.113, sa.3, ss.382-389, 1991 (SCI-Expanded) identifier identifier

A MOVING BOUNDARY-PROBLEM IN A FINITE DOMAIN

DURSUNKAYA Z., NAIR S.
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME , cilt.57, sa.1, ss.50-56, 1990 (SCI-Expanded) identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

Eğitimde Kalite Yönetimine Bir Örnek ABET 2000 Akreditasyon Süreci

ÖGEL Z. B., DURSUNKAYA Z.
Hacettepe Universitesi Egitim Fakultesi Dergisi-Hacettepe University Journal Of Education , cilt.20, ss.206-214, 2001 (Scopus)

A Model for Evaporative Consumption of Oil in Reciprocating Engine

WAHİDUZZAMAN S., KERİBAR R., DURSUNKAYA Z., KELLY F.
SAE Transactions Journal of Fuels and Lubricants , cilt.101, ss.1192-1200, 1992 (Hakemli Dergi)

A Comprehensive Model of Piston Skirt Lubrication

KERİBAR R., DURSUNKAYA Z.
SAE Transactions Journal of Engines , cilt.101, ss.844-852, 1992 (Hakemli Dergi) identifier

Simulation of Secondary Dynamics of Articulated and Conventional Piston Assemblies

DURSUNKAYA Z., KERİBAR R.
SAE Transactions Journal of Engines , cilt.101, ss.853-863, 1992 (Hakemli Dergi) identifier

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Accelerated Solution Methodology for 3D Hydrodynamic and Thermal Modeling of Grooved Heat Pipes with Complex Geometries

Gökçe G., Çetin B., DURSUNKAYA Z.
14th International Conference on Computational Heat and Mass Transfer, ICCHMT 2023, Düsseldorf, Almanya, 4 - 08 Eylül 2023, ss.668-677 identifier

Elliptic Micropillar Wick Evaporators for Thermal Management of High Flux Electronics

Yuncu G., Akkus Y., DURSUNKAYA Z.
22nd InterSociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, ITherm 2023, Florida, Amerika Birleşik Devletleri, 30 Mayıs - 02 Haziran 2023, cilt.2023-May identifier

EFFECT OF LIQUID-VAPOR INTERACTION ON THE THERMAL PERFORMANCE OF A FLAT GROOVED HEAT PIPE

DEREBAŞI B., Saygan S., Çetin B., DURSUNKAYA Z.
8th Thermal and Fluids Engineering Conference, TFEC 2023, Maryland, Amerika Birleşik Devletleri, 26 - 29 Mart 2023, cilt.2023-March, ss.33-36 identifier

OLUKLU ISI BORULARINDA KURU ÇALIŞMA REJİMİNİN 3-BOYUTLU BİR MODEL İLE OLARAK İNCELENMESİ

Gökçe G., ÇETİN B., DURSUNKAYA Z.
ULIBTK’21 23. Uluslararası Katılımlı Isı Bilimi ve Tekniği Kongresi, Gaziantep, Türkiye, 8 - 10 Eylül 2021

ISI BORUSU ANALİZ ARACI (H-PAT) İLE TİCARİ ISI BORULARININ BENZETİMLENMESİ

Saygan S., AKKUŞ Y., ÇETİN B., DURSUNKAYA Z.
ULIBTK’21 23. Uluslararası Katılımlı Isı Bilimi ve Tekniği Kongresi, Gaziantep, Türkiye, 8 - 10 Eylül 2021

COALESCENCE OF MICRON-SUBMICRON SIZED THIN FILMS

ERKAN Y. B., DURSUNKAYA Z.
ULIBTK’21 23. Uluslararası Katılımlı Isı Bilimi ve Tekniği Kongresi, Gaziantep, Türkiye, 8 - 10 Eylül 2021 Sürdürülebilir Kalkınma

İNCE SIVI FİLMLERİN VE DAMLACIKLARINYÜZEYLERİNİN FİBER OPTİK GİRİŞİMÖLÇER İLE ÖLÇÜMÜ İÇİN ÖZGÜN BİR YÖNTEM GELİŞTİRİLMESİ

AĞARTAN Y. A., DURSUNKAYA Z.
ULIBTK’21 23. Uluslararası Katılımlı Isı Bilimi ve Tekniği Kongresi, Gaziantep, Türkiye, 8 - 10 Eylül 2021

ÇOK KANALLI DÜZ OLUKLU ISI BORULARININ ISIL PERFORMANS ANALİZİ

Sezmen R. A., ÇETİN B., DURSUNKAYA Z.
ULIBTK’21 23. Uluslararası Katılımlı Isı Bilimi ve Tekniği Kongresi, Gaziantep, Türkiye, 8 - 10 Eylül 2021

DRYOUT PERFORMANCE ASSESSMENT OF GROOVED HEAT PIPES USING A 3-D COMPUTATIONAL MODEL

Gökçe G., ÇETİN B., DURSUNKAYA Z.
ATE-HEFAT 2021 15th International Conference Applied Thermal Engineering, Amsterdam, Hollanda, 25 Temmuz 2021

Experimental validation of the heat pipe evaluation software “Heat Pipe Analysis Toolbox (H-PAT)”

Saygan S., AKKUŞ Y., ÇETİN B., DURSUNKAYA Z.
13th ICCHMT 2021, Paris, Fransa, 18 Mayıs 2021

PERFORMANCE OF A FLAT GROOVED HEAT PIPE WITH A LOCALIZED HEAT LOAD

Sezmen R. A., ÇETİN B., DURSUNKAYA Z.
13th ICCHMT 2021, Paris, Fransa, 18 Mayıs 2021 identifier

MODELING THE EVAPORATION OF DRYING SESSILE DROPLETS WITH BUOYANCY DRIVEN INTERNAL CONVECTION

Akdağ O., AKKUŞ Y., ÇETİN B., DURSUNKAYA Z.
13th ICCHMT 2021, Paris, Fransa, 18 Mayıs 2021 identifier

Design, construction and commissioning of a flat grooved heat pipe with adjustable evaporator and condenser

Saygan S., DURSUNKAYA Z.
22nd Thermal Science and Technology Congress, Kocaeli, Türkiye, 11 - 14 Eylül 2019

Kanatçık-kanal sistemindeki ayrılma basıncı-yoğuşma ilişkisinin boyutsuz parametrelerle incelenmesi

AKDAĞ O., AKKUŞ Y., DURSUNKAYA Z.
22nd Thermal Science and Technology Congress, Kocaeli, Türkiye, 11 - 14 Eylül 2019

Ticari HAD Programının İteratif Kullanımıyla Faz Değişimi Modellenmesi ve Dikdörtgen Kesitli Oluklu Bir Isı Borusunun Isıl Performansının Belirlenmesi

Gökçe G., DURSUNKAYA Z.
22nd Thermal Science and Technology Congress, İzmit, 11 - 14 Eylül 2019

Damlacık buharlaşması sırasında gerçekleşen eşzamanlı fiziksel mekanizmaların yinelemeli çözümü

AKKUŞ Y., ÇETİN B., DURSUNKAYA Z.
22nd Thermal Science and Technology Congress, Kocaeli, Türkiye, 11 - 14 Eylül 2019

Thermal Performance Evaluation Methodology of Grooved Heat Pipes With Rectangular, Trapezoidal and Wedge Cross Sections

Gökçe G., DURSUNKAYA Z.
16th UK Heat Transfer Conference, Nottingham, Birleşik Krallık, 8 - 10 Eylül 2019

Disjoining Pressure Instigated Slope Break of a Condensing Film in a Fin-Groove Corner

Akdağ O., Akkuş Y., DURSUNKAYA Z.
12th International Conference for Computational Heat Mass Momentum Transfer, Roma, İtalya, 3 - 06 Eylül 2019

Comparison of 1-D and 3-D Modeling Methodologies for Flat-Grooved Heat Pipes

Gökçe G., Altunkaş O., ÇETİN B., DURSUNKAYA Z.
12th International Conference for Computational Heat Mass Momentum Transfer, Roma, 3 - 06 Eylül 2019

Thermal conduction and high heat dissipation from small volumes: Heat pipe applications

DURSUNKAYA Z.
1st Workshop on TF-X Integrated Processing Unit Technologies, Kocaeli, Türkiye, 11 - 13 Aralık 2018

An Interferometric Apparatus for the Measurement of Oil Film Thickness in a Journal Bearing

DURSUNKAYA Z., JAFARİ TABRİZİ A.
2018 STLE Tribology Frontiers Conference, Chicago, 28 - 31 Ekim 2018

Oluklu Isı Borularındaki Akışkanlar Mekaniği ve Isı Transferinin Fiziği

DURSUNKAYA Z.
2018 Symposium on Advances in Thermal Fluid Sciences, İzmir, Türkiye, 28 - 29 Haziran 2018

The Effect of Disjoining Pressure on the Condensing Film in a Flat Grooved Heat Pipe

ALİPOUR M., DURSUNKAYA Z.
Joint 19th IHPC and 13th IHPS,, Pisa, İtalya, 10 - 14 Haziran 2018

Experimental Investigation of Thermal Performance of a Silicon Flat Plate Grooved Heat Pipe with an integrated heater and cooler

KURT C., ALİJANİ H., ÇETİN B., AKKUŞ Y., DURSUNKAYA Z.
ASME-ICNMM18, Dubrovnik, Hırvatistan, 10 - 13 Haziran 2018

Dışbükey Bir Köşedeki Sıvı Film Akışının Modellenmesi

AKDAĞ O., AKKUŞ Y., DURSUNKAYA Z.
21. Ulusal Isı Bilimi Ve Tekniği Kongresi, Türkiye, 13 - 16 Eylül 2017

Mikro - Oluklu Isı Borusunun Yoğuşma Bölgesinin Kütle Korunumlu Modellenmesi

HARMANCI İ. B., DURSUNKAYA Z.
21. Ulusal Isı Bilimi Ve Tekniği Kongresi, Türkiye, 13 - 16 Eylül 2017

Düz-oluklu Alüminyum Isı Borularının Isıl Performanslarının Deneysel Olarak Incelenmesi

ALİJANVAND H. A., AKKUŞ Y., ÇETİN B., DURSUNKAYA Z.
21. Ulusal Isı Bilimi Ve Tekniği Kongresi, Türkiye, 13 - 16 Eylül 2017

Sinterli Ve Oluklu Isı Borularının Kuruma Sınırlarının Deneysel Tespiti

ATAY A., SARIARSLAN B., KUŞÇU Y., AKKUŞ Y., SAYGAN S., GÜRER A. T., et al.
21. Ulusal Isı Bilimi Ve Tekniği Kongresi, Türkiye, 13 - 16 Eylül 2017

Investigation of evaporation from a sessile constant shape droplet

AKKUŞ Y., ÇETİN B., DURSUNKAYA Z.
ASME International Conference On Nanochannels, Microchannels and Minichannels, 27 - 31 Ağustos 2017

Experimental Investigation of Thermal Performance of an Aluminum Flat-Grooved Heat Pipe

ALJANVAD H., ÇETİN B., AKKUŞ Y., DURSUNKAYA Z.
ASME International Conference On Nanochannels, Microchannels and Minichannels, 27 - 31 Ağustos 2017

MODELING OF EVAPORATION FROM A SESSILE CONSTANT SHAPE DROPLET

Akkus Y., ÇETİN B., DURSUNKAYA Z.
15th ASME International Conference on Nanochannels, Microchannels, and Minichannels, Cambridge, Kanada, 27 - 30 Ağustos 2017 identifier identifier

A model of liquid flow on the condensation fin top-groove corner of a micro-grooved heat pipe

AKDAĞ O., AKKUŞ Y., DURSUNKAYA Z.
International Conference on Computational Heat, Mass and Momentum Transfer, 28 Mayıs - 01 Haziran 2017

Condensation modeling on the fin top of a micro-grooved heat pipe

ALİPOUR M., DURSUNKAYA Z.
26th canadian Congress of Applied Mechanics, 29 Mayıs - 01 Haziran 2017

3D modeling of a micro-grooved heat pipe

ALİJANVAD H., ÇETİN B., AKKUŞ Y., DURSUNKAYA Z.
International Conference on Computational Heat, Mass and Momentum Transfer, 28 Mayıs - 01 Haziran 2017

Experimental Investigation of Micro Grooved Heat Pipes on Silicon and Aluminum

ALİJANİ H., ÇETİN B., DURSUNKAYA Z.
5th Micro and Nano Flows Conference, Milan, İtalya, 11 - 14 Eylül 2016

Thin Film Evaporation in Grooved Heat Pipes

AKKUŞ Y., DURSUNKAYA Z.
International Conference of Microfluidics, Nanofluidics and Lab-on-a-Chip, Dalian, Çin, 10 - 12 Haziran 2016

INTERNAL BALLISTIC DESIGN OPTIMIZATION OF SOLID ROCKET MOTORSWITH DIRECT SEARCH METHOD

AÇIK S., DURSUNKAYA Z., TOKER A.
Space Propulsion 2016, ROMA, İtalya, 2 - 06 Haziran 2016

Investigation of warpage behavior of single crystal silicon on a silicon Adhesive ceramic integrated structure at cryogenic temperatures

BALOĞLU C., OKUTUCU ÖZYURT H. T., DURSUNKAYA Z.
IMAPS 12th International Conference and Exhibition on Device Packaging, Fountain Hills, Amerika Birleşik Devletleri, 14 - 17 Mart 2016 identifier identifier

INVESTIGATION OF EVAPORATION MODELS IN THE MICRO REGION OF GROOVED HEAT PIPES AND PROPOSAL OF A NEW SOLUTION PROCEDURE

AKKUŞ Y., DURSUNKAYA Z.
ULIBTK’15 20. Ulusal Isı Bilimi ve Tekniği Kongresi, Balıkesir, Türkiye, 2 - 05 Eylül 2015

MİKRO OLUKLU ISI BORUSU ÜRETİMİ İÇİN FARKLI MİKRO ÜRETİM YÖNTEMLERİNİN İRDELENMESİ

SERDAR T., ÇETİN B., Yılmaz M., DURSUNKAYA Z.
ULIBTK’15 20. Ulusal Isı Bilimi ve Tekniği Kongresi, Balıkesir, Türkiye, 2 - 05 Eylül 2015

DİKDÖRTGEN KESİTLİ ISI BORUSU İÇİN ÜÇ BOYUTLU ISI TRANSFER ANALİZİ

GÜLNİHAL O., DURSUNKAYA Z.
ULIBTK’15 20. Ulusal Isı Bilimi ve Tekniği Kongresi, Balıkesir, Türkiye, 2 - 05 Eylül 2015

Mikroelektronik Aygıtların Düşük Sıcaklıkta Şekil Değiştirmelerinin İncelenmesi

EYÜP CAN B., OKUTUCU ÖZYURT H. T., DURSUNKAYA Z.
ULIBTK’15 20. Ulusal Isı Bilimi ve Tekniği Kongresi, Balıkesir, Türkiye, 2 - 05 Eylül 2015

Three-Dimensional Grain Design Optimization of Solid Rocket Motors

Yucel O., Acik S., Toker K. A., DURSUNKAYA Z., AKSEL M. H.
7th International Conference on Recent Advances in Space Technologies (RAST), İstanbul, Türkiye, 16 - 19 Haziran 2015, ss.471-476 identifier identifier

Three Dimensional Grain Design Optimizationof Solid Rocket Motors

YÜCEL O., SEVDA A., ATILGAN T., DURSUNKAYA Z., AKSEL M. H.
RAST 2015, 16 - 19 Haziran 2015

MULTI PHYSICS MODELING OF SILICON BASEDMICRO GROOVED HEAT PIPE

SERDAR T., ÇETİN B., DURSUNKAYA Z.
8th ICCHMT,, 25 - 28 Mayıs 2015

İçten Yanmalı Motorlardaki Gaz Geri Akışıyla Yağ Kaybının İncelenmesi

Bilge E., DURSUNKAYA Z.
19. Ulusal Isı Bilimi ve Tekniği Kongresi, Samsun, Türkiye, 9 - 12 Eylül 2013

AN INTERFEROMETRIC TECHNIQUE FOR MEASURING MICRON LEVEL CLEARANCES FILLED WITH A LUBRICANT

Yildirim M., DURSUNKAYA Z., Okutucu T.
STLE/ASME International Joint Tribology Conference, San-Francisco, Kostarika, 17 - 20 Ekim 2010, ss.167-169 identifier identifier

Effect of Surface Texture on Compressor Piston Lubrication

Hacıoğlu B., DURSUNKAYA Z.
International Compressor Engineering Conference at Purdue, West Lafayette, Amerika Birleşik Devletleri, 12 - 15 Temmuz 2010

DEVELOPMENT OF AN INTERFEROMETRIC TECHNIQUE TO BE USED IN MEASURING MICRON LEVEL CLEARANCES FILLED WITH A LUBRICANT

Yildirim M., DURSUNKAYA Z., Okutucu T.
ASME/STLE International Joint Tribology Conference, Tennessee, Amerika Birleşik Devletleri, 19 - 21 Ekim 2009, ss.151-153 identifier identifier

Experimental Investigation Micron Level Clearances Using Fiber Optic Interferometry

Yıldırım M., OKUTUCU ÖZYURT H. T., DURSUNKAYA Z.
11th International Conference on Tribology, Belgrade, Sırbistan, 13 - 15 Mayıs 2009

Effect of Oil Feed Groove on Compressor Piston Lubrication

Hacıoğlu B., DURSUNKAYA Z.
19th International Compressor Engineering Conference at Purdue, West Lafayette, Amerika Birleşik Devletleri, 14 - 17 Temmuz 2008

İki Boyutlu Dış Yüzeylerde Isıl Aşınma Analizi

Aykan F. S., DURSUNKAYA Z.
16. Ulusal Isı Bilimi ve Tekniği Kongresi, Kayseri, Türkiye, 30 Mayıs - 02 Haziran 2007 Sürdürülebilir Kalkınma

High Speed Couette—Poiseuille Flow Stability in Reverse Flow Conditions

Ebrinç A. A., ÖZGEN S., DURSUNKAYA Z.
4th IASME/WSEAS International Conference on Fluid Mechanics and Aerodynamics, Girit, Yunanistan, 21 - 23 Ağustos 2006

Design Improvement Based on Wear of a Compressor Bearing Using an Elastohydrodynamic Lubrication Mode

Duyar M., DURSUNKAYA Z.
International Compressor Engineering Conference at Purdue, West Lafayette, Amerika Birleşik Devletleri, 17 - 20 Temmuz 2006

Isı Transferinin Couette-Poiseuille Akışının Kararlılığına Etkisi

ÖZGEN S., Ebrinç A. A., DURSUNKAYA Z.
15. Ulusal Isı Bilimi ve Tekniği Kongresi, Trabzon, Türkiye, 7 - 09 Eylül 2005

Heat Transfer Effects on the Stability of Low-speed Couette—Poiseuille Flow

ÖZGEN S., DURSUNKAYA Z., Ebrinç A. A.
Third Ankara International Aerospace Conference, Ankara, Türkiye, 22 - 25 Ağustos 2005

High Speed Viscous Plane Couette—Poiseuille Flow Stability

Ebrinç A. A., DURSUNKAYA Z., ÖZGEN S.
Third Ankara International Aerospace Conference, Ankara, Türkiye, 22 - 25 Ağustos 2005

ABET 2000 Süreci: Birimin Özgörevi Doğrultusunda Eğitim Programı Tasarımı

DURSUNKAYA Z.
Elektrik, Elektronik, Bilgisayar Mühendislik Eğitimi 1. Ulusal Sempozyumu, Ankara, Türkiye, 30 Nisan - 05 Mayıs 2003, ss.22-23

Design Improvement of a Compressor Bearing Using an Elastohydrodynamic Lubrication Model

Duyar M., DURSUNKAYA Z.
International Compressor Engineering Conference at Purdue, West Lafayette, Amerika Birleşik Devletleri, 16 - 19 Temmuz 2002

Oil Loss Mechanisms due to In-cylinder Components

DURSUNKAYA Z.
International Conference on Automotive Technology, ICAT 2000, İstanbul, Türkiye, 19 - 20 Ekim 2000

Preparing students for the international environment of 21st century in Middle East Technical University

DURSUNKAYA Z., ÜÇTUĞ M. Y.
International Millenial Conference on Engineering Education, Manila, Filipinler, 27 - 29 Ocak 2000

Analysis of Piston Slap Using an Elastohydrodynamic Piston Lubrication Model

DURSUNKAYA Z.
International Conference on Lubrication Techniques, İstanbul, Türkiye, 27 - 28 Ekim 1999

Mühendislik Programlarının Akreditasyonunda Yeni Yaklaşımlar

DURSUNKAYA Z.
TMMOB Mühendislik Mimarlik Egitimi Sempozyumu, İstanbul, Türkiye, 22 - 24 Ekim 1999, cilt.200

An Integrated Design Analysis Methodology to Address Piston Tribological Issues

Keribar R., DURSUNKAYA Z., Venkatesh G.
SAE International Congress and Exhibition, Detroit, Amerika Birleşik Devletleri, 1 - 05 Mart 1993 identifier

Experimental and Numerical Investigation of Ring Dynamics and Blowby in a Diesel Engine

DURSUNKAYA Z., Keribar R., Richardson D. E.
SAE International Congress and Exhibition, Detroit, Amerika Birleşik Devletleri, 1 - 05 Mart 1993

A Model of Piston Secondary Motion and Elastohydrodynamic Skirt Lubrication

DURSUNKAYA Z., Keribar R., Ganapathy V.
ASME Energy Sources and Technology Conference and Exhibition, Houston, Amerika Birleşik Devletleri, 31 Ocak - 04 Şubat 1993

Experimental and numerical investigation of inter-ring gas pressures and blowby in a diesel engine

Dursunkaya Z., Keribar R., Richardson D. E.
International Congress and Exposition, Dearborn, MI, Amerika Birleşik Devletleri, 1 - 05 Mart 1993 identifier

Model of piston secondary motion and elastohydrodynamic skirt lubrication

Dursunkaya Z., Keribar R., Ganapathy V.
Energy-Sources Technology Conference and Exhibition, Houston, TX, USA, 31 Ocak - 04 Şubat 1993, ss.1-11 identifier

Modeling of piston secondary dynamics and tribology

Keribar R., Dursunkaya Z.
Proceedings of the Annual Automotive Technology Development Contractors' Coordination Meeting, Dearborn, MI, USA, 28 - 31 Ekim 1991, ss.657-677 identifier

A model for evaporative consumption of lubricating oil in reciprocating engines

Wahiduzzaman S., Keribar R., Dursunkaya Z., Kelley F. A.
International Fuels and Lubricants Meeting and Exposition, San Francisco, CA, Amerika Birleşik Devletleri, 19 - 22 Ekim 1992 identifier

Modeling of Piston Secondary Dynamics and Tribology

Keribar R., DURSUNKAYA Z.
Annual Automotive Technology Development Contractors’xx Coordination Meeting, Dearborn, Amerika Birleşik Devletleri, 01 Mayıs 1991

Integrated modeling of ring pack performance

Keribar R., Dursunkaya Z., Flemming M. F.
Proceedings of the Annual Automotive Technology Development Contractors' Meeting, Dearborn, MI, USA, 22 - 25 Ekim 1990, ss.353-366 identifier

An Integrated Model of Ring Pack Performance

Keribar R., DURSUNKAYA Z., Flemming M.
12th Annual Fall Technical Conference of the ASME Internal Combustion Engine Division, Rockford, IL, Amerika Birleşik Devletleri, 7 - 10 Ekim 1990, cilt.13, ss.103-112 identifier

Integrated Modeling of Ring Pack Performance

Keribar R., DURSUNKAYA Z.
Annual Automotive Technology Development Contractors’xx Meeting, Dearborn, Amerika Birleşik Devletleri, 03 Mayıs 1990

Metrikler

Yayın

109

Atıf (WoS)

328

H-İndeks (WoS)

8

Atıf (Scopus)

661

H-İndeks (Scopus)

12

Atıf (Scholar)

10

H-İndeks (Scholar)

1

Proje

3

Tez Danışmanlığı

36

Açık Erişim

24
BM Sürdürülebilir Kalkınma Amaçları