Publications & Works

Publication Network

Articles Published in Journals That Entered SCI, SSCI and AHCI Indexes

Interplay of transport mechanisms during the evaporation of a pinned sessile water droplet

Akdag O., Akkus Y., Cetin B., DURSUNKAYA Z.
PHYSICAL REVIEW FLUIDS, vol.6, no.7, 2021 (Journal Indexed in SCI) Creative Commons License identifier identifier identifier

A theoretical framework for comprehensive modeling of steadily fed evaporating droplets and the validity of common assumptions

Akkus Y., ÇETİN B., DURSUNKAYA Z.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES, vol.158, 2020 (Journal Indexed in SCI) identifier identifier identifier

The effect of surface morphology on the rate of phase change of micron and sub-micron sized 2-D droplets

Rezaeimoghaddam M., Dursunkaya Z.
NANOSCALE AND MICROSCALE THERMOPHYSICAL ENGINEERING, vol.24, pp.184-200, 2020 (Journal Indexed in SCI) identifier identifier

On the effect of structural forces on a condensing film profile near a fin-groove corner

Akdag O., Akkus Y., DURSUNKAYA Z.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, vol.116, 2020 (Journal Indexed in SCI) identifier identifier identifier

The effect of disjoining pressure on the shape of condensing films in a fin-groove corner

Akdag O., Akkus Y., DURSUNKAYA Z.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES, vol.142, pp.357-365, 2019 (Journal Indexed in SCI) Creative Commons License identifier identifier

Limitations of Matching Condensing Film Profile on a Micro Fin with the Groove: Critical Effect of Disjoining Pressure

Alipour M., DURSUNKAYA Z.
NANOSCALE AND MICROSCALE THERMOPHYSICAL ENGINEERING, vol.23, no.4, pp.289-303, 2019 (Journal Indexed in SCI) identifier identifier

Experimental Thermal Performance Characterization of Flat Grooved Heat Pipes

Alijani H., ÇETİN B., Akkus Y., DURSUNKAYA Z.
HEAT TRANSFER ENGINEERING, vol.40, pp.784-793, 2019 (Journal Indexed in SCI) Creative Commons License identifier identifier

An Iterative Solution Approach to Coupled Heat and Mass Transfer in a Steadily Fed Evaporating Water Droplet

Akkus Y., ÇETİN B., DURSUNKAYA Z.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, vol.141, no.3, 2019 (Journal Indexed in SCI) Creative Commons License identifier identifier

PERFORMANCE ASSESSMENT OF COMMERCIAL HEAT PIPES WITH SINTERED AND GROOVED WICKS UNDER NATURAL CONVECTION

Atay A., Sariarslan B., Kuscu Y. F. , Saygan S., Akkus Y., Gurer A. T. , et al.
ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY, vol.39, no.2, pp.101-110, 2019 (Journal Indexed in SCI) identifier identifier

Effect of design and operating parameters on the thermal performance of aluminum flat grooved heat pipes

Alijani H., Cetin B., Akkuş Y., Dursunkaya Z.
APPLIED THERMAL ENGINEERING, vol.132, pp.174-187, 2018 (Journal Indexed in SCI) Creative Commons License identifier identifier

Two-dimensional computational modeling of thin film evaporation

Akkuş Y., Tarman H. I. , Cetin B., Dursunkaya Z.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES, vol.121, pp.237-248, 2017 (Journal Indexed in SCI) Creative Commons License identifier identifier

A numerical algorithm to determine straightness error, surface roughness, and waviness measured using a fiber optic interferometer

Yıldırım M., Okutucu-Ozyurt T. , Dursunkaya Z.
OPTICS AND LASER TECHNOLOGY, vol.85, pp.19-29, 2016 (Journal Indexed in SCI) identifier identifier

A new approach to thin film evaporation modeling

Akkuş Y., Dursunkaya Z.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, vol.101, pp.742-748, 2016 (Journal Indexed in SCI) identifier identifier

MODELING OF TWO-DIMENSIONAL SOLIDIFICATION OF A FINITE CYLINDER

ODABAŞI G., DURSUNKAYA Z.
ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY, vol.36, no.1, pp.61-68, 2016 (Journal Indexed in SCI) identifier

Generalized transient temperature behavior in induction heated workpieces

OKMAN O., DURSUNKAYA Z. , Tekkaya A. E.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, vol.209, pp.5932-5939, 2009 (Journal Indexed in SCI) identifier identifier

Numerical analysis of ablation process on a two dimensional external surface

Aykan F. S. , DURSUNKAYA Z.
ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY, vol.28, no.1, pp.43-49, 2008 (Journal Indexed in SCI) identifier identifier

Heat transfer effects on the stability of low speed plane Couette-Poiseuille flow

Oezgen S. , Dursunkaya Z. , Ebrinc A. A.
HEAT AND MASS TRANSFER, vol.43, no.12, pp.1317-1328, 2007 (Journal Indexed in SCI) identifier identifier

Accuracy of the two-iteration spectral method for phase change problems

Dursunkaya Z. , NAİR S.
APPLIED MATHEMATICAL MODELLING, vol.30, no.12, pp.1515-1524, 2006 (Journal Indexed in SCI) identifier identifier

Experimental investigation of oil accumulation in second land of internal combustion engines

İÇÖZ T., Dursunkaya Z.
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, vol.127, no.1, pp.206-212, 2005 (Journal Indexed in SCI) identifier identifier

Numerical solution of solidification in a square prism using an algebraic grid generation technique

Dursunkaya Z. , ODABAŞI G.
HEAT AND MASS TRANSFER, vol.40, pp.91-97, 2003 (Journal Indexed in SCI) identifier identifier

Solidification of a finite medium subject to a periodic variation of boundary temperature

Dursunkaya Z. , Nair S.
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, vol.70, no.5, pp.633-637, 2003 (Journal Indexed in SCI) identifier identifier

A MODEL OF PISTON SECONDARY MOTION AND ELASTOHYDRODYNAMIC SKIRT LUBRICATION

DURSUNKAYA Z. , KERIBAR R., GANAPATHY V.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, vol.116, no.4, pp.777-785, 1994 (Journal Indexed in SCI) identifier identifier

Diffusion thermo and Thermal diffusion Effects in Transient and Steady Natural Convection from a Vertical Surface

DURSUNKAYA Z. , WİLLİAM MARTİN W.
International Journal Of Heat And Mass Transfer, vol.35, pp.2060-2065, 1992 (Journal Indexed in SCI) identifier identifier

AN INTEGRATED MODEL OF RING PACK PERFORMANCE

KERIBAR R., DURSUNKAYA Z. , FLEMMING M.
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, vol.113, no.3, pp.382-389, 1991 (Journal Indexed in SCI) identifier identifier

A MOVING BOUNDARY-PROBLEM IN A FINITE DOMAIN

DURSUNKAYA Z. , NAIR S.
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, vol.57, no.1, pp.50-56, 1990 (Journal Indexed in SCI) identifier identifier

Articles Published in Other Journals

Eğitimde Kalite Yönetimine Bir Örnek ABET 2000 Akreditasyon Süreci

ÖGEL Z. B. , DURSUNKAYA Z.
Hacettepe Universitesi Egitim Fakultesi Dergisi-Hacettepe University Journal Of Education, vol.20, pp.206-214, 2001 (Refereed Journals of Other Institutions)

A Model for Evaporative Consumption of Oil in Reciprocating Engine

WAHİDUZZAMAN S., KERİBAR R., DURSUNKAYA Z. , KELLY F.
SAE Transactions Journal of Fuels and Lubricants, vol.101, pp.1192-1200, 1992 (Refereed Journals of Other Institutions)

A Comprehensive Model of Piston Skirt Lubrication

KERİBAR R., DURSUNKAYA Z.
SAE Transactions Journal of Engines, vol.101, pp.844-852, 1992 (Refereed Journals of Other Institutions) identifier

Simulation of Secondary Dynamics of Articulated and Conventional Piston Assemblies

DURSUNKAYA Z. , KERİBAR R.
SAE Transactions Journal of Engines, vol.101, pp.853-863, 1992 (Refereed Journals of Other Institutions) identifier

Refereed Congress / Symposium Publications in Proceedings

ISI BORUSU ANALİZ ARACI (H-PAT) İLE TİCARİ ISI BORULARININ BENZETİMLENMESİ

Saygan S., AKKUŞ Y., ÇETİN B., DURSUNKAYA Z.
ULIBTK’21 23. Uluslararası Katılımlı Isı Bilimi ve Tekniği Kongresi, Gaziantep, Turkey, 8 - 10 September 2021

İNCE SIVI FİLMLERİN VE DAMLACIKLARINYÜZEYLERİNİN FİBER OPTİK GİRİŞİMÖLÇER İLE ÖLÇÜMÜ İÇİN ÖZGÜN BİR YÖNTEM GELİŞTİRİLMESİ

AĞARTAN Y. A. , DURSUNKAYA Z.
ULIBTK’21 23. Uluslararası Katılımlı Isı Bilimi ve Tekniği Kongresi, Gaziantep, Turkey, 8 - 10 September 2021

ÇOK KANALLI DÜZ OLUKLU ISI BORULARININ ISIL PERFORMANS ANALİZİ

Sezmen R. A. , ÇETİN B., DURSUNKAYA Z.
ULIBTK’21 23. Uluslararası Katılımlı Isı Bilimi ve Tekniği Kongresi, Gaziantep, Turkey, 8 - 10 September 2021

COALESCENCE OF MICRON-SUBMICRON SIZED THIN FILMS

ERKAN Y. B. , DURSUNKAYA Z.
ULIBTK’21 23. Uluslararası Katılımlı Isı Bilimi ve Tekniği Kongresi, Gaziantep, Turkey, 8 - 10 September 2021 Sustainable Development

OLUKLU ISI BORULARINDA KURU ÇALIŞMA REJİMİNİN 3-BOYUTLU BİR MODEL İLE OLARAK İNCELENMESİ

Gökçe G., ÇETİN B., DURSUNKAYA Z.
ULIBTK’21 23. Uluslararası Katılımlı Isı Bilimi ve Tekniği Kongresi, Gaziantep, Turkey, 8 - 10 September 2021

DRYOUT PERFORMANCE ASSESSMENT OF GROOVED HEAT PIPES USING A 3-D COMPUTATIONAL MODEL

Gökçe G., ÇETİN B., DURSUNKAYA Z.
ATE-HEFAT 2021 15th International Conference Applied Thermal Engineering, Amsterdam, Netherlands, 25 July 2021

MODELING THE EVAPORATION OF DRYING SESSILE DROPLETS WITH BUOYANCY DRIVEN INTERNAL CONVECTION

Akdağ O., AKKUŞ Y., ÇETİN B., DURSUNKAYA Z.
13th ICCHMT 2021, Paris, France, 18 May 2021

PERFORMANCE OF A FLAT GROOVED HEAT PIPE WITH A LOCALIZED HEAT LOAD

Sezmen R. A. , ÇETİN B., DURSUNKAYA Z.
13th ICCHMT 2021, Paris, France, 18 May 2021

Experimental validation of the heat pipe evaluation software “Heat Pipe Analysis Toolbox (H-PAT)”

Saygan S., AKKUŞ Y., ÇETİN B., DURSUNKAYA Z.
13th ICCHMT 2021, Paris, France, 18 May 2021

Design, construction and commissioning of a flat grooved heat pipe with adjustable evaporator and condenser

Saygan S., DURSUNKAYA Z.
22nd Thermal Science and Technology Congress, Kocaeli, Turkey, 11 - 14 September 2019

Kanatçık-kanal sistemindeki ayrılma basıncı-yoğuşma ilişkisinin boyutsuz parametrelerle incelenmesi

AKDAĞ O., AKKUŞ Y., DURSUNKAYA Z.
22nd Thermal Science and Technology Congress, Kocaeli, Turkey, 11 - 14 September 2019

Damlacık buharlaşması sırasında gerçekleşen eşzamanlı fiziksel mekanizmaların yinelemeli çözümü

AKKUŞ Y., ÇETİN B., DURSUNKAYA Z.
22nd Thermal Science and Technology Congress, Kocaeli, Turkey, 11 - 14 September 2019

Ticari HAD Programının İteratif Kullanımıyla Faz Değişimi Modellenmesi ve Dikdörtgen Kesitli Oluklu Bir Isı Borusunun Isıl Performansının Belirlenmesi

Gökçe G., DURSUNKAYA Z.
22nd Thermal Science and Technology Congress, İzmit, 11 - 14 September 2019

Thermal Performance Evaluation Methodology of Grooved Heat Pipes With Rectangular, Trapezoidal and Wedge Cross Sections

Gökçe G., DURSUNKAYA Z.
16th UK Heat Transfer Conference, Nottingham, United Kingdom, 8 - 10 September 2019

Comparison of 1-D and 3-D Modeling Methodologies for Flat-Grooved Heat Pipes

Gökçe G., Altunkaş O., ÇETİN B., DURSUNKAYA Z.
12th International Conference for Computational Heat Mass Momentum Transfer, Roma, 3 - 06 September 2019

Disjoining Pressure Instigated Slope Break of a Condensing Film in a Fin-Groove Corner

Akdağ O., Akkuş Y., DURSUNKAYA Z.
12th International Conference for Computational Heat Mass Momentum Transfer, Roma, Italy, 3 - 06 September 2019

Thermal conduction and high heat dissipation from small volumes: Heat pipe applications

DURSUNKAYA Z.
1st Workshop on TF-X Integrated Processing Unit Technologies, Kocaeli, Turkey, 11 - 13 December 2018

An Interferometric Apparatus for the Measurement of Oil Film Thickness in a Journal Bearing

DURSUNKAYA Z. , JAFARİ TABRİZİ A.
2018 STLE Tribology Frontiers Conference, Chicago, 28 - 31 October 2018

Oluklu Isı Borularındaki Akışkanlar Mekaniği ve Isı Transferinin Fiziği

DURSUNKAYA Z.
2018 Symposium on Advances in Thermal Fluid Sciences, İzmir, Turkey, 28 - 29 June 2018

The Effect of Disjoining Pressure on the Condensing Film in a Flat Grooved Heat Pipe

ALİPOUR M., DURSUNKAYA Z.
Joint 19th IHPC and 13th IHPS,, Pisa, Italy, 10 - 14 June 2018

Experimental Investigation of Thermal Performance of a Silicon Flat Plate Grooved Heat Pipe with an integrated heater and cooler

KURT C., ALİJANİ H., ÇETİN B., AKKUŞ Y., DURSUNKAYA Z.
ASME-ICNMM18, Dubrovnik, Croatia, 10 - 13 June 2018

Sinterli Ve Oluklu Isı Borularının Kuruma Sınırlarının Deneysel Tespiti

ATAY A., SARIARSLAN B., KUŞÇU Y., AKKUŞ Y., SAYGAN S., GÜRER A. T. , et al.
21. Ulusal Isı Bilimi Ve Tekniği Kongresi, Turkey, 13 - 16 September 2017

Düz-oluklu Alüminyum Isı Borularının Isıl Performanslarının Deneysel Olarak Incelenmesi

ALİJANVAND H. A. , AKKUŞ Y., ÇETİN B., DURSUNKAYA Z.
21. Ulusal Isı Bilimi Ve Tekniği Kongresi, Turkey, 13 - 16 September 2017

Dışbükey Bir Köşedeki Sıvı Film Akışının Modellenmesi

AKDAĞ O., AKKUŞ Y., DURSUNKAYA Z.
21. Ulusal Isı Bilimi Ve Tekniği Kongresi, Turkey, 13 - 16 September 2017

Mikro - Oluklu Isı Borusunun Yoğuşma Bölgesinin Kütle Korunumlu Modellenmesi

HARMANCI İ. B. , DURSUNKAYA Z.
21. Ulusal Isı Bilimi Ve Tekniği Kongresi, Turkey, 13 - 16 September 2017

Experimental Investigation of Thermal Performance of an Aluminum Flat-Grooved Heat Pipe

ALJANVAD H., ÇETİN B., AKKUŞ Y., DURSUNKAYA Z.
ASME International Conference On Nanochannels, Microchannels and Minichannels, 27 - 31 August 2017

Investigation of evaporation from a sessile constant shape droplet

AKKUŞ Y., ÇETİN B., DURSUNKAYA Z.
ASME International Conference On Nanochannels, Microchannels and Minichannels, 27 - 31 August 2017

MODELING OF EVAPORATION FROM A SESSILE CONSTANT SHAPE DROPLET

Akkus Y., ÇETİN B., DURSUNKAYA Z.
15th ASME International Conference on Nanochannels, Microchannels, and Minichannels, Cambridge, Canada, 27 - 30 August 2017 identifier identifier

3D modeling of a micro-grooved heat pipe

ALİJANVAD H., ÇETİN B., AKKUŞ Y., DURSUNKAYA Z.
International Conference on Computational Heat, Mass and Momentum Transfer, 28 May - 01 June 2017

A model of liquid flow on the condensation fin top-groove corner of a micro-grooved heat pipe

AKDAĞ O., AKKUŞ Y., DURSUNKAYA Z.
International Conference on Computational Heat, Mass and Momentum Transfer, 28 May - 01 June 2017

Condensation modeling on the fin top of a micro-grooved heat pipe

ALİPOUR M., DURSUNKAYA Z.
26th canadian Congress of Applied Mechanics, 29 May - 01 June 2017

Experimental Investigation of Micro Grooved Heat Pipes on Silicon and Aluminum

ALİJANİ H., ÇETİN B., DURSUNKAYA Z.
5th Micro and Nano Flows Conference, Milan, Italy, 11 - 14 September 2016

Thin Film Evaporation in Grooved Heat Pipes

AKKUŞ Y., DURSUNKAYA Z.
International Conference of Microfluidics, Nanofluidics and Lab-on-a-Chip, Dalian, China, 10 - 12 June 2016

INTERNAL BALLISTIC DESIGN OPTIMIZATION OF SOLID ROCKET MOTORSWITH DIRECT SEARCH METHOD

AÇIK S., DURSUNKAYA Z. , TOKER A.
Space Propulsion 2016, ROMA, Italy, 2 - 06 June 2016

Investigation of warpage behavior of single crystal silicon on a silicon Adhesive ceramic integrated structure at cryogenic temperatures

BALOĞLU C., OKUTUCU ÖZYURT H. T. , DURSUNKAYA Z.
IMAPS 12th International Conference and Exhibition on Device Packaging, Fountain Hills, United States Of America, 14 - 17 March 2016 identifier identifier

DİKDÖRTGEN KESİTLİ ISI BORUSU İÇİN ÜÇ BOYUTLU ISI TRANSFER ANALİZİ

GÜLNİHAL O., DURSUNKAYA Z.
ULIBTK’15 20. Ulusal Isı Bilimi ve Tekniği Kongresi, Balıkesir, Turkey, 2 - 05 September 2015

MİKRO OLUKLU ISI BORUSU ÜRETİMİ İÇİN FARKLI MİKRO ÜRETİM YÖNTEMLERİNİN İRDELENMESİ

SERDAR T., ÇETİN B., Yılmaz M. , DURSUNKAYA Z.
ULIBTK’15 20. Ulusal Isı Bilimi ve Tekniği Kongresi, Balıkesir, Turkey, 2 - 05 September 2015

Mikroelektronik Aygıtların Düşük Sıcaklıkta Şekil Değiştirmelerinin İncelenmesi

EYÜP CAN B., OKUTUCU ÖZYURT H. T. , DURSUNKAYA Z.
ULIBTK’15 20. Ulusal Isı Bilimi ve Tekniği Kongresi, Balıkesir, Turkey, 2 - 05 September 2015

INVESTIGATION OF EVAPORATION MODELS IN THE MICRO REGION OF GROOVED HEAT PIPES AND PROPOSAL OF A NEW SOLUTION PROCEDURE

AKKUŞ Y., DURSUNKAYA Z.
ULIBTK’15 20. Ulusal Isı Bilimi ve Tekniği Kongresi, Balıkesir, Turkey, 2 - 05 September 2015

Three-Dimensional Grain Design Optimization of Solid Rocket Motors

Yucel O., Acik S., Toker K. A. , DURSUNKAYA Z. , AKSEL M. H.
7th International Conference on Recent Advances in Space Technologies (RAST), İstanbul, Turkey, 16 - 19 June 2015, pp.471-476 identifier identifier

Three Dimensional Grain Design Optimizationof Solid Rocket Motors

YÜCEL O., SEVDA A., ATILGAN T., DURSUNKAYA Z. , AKSEL M. H.
RAST 2015, 16 - 19 June 2015

MULTI PHYSICS MODELING OF SILICON BASEDMICRO GROOVED HEAT PIPE

SERDAR T., ÇETİN B., DURSUNKAYA Z.
8th ICCHMT,, 25 - 28 May 2015

İçten Yanmalı Motorlardaki Gaz Geri Akışıyla Yağ Kaybının İncelenmesi

Bilge E., DURSUNKAYA Z.
19. Ulusal Isı Bilimi ve Tekniği Kongresi, Samsun, Turkey, 9 - 12 September 2013

AN INTERFEROMETRIC TECHNIQUE FOR MEASURING MICRON LEVEL CLEARANCES FILLED WITH A LUBRICANT

Yildirim M., DURSUNKAYA Z. , Okutucu T.
STLE/ASME International Joint Tribology Conference, San-Francisco, Costa Rica, 17 - 20 October 2010, pp.167-169 identifier identifier

Effect of Surface Texture on Compressor Piston Lubrication

Hacıoğlu B., DURSUNKAYA Z.
International Compressor Engineering Conference at Purdue, West Lafayette, United States Of America, 12 - 15 July 2010

DEVELOPMENT OF AN INTERFEROMETRIC TECHNIQUE TO BE USED IN MEASURING MICRON LEVEL CLEARANCES FILLED WITH A LUBRICANT

Yildirim M., DURSUNKAYA Z. , Okutucu T.
ASME/STLE International Joint Tribology Conference, Tennessee, United States Of America, 19 - 21 October 2009, pp.151-153 identifier identifier

Experimental Investigation Micron Level Clearances Using Fiber Optic Interferometry

Yıldırım M., OKUTUCU ÖZYURT H. T. , DURSUNKAYA Z.
11th International Conference on Tribology, Belgrade, Serbia, 13 - 15 May 2009

Effect of Oil Feed Groove on Compressor Piston Lubrication

Hacıoğlu B., DURSUNKAYA Z.
19th International Compressor Engineering Conference at Purdue, West Lafayette, United States Of America, 14 - 17 July 2008

İki Boyutlu Dış Yüzeylerde Isıl Aşınma Analizi

Aykan F. S. , DURSUNKAYA Z.
16. Ulusal Isı Bilimi ve Tekniği Kongresi, Kayseri, Turkey, 30 May - 02 June 2007 Sustainable Development

High Speed Couette—Poiseuille Flow Stability in Reverse Flow Conditions

Ebrinç A. A. , ÖZGEN S. , DURSUNKAYA Z.
4th IASME/WSEAS International Conference on Fluid Mechanics and Aerodynamics, Girit, Greece, 21 - 23 August 2006

Design Improvement Based on Wear of a Compressor Bearing Using an Elastohydrodynamic Lubrication Mode

Duyar M., DURSUNKAYA Z.
International Compressor Engineering Conference at Purdue, West Lafayette, United States Of America, 17 - 20 July 2006

Isı Transferinin Couette-Poiseuille Akışının Kararlılığına Etkisi

ÖZGEN S. , Ebrinç A. A. , DURSUNKAYA Z.
15. Ulusal Isı Bilimi ve Tekniği Kongresi, Trabzon, Turkey, 7 - 09 September 2005

Heat Transfer Effects on the Stability of Low-speed Couette—Poiseuille Flow

ÖZGEN S. , DURSUNKAYA Z. , Ebrinç A. A.
Third Ankara International Aerospace Conference, Ankara, Turkey, 22 - 25 August 2005

High Speed Viscous Plane Couette—Poiseuille Flow Stability

Ebrinç A. A. , DURSUNKAYA Z. , ÖZGEN S.
Third Ankara International Aerospace Conference, Ankara, Turkey, 22 - 25 August 2005

ABET 2000 Süreci: Birimin Özgörevi Doğrultusunda Eğitim Programı Tasarımı

DURSUNKAYA Z.
Elektrik, Elektronik, Bilgisayar Mühendislik Eğitimi 1. Ulusal Sempozyumu, Ankara, Turkey, 30 April - 05 May 2003, pp.22-23

Design Improvement of a Compressor Bearing Using an Elastohydrodynamic Lubrication Model

Duyar M., DURSUNKAYA Z.
International Compressor Engineering Conference at Purdue, West Lafayette, United States Of America, 16 - 19 July 2002

Oil Loss Mechanisms due to In-cylinder Components

DURSUNKAYA Z.
International Conference on Automotive Technology, ICAT 2000, İstanbul, Turkey, 19 - 20 October 2000

Preparing students for the international environment of 21st century in Middle East Technical University

DURSUNKAYA Z. , ÜÇTUĞ M. Y.
International Millenial Conference on Engineering Education, Manila, Philippines, 27 - 29 January 2000

Analysis of Piston Slap Using an Elastohydrodynamic Piston Lubrication Model

DURSUNKAYA Z.
International Conference on Lubrication Techniques, İstanbul, Turkey, 27 - 28 October 1999

Mühendislik Programlarının Akreditasyonunda Yeni Yaklaşımlar

DURSUNKAYA Z.
TMMOB Mühendislik Mimarlik Egitimi Sempozyumu, İstanbul, Turkey, 22 - 24 October 1999, vol.200

Experimental and Numerical Investigation of Ring Dynamics and Blowby in a Diesel Engine

DURSUNKAYA Z. , Keribar R., Richardson D. E.
SAE International Congress and Exhibition, Detroit, United States Of America, 1 - 05 March 1993

An Integrated Design Analysis Methodology to Address Piston Tribological Issues

Keribar R., DURSUNKAYA Z. , Venkatesh G.
SAE International Congress and Exhibition, Detroit, United States Of America, 1 - 05 March 1993 identifier

A Model of Piston Secondary Motion and Elastohydrodynamic Skirt Lubrication

DURSUNKAYA Z. , Keribar R., Ganapathy V.
ASME Energy Sources and Technology Conference and Exhibition, Houston, United States Of America, 31 January - 04 February 1993

Model of piston secondary motion and elastohydrodynamic skirt lubrication

Dursunkaya Z. , Keribar R., Ganapathy V.
Energy-Sources Technology Conference and Exhibition, Houston, TX, USA, 31 January - 04 February 1993, pp.1-11 identifier

Experimental and numerical investigation of inter-ring gas pressures and blowby in a diesel engine

Dursunkaya Z. , Keribar R., Richardson D. E.
International Congress and Exposition, Dearborn, MI, United States Of America, 1 - 05 March 1993 identifier

Modeling of piston secondary dynamics and tribology

Keribar R., Dursunkaya Z.
Proceedings of the Annual Automotive Technology Development Contractors' Coordination Meeting, Dearborn, MI, USA, 28 - 31 October 1991, pp.657-677 identifier

A model for evaporative consumption of lubricating oil in reciprocating engines

Wahiduzzaman S., Keribar R., Dursunkaya Z. , Kelley F. A.
International Fuels and Lubricants Meeting and Exposition, San Francisco, CA, United States Of America, 19 - 22 October 1992 identifier

Modeling of Piston Secondary Dynamics and Tribology

Keribar R., DURSUNKAYA Z.
Annual Automotive Technology Development Contractors’xx Coordination Meeting, Dearborn, United States Of America, 01 May 1991

Integrated modeling of ring pack performance

Keribar R., Dursunkaya Z. , Flemming M. F.
Proceedings of the Annual Automotive Technology Development Contractors' Meeting, Dearborn, MI, USA, 22 - 25 October 1990, pp.353-366 identifier

An Integrated Model of Ring Pack Performance

Keribar R., DURSUNKAYA Z. , Flemming M.
12th Annual Fall Technical Conference of the ASME Internal Combustion Engine Division, Rockford, IL, United States Of America, 7 - 10 October 1990, vol.13, pp.103-112 identifier

Integrated Modeling of Ring Pack Performance

Keribar R., DURSUNKAYA Z.
Annual Automotive Technology Development Contractors’xx Meeting, Dearborn, United States Of America, 03 May 1990