Prof. Dr. TUNCAY YALÇINKAYA

1. Multi-scale Modeling of Polycrystal Turbine Disk and Single Crystal Turbine Blade with Orientation Deviations Under Cyclic Operational Loading

The 20th International Conference on Strength of Materials, Kyoto, Japonya, 2 - 06 Haziran 2025, ss.1, (Özet Bildiri)

2. Uncoupled Damage Modeling in Flow Forming Processes: An Assessment of Failure Mechanisms

Yalçınkaya T., Vural H., Fenercioğlu T. O.

The 20th International Conference on Strength of Materials, Kyoto, Japonya, 2 - 06 Haziran 2025, ss.1, (Özet Bildiri)

3. Phase field modeling of fracture in dual phase microstructures

The 11th International Conference on Multiscale Materials Modeling, Praha, Çek Cumhuriyeti, 22 - 27 Eylül 2024, ss.1, (Özet Bildiri)

4. Dwell Fatigue Damage Analysis in Titanium Alloys Using Crystal Plasticity and Phase Field Frameworks

Bulut O., Yalçınkaya T.

The 24th European Conference on Fracture (ECF24), Zagreb, Hırvatistan, 26 - 30 Ağustos 2024, ss.338, (Özet Bildiri)

5. Indentation Size Effects in Nanoscratch Tests Through a Size-Dependent Crystal Plasticity Framework

Günay E., Yalçınkaya T.

The 24th European Conference on Fracture (ECF24), Zagreb, Hırvatistan, 26 - 30 Ağustos 2024, ss.60, (Özet Bildiri)

6. Failure Assesment Through Uncoupled Damage Models In Flow Forming Processes

Yalçınkaya T., Vural H., Fenercioğlu T. O.

The 24th European Conference on Fracture (ECF24), Zagreb, Hırvatistan, 26 - 30 Ağustos 2024, ss.374, (Özet Bildiri)

7. The Influence of the Hardening Behavior on the Stress State and Damage Evolution in Backward Flow Forming Processes

Vural H., Fenercioğlu T. O., Yalçınkaya T.

The 24th European Conference on Fracture (ECF24), Zagreb, Hırvatistan, 26 - 30 Ağustos 2024, ss.109, (Özet Bildiri)

8. Microstructure Based Analysis Of Plasticity And Failure Of Dual Phase Steels

Çelikses E., Yelek İ., Akbaş Y., Tatlı B., Erdoğan C., Yalçınkaya T.

The 24th European Conference on Fracture (ECF24), Zagreb, Hırvatistan, 26 - 30 Ağustos 2024, ss.425, (Özet Bildiri)

9. Stress State Dependent Phase Field Modeling of Ductile Fracture

Yücel İ., Erdoğan C., Yalçınkaya T.

The 24th European Conference on Fracture (ECF24), Zagreb, Hırvatistan, 26 - 30 Ağustos 2024, ss.341, (Özet Bildiri)

10. Computational Analysis of Size Effects in Miniature Compact Tension Specimens Through Cohesive Zone Elements

Aydıner İ. U., Terentyev D., Yalçınkaya T.

The 24th European Conference on Fracture (ECF24), Zagreb, Hırvatistan, 26 - 30 Ağustos 2024, ss.360, (Özet Bildiri)

11. A Numerical Study of the Ballistic Performance of Multi-Layered Targets Through Uncoupled Damage Models

Tekbaş S., Gökdemir N., Vural H., Yalçınkaya T.

The 24th European Conference on Fracture (ECF24), Zagreb, Hırvatistan, 26 - 30 Ağustos 2024, ss.385, (Özet Bildiri)

12. Modelling of Hydrogen-Induced Failure in Polycrystalline Materials Through a Strain Gradient Crystal Plasticity Framework

Tatlı B., Günay E., Yalçınkaya T.

The 24th European Conference on Fracture (ECF24), Zagreb, Hırvatistan, 26 - 30 Ağustos 2024, ss.623, (Özet Bildiri)

13. Failure Analysis in Dual Phase Steel Microstructures with a Phase Field Fracture Framework

Erdoğan C., Tatli B., Yalçinkaya T.

The 24th European Conference on Fracture (ECF24), Zagreb, Hırvatistan, 26 - 30 Ağustos 2024, ss.258, (Özet Bildiri)

14. Observation of heterogeneous deformation microstructure in ECAP processing of high-purity niobium

Ikeda S., Miyamoto H., Yuasa M., Yalçinkaya T., Bulut O., Günay E.

2nd Workshop on the evaluation of crystal orientation of crystalline materials and techniques for analysing crystal orientation, Toyohashi, Japonya, 28 - 29 Kasım 2023, ss.8-9, (Özet Bildiri)

15. A comparison of predictions from micropolar and strain gradient crystal plasticity theories for textured oligocrystals

Tandoğan I. T., Bulut O., Budnitzki M., Yalçinkaya T., Sandfeld S.

93rd Annual Meeting of the International Association of Applied Mathematics and Mechanics, GAMM 2023, Dresden, Almanya, 30 Mayıs - 02 Haziran 2023, ss.227, (Özet Bildiri)

16. Micromechanical modeling of failure in dual phase steels

Aydiner I. U., Tatli B., Yalçinkaya T.

26th International ESAFORM Conference on Material Forming, ESAFORM 2023, Krakow, Polonya, 19 - 21 Nisan 2023, cilt.28, ss.1443-1452, (Tam Metin Bildiri)

17. Crystal plasticity finite element analysis of linear and non-linear extrusion processes

Şimşek Ü., Miyamoto H., Yalçinkaya T.

26th International ESAFORM Conference on Material Forming, ESAFORM 2023, Krakow, Polonya, 19 - 21 Nisan 2023, cilt.28, ss.553-562, (Tam Metin Bildiri)

18. Examination of intrinsic and extrinsic size effect in thin specimens through crystal plasticity frameworks

Günay E., Bulut O., Yalçinkaya T.

26th International ESAFORM Conference on Material Forming, ESAFORM 2023, Krakow, Polonya, 19 - 21 Nisan 2023, cilt.28, ss.1471-1480, (Tam Metin Bildiri)

19. Flow forming and recrystallization behaviour of CuZn30 alloy

Mutlu M., Karakaş A., Kuşdemir H., Koltan U. K., Yalçinkaya T.

26th International ESAFORM Conference on Material Forming, ESAFORM 2023, Krakow, Polonya, 19 - 21 Nisan 2023, cilt.28, ss.1021-1028, (Tam Metin Bildiri)

20. Analysis of additively manufactured anisotropic microstructures through crystal plasticity frameworks

Bulut O., Günay E., Fenercioğlu T. O., Yalçinkaya T.

26th International ESAFORM Conference on Material Forming, ESAFORM 2023, Krakow, Polonya, 19 - 21 Nisan 2023, cilt.28, ss.179-188, (Tam Metin Bildiri)

21. Local and nonlocal strain gradient approaches for size-dependent plastic deformation

Ünsal İ. E., Günay E., Yalçinkaya T.

26th International ESAFORM Conference on Material Forming, ESAFORM 2023, Krakow, Polonya, 19 - 21 Nisan 2023, cilt.28, ss.1453-1462, (Tam Metin Bildiri)

22. Phase field modeling of ductile fracture and application in metal forming

Waseem S., Erdoğan C., Yalçinkaya T.

26th International ESAFORM Conference on Material Forming, ESAFORM 2023, Krakow, Polonya, 19 - 21 Nisan 2023, cilt.28, ss.1593-1602, (Tam Metin Bildiri)

23. Influence of increased die surface roughness on the product quality in rotary swaging

Fenercioğlu T. O., Sariyarlioğlu E. C., Adigüzel E., Şimşek A. K., Koltan U. K., Yalçinkaya T.

26th International ESAFORM Conference on Material Forming, ESAFORM 2023, Krakow, Polonya, 19 - 21 Nisan 2023, cilt.28, ss.899-908, (Tam Metin Bildiri)

24. Experimental identification of uncoupled ductile damage models and application in flow forming of IN718

Vural H., Erdoğan C., Karakaş A., Fenercioglu T. O., Yalçınkaya T.

26th International ESAFORM Conference on Material Forming, ESAFORM 2023, Krakow, Polonya, 19 - 21 Nisan 2023, cilt.28, ss.807-816, (Tam Metin Bildiri)

25. Fiber Optik Bobin Kompozit Yapılarında Homojenizasyon Tekniği ile Malzeme Modellemesi

Kahveci Ö., Gençoğlu C., Yalçinkaya T.

SAVTEK 2022, 10. Savunma Teknolojileri Kongresi, Ankara, Türkiye, 13 - 15 Eylül 2022, ss.449-459, (Tam Metin Bildiri)

26. Phase field modelling of fatigue crack growth at constant and variable amplitude loading

Waseem S., Ünsal İ. E., Yalçinkaya T.

23rd European Conference on Fracture, ECF 2022, Funchal, Portekiz, 27 Haziran - 01 Temmuz 2022, cilt.42, ss.1692-1699, (Tam Metin Bildiri)

27. Numerical analysis of ballistic impact through FE and SPH methods

Göçmen Y., Vural H., Erdoğan C., Yalçınkaya T.

23rd European Conference on Fracture, ECF 2022, Funchal, Portekiz, 27 Haziran - 01 Temmuz 2022, cilt.42, ss.1736-1743, (Tam Metin Bildiri)

28. Crack Initiation and Propagation in Dual-phase Steels Through Crystal Plasticity and Cohesive Zone Frameworks

Yalçinkaya T., Tatli B., Ünsal İ. E., Aydiner I. U.

23rd European Conference on Fracture, ECF 2022, Funchal, Portekiz, 27 Haziran - 01 Temmuz 2022, cilt.42, ss.1651-1659, (Tam Metin Bildiri)

29. Effect of process parameters on the ductile failure behavior of flow forming process

Erdoğan C., Vural H., Fenercioglu T. O., Yalçınkaya T.

23rd European Conference on Fracture, ECF 2022, Funchal, Portekiz, 27 Haziran - 01 Temmuz 2022, cilt.42, ss.1643-1650, (Tam Metin Bildiri)

30. Numerical analysis of a micromechanics based cohesive zone model for ductile failure

Tandoğan İ. T., Yalçınkaya T.

2nd International Workshop on Plasticity, Damage and Fracture of Engineering Materials, Ankara, Türkiye, 18 - 20 Ağustos 2021, ss.31, (Özet Bildiri)

31. Numerical analysis and extension of a porous plasticity model for ductile failure

Erdoğan C., Yalçınkaya T.

2nd International Workshop on Plasticity, Damage and Fracture of Engineering Materials, Ankara, Türkiye, 18 - 20 Ağustos 2021, ss.117, (Özet Bildiri)

32. Crystal plasticity finite element analysis of twist extrusion processes

Şimşek Ü., Yalçınkaya T.

2nd International Workshop on Plasticity, Damage and Fracture of Engineering Materials, Ankara, Türkiye, 18 - 20 Ağustos 2021, ss.52, (Özet Bildiri)

33. Evolution of microstructure of copper single crystal processed by nonlinear twist extrusion

Tamıakı S., Mıyamoto H., Yamada S., Yalçınkaya T., Şimşek Ü.

The Japan Society of Mechanical Engineers Kansai Branch 96th Annual General Meeting, Osaka, Japonya, 17 - 18 Mart 2021, sa.3912, ss.1-2, (Özet Bildiri)

34. Ductile failure prediction during the flow forming process

Vural H., Erdoğan C., Fenercioglu T. O., Yalçınkaya T.

2nd International Workshop on Plasticity, Damage and Fracture of Engineering Materials, IWPDF 2021, Ankara, Türkiye, 18 - 20 Ağustos 2021, cilt.35, ss.25-33, (Tam Metin Bildiri)

35. Numerical analysis of thermo-mechanical behavior in flow forming

GÜNAY E., Fenercioglu T. O., YALÇINKAYA T.

2nd International Workshop on Plasticity, Damage and Fracture of Engineering Materials, IWPDF 2021, Ankara, Türkiye, 18 - 20 Ağustos 2021, cilt.35, ss.42-50, (Tam Metin Bildiri)

36. The influence of thickness/grain size ratio in microforming through crystal plasticity

BULUT O., Acar S. S., YALÇINKAYA T.

2nd International Workshop on Plasticity, Damage and Fracture of Engineering Materials, IWPDF 2021, Ankara, Türkiye, 18 - 20 Ağustos 2021, cilt.35, ss.228-236, (Tam Metin Bildiri)

37. Crystal plasticity modeling of additively manufactured metallic microstructures

Acar S. S., BULUT O., YALÇINKAYA T.

2nd International Workshop on Plasticity, Damage and Fracture of Engineering Materials, IWPDF 2021, Ankara, Türkiye, 18 - 20 Ağustos 2021, cilt.35, ss.219-227, (Tam Metin Bildiri)

38. Effect of Variable Transport Properties in Rayleigh Benard Convection Problem at High Rayleigh Numbers

Afatsun A. C., Karban U., Yalçınkaya T., Karaca M.

International Conference on Applications in Computational Engineering & Sciences, Chennai, Hindistan, 30 - 31 Ekim 2020, ss.57, (Özet Bildiri)

39. Characterization and Modeling of the Microstructure-scale Strain Distributions in an Aluminum Alloy Under Multiple Strain Paths

Güler B., Şimşek Ü., Yalçınkaya T., Efe M.

TMS 2020 Annual Meeting & Exhibition, California, Amerika Birleşik Devletleri, 23 - 27 Şubat 2020, ss.221, (Özet Bildiri)

40. Micromechanical Aspects of Amorphous Plasticity Through a Strain Gradient Crystal Plasticity Framework

Demirci A., Yalçınkaya T., Sandfeld S.

1st International Workshop on Plasticity, Damage and Fracture of Engineering Materials, Ankara, Türkiye, 22 - 23 Ağustos 2019, ss.64, (Özet Bildiri)

41. Validation of Local Crystal Plasticity Models in Micro-Scale Deformation of Aluminum

Efe M., Yalçınkaya T., Şimşek Ü., Güler B.

6th International Conference on Material Modelling, Lund, İsveç, 26 - 28 Haziran 2019, cilt.1, ss.93, (Özet Bildiri)

42. Micromechanically motivated inter-granular cracking in polycrystalline aggregates

Yalçınkaya T., Tandoğan İ. T., Özdemir İ.

6th International Conference on Material Modelling, Lund, İsveç, 26 - 28 Haziran 2019, cilt.1, ss.62, (Özet Bildiri)

43. Physics based cohesive zone relations for inter-granular cracking

Yalçınkaya T.

18th-GAMM-Seminar on Microstructures, Berlin, Almanya, 18 - 19 Ocak 2019, ss.16, (Özet Bildiri)

44. Formulation and Implementation of a New Porous Plasticity Model

Yalçınkaya T., Erdoğan C., Tandoğan İ. T., Cocks A.

1st International Workshop on Plasticity, Damage and Fracture of Engineering Materials (IWPDF), Ankara, Türkiye, 22 - 23 Ağustos 2019, cilt.21, ss.46-51, (Tam Metin Bildiri)

45. A Micromechanics Based Numerical Investigation of Dual Phase Steels

Yalçınkaya T., Gungor G. O., Çakmak S. O., Tekoğlu C.

1st International Workshop on Plasticity, Damage and Fracture of Engineering Materials (IWPDF), Ankara, Türkiye, 22 - 23 Ağustos 2019, cilt.21, ss.61-72, (Tam Metin Bildiri)

46. Development of a Micromechanics Based Cohesive Zone Model and Application for Ductile Fracture

Yalçınkaya T., Tandoğan İ. T., Cocks A.

1st International Workshop on Plasticity, Damage and Fracture of Engineering Materials (IWPDF), Ankara, Türkiye, 22 - 23 Ağustos 2019, cilt.21, ss.52-60, (Tam Metin Bildiri)

47. Morphology and Grain Orientation Dependent Localization and Necking in Dual-phase Steels

Çakmak S. O., Yalçınkaya T.

1st International Workshop on Plasticity, Damage and Fracture of Engineering Materials (IWPDF), Ankara, Türkiye, 22 - 23 Ağustos 2019, cilt.21, ss.224-232, (Tam Metin Bildiri)

48. Micromechanical Modeling of Inter-Granular Localization, Damage and Fracture

YALÇINKAYA T., Ozdemir I., Firat A. O., Tandogan İ. T.

22nd European Conference on Fracture (ECF) - Loading and Environmental Effects on Structural Integrity, Belgrade, Sırbistan Ve Karadağ, 26 - 31 Ağustos 2018, cilt.13, ss.385-390, (Tam Metin Bildiri)

49. Grain Boundaries in Polycrystalline Plasticity

Yalçınkaya T., Özdemir İ.

10th European Solid Mechanics Conference, Bologna, İtalya, 2 - 06 Temmuz 2018, (Özet Bildiri)

50. Grain-Scale Investigations of Deformation Heterogeneities in Aluminum Alloys

GÜLER B., Simsek U., YALÇINKAYA T., EFE M.

21st International ESAFORM Conference on Material Forming (ESAFORM), Palermo, İtalya, 23 - 25 Nisan 2018, cilt.1960, (Tam Metin Bildiri)

51. Three Dimensional Grain Boundary Modeling in Polycrystalline Plasticity

YALÇINKAYA T., ÖZDEMİR İ., Firat A. O.

21st International ESAFORM Conference on Material Forming (ESAFORM), Palermo, İtalya, 23 - 25 Nisan 2018, cilt.1960, (Tam Metin Bildiri)

52. Size Effect in Polycrystal Plasticity

YALÇINKAYA T.

COMPLAS 2017, BARSELONA, İspanya, 5 - 07 Eylül 2017, (Özet Bildiri)

53. Mixed Mode Fatigue Crack Growth Under Variable Amplitude Loading Through XFEM Based Automated Algorithm

YALÇINKAYA T., DİRİK H.

International Conference on Structural Integrity and Durability, Dubrovnik, Hırvatistan, 15 - 18 Ağustos 2017, (Tam Metin Bildiri)

54. Intrinsic and Statistical Size Effects in Microforming

YALÇINKAYA T., Demirci A., Simonovski I., ÖZDEMİR İ.

20th International ESAFORM Conference on Material Forming, Dublin, İrlanda, 26 - 28 Nisan 2017, cilt.1896, (Tam Metin Bildiri)

55. Microstructure Evolution in Plasticity

YALÇINKAYA T.

24th International Congress of Theoretical and Applied Mechanic, Montreal, Kanada, 21 - 26 Ağustos 2016, cilt.1, ss.2512-2513, (Tam Metin Bildiri)

56. Inter granular Microstructure Formation and Evolution Through Crystal Plasticity

YALÇINKAYA T., ÖZDEMİR İ.

12th World Congress on Computational Mechanics (WCCM2016) Conference, SEUL, Güney Kore, 24 - 29 Temmuz 2016, (Özet Bildiri)

57. Micromechanical cohesive zone relations for ductile fracture

YALÇINKAYA T., Cocks A.

21st European Conference on Fracture (ECF), Catania, İtalya, 20 - 24 Haziran 2016, cilt.2, ss.1716-1723, (Tam Metin Bildiri)

58. Fatigue Crack Growth Under Variable Amplitude Loading Through XFEM

Dirik H., YALÇINKAYA T.

21st European Conference on Fracture (ECF), Catania, İtalya, 20 - 24 Haziran 2016, cilt.2, ss.3073-3080, (Tam Metin Bildiri)

59. Strain Gradient Polycrystal Plasticity for Micro-Forming

YALÇINKAYA T., Simonovski I., ÖZDEMİR İ.

19th International ESAFORM Conference on Material Forming (ESAFORM), Nantes, Fransa, 27 - 29 Nisan 2016, cilt.1769, (Tam Metin Bildiri)

60. Strain Gradient Crystal Plasticity Approach to Modelling Micro-Plastic Flow and Localisation in Polycrystalline Materials

Simonovski I., YALÇINKAYA T.

24th International Conference on Nuclear Energy for New Europe (NENE), Portoroz, Slovenya, 14 - 17 Eylül 2015, (Tam Metin Bildiri)

61. Micromechanically motivated cohesive zone formulation for ductile fracture

YALÇINKAYA T., COCKS A.

European Conference on Numerical Mathematics and Advanced Applications, Ankara, Türkiye, 14 - 18 Eylül 2015, (Özet Bildiri)

62. Strain Localization in Multi Slip Crystal Plasticity

YALÇINKAYA T., LANCIONI G., ZITTI G.

9th. European Solid Mechanics Conference, Madrid, İspanya, 6 - 10 Temmuz 2015, (Tam Metin Bildiri)

63. Modeling of grain boundaries in a strain gradient crystal plasticity framework

YALÇINKAYA T., ÖZDEMİR İ.

11th. World Congress on Computational Mechanics, Barcelona, İspanya, 20 - 25 Temmuz 2014, (Özet Bildiri)

64. Energy-based modeling of localization and necking in plasticity

Yalcinkaya T., Lancioni G.

20th European Conference on Fracture (ECF), Trondheim, Norveç, 30 Haziran - 04 Temmuz 2014, cilt.3, ss.1618-1625, (Tam Metin Bildiri)

65. Strain localization induced failure and microstructure evolution through rate dependent and rate independent non convex plasticity models

YALÇINKAYA T., LANCIONI G.

20th. European Conference on Fracture, Trondheim, Norveç, 30 Haziran - 04 Temmuz 2014, (Özet Bildiri)

66. Intergranular cracking in polycrystalline aggregates using cohesive zone approach

SIMONOVSKI I., CiZELJ L., YALÇINKAYA T.

3rd International Workshop on Physics Based Material Models and Experimental Observations, İzmir, Türkiye, 2 - 04 Haziran 2014, ss.101, (Özet Bildiri)

67. Plastic slip patterns through rate-independent and rate-dependent plasticity

Lancioni G., Yalcinkaya T.

17th Conference of the European-Scientific-Association-on-Material-Forming (ESAFORM), Espoo, Finlandiya, 7 - 09 Mayıs 2014, ss.1777-1786, (Tam Metin Bildiri)

68. Rate dependent and rate independent plasticity models for slip patterning and strain localization

LANCIONI G., YALÇINKAYA T.

11th AIMETA (Italian Association of Theoretical and Applied Mechanics) Congress, Torino, İtalya, 17 - 20 Eylül 2013, (Tam Metin Bildiri)

69. The need for physics based fracture and damage models for nuclear energy applications

NILSSON K. F., YALÇINKAYA T.

2nd International Workshop on Physics Based Material Models and Experimental Observations, Antalya, Türkiye, 15 - 17 Mayıs 2013, (Özet Bildiri)

70. Rate dependent plastic microstructure evolution through strain gradient crystal plasticity

YALÇINKAYA T.

Plasticity 2013, Nassau, Bahamalar, 03 Ocak 2013 - 09 Ekim 2012, (Özet Bildiri)

71. Intragranular deformation patterning through non convex rate dependent strain gradient crystal plasticity

YALÇINKAYA T.

83rd Annual Meeting of the International Association of Applied Mathematics and Mechanics, Weinheim, Almanya, 26 - 30 Mart 2012, cilt.12, ss.819-822, (Tam Metin Bildiri)

72. Material issues in nuclear applications

NILSSON K. F., YALÇINKAYA T.

1st International Workshop on Physics Based Material Models and Experimental Observations, Ankara, Türkiye, 22 - 23 Ekim 2012, ss.1, (Özet Bildiri)

73. Modeling and simulation of inelastic microstructure development and inhomogeneous material behaviour via non convex rate dependent gradient plasticity

KLUSEMANN B., YALÇINKAYA T., GEERS M. G. D., SVENDSEN B.

6th European Congress on Computational Methods in Applied Sciences and Engineering, Vienna, Avusturya, 10 - 14 Eylül 2012, (Tam Metin Bildiri)

74. Non local polycrystal plasticity modeling of Generation IV nuclear reactor components with special focus on grain boundaries

YALÇINKAYA T., ÖZDEMİR İ., NILSSON K. F.

COMPLAS XI, XI International Conference on Computational Plasticity, Barcelona, İspanya, 7 - 09 Eylül 2011, (Özet Bildiri)

75. Patterning in non convex strain gradient crystal plasticity

GEERS M. G. D., YALÇINKAYA T., BREKELMANS W. A. M.

2nd International Conference on Material Modeling, Paris, Fransa, 31 Ağustos - 02 Eylül 2011, (Özet Bildiri)

76. Modeling of inelastic microstructure development and inhomogeneous material behavior via non convex rate dependent crystal plasticity

SVENDSEN B., KLUSEMANN B., YALÇINKAYA T., GEERS M. G. D.

23rd International Congress on Theoretical and Applied Mechanics (ICTAM), Beijing, Çin, 19 - 24 Ağustos 2012, (Tam Metin Bildiri)

Yayınlar & Eserler

Yayın

Yayın (WoS)

Yayın (Scopus)