Prof. Dr. NECATİ ÖZKAN

Yayın Ağı

Makaleler 71

1. Influence of conventional and supramolecular gellants on the rheological properties of JP-10 gel fuels

Ozyetis H., Koc A., Esiyok H., ÖZKAN N.

FUEL , cilt.404, 2026 (SCI-Expanded, Scopus)

2. Investigating the Multistep Polymerization Reactions of DCPD with Grubbs’ First-Generation Catalyst

Özeroğlu B., ÖZKAN N.

ACS Applied Polymer Materials , cilt.7, sa.10, ss.6250-6261, 2025 (SCI-Expanded, Scopus)

3. Enhancing the performance of HTPB-IPDI-based polyurethane composite liner through effective carbon black dispersion**

Aslan O., Atalar T., Atınç Yılmaz G., ÖZKAN N.

Propellants, Explosives, Pyrotechnics , cilt.48, sa.12, 2023 (SCI-Expanded, Scopus)

4. High-temperature electrochemical hydrogen separation from reformate gases using PBI/MOF composite membrane

Bulanık Durmuş G. N., Eren E. O., Devrim Y., ÇOLPAN C. Ö., ÖZKAN N.

International Journal of Hydrogen Energy , cilt.48, sa.60, ss.23044-23054, 2023 (SCI-Expanded, Scopus)

5. 3D printing of crude lignocellulosic biomass extracts containing hemicellulose and lignin

Gokce Bahcegul E., Bahcegul E., ÖZKAN N.

INDUSTRIAL CROPS AND PRODUCTS , cilt.186, 2022 (SCI-Expanded, Scopus)

6. Preparation of polybenzimidazole/ZIF-8 and polybenzimidazole/UiO-66 composite membranes with enhanced proton conductivity

Eren E. O., ÖZKAN N., Devrim Y.

International Journal of Hydrogen Energy , cilt.47, sa.45, ss.19690-19701, 2022 (SCI-Expanded, Scopus)

7. Polybenzimidazole-modified carbon nanotubes as a support material for platinum-based high-temperature proton exchange membrane fuel cell electrocatalysts

Eren E. O., ÖZKAN N., DEVRİM Y.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.46, sa.57, ss.29556-29567, 2021 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

8. Development of non-noble Co-N-C electrocatalyst for high-temperature proton exchange membrane fuel cells

Eren E. O., ÖZKAN N., Devrim Y.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.45, sa.58, ss.33957-33967, 2020 (SCI-Expanded, Scopus)

9. 3D Printing of Hemicellulosic Biopolymers Extracted from Lignocellulosic Agricultural Wastes

Bahcegul E. G., Bahcegul E., ÖZKAN N.

ACS APPLIED POLYMER MATERIALS , cilt.2, sa.7, ss.2622-2632, 2020 (SCI-Expanded, ESCI, Scopus) Sürdürülebilir Kalkınma

10. Efficient Acetylation of Xylans by Exploiting the Potassium Acetate Formed During the Alkaline Extraction

AKKUS M., ÖZKAN N., BAKIR U.

JOURNAL OF POLYMERS AND THE ENVIRONMENT , cilt.26, sa.8, ss.3397-3403, 2018 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

11. Fabrication and Characterization of Cross-linked Polybenzimidazole Based Membranes for High Temperature PEM Fuel Cells

ÖZDEMİR Y., ÖZKAN N., Devrim Y.

ELECTROCHIMICA ACTA , cilt.245, ss.1-13, 2017 (SCI-Expanded, Scopus)

12. Preparation of silica coated cobalt ferrite magnetic nanoparticles for the purification of histidine-tagged proteins

Aygar G., Kaya M., Özkan N., Kocabıyık S., Volkan M.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS , cilt.87, ss.64-71, 2015 (SCI-Expanded, Scopus)

13. Kinetic approach for the purification of nucleotides with magnetic separation

Tural S., Tural B., Ece M. S., Yetkin E., ÖZKAN N.

JOURNAL OF SEPARATION SCIENCE , cilt.37, sa.22, ss.3370-3376, 2014 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

14. An unconventional approach for improving the integrity and mechanical properties of xylan type hemicellulose based films

Bahcegul E., Toraman H. E., Erdemir D., AKINALAN B., ÖZKAN N., Bakir U.

RSC ADVANCES , cilt.4, sa.64, ss.34117-34126, 2014 (SCI-Expanded, Scopus)

15. Post-extrusion heat-treatment as a facile method to enhance the mechanical properties of extruded xylan-based polymeric materials

AKKUS M., BAHÇEGÜL E., ÖZKAN N., Bakir U.

RSC ADVANCES , cilt.4, sa.107, ss.62295-62300, 2014 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

16. Extrusion of xylans extracted from corn cobs into biodegradable polymeric materials

BAHÇEGÜL E., Akinalan B., Toraman H. E., Erdemir D., ÖZKAN N., Bakir U.

BIORESOURCE TECHNOLOGY , cilt.149, ss.582-585, 2013 (SCI-Expanded, Scopus)

17. Effects of Defatted Flaxseed Addition on Rheological Properties of Wheat Flour Slurry

HAO C., Lİ D., Mao Z., ÖZKAN N., Chen X. D.

INTERNATIONAL JOURNAL OF FOOD ENGINEERING , cilt.9, sa.4, ss.457-466, 2013 (SCI-Expanded, Scopus)

18. Evaluation of alkaline pretreatment temperature on a multi-product basis for the co-production of glucose and hemicellulose based films from lignocellulosic biomass

BAHÇEGÜL E., TORAMAN H. E., ÖZKAN N., Bakir U.

BIORESOURCE TECHNOLOGY , cilt.103, sa.1, ss.440-445, 2012 (SCI-Expanded, Scopus)

19. Thermal Properties of Polyurethane Films Prepared from Mixed Cellulose, Hemicelluloses and Lignin

SHAO M., LIU Z., Lİ D., ZHAO Y., ÖZKAN N., CHEN X. D.

INTERNATIONAL JOURNAL OF FOOD ENGINEERING , cilt.8, sa.4, 2012 (SCI-Expanded, Scopus)

20. Rheological study and fractal analysis of flaxseed gum gels

Wang Y., Li D., Wang L., Wu M., ÖZKAN N.

CARBOHYDRATE POLYMERS , cilt.86, sa.2, ss.594-599, 2011 (SCI-Expanded, Scopus)

21. Dynamic mechanical properties of flaxseed gum based edible films

WANG Y., Lİ D., WANG L., YANG L., ÖZKAN N.

CARBOHYDRATE POLYMERS , cilt.86, sa.2, ss.499-504, 2011 (SCI-Expanded, Scopus)

22. Preparation and characterization of surface modified gamma-Fe2O3 (maghemite)-silica nanocomposites used for the purification of benzaldehyde lyase

TURAL B., Sopaci S. B., ÖZKAN N., DEMİR A. G., Volkan M.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS , cilt.72, sa.8, ss.968-973, 2011 (SCI-Expanded, Scopus)

23. Origin of Lyotropic Liquid Crystalline Mesophase Formation and Liquid Crystalline to Mesostructured Solid Transformation in the Metal Nitrate Salt-Surfactant Systems

Albayrak C., ÖZKAN N., Dag O.

LANGMUIR , cilt.27, sa.3, ss.870-873, 2011 (SCI-Expanded, Scopus)

24. CHARACTERISTICS OF FLAXSEED OIL FROM TWO DIFFERENT FLAX PLANTS

Zhang Z., Wang L., Lİ D., Li S., ÖZKAN N.

INTERNATIONAL JOURNAL OF FOOD PROPERTIES , cilt.14, sa.6, ss.1286-1296, 2011 (SCI-Expanded, Scopus)

25. Rheological properties of extruded dispersions of flaxseed-maize blend

WU M., Lİ D., WANG L., ÖZKAN N., Mao Z.

JOURNAL OF FOOD ENGINEERING , cilt.98, sa.4, ss.480-491, 2010 (SCI-Expanded, Scopus)

26. Anti-thixotropic properties of waxy maize starch dispersions with different pasting conditions

Wang B., Li D., Wang L., ÖZKAN N.

CARBOHYDRATE POLYMERS , cilt.79, sa.4, ss.1130-1139, 2010 (SCI-Expanded, Scopus)

27. Dynamic viscoelastic properties of sweet potato studied by dynamic mechanical analyzer

Li Q., Lİ D., Wang L., ÖZKAN N., Mao Z.

CARBOHYDRATE POLYMERS , cilt.79, sa.3, ss.520-525, 2010 (SCI-Expanded, Scopus)

28. Effect of concentrated flaxseed protein on the stability and rheological properties of soybean oil-in-water emulsions

Wang B., Li D., Wang L., ÖZKAN N.

JOURNAL OF FOOD ENGINEERING , cilt.96, sa.4, ss.555-561, 2010 (SCI-Expanded, Scopus)

29. Morphological properties and thermoanalysis of micronized cassava starch

Ren G., Li D., Wang L., ÖZKAN N., Mao Z.

CARBOHYDRATE POLYMERS , cilt.79, sa.1, ss.101-105, 2010 (SCI-Expanded, Scopus)

30. Production of hemicellulose-based biodegradable films from agricultural wastes

Bahcegul E., ÖZKAN N., Bakir U.

NEW BIOTECHNOLOGY , cilt.25, 2009 (SCI-Expanded, Scopus)

31. Rheological properties of waxy maize starch and xanthan gum mixtures in the presence of sucrose

Wang B., Wang L., Li D., Ozkan N., Li S., Mao Z.

CARBOHYDRATE POLYMERS , cilt.77, sa.3, ss.472-481, 2009 (SCI-Expanded, Scopus)

32. Preparation and characterization of polymer coated superparamagnetic magnetite nanoparticle agglomerates

TURAL B., ÖZKAN N., VOLKAN M.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS , cilt.70, sa.5, ss.860-866, 2009 (SCI-Expanded, Scopus)

33. Starch pastes thinning during high-pressure homogenization

Che L., Wang L., Li D., Bhandari B., Oezkan N., Chen X. D., et al.

CARBOHYDRATE POLYMERS , cilt.75, sa.1, ss.32-38, 2009 (SCI-Expanded, Scopus)

34. Study on Creep Properties of Japonica Cooked Rice and Its Relationship with Rice Chemical Compositions and Sensory Evaluation

Chang S., Li D., Lan Y., ÖZKAN N., Shi J., Chen X. D., et al.

INTERNATIONAL JOURNAL OF FOOD ENGINEERING , cilt.5, sa.3, 2009 (SCI-Expanded, Scopus)

35. Rheological properties of dilute aqueous solutions of cassava starch

Che L., Li D., Wang L., ÖZKAN N., Chen X. D., Mao Z.

CARBOHYDRATE POLYMERS , cilt.74, sa.3, ss.385-389, 2008 (SCI-Expanded, Scopus)

36. Effect of flaxseed gum addition on rheological properties of native maize starch

Wang Y., Wang L., Li D., Oezkan N., Chen X. D., Mao Z.

JOURNAL OF FOOD ENGINEERING , cilt.89, sa.1, ss.87-92, 2008 (SCI-Expanded, Scopus)

37. Influence of alfalfa powder concentration and granularity on rheological properties of alfalfa-wheat dough

HAO C., WANG L., Lİ D., Oezkan N., WANG D., CHEN X. D., et al.

JOURNAL OF FOOD ENGINEERING , cilt.89, sa.2, ss.137-141, 2008 (SCI-Expanded, Scopus)

38. Evaluation of natural zeolite as a viscosity-modifying agent for cement-based grouts

Sahmaran M., ÖZKAN N., KESKİN S., UZAL B., YAMAN İ. Ö., Erdem T. K.

CEMENT AND CONCRETE RESEARCH , cilt.38, sa.7, ss.930-937, 2008 (SCI-Expanded, Scopus)

39. Preparation and characterization of ni-nitrilotriacetic acid bearing Poly(Methacrylic acid) coated superparamagnetic magnetite nanoparticles

TURAL B., KAYA M., Oezkan N., Volkan M.

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY , cilt.8, sa.2, ss.695-701, 2008 (SCI-Expanded, Scopus)

40. Optimization of ethanol-water extraction of lignans from flaxseed

Zhang Z., Li D., Wang L., Ozkan N., Chen X. D., Mao Z., et al.

SEPARATION AND PURIFICATION TECHNOLOGY , cilt.57, sa.1, ss.17-24, 2007 (SCI-Expanded, Scopus)

41. Dynamic Viscoelastic Properties of Rice Kernels Studied by Dynamic Mechanical Analyzer

CHEN K., Lİ D., WANG L., ÖZKAN N., CHEN X. D., MAO Z.

INTERNATIONAL JOURNAL OF FOOD ENGINEERING , cilt.3, sa.2, 2007 (SCI-Expanded, Scopus)

42. Effect of high-pressure homogenization on the structure of cassava starch

CHE L., Li D., Wang L., Oezkan N., Chen X. D., Mao Z.

INTERNATIONAL JOURNAL OF FOOD PROPERTIES , cilt.10, sa.4, ss.911-922, 2007 (SCI-Expanded, Scopus)

43. Stickiness, functionality, and microstructure of food powders

Chen X. D., Ozkan N.

DRYING TECHNOLOGY , cilt.25, ss.959-969, 2007 (SCI-Expanded, Scopus)

44. Influences of Microemulsion Cross-linking Reaction and Ball-milling on Particle Size Characteristics of Potato and Maize Starches

Zhou Y., Li D., Wang L., ÖZKAN N., Chen X. D., MAO Z.

INTERNATIONAL JOURNAL OF FOOD ENGINEERING , cilt.2, sa.4, 2006 (SCI-Expanded, Scopus)

45. Removal of a model protein foulant from metal surfaces

Xin H., CHEN X. D., Ozkan N.

AICHE JOURNAL , cilt.50, sa.8, ss.1961-1973, 2004 (SCI-Expanded, Scopus)

46. Combined ohmic and plate heating of hamburger patties: Quality of cooked patties

Özkan N., HO I., Farid M.

Journal of Food Engineering , cilt.63, sa.2, ss.141-145, 2004 (SCI-Expanded, Scopus)

47. On-line fouling/cleaning detection by measuring electric resistance-equipment development and application to milk fouling detection and chemical cleaning monitoring

Chen X. D., Li D. X., Lin S. X., Özkan N.

Journal of Food Engineering , cilt.61, sa.2, ss.181-189, 2004 (SCI-Expanded, Scopus)

48. Effects of time, temperature, and pressure on the cake formation of milk powders

Özkan N., WITHY B., CHEN X. D.

Journal of Food Engineering , cilt.58, sa.4, ss.355-361, 2003 (SCI-Expanded, Scopus)

49. Cleaning rate in the uniform cleaning stage for whey protein gel deposits

XİN H., Chen X., Ozkan N.

FOOD AND BIOPRODUCTS PROCESSING , cilt.80, ss.240-246, 2002 (SCI-Expanded, Scopus)

50. Characterization of stickiness and cake formation in whole and skim milk powders

Özkan N., Walisinghe N., CHEN X. D.

Journal of Food Engineering , cilt.55, sa.4, ss.293-303, 2002 (SCI-Expanded, Scopus)

51. Whey protein-based gel as a model material for studying initial cleaning mechanisms of milk fouling

XİN H., Chen X., Ozkan N.

JOURNAL OF FOOD SCIENCE , cilt.67, sa.7, ss.2702-2711, 2002 (SCI-Expanded, Scopus)

52. Application of a depth sensing indentation hardness test to evaluate the mechanical properties of food materials

Ozkan N., Xin H., CHEN X.

JOURNAL OF FOOD SCIENCE , cilt.67, sa.5, ss.1814-1820, 2002 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

53. Rheological analysis of ceramic pastes

Özkan N., OYSU C., Briscoe B. J., Aydin I.

Journal of the European Ceramic Society , cilt.19, sa.16, ss.2883-2891, 1999 (SCI-Expanded, Scopus)

54. Preparation of ceria-gadolinia electrolytes by the tape rolling technique

Ozkan N., BRISCOE B.

JOURNAL OF MATERIALS RESEARCH , cilt.13, sa.3, ss.665-674, 1998 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

55. The characterisation of die friction as a means to reduce component machining and attain near-net shape form

Özkan N., BRISCOE B., AYDIN I.

Tribology Series , cilt.34, ss.365-369, 1998 (Scopus)

56. Drying kinetics of water-based ceramic suspensions for tape casting

Briscoe B., Lo Biundo G., Özkan N.

Ceramics International , cilt.24, sa.5, ss.347-357, 1998 (SCI-Expanded, Scopus)

57. Modeling of powder compaction: A review

Aydin I., BRISCOE B., Ozkan N.

MRS BULLETIN , cilt.22, sa.12, ss.45-51, 1997 (SCI-Expanded, Scopus)

58. Optimisation of ceramic suspensions

BRISCOE B. J., KHAN A. U., LUCKHAM P. F., Özkan N.

Key Engineering Materials , ss.281-284, 1997 (SCI-Expanded, Scopus)

59. Modelling of binder burnout process for ceramic compacts

BRISCOE B., SAVVAS T., Özkan N.

Key Engineering Materials , ss.678-681, 1997 (SCI-Expanded, Scopus)

60. Drying of aqueous ceramic suspensions

BRISCOE B., LO BIUNDO G., Özkan N.

Key Engineering Materials , ss.354-357, 1997 (SCI-Expanded, Scopus)

61. Shape prediction procedure for die pressed ceramic compacts

Özkan N., BRISCOE B.

Key Engineering Materials , ss.670-673, 1997 (SCI-Expanded, Scopus)

62. Compaction behaviour of agglomerated alumina powders

Briscoe B. J., Özkan N.

Powder Technology , cilt.90, sa.3, ss.195-203, 1997 (SCI-Expanded, Scopus)

63. Characterization of die pressed green compacts

ÖZKAN N., BRİSCOE B. J.

Journal Of The European Ceramic Society , cilt.17, ss.697-711, 1997 (SCI-Expanded, Scopus)

64. Overall shape of sintered alumina compacts

Ozkan N., BRISCOE B.

CERAMICS INTERNATIONAL , cilt.23, sa.6, ss.521-536, 1997 (SCI-Expanded, Scopus)

65. Characterization of ceramic pastes by an indentation hardness test

BRISCOE B., Ozkan N.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY , cilt.17, sa.14, ss.1675-1683, 1997 (SCI-Expanded, Scopus)

66. The surface topography of compacted agglomerates; A means to optimize compaction conditions

Ozkan N., BRISCOE B.

POWDER TECHNOLOGY , cilt.86, sa.2, ss.201-207, 1996 (SCI-Expanded, Scopus)

67. 3-D PROFILES AND SURFACE-TOPOGRAPHY OF ALUMINA COMPACTS

AYDIN I., BRISCOE B., OZKAN N.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE , cilt.35, sa.2, ss.345-352, 1995 (SCI-Expanded, Scopus)

68. Prediction of overall shape of sintered alumina compacts

Özkan N., Briscoe B. J.

Journal of the European Ceramic Society , cilt.14, sa.2, ss.143-151, 1994 (SCI-Expanded, Scopus)

69. DEVELOPMENT OF PB-RICH (BI, PB)3SR2CA2CU1OX PHASE DURING REFORMATION OF LEAD DOPED 2223 SUPERCONDUCTING PHASE FROM MELT QUENCHED GLASS

OZKAN N., GLOWACKI B.

PHYSICA C , cilt.194, ss.157-162, 1992 (SCI-Expanded, Scopus)

70. INFRARED ZONE-MELTING PROCESS FOR YBA2CU3O7-DELTA WIRES

OZKAN N., GLOWACKI B., ROBINSON E., FREEMAN P.

JOURNAL OF MATERIALS RESEARCH , cilt.6, sa.9, ss.1829-1837, 1991 (SCI-Expanded, Scopus)

71. FORMATION OF YBA2CU3O7-X THICK-FILMS BY A DIFFUSION PROCESS BETWEEN Y2BACUO5 AND (BACUO2, CUO)

FREEMAN P., OZKAN N., HONNEYBALL P., GLOWACKI B.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY , cilt.4, 1991 (SCI-Expanded, Scopus)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 5

1. ELECTROCHEMICAL HYDROGEN SEPARATION FROM REFORMATE USING POLYBENZIMIDAZOLE/MOF COMPOSITE MEMBRANES

Durmuş G. N. B., Eren E. O., Devrim Y., Çolpan C. Ö., Özkan N.

23rd World Hydrogen Energy Conference: Bridging Continents by H2, WHEC 2022, İstanbul, Türkiye, 26 - 30 Haziran 2022, ss.403-405, (Tam Metin Bildiri)

2. Evaluation of the Properties of Corn Cob Hemicellulose Based Biodegradable Films Obtained by Extrusion and Solvent Casting Methods

Akınalan Balık B., Özkan N., Bölükbaşı U.

35th INTERNATIONAL CONFERENCE of THE POLYMER PROCESSING SOCIETY, İzmir, Türkiye, 26 - 30 Mayıs 2019, (Yayınlanmadı) Sürdürülebilir Kalkınma

3. Fabrication of cross-linked Polybenzimidazole membranes for high temperature PEM fuel cells and investigation of the amount of cross-linker used on membrane performance

ÖZDEMİR y., ÖZKAN N., DEVRİM Y.

The Second International Hydrogen Technologies Congress (IHTEC-2017), Adana, Türkiye, 15 - 18 Mart 2017, ss.47-52, (Tam Metin Bildiri)

4. Rheology of alumina in organic and aqueous media and its effect on the final formed ceramic bodies

BRISCOE B., KHAN A., LUCKHAM P., Ozkan N.

XIIth International Congress on Rheology, QIUEBEC CITY, Kanada, 18 - 23 Ağustos 1996, ss.484, (Tam Metin Bildiri)

5. Influence of the High Tc Superconducting Particles Orientation During Semi-Wet Extrusion on the Critical Current Anisotropy

Özkan N., Glowacki B.

7th CIMTEC World Ceramics Congress, Trieste, İtalya, 02 Temmuz 1990, ss.663-671, (Tam Metin Bildiri)

Kitaplar 1

1. Ohmic Cooking of Food

FARİD M. M., WEİJİAN K., ÖZKAN N.

Ohmic Heating in Food Processing, Hosahalli S . Ramaswamy , Michele Marcotte , Sudhir Sastry , Khalid Abdelrahim, Editör, CRS Press, ss.411-422, 2014

Metrikler

Yayın

Yayın (WoS)

Yayın (Scopus)

Atıf (WoS)

1877

H-İndeks (WoS)

Atıf (Scopus)

2293

H-İndeks (Scopus)

Proje

Tez Danışmanlığı

Açık Erişim

BM Sürdürülebilir Kalkınma Amaçları

Yayınlar & Eserler

Yayın

Yayın (WoS)

Yayın (Scopus)

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Proje

Tez Danışmanlığı

Açık Erişim