Yayınlar & Eserler

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Effect of microwave heating on the interdiffusion in BaTiO3–SrTiO3 binary ceramic system

SÜER B., DERİCİOĞLU A. F.
Materials Chemistry and Physics , cilt.317, 2024 (SCI-Expanded) identifier

Functionalization of glass fiber woven fabrics by indium tin oxide (ITO) coatings for electromagnetic wave absorption

Daricioglu M. O., Durucan C., Dericioğlu A. F.
Materials Science and Engineering B: Solid-State Materials for Advanced Technology , cilt.294, 2023 (SCI-Expanded) identifier identifier

A Comparative Study of Effects of Additive Particle Size and Content on Wetting Behavior and Brazing Performance of C/SiC Composite

Saltik S., Esen Z., Dericioğlu A. F.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.32, sa.13, ss.5946-5955, 2023 (SCI-Expanded) identifier identifier

Effect of post fabrication aging treatment on the microstructure, crystallographic texture and elevated temperature mechanical properties of IN718 alloy fabricated by selective laser melting

Ozer S., Bilgin G. M., Davut K., Esen Z., DERİCİOĞLU A. F.
Journal of Materials Processing Technology , cilt.306, 2022 (SCI-Expanded) identifier identifier

Selective laser melting of Nano-TiN reinforced 17-4 PH stainless steel: Densification, microstructure and mechanical properties

Ozsoy A., AYDOĞAN GÜNGÖR E., DERİCİOĞLU A. F.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.836, 2022 (SCI-Expanded) identifier identifier

Microstructural and texture evolution during thermo-hydrogen processing of Ti6Al4V alloys produced by electron beam melting

Dogu M. N., Esen Z., Davut K., Tan E., Gumus B., Dericioğlu A. F.
MATERIALS CHARACTERIZATION , cilt.168, 2020 (SCI-Expanded) identifier identifier

Effect of CNT impregnation on the mechanical and thermal properties of C/C-SiC composites

Tulbez S., ESEN Z., DERİCİOĞLU A. F.
ADVANCED COMPOSITES AND HYBRID MATERIALS , cilt.3, sa.2, ss.177-186, 2020 (SCI-Expanded) identifier identifier

Corrosion behaviours of Ti6Al4V-Mg/Mg-Alloy composites

Esen Z., Ocala E. B., Akkaya A., Gurcay B., Ozcan C., Ozgumus B. A., et al.
CORROSION SCIENCE , cilt.166, 2020 (SCI-Expanded) identifier identifier

Comparison of the short and long-term degradation behaviors of as-cast pure Mg, AZ91 and WE43 alloys

Ocal E. B., Esen Z., Aydinol K., Dericioğlu A. F.
MATERIALS CHEMISTRY AND PHYSICS , cilt.241, 2020 (SCI-Expanded) identifier identifier

All 3-D Printed Free-Space Setup for Microwave Dielectric Characterization of Materials

Hajisaeid E., DERİCİOĞLU A. F., Akyurtlu A.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT , cilt.67, sa.8, ss.1877-1886, 2018 (SCI-Expanded) identifier identifier

Optimization of the mechanical properties of Ti-6Al-4V alloy fabricated by selective laser melting using thermohydrogen processes

BILGIN G. M., Esen Z., Akin S. K., DERİCİOĞLU A. F.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.700, ss.574-582, 2017 (SCI-Expanded) identifier identifier

Effect of Sn Alloying on the Diffusion Bonding Behavior of Al-Mg-Si Alloys

Atabay S. E., Esen Z., DERİCİOĞLU A. F.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE , sa.7, ss.3181-3187, 2017 (SCI-Expanded) identifier identifier

Nacre-mimetic bulk lamellar composites reinforced with high aspect ratio glass flakes

GÜNER S., DERİCİOĞLU A. F.
BIOINSPIRATION & BIOMIMETICS , cilt.12, sa.1, 2017 (SCI-Expanded) identifier identifier identifier

Nacre-mimetic epoxy matrix composites reinforced by two-dimensional glass reinforcements

DERİCİOĞLU A. F., DERİCİOĞLU A. F.
RSC ADVANCES , cilt.6, sa.39, ss.33184-33196, 2016 (SCI-Expanded) identifier identifier

Morphology and magnetic properties of barium hexaferrite ceramics synthesized in x wt% NaCl-(100-x) wt% KCL molten salts

Aydogan E., Kaya S., DERİCİOĞLU A. F.
Ceramics International , cilt.40, ss.2331-2336, 2014 (SCI-Expanded) identifier identifier

Monotonic and cyclic compressive behavior of superelastic TiNi foams processed by sintering using magnesium space holder technique

Nakas G. I., DERİCİOĞLU A. F., Bor S.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.582, ss.140-146, 2013 (SCI-Expanded) identifier identifier

Kinematic and Mechanical Profile of the Self-Actuation of Thermosalient Crystal Twins of 1,2,4,5-Tetrabromobenzene: A Molecular Crystalline Analogue of a Bimetallic Strip

Sahoo S. C., Sinha S. B., Kiran M. S. R. N., Ramamurty U., DERİCİOĞLU A. F., Reddy C. M., et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY , cilt.135, sa.37, ss.13843-13850, 2013 (SCI-Expanded) identifier identifier

Titanium-magnesium based composites: Mechanical properties and in-vitro corrosion response in Ringer's solution

ESEN Z., Dikici B., Duygulu O., DERİCİOĞLU A. F.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.573, ss.119-126, 2013 (SCI-Expanded) identifier identifier

Effect of reinforcement surface functionalization on the mechanical properties of nacre-like bulk lamellar composites processed by a hybrid conventional method

Gurbuz S. N., DERİCİOĞLU A. F.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS , cilt.33, sa.4, ss.2011-2019, 2013 (SCI-Expanded) identifier identifier identifier

Templated deposition of porous fullerene-C-60 in the interior of siliceous sponge spicules as a biogenic microvessel

DERİCİOĞLU A. F., Naumov P., Tanaka Y.
JOURNAL OF MATERIALS RESEARCH , cilt.27, sa.22, ss.2851-2857, 2012 (SCI-Expanded) identifier identifier

Fatigue behavior of TiNi foams processed by the magnesium space holder technique

Nakas G. I., DERİCİOĞLU A. F., Bor S.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS , cilt.4, sa.8, ss.2017-2023, 2011 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier identifier

Extensive deformation behavior of an all-oxide Al2O3-TiO2 nanostructured multilayer ceramic at room temperature

Dericioglu A. F., Liu Y. F., Kagawa Y.
JOURNAL OF MATERIALS RESEARCH , cilt.24, sa.11, ss.3387-3396, 2009 (SCI-Expanded) identifier identifier

An efficient hybrid conventional method to fabricate nacre-like bulk nano-laminar composites

Ekiz O. O., DERİCİOĞLU A. F., Kakisawa H.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS , cilt.29, sa.6, ss.2050-2054, 2009 (SCI-Expanded) identifier identifier

Electromagnetic wave absorption potential of SiC-based ceramic woven fabrics in the GHz range

Tan E., Kagawa Y., DERİCİOĞLU A. F.
JOURNAL OF MATERIALS SCIENCE , cilt.44, sa.5, ss.1172-1179, 2009 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Effect of Microstructure on the Mechanical Behavior of Reactive Magnetron Sputtered Al2O3/TiO2 Multilayer Ceramics

Dericioglu A. F.
MATERIALS TRANSACTIONS , cilt.49, sa.11, ss.2714-2722, 2008 (SCI-Expanded) Creative Commons License identifier identifier

Variation of mechanical properties of TiO2 during Li insertion

Lindstrom H., DERİCİOĞLU A. F., Kamei M., Kagawa Y.
ELECTROCHEMICAL AND SOLID STATE LETTERS , cilt.10, sa.5, 2007 (SCI-Expanded) identifier identifier

Fabrication of alumina/polyimide multi-layered material by sputtering and vapor deposition polymerization

Naganuma T., Kakisawa H., Dericioglu A. F., Kagawa Y.
JOURNAL OF THE CERAMIC SOCIETY OF JAPAN , cilt.114, sa.1332, ss.713-715, 2006 (SCI-Expanded) Creative Commons License identifier identifier

Measurement of residual stress in air plasma-sprayed Y2O3-ZrO2 thermal barrier coating system using micro-Raman spectroscopy

Tanaka M., Hasegawa M., DERİCİOĞLU A. F., Kagawa Y.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.419, ss.262-268, 2006 (SCI-Expanded) identifier identifier

Processing and characterisation of model optomechanical composites in the system sapphire fibre/borosilicate glass matrix

Boccaccini A. R., Acevedo D., DERİCİOĞLU A. F., Jana C.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , cilt.169, sa.2, ss.270-280, 2005 (SCI-Expanded) identifier identifier

Improvement of fracture resistance in a glass matrix optomechanical composite by minicomposite unit bridging

DERİCİOĞLU A. F., KAGAWA Y.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.406, ss.142-151, 2005 (SCI-Expanded) identifier identifier

Effect of chemical composition on the optical properties and fracture toughness of transparent magnesium aluminate spinel ceramics

DERİCİOĞLU A. F., Boccaccini A. R., Dlouhy I., Kagawa Y.
MATERIALS TRANSACTIONS , cilt.46, sa.5, ss.996-1003, 2005 (SCI-Expanded) Creative Commons License identifier identifier

Damage behavior of air-plasma-sprayed thermal barrier coatings under foreign object impact

DERİCİOĞLU A. F., Zhu S., Kagawa Y., Kasano H.
ADVANCED ENGINEERING MATERIALS , cilt.5, sa.10, ss.735-737, 2003 (SCI-Expanded) identifier identifier

Mechanical behaviour of Al2O3-ZrO2 minicomposite reinforced glass matrix optomechanical composite

DERİCİOĞLU A. F., KAGAWA Y.
MATERIALS SCIENCE AND TECHNOLOGY , cilt.19, sa.8, ss.1119-1124, 2003 (SCI-Expanded) identifier identifier

Effect of grain boundary microcracking on the light transmittance of sintered transparent MgAl2O4

DERİCİOĞLU A. F., KAGAWA Y.
Journal Of The European Ceramic Society , cilt.23, ss.951-959, 2003 (SCI-Expanded) identifier identifier

Fail-safe light transmitting SiC fiber-reinforced spinel matrix optomechanical composite

DERİCİOĞLU A. F., KAGAWA Y.
JOURNAL OF MATERIALS SCIENCE , cilt.37, sa.3, ss.523-530, 2002 (SCI-Expanded) identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

Wetting behavior and reaction layer formation in C/SiC composite-titanium alloy joints

Saltik S., Esen Z., Dericioğlu A. F.
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES , cilt.8, sa.4, ss.3685-3705, 2022 (ESCI) identifier identifier

Powder Core Materials

DERİCİOĞLU A. F.
TRANSFORMERS: ANALYSIS, DESIGN, AND MEASUREMENT , ss.447-460, 2013 (Hakemli Dergi) identifier

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

INTERFACIAL REACTION KINETICS AND MICROSTRUCTURAL EVOLUTION OF C/SiC COMPOSITES TO TITANIUM ALLOY JOINTS

TÜLBEZ S., DERİCİOĞLU A. F.
10th International Conference on High Temperature Ceramic Matrix Composites –HT-CMC 10, Bordeaux, Fransa, 22 - 26 Eylül 2019

Production of Ti-6Al-4V Alloy by 3D Electron Beam Melting Technique and Development of its Post Treatments

DOĞU M. N., ESEN Z., DERİCİOĞLU A. F., Tan E., gümüs b.
TMS 2019 Annual Meeting Exhibition, San-Antonio, Kuzey Mariana Adaları, 10 - 14 Mart 2019

PRODUCTION AND CHARACTERIZATION OF Ti-Mg COMPOSITES FOR VARIOUS APPLICATIONS

BÜTEV E., ESEN Z., DERİCİOĞLU A. F.
IMMC’19. International Metallurgy Materials Congress, 25 - 27 Ekim 2018

Investigations on Alternative Matrix Materials Towards the Efficiency of SiC Formation in C/SiC Ceramic Composites

TÜLBEZ S., ESEN Z., DERİCİOĞLU A. F.
IMMC’19 International Metallurgy Materials Congress, 25 - 27 Ekim 2018

Property Development of EBM Processed Ti-6Al-4V Alloy Through Hydrogen Treatments

DOĞU M. N., ESEN Z., Tan E., Gümüş B., DERİCİOĞLU A. F.
IMMC’19 International Metallurgy Materials Congress, 25 - 27 Ekim 2018

The Effect of Thermohydrogen Process on the Mechanical Properties of the Ti-6Al-4V Alloy Produced by Selective Laser Melting

Bilgin G. M., ESEN Z., DERİCİOĞLU A. F.
IMMC’19 International Metallurgy Materials Congress, 25 - 27 Ekim 2018

Effect of the Cu Alloying on the Precipitation Behavior of Al-Mg-Si Alloys

Özer S., DERİCİOĞLU A. F.
IMMC’19 International Metallurgy Materials Congress, 25 - 27 Ekim 2018

A Novel Experimental Method for Microwave Dielectric Characterization of Flexible or Rigid Thin Sheets

Hajisaeid E., Dericioglu A. F., Akyurtlu A.
89th ARFTG Microwave Measurement Conference (ARFTG), Hawaii, Amerika Birleşik Devletleri, 09 Haziran 2017 identifier identifier

Tailoring the Mechanical Properties of Additively Manufactured Ti-6Al-4V Alloys by Post Processing

Bilgin G. M., ESEN Z., Akin S. K., DERİCİOĞLU A. F.
TMS 2017 146th Annual Meeting and Exhibition, San Diego, Amerika Birleşik Devletleri, 26 Şubat - 02 Mart 2017

Effect of Alloying Elements on Diffusing Bonding Parameters in Al6063

Atabay S. E., DERİCİOĞLU A. F.
TMS 2017 146th Annual Meeting and Exhibition, San Diego, Amerika Birleşik Devletleri, 26 Şubat - 02 Mart 2017

Optimization of the Diffusion Bonding Process for Al 6063 Alloy

Atabay S. E., DERİCİOĞLU A. F.
TMS 2017 146th Annual Meeting and Exhibition, San Diego, Amerika Birleşik Devletleri, 26 Şubat - 02 Mart 2017

Flexible Silver Nanowire Networks for High Frequency Shielding

Alpugan E., COŞKUN Ş., DERİCİOĞLU A. F., ÜNALAN H. E.
MRS Fall Meeting' 2016, 27 Kasım - 02 Aralık 2016

Microstructural Refinement of Ti 6Al 4V Alloy Fabricated by Additive Manufacturing Using Th ermochemical Processes

Bilgin G. M., ESEN Z., Kuşhan Akın Ş. R., DERİCİOĞLU A. F.
18th International Metallurgy & Materials Congress, İstanbul, Türkiye, 29 Eylül - 01 Ekim 2016, ss.398-401

Synthesis of BaHF Ceramics by Microwave Heating

Emel E., Tulbez S., DERİCİOĞLU A. F.
18th International Metallurgy & Materials Congress, İstanbul, Türkiye, 29 Eylül - 01 Ekim 2016, ss.166-169

High Strength Copper Alloys for Extreme Temperature Conditions

Dincer O., Pehlivanoglu K. M., DERİCİOĞLU A. F.
18th International Metallurgy & Materials Congress, İstanbul, Türkiye, 29 Eylül - 01 Ekim 2016, ss.693-696

Optimization of the Diff usion Bonding Parameters for 6063 Aluminum Alloy

Atabay S. E., DERİCİOĞLU A. F.
18th International Metallurgy & Materials Congress, İstanbul, Türkiye, 29 Eylül - 01 Ekim 2016, ss.637-640

Optimization of Pyrolysis and Liquid Silicon Infiltration Parameters for the Processing of C C SiC Composites

Tulbez S., ESEN Z., DERİCİOĞLU A. F.
18th International Metallurgy & Materials Congress, İstanbul, Türkiye, 29 Eylül - 01 Ekim 2016, ss.48-51

Silver nanowire networks for flexible electromagnetic interface shields

Alpugan E., COŞKUN Ş., DERİCİOĞLU A. F., ÜNALAN H. E.
TMS Meeting' 2016, 14 - 18 Şubat 2016

Optimization of the Mechanical Properties of the Ti 6Al 4V Alloy Fabricated By Additive Manufacturing Using Thermochemical Processes

Bilgin G. M., DERİCİOĞLU A. F., ESEN Z., Kushan Akin S. R.
TMS 2016 145th ANNUAL MEETING & EXHIBITION, Nashville, Amerika Birleşik Devletleri, 14 - 18 Şubat 2016

Effect of Interlayer Material on the Mechanical Properties of Diffusion Bonded Aluminum Joints

Atabay S. E., DERİCİOĞLU A. F.
TMS 2016 145th ANNUAL MEETING & EXHIBITION, Nashville, Amerika Birleşik Devletleri, 14 - 18 Şubat 2016

Electromagnetic Interface Shielding Behavior of Silver Nanowire Networks

alpugan e., COŞKUN Ş., DERİCİOĞLU A. F., ÜNALAN H. E.
MRS Fall Meeting' 2015, Amerika Birleşik Devletleri, 29 Kasım - 04 Aralık 2015

Processing and Characterization of Carbon Fiber Reinforced Silicon Carbide C SiC Matrix Composites

Tülbez S., ESEN Z., DERİCİOĞLU A. F.
TMS 2015 144th ANNUAL MEETING & EXHIBITION, Orlando, Amerika Birleşik Devletleri, 15 - 19 Mart 2015

Formation Kinetics, Morphology and Magnetic Properties of BaHF Ceramics Synthesized in x wtNaCl- (100-x) wt KCl Molten Salts

Kaya S., AYDOĞAN GÜNGÖR E., DERİCİOĞLU A. F.
Advanced Materials World Congress (AMWC), 16 Eylül - 19 Haziran 2013

Processing Characterization of Textured Barium Ferrite Ceramics

Kaya S., AYDOĞAN GÜNGÖR E., DERİCİOĞLU A. F.
IMMC 2012, 13 - 15 Eylül 2012

Effect of microwave and conventional sintering on properties of soft magnetic Ni-Fe alloys

Erdem D., DERİCİOĞLU A. F.
European International Powder Metallurgy Congress and Exhibition, Euro PM 2011, Barcelona, İspanya, 9 - 12 Ekim 2011, cilt.3 identifier

Developing Pathways for Bioinspired Bulk Nano-Laminar Composites

AYDOĞAN GÜNGÖR E., DERİCİOĞLU A. F.
Junior Euromat 2010, 26 - 30 Temmuz 2010

Interfacial characterisation in transparent spinel matrix reinforced by SiC fibre

Chlup Z., Dlouhy I., Guerbuez S., DERİCİOĞLU A. F., Kozak V.
3rd International Conference on Fractography of Advanced Ceramics, Stara Lesna, Slovakya, 7 - 10 Eylül 2008, cilt.409, ss.252-253 identifier identifier

Improvement of fracture resistance in a glass matrix optomechanical composite reinforced by Al2O3-ZrO2 minicomposite

Dericioglu A. F., Zhu S., Kagawa Y.
26th Annual Conference on Composites, Advanced Ceramics, Materials, and Structures: A, Cocoa Beach, FL, Amerika Birleşik Devletleri, 13 - 18 Ocak 2002, cilt.23, ss.485-492 identifier

Optical and mechanical properties of fiber-reinforced ceramic matrix optically transparent composites

Dericioglu A. F., Kagawa Y.
25th Annual Conference on Composites, Advanced Ceramics, Materials and Structures: A, Cocoa Beach, FL, Amerika Birleşik Devletleri, 21 - 27 Ocak 2001, cilt.22, ss.635-642 identifier identifier

Production of copper-based shape memory alloy using powder metallurgy methods Bakir esasli şeki̇l bellekli̇ alaşimlarin toz metalurji̇si̇ yöntemi̇ i̇le üreti̇mi̇

ÖGEL B., Dericioǧlu A. F.
Ulusal Toz Metalurjisi Konferansi: Second National Powder Metallurgy Conference, Ankara, Türkiye, 15 - 17 Eylül 1999, ss.483-488 identifier

Metrikler

Yayın

67

Atıf (WoS)

687

H-İndeks (WoS)

15

Atıf (Scopus)

889

H-İndeks (Scopus)

16

Proje

25

Tez Danışmanlığı

27

Açık Erişim

19
BM Sürdürülebilir Kalkınma Amaçları