Resin-to-laminate translation of mechanical and fracture responses in GFRP laminates with a nanomodified epoxy matrix
Composite Structures, cilt.401, 2027 (SCI-Expanded, Scopus)
- Yayın Türü: Makale / Tam Makale
- Cilt numarası: 401
- Basım Tarihi: 2027
- Doi Numarası: 10.1016/j.compstruct.2026.121076
- Dergi Adı: Composite Structures
- Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Chimica, Compendex, INSPEC, Academic Search Ultimate (EBSCO), Engineering Source (EBSCO)
- Anahtar Kelimeler: Carbon nanotubes, Delamination, Fracture toughness, GFRP laminates
- Orta Doğu Teknik Üniversitesi Adresli: Evet
Özet
Nanomodified epoxy systems are commonly screened at the resin-level, yet it is difficult to assess which merits survive after transferring to composite laminates, where fiber architecture, interfacial characteristics, and manufacturing effects jointly govern the laminate response. This study presents a sequential resin-to-laminate strategy within a single low-viscosity epoxy system. Nanofiller dispersed epoxy nanocomposite processing parameters were screened, after which nanofiller type and content were evaluated using combined tensile and fracture criteria. The selected nanofiller dispersed epoxy nanocomposite formulation was applied as the matrix of GFRP laminates, and their properties were evaluated through intralaminar, interlaminar, and fractographic characterization. At the epoxy nanocomposite level, 0.35 wt% functionalized carbon nanotubes (fCNTs) dispersed at 150 W for 60 min provided the best overall balance, preserving tensile strength while increasing fracture energy by 41 %. After transfer to laminates, the benefits were selective rather than uniform: mean longitudinal tensile properties were lower, whereas in-plane shear strength and interlaminar fracture resistance increased by up to 35 %. Fractography revealed greater matrix retention, more irregular fracture features, and localized fiber breakage, indicating stronger matrix contribution. The results showed that nanofiller dispersed epoxy-level gains carried over primarily into matrix- and interface-dominated laminate properties, particularly shear and delamination resistance.