Prof. Dr. HASAN NEVZAT ÖZGÜVEN

Makaleler 51

1. The Tribomechadynamics Research Challenge: Confronting blind predictions for the linear and nonlinear dynamics of a thin-walled jointed structure with measurement results

Krack M., Brake M. R., Schwingshackl C., Gross J., Hippold P., Lasen M., et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING , cilt.224, 2025 (SCI-Expanded, Scopus)

2. Non-Linear Dynamic Modeling and Analysis of Split-Torque Face-Gear Drive Systems

Aydogan M. O., Saribay Z. B., ÖZGÜVEN H. N.

JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME , cilt.145, sa.3, 2023 (SCI-Expanded, Scopus)

3. Experimental Modal Analysis of Nonlinear Amplified Piezoelectric Actuators by Using Response-Controlled Stepped-Sine Testing

Koyuncu A., Karaagacli T., ŞAHİN M., ÖZGÜVEN H. N.

EXPERIMENTAL MECHANICS , cilt.62, sa.9, ss.1579-1594, 2022 (SCI-Expanded, Scopus)

4. Experimental Quantification and Validation of Modal Properties of Geometrically Nonlinear Structures by Using Response-Controlled Stepped-Sine Testing

Karaagacli T., ÖZGÜVEN H. N.

EXPERIMENTAL MECHANICS , cilt.62, sa.2, ss.199-211, 2022 (SCI-Expanded, Scopus)

5. Ideal tooth profile modifications for improving nonlinear dynamic response of planetary gear trains

Ozturk V. Y., CİĞEROĞLU E., ÖZGÜVEN H. N.

JOURNAL OF SOUND AND VIBRATION , cilt.500, 2021 (SCI-Expanded, Scopus)

6. Experimental modal analysis of nonlinear systems by using response-controlled stepped-sine testing

Karaagacli T., ÖZGÜVEN H. N.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING , cilt.146, 2021 (SCI-Expanded, Scopus)

7. A frequency domain nonparametric identification method for nonlinear structures: Describing surface method

Karaagacli T., ÖZGÜVEN H. N.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING , cilt.144, 2020 (SCI-Expanded, Scopus)

8. A novel modal superposition method with response dependent nonlinear modes for periodic vibration analysis of large MDOF nonlinear systems

Ferhatoglu E., CİĞEROĞLU E., ÖZGÜVEN H. N.

Mechanical Systems and Signal Processing , cilt.135, 2020 (SCI-Expanded, Scopus)

9. A new modal superposition method for nonlinear vibration analysis of structures using hybrid mode shapes

Ferhatoglu E., Ciğeroğlu E., Özgüven H. N.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING , cilt.107, ss.317-342, 2018 (SCI-Expanded, Scopus)

10. FRF decoupling of nonlinear systems

Kalayclogiu T., ÖZGÜVEN H. N.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING , cilt.102, ss.230-244, 2018 (SCI-Expanded, Scopus)

11. Localization and identification of structural nonlinearities using cascaded optimization and neural networks

Koyuncu A., Ciğeroğlu E., Özgüven H. N.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING , cilt.95, ss.219-238, 2017 (SCI-Expanded, Scopus)

12. Model updating of nonlinear structures from measured FRFs

Canbaloglu G., ÖZGÜVEN H. N.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING , cilt.80, ss.282-301, 2016 (SCI-Expanded, Scopus)

13. Identification of bearing dynamics under operational conditions for chatter stability prediction in high speed machining operations

ÖZŞAHİN O., Budak E., ÖZGÜVEN H. N.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY , cilt.42, ss.53-65, 2015 (SCI-Expanded, Scopus)

14. Dynamic characterization of bolted joints using FRF decoupling and optimization

Tol S., ÖZGÜVEN H. N.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING , ss.124-138, 2015 (SCI-Expanded, Scopus)

15. In-process tool point FRF identification under operational conditions using inverse stability solution

ÖZŞAHİN O., Budak E., ÖZGÜVEN H. N.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE , cilt.89, ss.64-73, 2015 (SCI-Expanded, Scopus)

16. Analytical modeling of asymmetric multi-segment rotor - bearing systems with Timoshenko beam model including gyroscopic moments

Ozsahin O., ÖZGÜVEN H. N., Budak E.

COMPUTERS & STRUCTURES , cilt.144, ss.119-126, 2014 (SCI-Expanded, Scopus)

17. Nonlinear structural modification and nonlinear coupling

Kalaycioglu T., ÖZGÜVEN H. N.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING , cilt.46, sa.2, ss.289-306, 2014 (SCI-Expanded, Scopus)

18. Parametric identification of nonlinearity in structural systems using describing function inversion

Aykan M., ÖZGÜVEN H. N.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING , cilt.40, sa.1, ss.356-376, 2013 (SCI-Expanded, Scopus)

19. Mistuning Identification of Integrally Bladed Disks With Cascaded Optimization and Neural Networks

Yumer M. E., Ciğeroğlu E., Özgüven H. N.

JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME , cilt.135, 2013 (SCI-Expanded, Scopus)

20. A New Design Approach for Rapid Evaluation of Structural Modifications Using Neural Networks

Demirkan O., Olceroglu E., BAŞDOĞAN F. İ., ÖZGÜVEN H. N.

JOURNAL OF MECHANICAL DESIGN , cilt.135, sa.2, 2013 (SCI-Expanded, Scopus)

21. A new method to determine dynamically equivalent finite element models of aircraft structures from modal test data

Karaağaçlı T., Yildiz E. N., ÖZGÜVEN H. N.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING , cilt.31, ss.94-108, 2012 (SCI-Expanded, Scopus)

22. Prediction of workpiece dynamics and its effects on chatter stability in milling

Budak E., Tunc L. T., Alan S., ÖZGÜVEN H. N.

CIRP ANNALS-MANUFACTURING TECHNOLOGY , cilt.61, sa.1, ss.339-342, 2012 (SCI-Expanded, Scopus)

23. Parametric identification of structural nonlinearities from measured frequency response data

Arslan O., Aykan M., ÖZGÜVEN H. N.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING , cilt.25, sa.4, ss.1112-1125, 2011 (SCI-Expanded, Scopus)

24. Analysis and compensation of mass loading effect of accelerometers on tool point FRF measurements for chatter stability predictions

ÖZŞAHİN O., ÖZGÜVEN H. N., Budak E.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE , cilt.50, sa.6, ss.585-589, 2010 (SCI-Expanded, Scopus)

25. Vibration measurements predict the mechanical properties of human tibia

Bediz B., ÖZGÜVEN H. N., Korkusuz F.

CLINICAL BIOMECHANICS , cilt.25, sa.4, ss.365-371, 2010 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

26. Analytical Prediction of Part Dynamics for Machining Stability Analysis

Alan S., Budak E., ÖZGÜVEN H. N.

International Journal of Automation Technology , cilt.4, sa.3, ss.259-267, 2010 (Scopus)

27. A method in model updating using Miscorrelation Index sensitivity

Kozak M. T., Öztürk M., ÖZGÜVEN H. N.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING , cilt.23, sa.6, ss.1747-1758, 2009 (SCI-Expanded, Scopus)

28. Identification of structural non-linearities using describing functions and the Sherman-Morrison method

Ozer M. B., ÖZGÜVEN H. N., Royston T. J.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING , cilt.23, sa.1, ss.30-44, 2009 (SCI-Expanded, Scopus)

29. A closed-form approach for identification of dynamical contact parameters in spindle-holder-tool assemblies

ÖZŞAHİN O., ERTURK A., ÖZGÜVEN H. N., Budak E.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE , cilt.49, sa.1, ss.25-35, 2009 (SCI-Expanded, Scopus)

30. Selection of design and operational parameters in spindle-holder-tool assemblies for maximum chatter stability by using a new analytical model

Erturk A., Budak E., Ozguven H. N.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE , cilt.47, sa.9, ss.1401-1409, 2007 (SCI-Expanded, Scopus)

31. Effect analysis of bearing and interface dynamics on tool point FRF for chatter stability in machine tools by using a new analytical model for spindle-tool assemblies

Ertuerk A., Oezgueven H. N., Budak E.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE , cilt.47, sa.1, ss.23-32, 2007 (SCI-Expanded, Scopus)

32. Analytical modeling of spindle-tool dynamics on machine tools using Timoshenko beam model and receptance coupling for the prediction of tool point FRF

Erturk A., Ozguven H. N., Budak E.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE , cilt.46, sa.15, ss.1901-1912, 2006 (SCI-Expanded, Scopus)

33. Nonlinear vibration analysis of bladed disks with dry friction dampers

Cigeroglu E., Ozguven H. N.

JOURNAL OF SOUND AND VIBRATION , cilt.295, ss.1028-1043, 2006 (SCI-Expanded, Scopus)

34. A modeling approach for analysis and improvement of spindle-holder-tool assembly dynamics

Budak E., Erturk A., Ozguven H. N.

CIRP ANNALS-MANUFACTURING TECHNOLOGY , cilt.55, sa.1, ss.369-372, 2006 (SCI-Expanded, Scopus)

35. Nonlinear dynamic modeling of gear-shaft-disk-bearing systems using finite elements and describing functions

Maliha R., Dogruer C., Ozguven H. N.

JOURNAL OF MECHANICAL DESIGN , cilt.126, sa.3, ss.534-541, 2004 (SCI-Expanded, Scopus)

36. A modal superposition method for non-linear structures

Kuran B., Ozguven H. N.

JOURNAL OF SOUND AND VIBRATION , cilt.189, sa.3, ss.315-339, 1996 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

37. DYNAMIC ANALYSIS OF GEARED SHAFT SYSTEMS BY USING A CONTINUOUS SYSTEM MODEL

Şener Ö. S., ÖZGÜVEN H. N.

JOURNAL OF SOUND AND VIBRATION , cilt.166, sa.3, ss.539-556, 1993 (SCI-Expanded, Scopus)

38. FORCED HARMONIC RESPONSE ANALYSIS OF NONLINEAR STRUCTURES USING DESCRIBING FUNCTIONS

TANRIKULU O., KURAN B., OZGUVEN H. N., IMREGUN M.

AIAA JOURNAL , cilt.31, sa.7, ss.1313-1320, 1993 (SCI-Expanded, Scopus)

39. ITERATIVE RECEPTANCE METHOD FOR DETERMINING HARMONIC RESPONSE OF STRUCTURES WITH SYMMETRICAL NONLINEARITIES

BUDAK E., OZGUVEN H. N.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING , cilt.7, sa.1, ss.75-87, 1993 (SCI-Expanded, Scopus)

40. DYNAMIC ANALYSIS OF GEARED ROTORS BY FINITE-ELEMENTS

KAHRAMAN A., OZGUVEN H. N., HOUSER D., ZAKRAJSEK J.

JOURNAL OF MECHANICAL DESIGN , cilt.114, sa.3, ss.507-514, 1992 (SCI-Expanded, Scopus)

41. A NONLINEAR MATHEMATICAL-MODEL FOR DYNAMIC ANALYSIS OF SPUR GEARS INCLUDING SHAFT AND BEARING DYNAMICS

OZGUVEN H. N.

JOURNAL OF SOUND AND VIBRATION , cilt.145, sa.2, ss.239-260, 1991 (SCI-Expanded, Scopus)

42. STRUCTURAL MODIFICATIONS USING FREQUENCY-RESPONSE FUNCTIONS

OZGUVEN H. N.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING , cilt.4, sa.1, ss.53-63, 1990 (SCI-Expanded, Scopus)

43. DYNAMIC ANALYSIS OF HIGH-SPEED GEARS BY USING LOADED STATIC TRANSMISSION ERROR

OZGUVEN H. N., HOUSER D.

JOURNAL OF SOUND AND VIBRATION , cilt.125, sa.1, ss.71-83, 1988 (SCI-Expanded, Scopus)

44. MATHEMATICAL-MODELS USED IN GEAR DYNAMICS - A REVIEW

OZGUVEN H. N., HOUSER D.

JOURNAL OF SOUND AND VIBRATION , cilt.121, sa.3, ss.383-411, 1988 (SCI-Expanded, Scopus)

45. AN EXPERIMENTAL AND ANALYTICAL STUDY OF IMPACT FORCES DURING HUMAN JUMPING

OZGUVEN H. N., BERME N.

JOURNAL OF BIOMECHANICS , cilt.21, sa.12, ss.1061-1066, 1988 (SCI-Expanded, Scopus)

46. A NEW METHOD FOR HARMONIC RESPONSE OF NONPROPORTIONALLY DAMPED STRUCTURES USING UNDAMPED MODAL DATA

OZGUVEN H. N.

JOURNAL OF SOUND AND VIBRATION , cilt.117, sa.2, ss.313-328, 1987 (SCI-Expanded, Scopus)

47. SUPPRESSING THE 1ST AND 2ND RESONANCES OF BEAMS BY DYNAMIC VIBRATION ABSORBERS

OZGUVEN H. N., CANDIR B.

JOURNAL OF SOUND AND VIBRATION , cilt.111, sa.3, ss.377-390, 1986 (SCI-Expanded, Scopus)

48. ON THE CRITICAL SPEED OF CONTINUOUS SHAFT-DISK SYSTEMS

OZGUVEN H. N.

JOURNAL OF VIBRATION ACOUSTICS STRESS AND RELIABILITY IN DESIGN-TRANSACTIONS OF THE ASME , cilt.106, sa.1, ss.59-61, 1984 (SCI-Expanded)

49. WHIRL SPEEDS AND UNBALANCE RESPONSE OF MULTIBEARING ROTORS USING FINITE-ELEMENTS

OZGUVEN H. N., OZKAN Z.

JOURNAL OF VIBRATION ACOUSTICS STRESS AND RELIABILITY IN DESIGN-TRANSACTIONS OF THE ASME , cilt.106, sa.1, ss.72-79, 1984 (SCI-Expanded)

50. Receptances of non proportionally and continuously damped plates Reduced dampers method

ÖZGÜVEN H. N.

Journal Of Sound And Vibration , cilt.85, ss.383-395, 1982 (SCI-Expanded, Scopus)

51. Receptances of non proportionally and continuously damped plates equivalent dampers method

ÖZGÜVEN H. N., COWLEY A.

Journal Of Sound And Vibration , cilt.76, ss.23-41, 1981 (SCI-Expanded, Scopus)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 48

1. Extension and Experimental Verification of an Efficient Re-analysis Method for Modified Nonlinear Structures

Ekinci E. C., Karaağaçlı T., Çelik F. K., ÖZER M. B., ÖZGÜVEN H. N.

42nd IMAC, A Conference and Exposition on Structural Dynamics, IMAC 2024, Florida, Amerika Birleşik Devletleri, 29 Ocak - 01 Şubat 2024, ss.89-94, (Tam Metin Bildiri)

2. The TRChallenge: Experimental Quantification of Nonlinear Modal Parameters and Confrontation with the Predictions

Bhattu A., Jamia N., Hermann S., Müller F., Scheel M., ÖZGÜVEN H. N., et al.

41st IMAC, A Conference and Exposition on Structural Dynamics, 2023, Austin, Amerika Birleşik Devletleri, 13 - 16 Şubat 2023, ss.133-136, (Tam Metin Bildiri)

3. Experimental Modal Analysis of Structures with High Nonlinear Damping by Using Response-Controlled Stepped-Sine Testing

Karaağaçlı T., ÖZGÜVEN H. N.

41st IMAC, A Conference and Exposition on Structural Dynamics, 2023, Austin, Amerika Birleşik Devletleri, 13 - 16 Şubat 2023, ss.125-132, (Tam Metin Bildiri)

4. Bypassing the Repeatability Issue in Nonlinear Experimental Modal Analysis of Jointed Structures by Using the RCT-HFS Framework

Gürbüz M. F., Karaağaçlı T., ÖZER M. B., ÖZGÜVEN H. N.

41st IMAC, A Conference and Exposition on Structural Dynamics, 2023, Austin, Amerika Birleşik Devletleri, 13 - 16 Şubat 2023, ss.75-80, (Tam Metin Bildiri)

5. Nonlinear Vibration Analysis of a Two-Blade System with Shroud-to-Shroud Contact by Using Response-Dependent Nonlinear Normal Modes

Ahi T., Ciğeroğlu E., Özgüven H. N.

42nd IMAC, A Conference and Exposition on Structural Dynamics, IMAC 2024, Florida, Amerika Birleşik Devletleri, 29 Ocak - 01 Şubat 2024, ss.107-113, (Tam Metin Bildiri)

6. A Novel Approach for Local Structural Modification of Nonlinear Structures

Ceren Ekinci E., Bülent Özer M. B., ÖZGÜVEN H. N.

41st IMAC, A Conference and Exposition on Structural Dynamics, 2023, Austin, Amerika Birleşik Devletleri, 13 - 16 Şubat 2023, ss.155-160, (Tam Metin Bildiri)

7. Determination of Nonlinear Joint Forces and Nonlinear Identification of Jointed Connections Using FRFs

Soleimani H., Ciğeroğlu E., Özgüven H. N.

40th IMAC, A Conference and Exposition on Structural Dynamics, 2022, Florida, Amerika Birleşik Devletleri, 7 - 10 Şubat 2022, ss.57-61, (Tam Metin Bildiri)

8. Experimental Modal Analysis of Geometrically Nonlinear Structures by Using Response-Controlled Stepped-Sine Testing

Karaağaçlı T., ÖZGÜVEN H. N.

39th IMAC, A Conference and Exposition on Structural Dynamics, 2021, Virtual, Online, 8 - 11 Şubat 2021, ss.123-134, (Tam Metin Bildiri)

9. 3D linear identification of mechanical joint using FRF decoupling and inverse structural modification methods

Soleimani H., Ciğeroğlu E., Özgüven H. N.

33rd Conference on Mechanical Vibration and Sound, VIB 2021, Held as Part of the ASME 2021 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC-CIE 2021, Virtual, Online, 17 - 19 Ağustos 2021, cilt.10, (Tam Metin Bildiri)

10. Integration of parameter sensitivity to structural optimization of helicopter rotors for minimum vibration

BİLEN M. E., CİĞEROĞLU E., ÖZGÜVEN H. N.

VIBRATIONS INROTATING MACHINERY– VIRM 12, 14 - 15 Ekim 2020, (Tam Metin Bildiri)

11. Numerical Computation of Nonlinear Normal Modes (NNMs) by using Response Dependent Nonlinear Mode (RDNM) Concept

Karaağaçlı T., Ciğeroğlu E., Özgüven H. N.

International Modal Analysis Conference and Exposition on Structural Dynamics IMAC XXXVIII, Texas, Amerika Birleşik Devletleri, 10 - 13 Şubat 2020, ss.1-4, (Tam Metin Bildiri)