Prof.Dr. DEMİRKAN ÇÖKER

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Investigation of Reinforcement Around the Lightening Hole in Composite Plates Under Tension and Shear Loads

Orun A., SALAMCİ E., ÇÖKER D.

Mechanics of Composite Materials , cilt.60, sa.1, ss.183-198, 2024 (SCI-Expanded)

High-fidelity simulations of low-velocity impact induced matrix cracking and dynamic delamination progression in CFRP beams

Batmaz O. A., Bozkurt M. O., GÜRSES E., ÇÖKER D.

Composites Part A: Applied Science and Manufacturing , cilt.177, 2024 (SCI-Expanded)

High-speed observation of dynamic delamination failure in tapered composite laminates under tensile loading

Bozkurt M. O., ÖZEN E. B., Yavuz B. O., Parnas K. L., ÇÖKER D.

Polymer Composites , 2024 (SCI-Expanded)

In-situ observation and numerical study of dynamic delamination in tapered composite laminates

Dashatan S. H., Parnas K. L., ÇÖKER D., Bozkurt M. O., Ozen E. B.

Composite Structures , cilt.312, 2023 (SCI-Expanded)

Creating tougher interfaces via suture morphology in 3D-printed multi-material polymer composites by fused filament fabrication

Altuntas U., ÇÖKER D., Yavas D.

Additive Manufacturing , cilt.61, 2023 (SCI-Expanded)

Crack propagation in the Double Cantilever Beam using Peridynamic theory

Yolum U., Bozkurt M. O., Gok E., ÇÖKER D., Gueler M. A.

COMPOSITE STRUCTURES , cilt.301, 2022 (SCI-Expanded)

Fatigue and static damage in curved woven fabric carbon fiber reinforced polymer laminates

Tasdemir B., ÇÖKER D.

JOURNAL OF COMPOSITE MATERIALS , cilt.56, sa.11, ss.1693-1708, 2022 (SCI-Expanded)

Understanding mechanical failure of graphite rocket nozzle throats under thermal stresses

Nigar B., Dönmez S., Çöker D., Özerinç S.

Aerospace Science and Technology , cilt.119, 2021 (SCI-Expanded)

Improvement of structural characteristics of composite thin-walled beams using variable stiffness concept via curvilinear fiber placement

Farsadi T., Bozkurt M. O., ÇÖKER D., KAYRAN A.

Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering , cilt.235, sa.14, ss.2017-2032, 2021 (SCI-Expanded)

2D and 3D simulations of dynamic delamination in curved unidirectional CFRP laminates subjected to moment/axial combined loading

Ata T. T., ÇÖKER D.

Composite Structures , cilt.268, 2021 (SCI-Expanded)

Intersonic shear crack propagation using peridynamic theory

Yolum U., ÇÖKER D., Guler M. A.

INTERNATIONAL JOURNAL OF FRACTURE , cilt.228, sa.1, ss.103-126, 2021 (SCI-Expanded)

In-situ investigation of dynamic failure in [0(5)/90(3)](5) CFRP beams under quasi-static and low-velocity impact loadings

Bozkurt M. O., Çöker D.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES , cilt.217, ss.134-154, 2021 (SCI-Expanded)

Development of Bolted Flange Design Tool Based on Artificial Neural Network

Yildirim A., Akay A. A., Gülasik H., Çöker D., Gürses E., Kayran A.

Journal of Pressure Vessel Technology, Transactions of the ASME , cilt.141, 2019 (SCI-Expanded)

Comparison of damage mechanisms in curved composite laminates under static and fatigue loading

Tasdemir B., Çöker D.

COMPOSITE STRUCTURES , cilt.213, ss.190-203, 2019 (SCI-Expanded) Sürdürülebilir Kalkınma

Experimental and computational study of the damage process in CFRP composite beams under low-velocity impact

Topac O. T., Gözlüklü B., Gürses E., Çöker D.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING , cilt.92, ss.167-182, 2017 (SCI-Expanded)

Modeling of dynamic crack propagation using rate dependent interface model

Gozluklu B., ÇÖKER D.

THEORETICAL AND APPLIED FRACTURE MECHANICS , cilt.85, ss.191-206, 2016 (SCI-Expanded)

Intersonic delamination in curved thick composite laminates under quasi-static loading

Gozluklu B., Uyar I., ÇÖKER D.

MECHANICS OF MATERIALS , cilt.80, ss.163-182, 2015 (SCI-Expanded)

Elastic analysis of a circumferential crack in an isotropic curved beam using the modified mapping-collocation method

Amireghbali A., ÇÖKER D.

JOURNAL OF COMPUTATIONAL AND APPLIED MATHEMATICS , cilt.264, ss.131-138, 2014 (SCI-Expanded)

Modeling of the dynamic delamination of L-shaped unidirectional laminated composites

Gozluklu B., ÇÖKER D.

COMPOSITE STRUCTURES , cilt.94, sa.4, ss.1430-1442, 2012 (SCI-Expanded)

An in vitro mechanical comparison of tibial plateau levelling osteotomy plates

Bordelon J., Coker D., Payton M., Rochat M.

VETERINARY AND COMPARATIVE ORTHOPAEDICS AND TRAUMATOLOGY , cilt.22, sa.6, ss.467-472, 2009 (SCI-Expanded)

Biomechanical analysis of suture anchors and suture materials in the canine femur

Giles J. T., Coker D., Rochat M. C., Payton M. E., Subramarian V., Bartels K. E.

VETERINARY SURGERY , cilt.37, sa.1, ss.12-21, 2008 (SCI-Expanded)

Simulation of dynamic crack growth using the generalized interpolation material point (GIMP) method

Daphalapurkar N. P., Lu H., Coker D., Komanduri R.

INTERNATIONAL JOURNAL OF FRACTURE , cilt.143, sa.1, ss.79-102, 2007 (SCI-Expanded)

Frictional sliding modes along an interface between identical elastic plates subject to shear impact loading

Coker D., Lykotrafitis G., Needleman A., Rosakis A.

Journal of the Mechanics and Physics of Solids , cilt.53, sa.4, ss.884-922, 2005 (SCI-Expanded)

Fast crack growth along interfaces

Needleman A., Coker D., Rosakis A.

Latin American Journal of Solids and Structures , cilt.2, sa.1, ss.5-15, 2005 (SCI-Expanded)

Dynamic crack growth along a polymer composite-Homalite interface

Coker D., Rosakis A., Needleman A.

Journal of the Mechanics and Physics of Solids , cilt.51, sa.3, ss.425-460, 2003 (SCI-Expanded)

Three-dimensional modeling of intersonic shear-crack growth in asymmetrically loaded unidirectional composite plates

Yu C., Pandolfi A., Ortiz M., Coker D., Rosakis A.

International Journal of Solids and Structures , cilt.39, sa.25, ss.6135-6157, 2002 (SCI-Expanded)

Intersonic shear crack growth along weak planes

Rosakis A. J., Samudrala O., Coker D.

Materials Research Innovations , cilt.3, sa.4, ss.236-243, 2000 (SCI-Expanded)

Cracks faster than the shear wave speed

Rosakis A., Samudrala O., Coker D.

Science , cilt.284, sa.5418, ss.1337-1340, 1999 (SCI-Expanded)

Cyclic behavior of unidirectional and cross-ply titanium matrix composites

Neu R., Coker D., Nicholas T.

International Journal of Plasticity , cilt.12, sa.3, ss.361-385, 1996 (SCI-Expanded)

An experimental study of residual fiber strains in Ti-15-3 continuous fiber composites

Pickard S., Miracle D., Majumdar B., Kendig K., Rothenflue L., Coker D.

Acta Metallurgica Et Materialia , cilt.43, sa.8, ss.3105-3112, 1995 (SCI-Expanded)

Stress intensity factor and compliance solutions for a single edge notched specimen with clamped ends

Blatt D., John R., Coker D.

Engineering Fracture Mechanics , cilt.47, sa.4, ss.521-532, 1994 (SCI-Expanded)

Weight function for a single edge cracked geometry with clamped ends

John R., Kaldon S. G., Johnson D. A., Coker D.

International Journal of Fracture , cilt.72, sa.2, ss.145-158, 1985 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Finite element simulations for investigating the strength characteristics of a 5m composite wind turbine blade

Can Muyan C. M., ÇÖKER D.

WIND ENERGY SCIENCE , cilt.5, sa.4, ss.1339-1358, 2020 (ESCI)

Simulation of Drop-Weight Impact Test on Composite Laminates using Finite Element Method

bozkurt m. o., PARNAS K. L., ÇÖKER D.

Procedia Structural Integrity , cilt.21, ss.206-214, 2019 (Hakemli Dergi)

3D Simulation of Dynamic Delamination in Curved Composite Laminates

Ata T. T., ÇÖKER D.

Procedia Structural Integrity , cilt.21, ss.130-137, 2019 (Hakemli Dergi)

Interlaminar tensile strength of different angle-ply CFRP composites

Burak Ogun Y., PARNAS K. L., ÇÖKER D.

Procedia Structural Integrity , cilt.21, ss.198-205, 2019 (Hakemli Dergi)

Investigation of fretting fatigue failure mechanism of lug-bush connection members

Ozen E. B., korkmaz y., ÇÖKER D.

Procedia Structural Integrity , cilt.21, ss.215-223, 2019 (Hakemli Dergi)

Experimental observations of intersonic crack growth in asymmetrically loaded unidirectional composite plates

Coker D., Rosakis A. J.

Philosophical Magazine A: Physics of Condensed Matter, Structure, Defects and Mechanical Properties , cilt.81, sa.3, ss.571-595, 2001 (Scopus)

Subsonic and intersonic dynamic crack growth in unidirectional composites

Coker D., Rosakis A. J., Huang Y. Y.

American Society of Mechanical Engineers, Applied Mechanics Division, AMD , cilt.235, ss.75-86, 1999 (Scopus)

A comparison of analysis tools for predicting the inelastic cyclic response of cross-ply titanium matrix composites

Kroupa J. L., Neu R. W., Nicholas T., Coker D., Roberison D. D., Mall S.

ASTM Special Technical Publication , cilt.1253, ss.297-327, 1996 (Scopus)

Analysis of the thermoviscoplastic behavior of [0/90] SCS-6/timetal®21S composites

Coker D., Neu R. W., Nicholas T.

ASTM Special Technical Publication , cilt.1263, ss.213-235, 1996 (Scopus)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Bioinspired Interfaces for Improved Interlaminar Shear Strength in 3D Printed Multi-material Polymer Composites

ALTUNTAŞ U., ÇÖKER D., Yavas D.

SEM Annual Conference and Exposition on Experimental and Applied Mechanics, 2023, Florida, Amerika Birleşik Devletleri, 5 - 08 Haziran 2023, ss.63-68

Strength analysis of a 5-m composite wind turbine blade under static and fatigue loading conditions

Muyan C., ÇÖKER D.

41st Riso International Symposium on Materials Science: Materials and Design for Next Generation Wind Turbine Blades, Roskilde, Danimarka, 7 - 10 Eylül 2020, cilt.942

Experimental Investigation of Damage Progression in Curved Laminates under Static and Fatigue Loading

Çevik A., Çöker D.

ICCS23 - 23rd International Conference on Composite Structures, Porto, Portekiz, 01 Eylül 2020

3D Simulation of Dynamic Interlaminar Failure in Curved Unidirectional CFRP

Ata T. T., Çöker D.

ICCS23 - 23rd International Conference on Composite Structures, Porto, Portekiz, 01 Eylül 2020

Interlaminar tensile strength of different angle-ply CFRP composites

Yavuz B. O., Parnas L., ÇÖKER D.

1st International Workshop on Plasticity, Damage and Fracture of Engineering Materials (IWPDF), Ankara, Türkiye, 22 - 23 Ağustos 2019, cilt.21, ss.198-205

Simulation of Drop-Weight Impact Test on Composite Laminates using Finite Element Method

Bozkurt M. O., Parnas L., ÇÖKER D.

1st International Workshop on Plasticity, Damage and Fracture of Engineering Materials (IWPDF), Ankara, Türkiye, 22 - 23 Ağustos 2019, cilt.21, ss.206-214

Static and Fatigue Failure Mechanisms in Curved Composite Laminates

ÇÖKER D.

Workshop on ”Plasticity, Damage and Fracture of Engineering Materials”, Ankara, Türkiye, 25 Kasım 2018

Fretting fatigue failure of lug-bush connection members under tensile loading

ÖZEN E. B., ÇÖKER D., Korkmaz Y. M.

7th Asian/Australian Rotorcraft Forum, ARF 2018, Seogwipo City, Jeju Island, Güney Kore, 30 Ekim - 01 Kasım 2018

Finite Element Modelling of TBC Failure Mechanisms by Using XFEM and CZM

Bostanci S. M., GÜRSES E., ÇÖKER D.

1st International Workshop on Plasticity, Damage and Fracture of Engineering Materials (IWPDF), Ankara, Türkiye, 22 - 23 Ağustos 2019, cilt.21, ss.91-100

3D Simulation of Dynamic Delamination in Curved Composite Laminates

Ata T. T., ÇÖKER D.

1st International Workshop on Plasticity, Damage and Fracture of Engineering Materials (IWPDF), Ankara, Türkiye, 22 - 23 Ağustos 2019, cilt.21, ss.130-137

Investigation of fretting fatigue failure mechanism of lug-bush connection members

ÖZEN E. B., Korkmaz Y. M., ÇÖKER D.

1st International Workshop on Plasticity, Damage and Fracture of Engineering Materials (IWPDF), Ankara, Türkiye, 22 - 23 Ağustos 2019, cilt.21, ss.215-223

Simulation of Impact Induced Damage Process in a Carbon/Epoxy Composite Beam

bozkurt m. o., ÇÖKER D., PARNAS K. L.

7th Asian/Australian Rotorcraft Forum, Juji island, Güney Kore, 30 Ekim - 01 Kasım 2018

Experimental and Numerical Analysis of the Effect of the Dissimilar Mating Materials under Fretting Fatigue Conditions

korkmaz y., ÇÖKER D.

7th Asian/Australian Rotorcraft Forum, jeju island, Güney Kore, 30 Ekim - 01 Kasım 2018

Delamination Analysis of Tapered Composite Laminates using Cohesive Elements

dashatan s., PARNAS K. L., ÇÖKER D., Poorzeinolabedin m.

ARF 2018 7th Asian/Australian Rotorcraft Forum, Jeju Island, Güney Kore, 30 Ekim - 01 Kasım 2018

Investigation of Static and Fatigue Failure Mechanisms on UD and Woven Curved Composite Laminates

ÇÖKER D., Tasdemir B.

7th Asian/Australian Rotorcraft Forum, jeju island, Güney Kore, 30 Ekim - 01 Kasım 2018

Actuator Load Calculation Algorithm for a Multiaxial Test System of a Rotating Beam like Aerostructure

limon u., ÇÖKER D.

7th Asian/Australian Rotorcraft Forum, Jeju island, Güney Kore, 30 Ekim - 01 Kasım 2018

Effect of lay-up orientation on fracture toughness of CFRP laminates

yavuz b. o., ÇÖKER D., PARNAS K. L.

7th Asian/Australian Rotorcraft Forum, Jeju Island, Güney Kore, 30 Ekim - 01 Kasım 2018

Mechanical and microstructural evolution of solid graphite nozzle throats in extreme temperature and pressure conditions

Kaygusuz B., Nigar B., Ünlüsoy L., Çöker D., Özerinç S.

19th International Metallurgy and Materials Congress, İstanbul, Türkiye, 25 - 27 Ekim 2018, ss.1

Mechanical and Microstructural Evolution of Solid Graphite Rocket Nozzle Throats in Extreme Temperature and Pressure Conditions

Kaygusuz B., Nigar B., ÜNLÜSOY L., ÇÖKER D., ÖZERİNÇ S.

19th International Metallurgy and Materials Congress, İstanbul, Türkiye, 25 - 27 Ekim 2018

Computational Investigation of the 3-D effects on Dynamic Fracture of Curved Composite Laminates

tamer tahir a., ÇÖKER D.

ICCS21, 21st Int. Conf. Comp. Structures, Bologna, İtalya, 4 - 07 Eylül 2018

Peridynamic Modelling of Delamination in DCB Specimen

Yolum U., Gok E., ÇÖKER D., GÜLER M. A.

22nd European Conference on Fracture (ECF) - Loading and Environmental Effects on Structural Integrity, Belgrade, Sırbistan Ve Karadağ, 26 - 31 Ağustos 2018, cilt.13, ss.2126-2131

Damage Progression in Thick Curved Composite Laminates under Static and Fatigue Loading

Tasdemir B., ÇÖKER D.

7th Conference on Science of Making Torque from Wind (TORQUE), Milan, İtalya, 20 - 22 Haziran 2018, cilt.1037 Sürdürülebilir Kalkınma

Strength Analysis of a Composite Turbine Blade Using Puck Failure Criteria

Ozyildiz M., Muyan C., ÇÖKER D.

7th Conference on Science of Making Torque from Wind (TORQUE), Milan, İtalya, 20 - 22 Haziran 2018, cilt.1037

Numerical Simulation of Dynamic Crack Growth Using Peridynamic Theory

yolum u., GÜLER M. A., ÇÖKER D.

ECCM-ECFD 2018, Glasgow, Birleşik Krallık, 11 - 15 Haziran 2018

Finite element modelling of TBC failure mechanisms by using XFEM

Bostancı S. M., Gürses E., Çöker D.

ASME 2018 International Mechanical Engineering Congress and Exposition, IMECE 2018, Pennsylvania, Amerika Birleşik Devletleri, 9 - 15 Kasım 2018, cilt.1

EXPERIMENTAL STUDY AND FINITE ELEMENT ANALYSIS OF DOVETAIL ATTACHMENTS

Akay A. A., Çöker D., Kayran A., Gürses E.

ASME 2017 International Mechanical Engineering Congress & Exposition, Florida, Amerika Birleşik Devletleri, 3 - 09 Kasım 2017, ss.1-8

DEVELOPMENT OF ARTIFICIAL NEURAL NETWORK BASED DESIGN TOOL FOR AIRCRAFT ENGINE BOLTED FLANGE CONNECTION SUBJECT TO COMBINED AXIAL AND MOMENT LOAD

Sanli T. V., Gürses E., Çöker D., Kayran A.

ASME International Mechanical Engineering Congress and Exposition, Tama, Japonya, 3 - 09 Kasım 2017

EXPERIMENTAL STUDY AND FINITE ELEMENT ANALYSIS OF DOVETAIL ATTACHMENTS

Akay A. A., Çöker D., Kayran A., Gürses E.

ASME International Mechanical Engineering Congress and Exposition, Tama, Japonya, 3 - 09 Kasım 2017

Implementation of the Submodelling Technique on the Dovetail Attachments”

Akay A. A., Çöker D., Kayran A., Gürses E.

9th Ankara International Aerospace Conference, Ankara, Türkiye, 20 - 22 Eylül 2017

Investigation of Mean Stress Effect for Equivalent Stress Methods and Critical Plane Approaches for High Cycle Fatigue Life Estimations

Engin Z., ÇÖKER D.

9th ANKARA INTERNATIONAL AEROSPACE CONFERENCE, Ankara, Türkiye, 20 - 22 Eylül 2017

EFFECT OF OUT-OF-AUTOCLAVE CURING ON THE BENDING STRENGTH OF TPNCF AND UNIDIRECTIONAL LAMINATES

bozkurt m. o., bilge k., PAPİLA M., ÇÖKER D.

9th ANKARA INTERNATIONAL AEROSPACE CONFERENCE, 20 - 22 Eylül 2017

Finite element analysis of fretting contact for nonhomogenous materials

Korkmaz Y. M., ÇÖKER D.

9th International Conference on Tribology (Balkantrib), Türkiye, 13 - 15 Eylül 2017, cilt.295

Sliding contact on the interface of elastic body and rigid surface using a single block Burridge-Knopoff model

Amireghbali A., ÇÖKER D.

9th International Conference on Tribology (Balkantrib), Türkiye, 13 - 15 Eylül 2017, cilt.295

Dynamic Frictional Sliding Modes between Two Homogenous Interfaces

Taj W., ÇÖKER D.

9th International Conference on Tribology (Balkantrib), Türkiye, 13 - 15 Eylül 2017, cilt.295

Parametric study of interface dynamics for sliding contact of elastic body on a rigid surface using Burridge-Knoppoff model

Amireghbali A., ÇÖKER D.

13th National Congress on Theoretical and Applied Mechanics, Sofija, Bulgaristan, 6 - 10 Eylül 2017

Finite element analysis of fretting contact for dissimilar and nonhomogeneous materials

Korkmaz Y. M., ÇÖKER D.

2nd International Conference on Structural Integrity (ICSI), Funchal, Portekiz, 4 - 07 Eylül 2017, cilt.5, ss.452-459

Comparison of Equivalent Stress Methods with Critical Plane Approaches for Multiaxial High Cycle Fatigue Assessment

Engin Z., ÇÖKER D.

2nd International Conference on Structural Integrity (ICSI), Funchal, Portekiz, 4 - 07 Eylül 2017, cilt.5, ss.1229-1236

Static and fatigue failure of unidirectional curved composite laminates

ÇÖKER D., ustun e., am m.

ICCS20 20th International Conference on Composite Structures, Paris, Fransa, 4 - 07 Eylül 2017

Experimental Investigation of In-situ Out-of-plane Impact Failure Progression in CFRP Composite Beams

bozkurt m. o., ÇÖKER D.

ICCS20 20th International Conference on Composite Structures, Paris, Fransa, 4 - 07 Eylül 2017

Damage Progression and Delamination Speeds in CFRP Under Impact Loading

BOZKURT M. O., TOPAÇ Ö. T., GÜRSES E., ÇÖKER D.

20th International Conference on Composite Struc- tures ICCS 20, Paris, Fransa, 4 - 07 Eylül 2017

Damage Progression in Curved Composite Laminates under Combined Moment/Axial Fatigue Loading

ÇÖKER D., Tasdemir B.

ICCS20 20th International Conference on Composite Structures, Paris, Fransa, 4 - 07 Eylül 2017

Fatigue and Static Failure of Curved Composite Laminates under Combined Moment/Axial Loading

tasdemir b., ÇÖKER D.

Wind Energy Science Conference 2017, kopenhag, Danimarka, 26 - 29 Haziran 2017

STATIC ANALYSIS OF A COMPOSITE WIND TURBINE BLADE USING FINITE ELEMENT MODEL

Ozyildiz M., ÇÖKER D.

7th International Conference on Computational Methods in Marine Engineering (MARINE), Nantes, Fransa, 15 - 17 Mayıs 2017, ss.1110-1120

DÖNER KİRİŞ BENZERİ HAVACILIK YAPILARININ YAPISAL TESTİ İÇİN EYLEYİCİ YÜKÜ HESAPLAMA ALGORİTMASI VE ÇOK EKSENLİ TEST İLE DOĞRULANMASI

Limon A. U., Ulu Y., ÇÖKER D.

VI. Ulusal havacilik ve Uzay Kongresi, Türkiye, 28 - 30 Eylül 2016

Eksenel Kesme ve Moment Yükü Altındaki Flanşlar İçin Yapay Sinir Ağına Dayalı Cıvatalı Flanş Tasarım Aracı Geliştirilmesi

Şanlı V., Akay A. A., Yıldırım A., Gürses E., Çöker D., Kayran A.

VI. Ulusal Havacılık ve Uzay Konferansı (UHUK), Kocaeli, Türkiye, 28 - 30 Eylül 2016

Intersonic failure in curved composite laminates

ÇÖKER D.

Mechanics of Materials Across Nano to Geological Time and Length Scales Symposium, Providence, Amerika Birleşik Devletleri, 16 - 17 Eylül 2016

EXPERIMENTAL AND NUMERICAL INVESTIGATION OF IMPACT INDUCED DAMAGE PROGRESSION IN FIBER REINFORCED COMPOSITES

GÜRSES E., Topac T., ÇÖKER D.

ICTAM 2016, Montreal, Kanada, 21 - 26 Ağustos 2016

CURVED BEAM STRENGTH OF THIN PLY CFRP NON CRIMP FABRIC LAMINATES

Arca M., PAPİLA M., ÇÖKER D.

17th international conference on Experimental Mechanics, Rhodes, Yunanistan, 3 - 06 Temmuz 2016

EXPERIMENTAL AND COMPUTATIONAL STUDY OF DAMAGE PROCESS IN CFRP COMPOSITE BEAMS UNDER LOW VELOCITY IMPACT

TOPAÇ Ö. T., GÜRSES E., ÇÖKER D.

17th International Conference on Experimental Mechanics, Rodos, Yunanistan, 3 - 07 Temmuz 2016

Effect of laminate thickness and initial delamination size on failure of L shaped composite joints

Tasdemir B., Yavas D., ÇÖKER D.

17th Int. Conf. on Experimental Mechanics, Rhodes, Yunanistan, 3 - 07 Temmuz 2016

Role of Laminate Thickness on Sequential Dynamic Delamination of Curved [90/0] CFRP Composite Laminates

Uyar I., Tasdemir B., Yavas D., ÇÖKER D.

SEM Annual Conference and Exposition on Experimental and Applied Mechanics, Florida, Amerika Birleşik Devletleri, 6 - 09 Haziran 2016, ss.43-48

Experimental Investigation of Strength of Curved Beam by Thin Ply Non-Crimp Fabric Laminates

Arca M. A., PAPİLA M., ÇÖKER D.

SEM Annual Conference and Exposition on Experimental and Applied Mechanics, Florida, Amerika Birleşik Devletleri, 6 - 09 Haziran 2016, ss.37-42 Sürdürülebilir Kalkınma

Exp Investigation of Curved-beam strength and toughness of thin ply CFRP non crimp fabric laminates

Arca M., Bilge K., PAPİLA M., ÇÖKER D.

XIII SEM Internaltional Congress, 2016 Annual Conference on Experimental and Applied Mechanics, Orlando, Orlando, FL, Amerika Birleşik Devletleri, 6 - 09 Haziran 2016

Effect of Defect Size on the Failure of L Shaped Composite Joints

Uyar I., Tasdemir B., Denizhan Y., ÇÖKER D.

XIII SEM International Congress, 2016 Annual Conference on Experimental and Applied Mechanics, Orlando, Amerika Birleşik Devletleri, 6 - 09 Haziran 2016

IMECE2015 51021 DEVELOPMENT OF BOLTED FLANGE DESIGN TOOL BASED ON FINITE ELEMENT ANALYSIS AND ARTIFICIAL NEURAL NETWORK

yıldırım a., hasan g., AKAY A. A., GÜRSES E., ÇÖKER D., KAYRAN A.

IMECE2015 - ASME 2015 International Mechanical Engineering Congress & Exposition, Houston, 13 - 19 Kasım 2015

DEVELOPMENT OF BOLTED FLANGE DESIGN TOOL BASED ON FINITE ELEMENT ANALYSIS AND ARTIFICIAL NEURAL NETWORK

Yildirim A., Kayran A., Gulasik H., Çöker D., Gürses E., Kayran A.

ASME International Mechanical Engineering Congress and Exposition (IMECE2015), Texas, Amerika Birleşik Devletleri, 13 - 19 Kasım 2015

Experimental and numerical investigation of damage interaction mechanism in composites under dynamic transverse loading

Topac O., Burak G., GÜRSES E., ÇÖKER D.

SES 52nd Annual Technical Meeting, College Park, Amerika Birleşik Devletleri, 26 - 28 Ekim 2015

Failure Initiation and Progression in 0 90 CFRP Composite Beams Subject to Out of Plane Low velocity Impact

ÇÖKER D., Topaç Ö. T., GÜRSES E.

Society of Engineering Science 52nd Annual Technical Meeting, College Park, Amerika Birleşik Devletleri, 26 - 28 Ekim 2015

Experimental investigation of dynamic delamination in curved woven and unidirectional composite laminates

Tasdemir B., Uyar I., ÇÖKER D.

The 2nd International Conference on Future Technologies in Wind Energy, London, Kanada, 19 - 21 Ekim 2015

Curved beam strength and toughness of thin ply CFRP non crimp fabric laminates

Arca M., PAPİLA M., ÇÖKER D.

The 2nd Int. Conf. on Future Technologies in Wind Energy (WINDTECH2015), London, Kanada, 19 - 21 Ekim 2015