Prof. Dr. CEMİL HAKAN GÜR

Yayın Ağı

Makaleler 82

1. A sustainable strategy for wire arc additive manufacturing of high-performance duplex stainless Steel: Microstructural refinement and mechanical anisotropy reduction

Akbarzadeh Chiniforoush E., Zargari H. H., Jandaghi M. R., Moverare J., Warsi R., GÜR C. H.

Materials Science and Engineering: A , cilt.943, 2025 (SCI-Expanded, Scopus)

2. Investigation of travel speed effects on microstructure and corrosion behavior of duplex stainless steel in wire-based DED additive manufacturing

Chiniforoush E. A., Gholizadeh T., Jandaghi M. R., Moverare J., GÜR C. H.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T , cilt.37, ss.1486-1504, 2025 (SCI-Expanded, Scopus)

3. Impact of active to inert shielding gas transition on the corrosion behavior of wire arc additively manufactured duplex stainless steel

Chiniforoush E. A., Gholizadeh T., Jandaghi M. R., Moverare J., GÜR C. H.

Materials and Design , cilt.253, 2025 (SCI-Expanded, Scopus)

4. Non-Destructive Determination of Surface Residual Stresses in Electron Beam Welded AISI 410 Martensitic Stainless Steel Using the Magnetic Barkhausen Noise Technique

YELBAY H. İ., GÜR C. H.

Metals , cilt.15, sa.3, 2025 (SCI-Expanded, Scopus)

5. Investigating the Effects of CoMoCrSi Powder Composition and Particle Size, and Annealing Heat Treatment on Microstructure and Mechanical and Tribological Performance of HVOF Sprayed Coatings

Ertürk M. T., Tirkeş S., Gür C. H.

METALS AND MATERIALS INTERNATIONAL , cilt.30, sa.12, ss.3268-3293, 2024 (SCI-Expanded, Scopus)

6. Influence of Shielding Gas on the Microstructure and Mechanical Properties of Duplex Stainless Steel in Wire Arc Additive Manufacturing

Akbarzadeh E., YURTIŞIK K., Hakan Gür C. H., Saeid T., Tavangar R.

METALS AND MATERIALS INTERNATIONAL , cilt.30, sa.7, ss.1977-1996, 2024 (SCI-Expanded, Scopus)

7. The effects of SLM process parameters on the relative density and hardness of austenitic stainless steel 316L

Bakhtiarian M., Omidvar H., Mashhuriazar A., Sajuri Z., GÜR C. H.

Journal of Materials Research and Technology , cilt.29, ss.1616-1629, 2024 (SCI-Expanded, Scopus)

8. Determination of the anisotropy in mechanical properties of laser powder bed fusion Inconel 718 by ultrasonic testing

Alay T., Cagirici M., Yagmur A., Gür C. H.

NONDESTRUCTIVE TESTING AND EVALUATION , cilt.40, sa.1, ss.206-224, 2024 (SCI-Expanded, Scopus)

9. Tailoring the microstructure and mechanical properties of IN718 alloy via a novel scanning strategy implemented in laser powder bed fusion

KALELİ ALAY T., Cagirici M., Yalcin M. Y., Yagmur A., TİRKEŞ S., AYDOĞAN GÜNGÖR E., et al.

Materials Science and Engineering: A , cilt.884, 2023 (SCI-Expanded, Scopus)

10. Investigating the Effects of Repair Welding on Microstructure, Mechanical Properties, and Corrosion Behavior of IN-939 Superalloy

Mashhuriazar A., Badihehaghdam M., GÜR C. H., ERTÜRK M. T., BATIGÜN C., TİRKEŞ S., et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.32, sa.15, ss.7016-7028, 2023 (SCI-Expanded, Scopus)

11. Effects of heat input on metallurgical behavior in HAZ of multi-pass and multi-layer welded IN-939 superalloy

Mashhuriazar A., GÜR C. H., Sajuri Z., Omidvar H.

Journal of Materials Research and Technology , cilt.15, ss.1590-1603, 2021 (SCI-Expanded, Scopus)

12. An Empirical Approach to Analyze Creep Rupture Behavior of P91 Steel

Aslam M. J., GÜR C. H.

Korean Journal of Materials Research , cilt.31, sa.5, ss.255-263, 2021 (ESCI, Scopus)

13. Effect of Welding Parameters on the Liquation Cracking Behavior of High-Chromium Ni-Based Superalloy

Mashhuriazar A., Omidvar H., GÜR C. H., Sajuri Z.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.29, sa.12, ss.7843-7852, 2020 (SCI-Expanded, Scopus)

14. Effects of Pre-Weld Heat Treatment and Heat Input on Metallurgical and Mechanical Behaviour in HAZ of Multi-Pass Welded IN-939 Superalloy

Mashhuriazar A., Omidvar H., Sajuri Z., GÜR C. H., Baghdadi A. H.

METALS , cilt.10, sa.11, 2020 (SCI-Expanded, Scopus)

15. Determination of surface residual stresses in carburised AISI 8620 steel by the magnetic Barkhausen noise method

Kaleli T., GÜR C. H.

INSIGHT , cilt.62, sa.7, ss.416-421, 2020 (SCI-Expanded, Scopus)

16. Effect of microstructural modification on damage tolerance of 34CrMo4 shaft steel

Ozcan B., Gurer G., GÜR C. H.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES , cilt.43, sa.6, ss.1214-1225, 2020 (SCI-Expanded, Scopus)

17. Investigating the correlation between magnetic Barkhausen noise emission and the fatigue life of shot-peened AISI 4140 steel

Çalışkan S., GÜR C. H.

Insight: Non-Destructive Testing and Condition Monitoring , cilt.61, sa.12, ss.701-705, 2019 (SCI-Expanded, Scopus)

18. Failure analysis of fretting fatigue initiation and growth on railway axle press-fits

GURER G., GÜR C. H.

ENGINEERING FAILURE ANALYSIS , cilt.84, ss.151-166, 2018 (SCI-Expanded, Scopus)

19. Review of Residual Stress Measurement by Magnetic Barkhausen Noise Technique

GÜR C. H.

MATERIALS PERFORMANCE AND CHARACTERIZATION , cilt.7, sa.4, ss.504-525, 2018 (ESCI, Scopus)

20. Applicability of the Magnetic Barkhausen Noise Method for Nondestructive Measurement of Residual Stresses in the Carburized and Tempered 19CrNi5H Steels

HIZLI H., GÜR C. H.

RESEARCH IN NONDESTRUCTIVE EVALUATION , cilt.29, sa.4, ss.221-236, 2018 (SCI-Expanded, Scopus)

21. Comparison of Electronic Speckle Laser Interferometry Hole-Drilling and X-ray Diffraction Techniques for Determination of Residual Stresses in the Heat Treated Steels

HIZLI H., GÜR C. H.

JOURNAL OF NONDESTRUCTIVE EVALUATION , cilt.36, sa.2, 2017 (SCI-Expanded, Scopus)

22. Long-term thermal stability of Equal Channel Angular Pressed 2024 aluminum alloy

TAN G., KALAY Y. E., GÜR C. H.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.677, ss.307-315, 2016 (SCI-Expanded, Scopus)

23. Sementasyon İşlemi Uygulanan Çeliklerdeki Kalıntı Gerilmelerin Tahribatsız Tekniklerle Ölçülmesi

HIZLI H., KALELİ T., GÜR C. H.

METALURJİ , ss.30-35, 2016 (Hakemli Dergi)

24. Investigating the Effects of Subsequent Weld Passes on Surface Residual Stresses in Steel Weldments by Magnetic Barkhausen Noise Technique

GÜR C. H., Erian G., BATIGÜN C., ÇAM İ.

MATERIALS EVALUATION , cilt.74, sa.3, ss.418-423, 2016 (SCI-Expanded)

25. Investigating the effects of subsequent weld passes on surface residual stresses in steel weld merits by Magnetic Barkhausen Noise technique

GÜR C. H., Erian G., BATIGÜN C., ÇAM İ.

Materials Evaluation , cilt.74, sa.3, ss.418-423, 2016 (SCI-Expanded, Scopus)

26. Investigating the formation of intermetallic compounds during friction stir welding of magnesium alloy to aluminum alloy in air and under liquid nitrogen

Mofid M. A., Abdollah-zadeh A., Guer C. H.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.71, ss.1493-1499, 2014 (SCI-Expanded, Scopus)

27. Numerical and experimental determination of the residual stress state in multipass welded API 5LX70 plates

Garipova N., BATIGÜN C., GÜR C. H.

Materialpruefung/Materials Testing , cilt.56, sa.10, ss.831-836, 2014 (SCI-Expanded, Scopus)

28. Numerical and Experimental Determination of the Residual Stress State in Multipass Welded API 5L X70 Plates

Garipova N., BATIGÜN C., GÜR C. H.

MATERIALS TESTING , cilt.56, sa.10, ss.831-836, 2014 (SCI-Expanded, Scopus)

29. Characterization of Duplex Stainless Steel Weld Metals Obtained by Hybrid Plasma-Gas Metal Arc Welding

YURTIŞIK K., TİRKEŞ S., Dykhno I., GÜR C. H., GÜRBÜZ R.

SOLDAGEM & INSPECAO , cilt.18, sa.3, ss.207-216, 2013 (SCI-Expanded, Scopus)

30. Description of the PM process by using Ishikawa-analysis

Simon A., Kovács K., GÜR C. H., Pieczonka T., Gácsi Z.

Materials Science Forum , cilt.752, ss.48-56, 2013 (Scopus)

31. Homogenization of ECAPed Al 2024 alloy through age-hardening

KOTAN G., TAN E., KALAY Y. E., GÜR C. H.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.559, ss.601-606, 2013 (SCI-Expanded, Scopus)

32. Submerged Friction-Stir Welding (SFSW) Underwater and Under Liquid Nitrogen: An Improved Method to Join Al Alloys to Mg Alloys

Mofid M. A., Abdollah-Zadeh A., Ghaini F. M., GÜR C. H.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE , sa.13, ss.5106-5114, 2012 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

33. Characterization of steel microstructures by magnetic barkhausen noise technique

GÜR C. H.

RILEM Bookseries , cilt.6, ss.499-504, 2012 (Scopus)

34. Simulation of Quenching: A Review

GÜR C. H., Şimşir C.

MATERIALS PERFORMANCE AND CHARACTERIZATION , cilt.1, sa.1, 2012 (ESCI, Scopus)

35. Determining the Elastic Properties of Modified Polystyrenes by Sound Velocity Measurements

Oral I., Guzel H., Ahmetli G., GÜR C. H.

JOURNAL OF APPLIED POLYMER SCIENCE , cilt.121, sa.6, ss.3425-3432, 2011 (SCI-Expanded, Scopus)

36. Metallurgical influence on quench distortion of SAE 52100 long cylinders

Maradit B., Şimşir C., Lübben T., GÜR C. H.

International Heat Treatment and Surface Engineering , cilt.5, sa.2, ss.57-60, 2011 (Scopus)

37. Mechanical and microstructural characterization of 6061 aluminum alloy strips severely deformed by Dissimilar Channel Angular Pressing

Tan E., KİBAR A. A., Gur C. H.

MATERIALS CHARACTERIZATION , cilt.62, sa.4, ss.391-397, 2011 (SCI-Expanded, Scopus)

38. A new framework for simulation of heat treatments

Şimşir C., GÜR C. H.

International Journal of Microstructure and Materials Properties , cilt.5, ss.399-411, 2010 (Scopus)

39. Monitoring the Microstructural Evolution in Spheroidized Steels by Magnetic Barkhausen Noise Measurements

DAVUT K., GÜR C. H.

JOURNAL OF NONDESTRUCTIVE EVALUATION , cilt.29, sa.4, ss.241-247, 2010 (SCI-Expanded, Scopus)

40. Monitoring variation of surface residual stresses in shot peened steel components by the magnetic Barkhausen noise method

SAVAŞ S., GÜR C. H.

INSIGHT , cilt.52, sa.12, ss.672-677, 2010 (SCI-Expanded, Scopus)

41. INFLUENCE OF DCAP PROCESS ON THE MECHANICAL PROPERTIES OF 6061 Al-ALLOY SHEET

Tan E., GÜR C. H.

REVIEWS ON ADVANCED MATERIALS SCIENCE , cilt.25, sa.2, ss.189-193, 2010 (SCI-Expanded, Scopus)

42. Quantitative analysis of the influence of strain hardening on equal channel angular pressing process

ŞİMŞİR C., Karpuz P., GÜR C. H.

COMPUTATIONAL MATERIALS SCIENCE , cilt.48, sa.3, ss.633-639, 2010 (SCI-Expanded, Scopus)

43. Characterization of ultra-fine grained steel samples produced by high pressure torsion via magnetic Barkhausen noise analysis

Bayramoglu S., GÜR C. H., Alexandrov I. V., Abramova M. M.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.527, ss.927-933, 2010 (SCI-Expanded, Scopus)

44. A Simulation of the Quenching Process for Predicting Temperature, Microstructure and Residual Stresses

Simsir C., GÜR C. H.

STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING , cilt.56, sa.2, ss.93-103, 2010 (SCI-Expanded, Scopus)

45. A review on modeling and simulation of quenching

Şimşir C., Hakan Gür C. H.

ASTM Special Technical Publication , ss.117-156, 2010 (Scopus)

46. Non-destructive determination of residual stress state in steel weldments by Magnetic Barkhausen Noise technique

YELBAY H. İ., ÇAM İ., Guer C. H.

NDT & E INTERNATIONAL , cilt.43, sa.1, ss.29-33, 2010 (SCI-Expanded, Scopus)

47. Investigating the effects of hardening of aluminium alloys on equal-channel angular pressing-A finite-element study

Karpuz P., Simsir C., GÜR C. H.

Materials Science and Engineering A , cilt.503, ss.148-151, 2009 (SCI-Expanded, Scopus)

48. A review on modeling and simulation of quenching

Şimşir C., Hakan Gür C. H.

Journal of ASTM International , cilt.6, sa.2, 2009 (SCI-Expanded)

49. Simulation of equal channel angular pressing applied to produce structures with ultrafine-sized grains

Karpuz P., ŞİMŞİR C., Hakan Gür C. H.

International Journal of Microstructure and Materials Properties , cilt.4, sa.3, ss.356-367, 2009 (Scopus)

50. Utilization of Non-destructive Methods for Determining the Effect of Age-Hardening on Impact Toughness of 2024 Al-Cu-Mg Alloy

GÜR C. H., Yildiz I.

JOURNAL OF NONDESTRUCTIVE EVALUATION , cilt.27, sa.4, ss.99-104, 2008 (SCI-Expanded, Scopus)

51. A FEM based framework for simulation of thermal treatments: Application to steel quenching

Şimşir C., GÜR C. H.

COMPUTATIONAL MATERIALS SCIENCE , cilt.44, sa.2, ss.588-600, 2008 (SCI-Expanded, Scopus)

52. 3D FEM simulation of steel quenching and investigation of the effect of asymmetric geometry on residual stress distribution

Simsir C., GÜR C. H.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , cilt.207, ss.211-221, 2008 (SCI-Expanded, Scopus)

53. A mathematical framework for simulation of thermal processing of materials: Application to steel quenching

Şimşir C., GÜR C. H.

Turkish Journal of Engineering and Environmental Sciences , cilt.32, sa.2, ss.85-100, 2008 (Scopus, TRDizin)

54. Investigation of the variations in microstructure and mechanical properties of dual-matrix ductile iron by Magnetic Barkhausen Noise analysis

GÜR C. H., Ozer M., Erdogan M.

RESEARCH IN NONDESTRUCTIVE EVALUATION , cilt.19, sa.1, ss.44-60, 2008 (SCI-Expanded, Scopus)

55. EFFECT OF ECAP AND POST-AGING PROCESSES ON 2024 ALUMINUM ALLOY

Saraloglu E., Tan E., GÜR C. H.

STEEL RESEARCH INTERNATIONAL , ss.467-471, 2008 (SCI-Expanded, Scopus)

56. Monitoring the microstructural changes during tempering of quenched SAE 5140 steel by magnetic barkhausen noise

Davut K., Guer C. H.

JOURNAL OF NONDESTRUCTIVE EVALUATION , cilt.26, ss.107-113, 2007 (SCI-Expanded, Scopus)

57. Characterization of dual-phase steels using magnetic barkhausen noise technique

KAPLAN M., Guer C. H., Erdogan M.

JOURNAL OF NONDESTRUCTIVE EVALUATION , cilt.26, ss.79-87, 2007 (SCI-Expanded, Scopus)

58. Comparison of magnetic Barkhausen noise and ultrasonic velocity measurements for microstructure evaluation of SAE 1040 and SAE 4140 steels

Gur C. H., Cam I.

MATERIALS CHARACTERIZATION , cilt.58, sa.5, ss.447-454, 2007 (SCI-Expanded, Scopus)

59. Investigation of as-quenched and tempered commercial steels by Magnetic Barkhausen Noise method

GÜR C. H., ÇAM İ.

International Journal of Microstructure and Materials Properties , cilt.1, sa.2, ss.208-218, 2006 (Scopus)

60. Determination of the influence of TiO2 on the elastic properties of a mica based glass ceramic by ultrasonic velocity measurements

Gur C. H., Ozturk A.

JOURNAL OF NON-CRYSTALLINE SOLIDS , cilt.351, ss.3655-3662, 2005 (SCI-Expanded, Scopus)

61. Characterization of microstructural phases of steels by sound velocity measurement

Gur C. H., Tuncer B.

MATERIALS CHARACTERIZATION , cilt.55, sa.2, ss.160-166, 2005 (SCI-Expanded, Scopus)

62. Microstructural investigation of SAE 1040 steel specimens by ultrasonic measurements

Gur C. H., Tuncer B.

INSIGHT , cilt.47, sa.7, ss.421-424, 2005 (SCI-Expanded, Scopus)

63. Nondestructive investigation of the effect of quenching and tempering on medium-carbon low alloy steels

Hakan Gür C. H., TUNCER B.

International Journal of Microstructure and Materials Properties , cilt.1, sa.1, ss.51-60, 2005 (Scopus)

64. Modeling of reversible γ/α transformations of low carbon steels in the intercritical temperature range

Reti T., Felde I., Gur H.

Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment , cilt.25, sa.5, ss.702-705, 2004 (Scopus)

65. Non-destructive investigation on the effect of precipitation hardening on impact toughness of 7020 Al-Zn-Mg alloy

Gur C. H., Yildiz I.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.382, ss.395-400, 2004 (SCI-Expanded, Scopus)

66. Investigation of microstructure-ultrasonic velocity relationship in SiCp-reinforced aluminium metal matrix composites

GÜR C. H.

Materials Science and Engineering A , cilt.361, ss.29-35, 2003 (SCI-Expanded, Scopus)

67. Effect of tube spinning and subsequent heat treatments on strength, microstructure and residual stress state of AISI/SAE type 4140 steel

Gur C. H., ARDA E.

MATERIALS SCIENCE AND TECHNOLOGY , cilt.19, sa.11, ss.1590-1594, 2003 (SCI-Expanded, Scopus)

68. Ultrasonic characterisation of hot-rolled and heat-treated plain carbon steels

Gur C., Keles Y.

INSIGHT , cilt.45, sa.9, ss.615-620, 2003 (SCI-Expanded, Scopus)

69. Investigation of the influence of specimen geometry on quench behaviour of steels by X-ray determination of surface residual stresses

GÜR C. H.

International Journal of Mechanical Sciences , cilt.44, sa.7, ss.1335-1347, 2002 (SCI-Expanded, Scopus)

70. Numerical investigation of non-homogenous plastic deformation in quenching process

GÜR C. H., Tekkaya A. E.

Materials Science and Engineering A , ss.164-169, 2001 (SCI-Expanded, Scopus)

71. Non-destructive microstructural characterization of aluminium matrix composites by ultrasonic techniques

GÜR C. H., ÖGEL B.

Materials Characterization , cilt.47, ss.227-233, 2001 (SCI-Expanded, Scopus)

72. Microstructural characterisation of ductile irons by measuring velocity and apparent attenuation of ultrasonic waves

Gur C., Aydinmakina B.

INSIGHT , cilt.43, sa.11, ss.731-734, 2001 (SCI-Expanded, Scopus)

73. Investigation of SiCp reinforced aluminium matrix composites by shear and longitudinal ultrasonic waves

GÜR C. H.

Insight: Non-Destructive Testing and Condition Monitoring , cilt.43, sa.11, ss.748-750, 2001 (SCI-Expanded, Scopus)

74. Untitled - Comment

Gur C.

INSIGHT , cilt.40, sa.9, ss.602, 1998 (SCI-Expanded, Scopus)

75. Non-Destructive Testing Committee of the Turkish Chamber of Metallurgical Engineers

GÜR C. H.

Insight: Non-Destructive Testing and Condition Monitoring , cilt.40, sa.9, ss.613-615, 1998 (SCI-Expanded, Scopus)

76. The Non-Destructive Testing Committee of the Turkish Chamber of Metallurgical Engineers

Gur C.

INSIGHT , cilt.40, sa.9, ss.613-615, 1998 (SCI-Expanded, Scopus)

77. Quality management system in non-destructive testing laboratories: Accreditation as a testing laboratory

Gur C.

INSIGHT , cilt.40, sa.9, ss.621-623, 1998 (SCI-Expanded, Scopus)

78. Numerical and experimental analysis of quench induced stresses and microstructures

GÜR C. H., TEKKAYA E.

JOURNAL OF MECHANICAL BEHAVIOUR OF MATERIALS , cilt.9, ss.237-256, 1998 (Hakemli Dergi)

79. Investigation of fatigue and creep damage in steam bailer pipes by ultrasonic testing

Tekin B., Gur C., Ankara O.

INSIGHT , cilt.39, sa.9, ss.626-629, 1997 (SCI-Expanded, Scopus)

80. Investigation of fatigue and creep damage in steam boiler pipes by ultrasonic testing

Tekin B., GÜR C. H., Ankara O.

Insight: Non-Destructive Testing and Condition Monitoring , cilt.39, sa.9, ss.626-629, 1997 (SCI-Expanded, Scopus)

81. Effect of boundary conditions and workpiece geometry on residual stresses and microstructure in quenching process

GÜR C. H., TEKKAYA E., Schuler W.

STEEL RESEARCH , cilt.67, sa.11, ss.501-506, 1996 (SCI-Expanded, Scopus)

82. Finite element simulation of quench hardening

Gur C., Tekkaya A.

STEEL RESEARCH , cilt.67, sa.7, ss.298-306, 1996 (SCI-Expanded, Scopus)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 65

1. 35th Anniversary of the German-Turkish Project (1988-1996) for Establishment of Welding Technology and Nondestructive Testing Research and Application Center

Gür C. H.

DGZfP - German NDT Society Annual Conference, Friedrichshafen, Ulm, Almanya, 15 - 17 Mayıs 2023, ss.1-6, (Tam Metin Bildiri)

2. Effect of Aging Heat Treatment on Microstructure and Mechanical Properties of Additively Manufactured 18Ni300 Maraging Steel

Aydın İ., Kaleli Alay T., Gür C. H.

Bosphorus International Heat Treatment Symposium, İstanbul, Türkiye, 11 - 13 Mayıs 2022, ss.78-84, (Tam Metin Bildiri)

3. Non-Destructive Methods for Assessment and Qualification of Metallic Components Additively Manufactured by Powder Bed Fusion Processes

Gür C. H.

International Conf on Adv Mater Sci & Eng and High Tech Devices Applications (ICMATSE 2022, Ankara, 27-29 Oct 2022), Ankara, Türkiye, 27 - 29 Ekim 2022, ss.22-27, (Tam Metin Bildiri)

4. Effect of Secondary Austenite on Fracture Toughness Properties of Wire Arc Additively Manufactured Duplex Stainless Steels

Yurtişik K., Ersan B., Akbarzadeh Chiniforoush E., Gür C. H.

International Additive Manufacturing Conference, IAM 2022, Lisbon, Portekiz, 19 - 21 Ekim 2022, (Yayınlanmadı)

5. Effects of Build Orientation and Process Parameters on Mechanical Behavior of IN718 Components Manufactured by Selective Laser Melting Method

Kaleli Alay T., Yağmur A., Gür C. H.

21st International Metallurgy & Materials Congress, İstanbul, Türkiye, 6 - 08 Ekim 2022, ss.599, (Özet Bildiri)

6. Effect of Submerged Arc Welding on High Temperature Tensile Properties of P91 Type Steel

Aslam J., Batıgün C., Gür C. H.

20. International Metallurgy and Materials Congress, İstanbul, Türkiye, 10 - 12 Haziran 2021, cilt.1, ss.492, (Özet Bildiri)

7. Effect of Heat Treatment on Microstructure and Mechanical Properties of Additively Manufactured 18Ni300 Maraging Steels

Aydın İ., Yağmur A., Tirkeş S., Gür C. H.

20. International Metallurgy and Materials Congress, İstanbul, Türkiye, 10 - 12 Haziran 2021, cilt.1, ss.243, (Özet Bildiri)

8. Optimizing the Heat Treatment Parameters of Additively Manufactured IN718 Components

Kaleli T., Yağmur A., Tirkeş S., Gür C. H.

20. International Metallurgy and Materials Congress, İstanbul, Türkiye, 10 - 12 Haziran 2021, cilt.1, ss.275, (Özet Bildiri)

9. Nondestructive Evaluation of Additively Manufactured Metallic Components

Gür C. H.

International Conference on Adv Mater Sci & Eng and High Tech Devices Applications (ICMATSE 2020), Ankara, Türkiye, 2 - 04 Ekim 2020, sa.117, ss.173, (Tam Metin Bildiri)

10. Kara ve Su-Altı Boru Hattı Sistemlerinde Yarı-Statik Kırılma Tokluğu ve Kırılma Direnç Eğrilerinin Belirlenmesi

Erol E., Tosun U., YURTIŞIK K., GÜR C. H.

11. Ulusal Kaynak Teknolojisi Kongresi, Ankara, Türkiye, 15 - 16 Kasım 2019, (Tam Metin Bildiri)

11. Materials Characterization using Nondestructive Methods

GÜR C. H.

INTERNATIONAL MATERIALS TECHNOLOGIESAND METALLURGY CONFERENCE, İstanbul, Türkiye, 31 Ekim - 01 Kasım 2019, (Özet Bildiri)

12. Investigating the Mechanical Behavior of the Modified P91 Steel at Elevated Temperatures

GÜR C. H., Aslam J.

7. Uluslararası Demir ve Çelik Sempozyumu, İzmir, Türkiye, 26 - 27 Eylül 2019, ss.374-376, (Tam Metin Bildiri)

13. Microstructure characterization of heat-treated ferromagnetic steels by magnetic barkhausen noise method

GÜR C. H.

5th World Congress on Mechanical, Chemical, and Material Engineering, MCM 2019, Lisbon, Portekiz, 15 - 17 Ağustos 2019, (Tam Metin Bildiri)

14. Non-Destructive Characterization of Cold Rolled Low-Carbon Steels

Grum J., Gür C. H., Yelbay H. İ., Sturm R., Pechnik B.

19th International Metallurgy Materials Congress, İstanbul, Türkiye, 25 - 27 Ekim 2018, ss.354-356, (Tam Metin Bildiri)

15. Non-Destructive Determination of Surface Residual Stresses in the Carburized SAE 8620 Steel Components

KALELİ T., GÜR C. H.

19th International Metallurgy and Materials Congress, İstanbul, Türkiye, 25 - 27 Ekim 2018, ss.1007-1010, (Tam Metin Bildiri)

16. Non-Destructive Evaluation of Surface Residual Stresses in Shot-Peened Steels

ÇALIŞKAN S., GÜR C. H.

19th International Metallurgy and Materials Congress, İstanbul, Türkiye, 25 - 27 Ekim 2018, ss.1031-1034, (Tam Metin Bildiri)

17. Effect of Residual Stresses on the Structural Safety of the Butt Welded Structural Steels

BATIGÜN C., GÜR C. H.

19th International Metallurgy and Materials Congress, İstanbul, Türkiye, 25 - 27 Ekim 2018, ss.1108-1111, (Tam Metin Bildiri)

18. Comparison of Nondesturctive Stress Measurement Techiques for Determinatuion of Residual Stresses in the Heat Treated Steels

Hizli H., GÜR C. H.

10th European Conference on Residual Stress (ECRS 10), Leuven, Belçika, 11 - 14 Eylül 2018, cilt.6, ss.165-170, (Tam Metin Bildiri)

19. E-learning Options for NDT Training

YELBAY H. İ., GÜR C. H.

12th European Conference for Nondestructive Testing, Gothenburg, İsveç, 11 - 15 Haziran 2018, (Tam Metin Bildiri)

20. Comparison of Two Procedures for Reliable Measurement of Residual Stress in Carburized Steels by Magnetic Barkhausen Noise Method

KALELİ T., GÜR C. H.

12th European Conf. for Nondestructive Testing, Gothenburg, İsveç, 11 - 15 Haziran 2018, (Tam Metin Bildiri)

21. Investigating the Relationship between Shot-Peening Severity and Fatigue Life of AISI 4140 Steel by Magnetic Barkhausen Method

ÇALIŞKAN S., GÜR C. H.

12th European Conf. for Nondestructive Testing, Gothenburg, İsveç, 11 - 15 Haziran 2018, (Özet Bildiri)

22. Nondestructive Determination of Curing State of Rubbers during Vulcanization Process

ülger c., Aydın E., YELBAY H. İ., Kutlu A., GÜR C. H.

12th European Conference for Nondestructive Testing, Gothenburg, İsveç, 11 - 15 Haziran 2018, (Tam Metin Bildiri)

23. Comparison of Two Procedures for Reliable Measurement of Residual Stress in Carburized Steels by Magnetic Barkhausen Noise Method

Gür C. H., Kaleli T.

12th European Conf. for NDT, Gothenburg, İsveç, 11 - 15 Haziran 2018, ss.22737, (Tam Metin Bildiri)

24. Kaynak İşlemi Nedeniyle Oluşan Kalıntı Gerilmelerin Mikro-Manyetik Teknikle Tahribatsız Olarak Ölçülmesi,

KALELİ T., YELBAY H. İ., GÜR C. H.

10. Ulusal Kaynak Teknolojisi Kongresi, Ankara, Türkiye, 17 - 18 Kasım 2017, (Tam Metin Bildiri)

25. Alın Kaynaklı Yapısal Çeliklerdeki Kalıntı Dağılımının Konstrüksiyon Güvenliğine Etkisi

GÜR C. H., BATIGÜN C.

10. Ulusal Kaynak Teknolojisi Kongresi, Ankara, Türkiye, 17 - 18 Kasım 2017, (Tam Metin Bildiri)

26. Monitoring the Directional Variations of Magnetic Barkhausen Emission in Ferritic Steel Sheets

GÜR C. H., AKÇAOĞLU Ü.

12th Int. Conf. on Barkhausen Noise and Micromagnetic Testing, Dresden, Almanya, 24 - 26 Eylül 2017, (Tam Metin Bildiri)

27. Nondestructive Monitoring of Pearlite Degradation in Medium Carbon Steels by Magnetic Barkhausen Noise Method

GÜR C. H.

14th Int Conf. of Slovenian Society for Non-Destructive Testing, Portoroz, Slovenya, 4 - 06 Eylül 2017, (Tam Metin Bildiri)

28. The Effects of ECAP on the Precipitation Behavior of Al 2024

TAN G., KALAY Y. E., GÜR C. H.

TMS 2017 146th Annual Meeting and Exhibition, 26 Şubat - 02 Mart 2017, (Özet Bildiri)

29. Nondestructive Characterization of Microstructures of Heat-Treated Steels by Magnetic Barkhausen Noise Technique

GÜR C. H.

TMS Annual Meeting and Exhibition / Symposium on Characterization of Minerals, Metals, and Materials, California, Amerika Birleşik Devletleri, 01 Ocak 2017, ss.371-376, (Tam Metin Bildiri)

30. New possibilities on training of NDT personnel

YELBAY H. İ., GÜR C. H., Yilmaz E.

14th International Conference of the Slovenian Society for Non-Destructive Testing: Application of Contemporary Non-Destructive Testing in Engineering, St. Bernardin/Portoroz, Slovenya, 4 - 06 Eylül 2017, ss.219-222, (Tam Metin Bildiri)

31. Effect of Microstructure on Fracture Toughness of Coarse Grain Heat Aff ected Zone in As Welded X70M Steel

CAGIRICI M., TOSUN U., GÜR C. H.

18th International Metallurgy and Materials Congress, İstanbul, Türkiye, 29 Eylül - 01 Ekim 2016, ss.928-931, (Tam Metin Bildiri)

32. Measurement of Residual Stresses in the Carburized Steels by Non Destructive Techniques

HIZLI H., KALELI T., GÜR C. H.

18th International Metallurgy and Materials Congress, İstanbul, Türkiye, 29 Eylül - 01 Ekim 2016, ss.439-442, (Tam Metin Bildiri)

33. Non Destructive Determination of Residual Stresses in the Spiral Submerged Arc Welded Steel Pipes

KALELI T., GÜR C. H.

19th World Congress for Non-Destructive Testing, Munich, Almanya, 13 - 17 Haziran 2016, (Tam Metin Bildiri)

34. PoD Analysis of Phased Array and Conventional Ultrasonic Techniques

YALCIN M., YELBAY H. İ., GÜR C. H.

19th World Congress for Non-Destructive Testing, Munich, Almanya, 13 - 17 Haziran 2016, (Tam Metin Bildiri)

35. Non destructive Monitoring of Variations in Microstructure and Residual Stress in the Carburized Steel

HIZLI H., DAVUT K., ŞİMŞİR C., GÜR C. H.

19th World Congress for Non-Destructive Testing, Munich, Almanya, 13 - 17 Haziran 2016, (Tam Metin Bildiri)

36. Nondestructive Monitoring of the Variations in Microstructure and Residual Stress in the Carburized Steels

Hızlı H., DAVUT K., ŞİMŞİR C., GÜR C. H.

19th World Conference on Non-Destructive Testing, Munich, Almanya, 13 - 17 Haziran 2016, (Tam Metin Bildiri)

37. Sementasyon İşlemi Uygulanan Çeliklerdeki Kalıntı Gerilmelerin Tahribatsız Tekniklerle Ölçülmesi

HIZLI H., KALELI T., GÜR C. H.

5. ISIL ISLEM SEMPOZYUMU, İstanbul, Türkiye, 2 - 03 Haziran 2016, ss.59-66, (Tam Metin Bildiri)

38. S235 Çeliğinin MAG Köşe Kaynağında Farklı Sabitleme Noktalarına Bağlı Gelişen Çarpılma Eğilimlerinin Sonlu Elemanlar Yöntemi ile Tahmin Edilmesi

BEDİR E., BATIGÜN C., GÜR C. H.

9. Ulusal Kaynak Teknolojisi Kongresi, Ankara, Türkiye, 20 - 21 Kasım 2015, ss.191-207, (Tam Metin Bildiri)

39. Demiryolu raylarında Kalıntı Gerilimlerin Manyetik Barkhausen Gürültüsü Yöntemi ile Ölçülmesi

YELBAY H. İ., GÜR C. H.

9. Ulusal Kaynak Teknolojisi Kongresi, Ankara, Türkiye, 20 - 21 Kasım 2015, ss.301-307, (Tam Metin Bildiri)

40. Applicability of Micromagnetic and Ultrasonic Methods for Non Destructive Monitoring of Microstructure Variations in Steels Induced by Heat Treatment

GÜR C. H.

5th International Conference on Distortion Engineering, Bremen, Almanya, 23 - 25 Eylül 2015, ss.329-334, (Tam Metin Bildiri)

41. Nondestructive Monitoring of the Effects of Carburizing on 19CrNi5H Steel by Magnetic Barkhausen Noise Method

HIZLI H., GÜR C. H.

11th International Conference on Barkhausen Noise & Micromagnetic Testing, Kuşadası, Türkiye, 18 - 20 Haziran 2015, (Tam Metin Bildiri)

42. Monitoring the Effects of Subsequent Weld Runs on Surface Residual Stresses in Steel Plates by Magnetic Barkhausen Noise Method

ERİAN G., BATIGÜN C., ÇAM İ., GÜR C. H.

11th International Conference on Barkhausen Noise & Micromagnetic Testing, Kuşadası, Türkiye, 18 - 20 Haziran 2015, (Tam Metin Bildiri)

43. Measuring the Surface Residual Stresses in Shot Peened Steel Components by Magnetic Barkhausen Noise Method 11th Int Conf on Barkhausen Noise Micromagnetic Testing

GÜR C. H., Savaş S.

11th International Conference on Barkhausen Noise & Micromagnetic Testing, Kuşadası, Türkiye, 18 - 20 Haziran 2015, (Tam Metin Bildiri)

44. NONDESTRUCTIVE MONITORING OF VARIATIONS OF RESIDUAL STRESSES IN STEEL WELDMENTS BY MAGNETIC BARKHAUSEN NOISE METHOD

GÜR C. H., Erian G., BATIGÜN C., ÇAM İ.

ASME Pressure Vessels and Piping Conference (PVP-2013), Paris, Fransa, 14 - 18 Temmuz 2013, (Tam Metin Bildiri)

45. Investigating the effects of quenching and tempering on steel microstructures by Magnetic Barkhausen Noise method

GÜR C. H., ÇAM İ.

6th International Quenching and Control of Distortion Conference: Quenching Control and Distortion, Including the 4th International Distortion Engineering Conference, Chicago, IL, Amerika Birleşik Devletleri, 9 - 13 Eylül 2012, ss.258-265, (Tam Metin Bildiri)

46. Investigating the effect of number of weld passes on the residual stress state of steel plates by micro magnetic method

Erian G., Batıgün C., ÇAM İ., GÜR C. H.

16th International Metallurgy and Materials Congress, At Istanbul, Volume: CD Proceedings, pp. 903-911, İstanbul, Türkiye, 13 - 15 Eylül 2012, ss.903-911, (Tam Metin Bildiri)

47. Effect of weld repair on microstructure and mechanical properties of API 5LX65 steel

BATIGÜN C., Garipova N., Demircan M., GÜR C. H.

International Conference on Advances in Welding Science and Technology for Construction, Energy and Transportation, AWST 2010, held in Conjunction with the 63rd Annual Assembly of the International Institute of Welding, IIW 2010, İstanbul, Türkiye, 11 - 17 Temmuz 2010, ss.643-649, (Tam Metin Bildiri)

48. Metallurgical influence on quench distortion of SAE 52100 long cylinders

Maradit B. P., Simsir C., Lubben T., Gur C. H.

65th ABM International Congress, 18th IFHTSE Congress and 1st TMS/ABM International Materials Congress 2010, Rio de Janeiro, Brezilya, 26 - 30 Temmuz 2010, cilt.6, ss.4833-4841, (Tam Metin Bildiri)

49. PREDICTION OF SURFACE RESIDUAL STRESSES IN BUTT-WELDED STEEL PLATES BY MAGNETIC BARKHAUSEN NOISE ANALYSIS

GÜR C. H., YELBAY H. İ., ÇAM İ.

10th European Conference on Non-Destructive Testing (ECNDT 2010), Moscow, Rusya, 7 - 11 Haziran 2010, ss.31-36, (Tam Metin Bildiri)

50. Kaynakların Tahribatsız Muayenesi

KOLANKAYA O., DOYUM A. B., YELBAY H. İ., GÜR C. H.

Proc. 1st National Welding Technology Conference, 11 Haziran 2009, ss.698-709, (Tam Metin Bildiri)

51. Microstructural characterization of sic reinforced aluminum matrix composites

Makszimus A., Pieczonka T., GÜR C. H., Tan E., Gacsi Z.

European International Powder Metallurgy Congress and Exhibition, Euro PM 2009, Copenhagen, Danimarka, 12 - 14 Ekim 2009, cilt.3, (Tam Metin Bildiri)

52. A new framework for simulation of heat treatments

ŞİMŞİR C., GÜR C. H.

2nd International Conference on Distortion Engineering (IDE2008), Bremen, Almanya, 17 - 19 Eylül 2008, ss.471-479, (Tam Metin Bildiri)

53. Investigation of the microstructure and hardness of SiCP reinforced aluminum matrix composites

Makszimus A., Gácsi Z., GÜR C. H.

6th Hungarian Conference on Materials Science, Siofok, Macaristan, 14 - 16 Ekim 2007, cilt.589, ss.239-244, (Tam Metin Bildiri)

54. Effect of ECAP and post-aging processes on 2024 aluminum alloy

Saraloglu E., Tan E., GÜR C. H.

12th International Conference on Metal Forming, METAL FORMING 2008, Krakow, Polonya, 21 - 24 Eylül 2008, cilt.79, ss.467-471, (Tam Metin Bildiri)

55. Finite element investigation of the effect of hardening behavior of alloys on equal channel angular pressing performance

Karpuz P., Simsir C., GÜR C. H., Kim H. S.

4th International Conference on Nanomaterials by Severe Plastic Deformation, Goslar, Almanya, 18 - 22 Ağustos 2008, ss.1021-1026, (Tam Metin Bildiri)

56. INVESTIGATION OF THE MICROSTRUCTURE AND HARDNESS OF SiCP REINFORCED ALUMINUM MATRIX COMPOSITES

MAKSZIMUS A., GACSI Z., Guer C. H.

6th Hungarian Conference on Materials, Science, Testing and Informatics, Siofok, Macaristan, 14 - 16 Ekim 2007, cilt.589, ss.239-240, (Tam Metin Bildiri)

57. Microstructure characterization of SiCp-reinforced aluminum matrix composites by newly developed computer-based algorithms

Kretz F., Gacsi Z., GÜR C. H.

2006 Powder Metallurgy World Congress and Exhibition, PM 2006, Busan, Güney Kore, 24 - 28 Eylül 2006, ss.909-912, (Tam Metin Bildiri)

58. Investigation of microstructure inhomogeneity in SiCp-reinforced aluminum matrix composites

Gacsi Z., GÜR C. H., Makszimus A., Pieczonka T.

2006 Powder Metallurgy World Congress and Exhibition, PM 2006, Busan, Güney Kore, 24 - 28 Eylül 2006, ss.901-904, (Tam Metin Bildiri)

59. Microstructure characterization of SiCp-reinforced aluminum matrix composites by newly developed computer-based algorithms

Kretz F., Gacsi Z., GÜR C. H.

Power Metallurgy World Congress and Exhibition 2006, Busan, Güney Kore, 24 - 28 Eylül 2006, ss.909-910, (Tam Metin Bildiri)

60. Ötektoidaltı çeliklerde Ae1-Ae3 sıcaklık aralığında östenit/ferrit faz dönüşümü için kinetik model

GÜR C. H., KOLANKAYA O.

CD Proc of 12th Int Metallurgy-Materials Congress, 28 Eylül 2005, ss.1777-1783, (Tam Metin Bildiri)

61. FE Simulation of Steel Quenching to Investigate Residual Stresses and Distortion

ŞİMŞİR C., GÜR C. H.

1st International Conference on Distortion Engineering (IDE2005), Bremen, Almanya, 14 - 16 Eylül 2005, ss.407-414, (Tam Metin Bildiri)

62. Comparison of the deep drawability of aluminum and steel using numerical simulation experiments

Sonmez C., Tekkaya A., Gur C.

6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Michigan, Amerika Birleşik Devletleri, 15 - 19 Ağustos 2005, cilt.778, ss.119-124, (Tam Metin Bildiri)

63. Modeling of reversible gamma/alpha transformations of low carbon steels in the intercritical temperature range

Reti T., Felde I., Gur H.

14th Congress of the International-Federation-for-Heat-Treatment-and-Surface-Engineering, Shanghai, Çin, 26 - 28 Ekim 2004, ss.702-705, (Tam Metin Bildiri)

64. Investigation of internal stresses and microstructural evolution in quenched steel components by finite element analysis

Gur C., Tekkaya A., Ozturk T., Schuler W.

5th European Conference on Advanced Materials and Processes and Applications (EUROMAT 97), Maastricht, Hollanda, 21 - 23 Nisan 1997, ss.637-640, (Tam Metin Bildiri)

65. Numerical and experimental investigation of quench process

Gur C., Tekkaya A., Ozturk T.

2nd International Conference on Quenching and the Control of Distortion, Ohio, Amerika Birleşik Devletleri, 4 - 07 Kasım 1996, ss.305-314, (Tam Metin Bildiri)

Kitaplar 6

Ansiklopedide Bölümler 1

1. Encyclopedia of Iron, Steel, and Their Alloys

Şimşir C., Gür C. H.

CRC, New York , ss.2892-2939 , 2016

Metrikler

Yayın

160

Yayın (WoS)

Yayın (Scopus)

Atıf (WoS)

1388

H-İndeks (WoS)

Atıf (Scopus)

1665

H-İndeks (Scopus)

Atıf (Scholar)

2770

H-İndeks (Scholar)

Atıf (Sobiad)

H-İndeks (Sobiad)

Proje

Tez Danışmanlığı

Açık Erişim

BM Sürdürülebilir Kalkınma Amaçları

Yayınlar & Eserler