Prof. CEMİL HAKAN GÜR

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE , no.13, pp.5106-5114, 2012 (SCI-Expanded) Sustainable Development

Determining the Elastic Properties of Modified Polystyrenes by Sound Velocity Measurements

Oral I., Guzel H., Ahmetli G., GÜR C. H.

JOURNAL OF APPLIED POLYMER SCIENCE , vol.121, no.6, pp.3425-3432, 2011 (SCI-Expanded)

Mechanical and microstructural characterization of 6061 aluminum alloy strips severely deformed by Dissimilar Channel Angular Pressing

Tan E., KİBAR A. A., Gur C. H.

MATERIALS CHARACTERIZATION , vol.62, no.4, pp.391-397, 2011 (SCI-Expanded)

Monitoring variation of surface residual stresses in shot peened steel components by the magnetic Barkhausen noise method

SAVAŞ S., GÜR C. H.

INSIGHT , vol.52, no.12, pp.672-677, 2010 (SCI-Expanded)

Monitoring the Microstructural Evolution in Spheroidized Steels by Magnetic Barkhausen Noise Measurements

DAVUT K., GÜR C. H.

JOURNAL OF NONDESTRUCTIVE EVALUATION , vol.29, no.4, pp.241-247, 2010 (SCI-Expanded)

INFLUENCE OF DCAP PROCESS ON THE MECHANICAL PROPERTIES OF 6061 Al-ALLOY SHEET

Tan E., GÜR C. H.

REVIEWS ON ADVANCED MATERIALS SCIENCE , vol.25, no.2, pp.189-193, 2010 (SCI-Expanded)

Quantitative analysis of the influence of strain hardening on equal channel angular pressing process

ŞİMŞİR C., Karpuz P., GÜR C. H.

COMPUTATIONAL MATERIALS SCIENCE , vol.48, no.3, pp.633-639, 2010 (SCI-Expanded)

Characterization of ultra-fine grained steel samples produced by high pressure torsion via magnetic Barkhausen noise analysis

Bayramoglu S., GÜR C. H., Alexandrov I. V., Abramova M. M.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , vol.527, pp.927-933, 2010 (SCI-Expanded)

A Simulation of the Quenching Process for Predicting Temperature, Microstructure and Residual Stresses

Simsir C., GÜR C. H.

STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING , vol.56, no.2, pp.93-103, 2010 (SCI-Expanded)

Non-destructive determination of residual stress state in steel weldments by Magnetic Barkhausen Noise technique

YELBAY H. İ., ÇAM İ., Guer C. H.

NDT & E INTERNATIONAL , vol.43, no.1, pp.29-33, 2010 (SCI-Expanded)

Investigating the effects of hardening of aluminium alloys on equal-channel angular pressing-A finite-element study

Karpuz P., Simsir C., GÜR C. H.

Materials Science and Engineering A , vol.503, pp.148-151, 2009 (SCI-Expanded)

A review on modeling and simulation of quenching

Şimşir C., Hakan Gür C. H.

Journal of ASTM International , vol.6, no.2, 2009 (SCI-Expanded)

A FEM based framework for simulation of thermal treatments: Application to steel quenching

Şimşir C., GÜR C. H.

COMPUTATIONAL MATERIALS SCIENCE , vol.44, no.2, pp.588-600, 2008 (SCI-Expanded)

Utilization of Non-destructive Methods for Determining the Effect of Age-Hardening on Impact Toughness of 2024 Al-Cu-Mg Alloy

GÜR C. H., Yildiz I.

JOURNAL OF NONDESTRUCTIVE EVALUATION , vol.27, no.4, pp.99-104, 2008 (SCI-Expanded)

3D FEM simulation of steel quenching and investigation of the effect of asymmetric geometry on residual stress distribution

Simsir C., GÜR C. H.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , vol.207, pp.211-221, 2008 (SCI-Expanded)

Investigation of the variations in microstructure and mechanical properties of dual-matrix ductile iron by Magnetic Barkhausen Noise analysis

GÜR C. H., Ozer M., Erdogan M.

RESEARCH IN NONDESTRUCTIVE EVALUATION , vol.19, no.1, pp.44-60, 2008 (SCI-Expanded)

EFFECT OF ECAP AND POST-AGING PROCESSES ON 2024 ALUMINUM ALLOY

Saraloglu E., Tan E., GÜR C. H.

STEEL RESEARCH INTERNATIONAL , pp.467-471, 2008 (SCI-Expanded)

Characterization of dual-phase steels using magnetic barkhausen noise technique

KAPLAN M., Guer C. H., Erdogan M.

JOURNAL OF NONDESTRUCTIVE EVALUATION , vol.26, pp.79-87, 2007 (SCI-Expanded)

Monitoring the microstructural changes during tempering of quenched SAE 5140 steel by magnetic barkhausen noise

Davut K., Guer C. H.

JOURNAL OF NONDESTRUCTIVE EVALUATION , vol.26, pp.107-113, 2007 (SCI-Expanded)

Comparison of magnetic Barkhausen noise and ultrasonic velocity measurements for microstructure evaluation of SAE 1040 and SAE 4140 steels

Gur C. H., Cam I.

MATERIALS CHARACTERIZATION , vol.58, no.5, pp.447-454, 2007 (SCI-Expanded)

Determination of the influence of TiO2 on the elastic properties of a mica based glass ceramic by ultrasonic velocity measurements

Gur C. H., Ozturk A.

JOURNAL OF NON-CRYSTALLINE SOLIDS , vol.351, pp.3655-3662, 2005 (SCI-Expanded)

Characterization of microstructural phases of steels by sound velocity measurement

Gur C. H., Tuncer B.

MATERIALS CHARACTERIZATION , vol.55, no.2, pp.160-166, 2005 (SCI-Expanded)

Microstructural investigation of SAE 1040 steel specimens by ultrasonic measurements

Gur C. H., Tuncer B.

INSIGHT , vol.47, no.7, pp.421-424, 2005 (SCI-Expanded)

Non-destructive investigation on the effect of precipitation hardening on impact toughness of 7020 Al-Zn-Mg alloy

Gur C. H., Yildiz I.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , vol.382, pp.395-400, 2004 (SCI-Expanded)

Investigation of microstructure-ultrasonic velocity relationship in SiCp-reinforced aluminium metal matrix composites

GÜR C. H.

Materials Science and Engineering A , vol.361, pp.29-35, 2003 (SCI-Expanded)

Effect of tube spinning and subsequent heat treatments on strength, microstructure and residual stress state of AISI/SAE type 4140 steel

Gur C. H., ARDA E.

MATERIALS SCIENCE AND TECHNOLOGY , vol.19, no.11, pp.1590-1594, 2003 (SCI-Expanded)

Ultrasonic characterisation of hot-rolled and heat-treated plain carbon steels

Gur C., Keles Y.

INSIGHT , vol.45, no.9, pp.615-620, 2003 (SCI-Expanded)

Investigation of the influence of specimen geometry on quench behaviour of steels by X-ray determination of surface residual stresses

GÜR C. H.

International Journal of Mechanical Sciences , vol.44, no.7, pp.1335-1347, 2002 (SCI-Expanded)

Numerical investigation of non-homogenous plastic deformation in quenching process

GÜR C. H., Tekkaya A. E.

Materials Science and Engineering A , pp.164-169, 2001 (SCI-Expanded)

Investigation of SiCp reinforced aluminium matrix composites by shear and longitudinal ultrasonic waves

GÜR C. H.

Insight: Non-Destructive Testing and Condition Monitoring , vol.43, no.11, pp.748-750, 2001 (SCI-Expanded)

Non-destructive microstructural characterization of aluminium matrix composites by ultrasonic techniques

GÜR C. H., ÖGEL B.

Materials Characterization , vol.47, pp.227-233, 2001 (SCI-Expanded)

Microstructural characterisation of ductile irons by measuring velocity and apparent attenuation of ultrasonic waves

Gur C., Aydinmakina B.

INSIGHT , vol.43, no.11, pp.731-734, 2001 (SCI-Expanded)

Non-Destructive Testing Committee of the Turkish Chamber of Metallurgical Engineers

GÜR C. H.

Insight: Non-Destructive Testing and Condition Monitoring , vol.40, no.9, pp.613-615, 1998 (SCI-Expanded)

The Non-Destructive Testing Committee of the Turkish Chamber of Metallurgical Engineers

Gur C.

INSIGHT , vol.40, no.9, pp.613-615, 1998 (SCI-Expanded)

Untitled - Comment

Gur C.

INSIGHT , vol.40, no.9, pp.602, 1998 (SCI-Expanded)

Quality management system in non-destructive testing laboratories: Accreditation as a testing laboratory

Gur C.

INSIGHT , vol.40, no.9, pp.621-623, 1998 (SCI-Expanded)

Investigation of fatigue and creep damage in steam bailer pipes by ultrasonic testing

Tekin B., Gur C., Ankara O.

INSIGHT , vol.39, no.9, pp.626-629, 1997 (SCI-Expanded)

Investigation of fatigue and creep damage in steam boiler pipes by ultrasonic testing

Tekin B., GÜR C. H., Ankara O.

Insight: Non-Destructive Testing and Condition Monitoring , vol.39, no.9, pp.626-629, 1997 (SCI-Expanded)

Effect of boundary conditions and workpiece geometry on residual stresses and microstructure in quenching process

GÜR C. H., TEKKAYA E., Schuler W.

STEEL RESEARCH , vol.67, no.11, pp.501-506, 1996 (SCI-Expanded)

Finite element simulation of quench hardening

Gur C., Tekkaya A.

STEEL RESEARCH , vol.67, no.7, pp.298-306, 1996 (SCI-Expanded)

Articles Published in Other Journals

An Empirical Approach to Analyze Creep Rupture Behavior of P91 Steel

Aslam M. J., GÜR C. H.

Korean Journal of Materials Research , vol.31, no.5, pp.255-263, 2021 (ESCI)

Review of Residual Stress Measurement by Magnetic Barkhausen Noise Technique

GÜR C. H.

MATERIALS PERFORMANCE AND CHARACTERIZATION , vol.7, no.4, pp.504-525, 2018 (ESCI)

Sementasyon İşlemi Uygulanan Çeliklerdeki Kalıntı Gerilmelerin Tahribatsız Tekniklerle Ölçülmesi

HIZLI H., KALELİ T., GÜR C. H.

METALURJİ , pp.30-35, 2016 (Peer-Reviewed Journal)

Description of the PM process by using Ishikawa-analysis

Simon A., Kovács K., GÜR C. H., Pieczonka T., Gácsi Z.

Materials Science Forum , vol.752, pp.48-56, 2013 (Scopus)

Characterization of steel microstructures by magnetic barkhausen noise technique

GÜR C. H.

RILEM Bookseries , vol.6, pp.499-504, 2012 (Scopus)

Simulation of Quenching: A Review

GÜR C. H., Şimşir C.

MATERIALS PERFORMANCE AND CHARACTERIZATION , vol.1, no.1, 2012 (ESCI)

Metallurgical influence on quench distortion of SAE 52100 long cylinders

Maradit B., Şimşir C., Lübben T., GÜR C. H.

International Heat Treatment and Surface Engineering , vol.5, no.2, pp.57-60, 2011 (Scopus)

A new framework for simulation of heat treatments

Şimşir C., GÜR C. H.

International Journal of Microstructure and Materials Properties , vol.5, pp.399-411, 2010 (Scopus)

A review on modeling and simulation of quenching

Şimşir C., Hakan Gür C. H.

ASTM Special Technical Publication , pp.117-156, 2010 (Scopus)

Simulation of equal channel angular pressing applied to produce structures with ultrafine-sized grains

Karpuz P., ŞİMŞİR C., Hakan Gür C. H.

International Journal of Microstructure and Materials Properties , vol.4, no.3, pp.356-367, 2009 (Scopus)

A mathematical framework for simulation of thermal processing of materials: Application to steel quenching

Şimşir C., GÜR C. H.

Turkish Journal of Engineering and Environmental Sciences , vol.32, no.2, pp.85-100, 2008 (Scopus)

Investigation of as-quenched and tempered commercial steels by Magnetic Barkhausen Noise method

GÜR C. H., ÇAM İ.

International Journal of Microstructure and Materials Properties , vol.1, no.2, pp.208-218, 2006 (Scopus)

Nondestructive investigation of the effect of quenching and tempering on medium-carbon low alloy steels

Hakan Gür C. H., TUNCER B.

International Journal of Microstructure and Materials Properties , vol.1, no.1, pp.51-60, 2005 (Scopus)

Modeling of reversible γ/α transformations of low carbon steels in the intercritical temperature range

Reti T., Felde I., Gur H.

Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment , vol.25, no.5, pp.702-705, 2004 (Scopus)

Numerical and experimental analysis of quench induced stresses and microstructures

GÜR C. H., TEKKAYA E.

JOURNAL OF MECHANICAL BEHAVIOUR OF MATERIALS , vol.9, pp.237-256, 1998 (Peer-Reviewed Journal)

Refereed Congress / Symposium Publications in Proceedings

35th Anniversary of the German-Turkish Project (1988-1996) for Establishment of Welding Technology and Nondestructive Testing Research and Application Center

Gür C. H.

DGZfP - German NDT Society Annual Conference, Friedrichshafen, Ulm, Germany, 15 - 17 May 2023, pp.1-6

Effect of Aging Heat Treatment on Microstructure and Mechanical Properties of Additively Manufactured 18Ni300 Maraging Steel

Aydın İ., Kaleli Alay T., Gür C. H.

Bosphorus International Heat Treatment Symposium, İstanbul, Turkey, 11 - 13 May 2022, pp.78-84

Non-Destructive Methods for Assessment and Qualification of Metallic Components Additively Manufactured by Powder Bed Fusion Processes

Gür C. H.

International Conf on Adv Mater Sci & Eng and High Tech Devices Applications (ICMATSE 2022, Ankara, 27-29 Oct 2022), Ankara, Turkey, 27 - 29 October 2022, pp.22-27

Effect of Secondary Austenite on Fracture Toughness Properties of Wire Arc Additively Manufactured Duplex Stainless Steels

Yurtişik K., Ersan B., Akbarzadeh Chiniforoush E., Gür C. H.

International Additive Manufacturing Conference, IAM 2022, Lisbon, Portugal, 19 - 21 October 2022

Effects of Build Orientation and Process Parameters on Mechanical Behavior of IN718 Components Manufactured by Selective Laser Melting Method

Kaleli Alay T., Yağmur A., Gür C. H.

21st International Metallurgy & Materials Congress, İstanbul, Turkey, 6 - 08 October 2022, pp.599

Effect of Submerged Arc Welding on High Temperature Tensile Properties of P91 Type Steel

Aslam J., Batıgün C., Gür C. H.

20. International Metallurgy and Materials Congress, İstanbul, Turkey, 10 - 12 June 2021, vol.1, pp.492

Effect of Heat Treatment on Microstructure and Mechanical Properties of Additively Manufactured 18Ni300 Maraging Steels

Aydın İ., Yağmur A., Tirkeş S., Gür C. H.

20. International Metallurgy and Materials Congress, İstanbul, Turkey, 10 - 12 June 2021, vol.1, pp.243

Optimizing the Heat Treatment Parameters of Additively Manufactured IN718 Components

Kaleli T., Yağmur A., Tirkeş S., Gür C. H.

20. International Metallurgy and Materials Congress, İstanbul, Turkey, 10 - 12 June 2021, vol.1, pp.275

Nondestructive Evaluation of Additively Manufactured Metallic Components

Gür C. H.

International Conference on Adv Mater Sci & Eng and High Tech Devices Applications (ICMATSE 2020), Ankara, Turkey, 2 - 04 October 2020, no.117, pp.173

Kara ve Su-Altı Boru Hattı Sistemlerinde Yarı-Statik Kırılma Tokluğu ve Kırılma Direnç Eğrilerinin Belirlenmesi

Erol E., Tosun U., YURTIŞIK K., GÜR C. H.

11. Ulusal Kaynak Teknolojisi Kongresi, Ankara, Turkey, 15 - 16 November 2019

Materials Characterization using Nondestructive Methods

GÜR C. H.

INTERNATIONAL MATERIALS TECHNOLOGIESAND METALLURGY CONFERENCE, İstanbul, Turkey, 31 October - 01 November 2019

Investigating the Mechanical Behavior of the Modified P91 Steel at Elevated Temperatures

GÜR C. H., Aslam J.

7. Uluslararası Demir ve Çelik Sempozyumu, İzmir, Turkey, 26 - 27 September 2019, pp.374-376

Microstructure characterization of heat-treated ferromagnetic steels by magnetic barkhausen noise method

GÜR C. H.

5th World Congress on Mechanical, Chemical, and Material Engineering, MCM 2019, Lisbon, Portugal, 15 - 17 August 2019

Non-Destructive Characterization of Cold Rolled Low-Carbon Steels

Grum J., Gür C. H., Yelbay H. İ., Sturm R., Pechnik B.

19th International Metallurgy Materials Congress, İstanbul, Turkey, 25 - 27 October 2018, pp.354-356

Non-Destructive Determination of Surface Residual Stresses in the Carburized SAE 8620 Steel Components

KALELİ T., GÜR C. H.

19th International Metallurgy and Materials Congress, İstanbul, Turkey, 25 - 27 October 2018, pp.1007-1010

Non-Destructive Evaluation of Surface Residual Stresses in Shot-Peened Steels

ÇALIŞKAN S., GÜR C. H.

19th International Metallurgy and Materials Congress, İstanbul, Turkey, 25 - 27 October 2018, pp.1031-1034

Effect of Residual Stresses on the Structural Safety of the Butt Welded Structural Steels

BATIGÜN C., GÜR C. H.

19th International Metallurgy and Materials Congress, İstanbul, Turkey, 25 - 27 October 2018, pp.1108-1111

Comparison of Nondesturctive Stress Measurement Techiques for Determinatuion of Residual Stresses in the Heat Treated Steels

Hizli H., GÜR C. H.

10th European Conference on Residual Stress (ECRS 10), Leuven, Belgium, 11 - 14 September 2018, vol.6, pp.165-170

E-learning Options for NDT Training

YELBAY H. İ., GÜR C. H.

12th European Conference for Nondestructive Testing, Gothenburg, Sweden, 11 - 15 June 2018

Comparison of Two Procedures for Reliable Measurement of Residual Stress in Carburized Steels by Magnetic Barkhausen Noise Method

KALELİ T., GÜR C. H.

12th European Conf. for Nondestructive Testing, Gothenburg, Sweden, 11 - 15 June 2018

Investigating the Relationship between Shot-Peening Severity and Fatigue Life of AISI 4140 Steel by Magnetic Barkhausen Method

ÇALIŞKAN S., GÜR C. H.

12th European Conf. for Nondestructive Testing, Gothenburg, Sweden, 11 - 15 June 2018

Nondestructive Determination of Curing State of Rubbers during Vulcanization Process

ülger c., Aydın E., YELBAY H. İ., Kutlu A., GÜR C. H.

12th European Conference for Nondestructive Testing, Gothenburg, Sweden, 11 - 15 June 2018

Comparison of Two Procedures for Reliable Measurement of Residual Stress in Carburized Steels by Magnetic Barkhausen Noise Method

Gür C. H., Kaleli T.

12th European Conf. for NDT, Gothenburg, Sweden, 11 - 15 June 2018, pp.22737

Kaynak İşlemi Nedeniyle Oluşan Kalıntı Gerilmelerin Mikro-Manyetik Teknikle Tahribatsız Olarak Ölçülmesi,

KALELİ T., YELBAY H. İ., GÜR C. H.

10. Ulusal Kaynak Teknolojisi Kongresi, Ankara, Turkey, 17 - 18 November 2017

Alın Kaynaklı Yapısal Çeliklerdeki Kalıntı Dağılımının Konstrüksiyon Güvenliğine Etkisi

GÜR C. H., BATIGÜN C.

10. Ulusal Kaynak Teknolojisi Kongresi, Ankara, Turkey, 17 - 18 November 2017

Monitoring the Directional Variations of Magnetic Barkhausen Emission in Ferritic Steel Sheets

GÜR C. H., AKÇAOĞLU Ü.

12th Int. Conf. on Barkhausen Noise and Micromagnetic Testing, Dresden, Germany, 24 - 26 September 2017

Nondestructive Monitoring of Pearlite Degradation in Medium Carbon Steels by Magnetic Barkhausen Noise Method

GÜR C. H.

14th Int Conf. of Slovenian Society for Non-Destructive Testing, Portoroz, Slovenia, 4 - 06 September 2017

The Effects of ECAP on the Precipitation Behavior of Al 2024

TAN G., KALAY Y. E., GÜR C. H.

TMS 2017 146th Annual Meeting and Exhibition, 26 February - 02 March 2017

Nondestructive Characterization of Microstructures of Heat-Treated Steels by Magnetic Barkhausen Noise Technique

GÜR C. H.

TMS Annual Meeting and Exhibition / Symposium on Characterization of Minerals, Metals, and Materials, California, United States Of America, 01 January 2017, pp.371-376

New possibilities on training of NDT personnel

YELBAY H. İ., GÜR C. H., Yilmaz E.

14th International Conference of the Slovenian Society for Non-Destructive Testing: Application of Contemporary Non-Destructive Testing in Engineering, St. Bernardin/Portoroz, Slovenia, 4 - 06 September 2017, pp.219-222

Effect of Microstructure on Fracture Toughness of Coarse Grain Heat Aff ected Zone in As Welded X70M Steel

CAGIRICI M., TOSUN U., GÜR C. H.

18th International Metallurgy and Materials Congress, İstanbul, Turkey, 29 September - 01 October 2016, pp.928-931

Measurement of Residual Stresses in the Carburized Steels by Non Destructive Techniques

HIZLI H., KALELI T., GÜR C. H.

18th International Metallurgy and Materials Congress, İstanbul, Turkey, 29 September - 01 October 2016, pp.439-442

Non Destructive Determination of Residual Stresses in the Spiral Submerged Arc Welded Steel Pipes

KALELI T., GÜR C. H.

19th World Congress for Non-Destructive Testing, Munich, Germany, 13 - 17 June 2016

PoD Analysis of Phased Array and Conventional Ultrasonic Techniques

YALCIN M., YELBAY H. İ., GÜR C. H.

19th World Congress for Non-Destructive Testing, Munich, Germany, 13 - 17 June 2016

Non destructive Monitoring of Variations in Microstructure and Residual Stress in the Carburized Steel

HIZLI H., DAVUT K., ŞİMŞİR C., GÜR C. H.

19th World Congress for Non-Destructive Testing, Munich, Germany, 13 - 17 June 2016

Nondestructive Monitoring of the Variations in Microstructure and Residual Stress in the Carburized Steels

Hızlı H., DAVUT K., ŞİMŞİR C., GÜR C. H.

19th World Conference on Non-Destructive Testing, Munich, Germany, 13 - 17 June 2016

Sementasyon İşlemi Uygulanan Çeliklerdeki Kalıntı Gerilmelerin Tahribatsız Tekniklerle Ölçülmesi

HIZLI H., KALELI T., GÜR C. H.

5. ISIL ISLEM SEMPOZYUMU, İstanbul, Turkey, 2 - 03 June 2016, pp.59-66

S235 Çeliğinin MAG Köşe Kaynağında Farklı Sabitleme Noktalarına Bağlı Gelişen Çarpılma Eğilimlerinin Sonlu Elemanlar Yöntemi ile Tahmin Edilmesi

BEDİR E., BATIGÜN C., GÜR C. H.

9. Ulusal Kaynak Teknolojisi Kongresi, Ankara, Turkey, 20 - 21 November 2015, pp.191-207

Demiryolu raylarında Kalıntı Gerilimlerin Manyetik Barkhausen Gürültüsü Yöntemi ile Ölçülmesi

YELBAY H. İ., GÜR C. H.

9. Ulusal Kaynak Teknolojisi Kongresi, Ankara, Turkey, 20 - 21 November 2015, pp.301-307

Applicability of Micromagnetic and Ultrasonic Methods for Non Destructive Monitoring of Microstructure Variations in Steels Induced by Heat Treatment

GÜR C. H.

5th International Conference on Distortion Engineering, Bremen, Germany, 23 - 25 September 2015, pp.329-334

Nondestructive Monitoring of the Effects of Carburizing on 19CrNi5H Steel by Magnetic Barkhausen Noise Method

HIZLI H., GÜR C. H.

11th International Conference on Barkhausen Noise & Micromagnetic Testing, Kuşadası, Turkey, 18 - 20 June 2015

Monitoring the Effects of Subsequent Weld Runs on Surface Residual Stresses in Steel Plates by Magnetic Barkhausen Noise Method

ERİAN G., BATIGÜN C., ÇAM İ., GÜR C. H.

11th International Conference on Barkhausen Noise & Micromagnetic Testing, Kuşadası, Turkey, 18 - 20 June 2015

Measuring the Surface Residual Stresses in Shot Peened Steel Components by Magnetic Barkhausen Noise Method 11th Int Conf on Barkhausen Noise Micromagnetic Testing

GÜR C. H., Savaş S.

11th International Conference on Barkhausen Noise & Micromagnetic Testing, Kuşadası, Turkey, 18 - 20 June 2015

NONDESTRUCTIVE MONITORING OF VARIATIONS OF RESIDUAL STRESSES IN STEEL WELDMENTS BY MAGNETIC BARKHAUSEN NOISE METHOD

GÜR C. H., Erian G., BATIGÜN C., ÇAM İ.

ASME Pressure Vessels and Piping Conference (PVP-2013), Paris, France, 14 - 18 July 2013

Investigating the effects of quenching and tempering on steel microstructures by Magnetic Barkhausen Noise method

GÜR C. H., ÇAM İ.

6th International Quenching and Control of Distortion Conference: Quenching Control and Distortion, Including the 4th International Distortion Engineering Conference, Chicago, IL, United States Of America, 9 - 13 September 2012, pp.258-265

Investigating the effect of number of weld passes on the residual stress state of steel plates by micro magnetic method

Erian G., Batıgün C., ÇAM İ., GÜR C. H.

16th International Metallurgy and Materials Congress, At Istanbul, Volume: CD Proceedings, pp. 903-911, İstanbul, Turkey, 13 - 15 September 2012, pp.903-911

Effect of weld repair on microstructure and mechanical properties of API 5LX65 steel

BATIGÜN C., Garipova N., Demircan M., GÜR C. H.

International Conference on Advances in Welding Science and Technology for Construction, Energy and Transportation, AWST 2010, held in Conjunction with the 63rd Annual Assembly of the International Institute of Welding, IIW 2010, İstanbul, Turkey, 11 - 17 July 2010, pp.643-649

Metallurgical influence on quench distortion of SAE 52100 long cylinders

Maradit B. P., Simsir C., Lubben T., Gur C. H.

65th ABM International Congress, 18th IFHTSE Congress and 1st TMS/ABM International Materials Congress 2010, Rio de Janeiro, Brazil, 26 - 30 July 2010, vol.6, pp.4833-4841

PREDICTION OF SURFACE RESIDUAL STRESSES IN BUTT-WELDED STEEL PLATES BY MAGNETIC BARKHAUSEN NOISE ANALYSIS

GÜR C. H., YELBAY H. İ., ÇAM İ.

10th European Conference on Non-Destructive Testing (ECNDT 2010), Moscow, Russia, 7 - 11 June 2010, pp.31-36

Kaynakların Tahribatsız Muayenesi

KOLANKAYA O., DOYUM A. B., YELBAY H. İ., GÜR C. H.

Proc. 1st National Welding Technology Conference, 11 June 2009, pp.698-709

Microstructural characterization of sic reinforced aluminum matrix composites

Makszimus A., Pieczonka T., GÜR C. H., Tan E., Gacsi Z.

European International Powder Metallurgy Congress and Exhibition, Euro PM 2009, Copenhagen, Denmark, 12 - 14 October 2009, vol.3

A new framework for simulation of heat treatments

ŞİMŞİR C., GÜR C. H.

2nd International Conference on Distortion Engineering (IDE2008), Bremen, Germany, 17 - 19 September 2008, pp.471-479

Investigation of the microstructure and hardness of SiCP reinforced aluminum matrix composites

Makszimus A., Gácsi Z., GÜR C. H.

6th Hungarian Conference on Materials Science, Siofok, Hungary, 14 - 16 October 2007, vol.589, pp.239-244

Effect of ECAP and post-aging processes on 2024 aluminum alloy

Saraloglu E., Tan E., GÜR C. H.

12th International Conference on Metal Forming, METAL FORMING 2008, Krakow, Poland, 21 - 24 September 2008, vol.79, pp.467-471

Finite element investigation of the effect of hardening behavior of alloys on equal channel angular pressing performance

Karpuz P., Simsir C., GÜR C. H., Kim H. S.

4th International Conference on Nanomaterials by Severe Plastic Deformation, Goslar, Germany, 18 - 22 August 2008, pp.1021-1026

INVESTIGATION OF THE MICROSTRUCTURE AND HARDNESS OF SiCP REINFORCED ALUMINUM MATRIX COMPOSITES

MAKSZIMUS A., GACSI Z., Guer C. H.

6th Hungarian Conference on Materials, Science, Testing and Informatics, Siofok, Hungary, 14 - 16 October 2007, vol.589, pp.239-240

Microstructure characterization of SiCp-reinforced aluminum matrix composites by newly developed computer-based algorithms

Kretz F., Gacsi Z., GÜR C. H.

2006 Powder Metallurgy World Congress and Exhibition, PM 2006, Busan, South Korea, 24 - 28 September 2006, pp.909-912

Investigation of microstructure inhomogeneity in SiCp-reinforced aluminum matrix composites

Gacsi Z., GÜR C. H., Makszimus A., Pieczonka T.

2006 Powder Metallurgy World Congress and Exhibition, PM 2006, Busan, South Korea, 24 - 28 September 2006, pp.901-904

Microstructure characterization of SiCp-reinforced aluminum matrix composites by newly developed computer-based algorithms

Kretz F., Gacsi Z., GÜR C. H.

Power Metallurgy World Congress and Exhibition 2006, Busan, South Korea, 24 - 28 September 2006, pp.909-910

Ötektoidaltı çeliklerde Ae1-Ae3 sıcaklık aralığında östenit/ferrit faz dönüşümü için kinetik model

GÜR C. H., KOLANKAYA O.

CD Proc of 12th Int Metallurgy-Materials Congress, 28 September 2005, pp.1777-1783

FE Simulation of Steel Quenching to Investigate Residual Stresses and Distortion

ŞİMŞİR C., GÜR C. H.

1st International Conference on Distortion Engineering (IDE2005), Bremen, Germany, 14 - 16 September 2005, pp.407-414

Comparison of the deep drawability of aluminum and steel using numerical simulation experiments

Sonmez C., Tekkaya A., Gur C.

6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Michigan, United States Of America, 15 - 19 August 2005, vol.778, pp.119-124