Yayınlar & Eserler

Yayın Ağı
Makaleler 22
Tümü (22)
SCI-E, SSCI, AHCI (19)
SCI-E, SSCI, AHCI, ESCI (20)
ESCI (1)
Scopus (21)
Diğer Yayınlar (1)

1. Surrogate-Based Deep Reinforcement Learning for Active Flow Control on Slender Bodies

Arslan K., ÖZGEN S.
JOURNAL OF SPACECRAFT AND ROCKETS , 2025 (SCI-Expanded, Scopus) identifier

2. Modeling of Supercooled Large Droplet Physics in Aircraft Icing

ÖZGEN S., SARIBEL E. B.
Aerospace , cilt.11, sa.10, 2024 (SCI-Expanded, Scopus) identifier identifier

3. Effect of blade contamination on power production of wind turbines

Özgen S., Sarıbel E. B., Yaman A. R.
JOURNAL OF PHYSICS: CONFERENCE SERIES , cilt.2265, ss.1-10, 2022 (Hakemli Dergi) Creative Commons License

4. PREDICTION OF ICE ACCRETION SHAPES ON AIRCRAFT WINGS USING OPEN-SOURCE SOFTWARE

Edeeb S., Akay H. U., ÖZGEN S.
ARPN Journal of Engineering and Applied Sciences , cilt.16, sa.20, ss.2043-2053, 2021 (Scopus) identifier

5. Improvement in the spring analogy mesh deformation method through the cell-center concept

Yang Y., Özgen S., Kim H.
Aerospace Science and Technology , cilt.115, 2021 (SCI-Expanded) identifier identifier

6. Aerodynamic validation studies on the performance analysis of iced wind turbine blades

YIRTICI Ö., Cengiz K., ÖZGEN S., TUNCER İ. H.
COMPUTERS & FLUIDS , cilt.192, 2019 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

7. Predictions of ice formations on wind turbine blades and power production losses due to icing

YIRTICI Ö., ÖZGEN S., TUNCER İ. H.
WIND ENERGY , cilt.22, sa.7, ss.945-958, 2019 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

8. In-flight ice accretion simulation in mixed-phase conditions

Ayan E., ÖZGEN S.
AERONAUTICAL JOURNAL , cilt.122, sa.1249, ss.409-441, 2018 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

9. Morphing wing optimization for steady level flight

Korpe D. S., ÖZGEN S.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING , cilt.231, sa.13, ss.2317-2330, 2017 (SCI-Expanded, Scopus) identifier identifier

10. Structural and aerodynamic analyses of a hybrid trailing edge control surface of a fully morphing wing

Gürses E., Tunçöz I. O., Yang Y., Arslan P., Kalkan U., Tıraş H., et al.
JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES , cilt.28, ss.979-991, 2017 (SCI-Expanded, Scopus) identifier identifier

11. Decamber Morphing Concepts by Using a Hybrid Trailing Edge Control Surface

Yaman Y., Tuncoz I. O., Yang Y., Arslan P., Kalkan U., Tiras H., et al.
AEROSPACE , cilt.2, ss.482-504, 2015 (ESCI, Scopus) identifier identifier

12. Investigation of the Linear Stability Problem of Electrified Jets, Inviscid Analysis

ÖZGEN S., UZOL O.
JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME , cilt.134, sa.9, 2012 (SCI-Expanded, Scopus) Creative Commons License identifier identifier

13. In-flight Ice formation simulation on finite wings and air intakes

ÖZGEN S., Canibek M.
AERONAUTICAL JOURNAL , cilt.116, sa.1178, ss.337-362, 2012 (SCI-Expanded, Scopus) identifier

14. Crosslinked DADMAC polymers as cationic super absorbents

Korpe S., Erdogan B., BAYRAM G., ÖZGEN S., ULUDAĞ Y., Bicak N.
REACTIVE & FUNCTIONAL POLYMERS , cilt.69, sa.9, ss.660-665, 2009 (SCI-Expanded, Scopus) identifier identifier

15. Ice accretion simulation on multi-element airfoils using extended Messinger model

ÖZGEN S., Canibek M.
HEAT AND MASS TRANSFER , cilt.45, sa.3, ss.305-322, 2009 (SCI-Expanded, Scopus) identifier identifier

16. Coalescence of Tollmien-Schlichting and interfacial modes of instability in two-fluid flows

Ozgena S.
PHYSICS OF FLUIDS , cilt.20, sa.4, 2008 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

17. Linear stability analysis in compressible, flat-plate boundary-layers

ÖZGEN S., Kircali S. A.
THEORETICAL AND COMPUTATIONAL FLUID DYNAMICS , cilt.22, sa.1, ss.1-20, 2008 (SCI-Expanded, Scopus) identifier identifier

18. Heat transfer effects on the stability of low speed plane Couette-Poiseuille flow

Oezgen S., Dursunkaya Z., Ebrinc A. A.
HEAT AND MASS TRANSFER , cilt.43, sa.12, ss.1317-1328, 2007 (SCI-Expanded, Scopus) identifier identifier

19. Effect of heat transfer on stability and transition characteristics of boundary-layers

Ozgen S.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , cilt.47, sa.22, ss.4697-4712, 2004 (SCI-Expanded, Scopus) identifier identifier

20. Experimental study of wave characteristics on a thin layer of de/anti-icing fluid

Ozgen S., Carbonaro M., Sarma G.
PHYSICS OF FLUIDS , cilt.14, sa.10, ss.3391-3402, 2002 (SCI-Expanded, Scopus) identifier identifier

21. Two-fluid boundary layer stability

Ozgen S., Degrez G., Sarma G.
PHYSICS OF FLUIDS , cilt.10, sa.11, ss.2746-2757, 1998 (SCI-Expanded, Scopus) identifier identifier

22. Stability of parallel non-newtonian flows

Ozgen S., Sarma G.
ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK , cilt.77, 1997 (SCI-Expanded, Scopus) identifier
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 46

1. Thermal Modelling of an Aero Engine Anti-Ice System and the Investigation of Water Layer Effects

Akça B. U., Özgen S.
International Society of Air Breathing Engines - ISABE 24, Toulouse, Fransa, 23 - 27 Eylül 2024, ss.1-17, (Tam Metin Bildiri)

2. AEROACOUSTICS OF OSCILLATING AIRFOIL UNDER ICING CONDITIONS

Güngör O., Özgen S., Özyörük Y.
50th European Rotorcraft Forum, Marseille, Fransa, 10 - 12 Eylül 2024, ss.1-9, (Tam Metin Bildiri) Creative Commons License

3. Constructing Steady State Shock Solution Scheme for Transonic Buffet Investigation

Bıçakçı Ertem A., Özgen S.
13. Uluslararası Bilimsel Çalışmalar Kongresi , 27 - 28 Şubat 2024, ss.410-417, (Tam Metin Bildiri)

4. Airfoil Icing Prediction with Improved Roughness Model

ÖZGEN S., Sarlbel E. B.
2024 Science of Making Torque from Wind, TORQUE 2024, Florence, İtalya, 29 - 31 Mayıs 2024, cilt.2767, (Tam Metin Bildiri) identifier identifier

5. Screening Design of a Transport Aircraft Wing Using Design of Experiments Method

Kavak C., ÖZGEN S.
12th ANKARA INTERNATIONAL AEROSPACE CONFERENCE, Ankara, Türkiye, 13 Eylül 2023, (Tam Metin Bildiri)

6. DEEP REINFORCEMENT LEARNING BASED ACTIVE FLOW CONTROL FOR AN IMPERFECT CYLINDER

Aslan K., ÖZGEN S., Demiral E.
12th ANKARA INTERNATIONAL AEROSPACE CONFERENCE, Ankara, Türkiye, 13 Eylül 2023, (Tam Metin Bildiri)

7. TRAJECTORY OPTIMIZATION OF A LIFTING RE-ENTRY VEHICLE

Özgen S., Kaçmaz S.
12th ANKARA INTERNATIONAL AEROSPACE CONFERENCE, Ankara, Türkiye, 13 Eylül 2023, (Tam Metin Bildiri) Creative Commons License

8. SUPERSONIC BOUNDARY-LAYER STABILITY ANALYSIS FOR SHARP CONES AT ZERO ANGLE-OF-ATTACK

Günday Y., Özgen S.
12th ANKARA INTERNATIONAL AEROSPACE CONFERENCE, Ankara, Türkiye, 13 Eylül 2023, (Tam Metin Bildiri) Creative Commons License

9. Investigation of Water Impingement on Aero-Components by Lagrangian and Eulerian Approach

Görgülü I., Özgen S.
SAE 2023 International Conference on Icing of Aircraft, Engines, and Structures, ICE 2023, Vienna, Avusturya, 20 - 23 Haziran 2023, (Tam Metin Bildiri) Creative Commons License identifier

10. Icing Environment Comparisons for the Distinct Parts of Jet Aircraft

Akbal O., Ayan E., Murat C., Özgen S.
SAE 2023 International Conference on Icing of Aircraft, Engines, and Structures, ICE 2023, Vienna, Avusturya, 20 - 23 Haziran 2023, (Tam Metin Bildiri) Creative Commons License identifier

11. In Flight Ice Shape Prediction with Data Fit Surrogate Models

Akbal O., Ayan E., Murat C., Özgen S.
SAE 2023 International Conference on Icing of Aircraft, Engines, and Structures, ICE 2023, Vienna, Avusturya, 20 - 23 Haziran 2023, (Tam Metin Bildiri) Creative Commons License identifier

12. Aeroelastic Analysis of DTU 10 MW Reference Wind Turbine Under Icing Conditions

Kepez D., Uzol O., Özgen S.
Wind Energy Science Conference 2023, Glasgow, İngiltere, 23 Mayıs 2023, (Özet Bildiri)

13. Numerical Ice Accretion Simulations with Improved Roughness and Water State Models

SARIBEL E. B., ÖZGEN S.
Wind Energy Science Conference 2023, Glasgow, İngiltere, 23 Mayıs 2023, (Özet Bildiri)

14. Transonic Buffet Investigation on NACA 0012 Airfoil

Algül K. G., ÖZGEN S.
12th ANKARA INTERNATIONAL AEROSPACE CONFERENCE, Ankara, Türkiye, 08 Eylül 2021, (Tam Metin Bildiri)

15. Boundary-Layer Stability in Supersonic Flows

ÖZGEN S., KOYUNCUOĞLU H. U.
12th ANKARA INTERNATIONAL AEROSPACE CONFERENCE, Ankara, Türkiye, 08 Eylül 2021, (Tam Metin Bildiri)

16. Scaling for Icing Wind Tunnel Tests and Validation with Numerical Simulations

Özbek Yanmaz G., ÖZGEN S.
8TH EUROPEAN CONFERENCE FOR AERONAUTICS AND SPACE SCIENCES (EUCASS), Madrid, İspanya, 1 - 04 Temmuz 2019, (Tam Metin Bildiri)

17. Numerical simulation of ice accretion and consequent power loss estimation in wind turbine blades

ÖZGEN S., akyıldız e., berker a. m., çakmak a.
8TH EUROPEAN CONFERENCE FOR AERONAUTICS AND SPACE SCIENCES (EUCASS), Madrid, İspanya, 1 - 04 Temmuz 2019, (Tam Metin Bildiri)

18. Sizing and Optimization of the Horizontal Tail of a Jet Trainer

karatoprak s., ÖZGEN S.
8TH EUROPEAN CONFERENCE FOR AERONAUTICS AND SPACE SCIENCES (EUCASS), Madrid, İspanya, 1 - 04 Temmuz 2019, (Tam Metin Bildiri)

19. Aerodynamic Design and Control of Tandem Wing UAV

Kaya T., ÖZGEN S.
AIAA Aviation Forum, Dallas, Amerika Birleşik Devletleri, 17 - 21 Haziran 2019, (Tam Metin Bildiri) identifier

20. Experiences with Parallel Ice Accretion Simulations of Airplane Wings Using OpenFoam

AKAY H. U., Edeeb S. H., ÖZGEN S.
31st International Conference on Parallel Computational Fluid Dynamics, Antalya, Türkiye, 14 - 17 Mayıs 2019, (Tam Metin Bildiri)

21. Wind turbine power production losses due to ice accretion on turbine blades

Yirtici O., Sevine T., ÖZGEN S., TUNCER İ. H.
12th AIAA/ASME Joint Thermophysics and Heat Transfer Conference, 2018, [state] GA, Amerika Birleşik Devletleri, 25 - 29 Haziran 2018, (Tam Metin Bildiri) identifier

22. Multi-objective morphing wing optimization for an Unmanned Air Vehicle

KÖRPE D. S., ÖZGEN S.
7th European Conference for Aeronautics and Spaice Sciences, Milan, İtalya, 3 - 06 Temmuz 2017, (Tam Metin Bildiri)

23. Icing Simulations on Engine Intake

Uğur N., ÖZGEN S., Görgülü İ., Tatar V.
7th European Conference for Aeronautics and Space Sciences, Milan, İtalya, 3 - 06 Temmuz 2017, (Tam Metin Bildiri)

24. Conceptual Design of a Hybrid (Turbofan/solar) Powered UAV

Mermer E., ÖZGEN S.
7th European Conference for Aeronautics and Space Sciences, Milan, İtalya, 3 - 06 Temmuz 2017, (Tam Metin Bildiri)

25. In-Flight Mixed Phase Ice Accretion Prediction on Finite Wings with TAICE-3D

Ayan E., ÖZGEN S.
7th European Conference for Aeronautics and Space Sciences, Milan, İtalya, 3 - 06 Temmuz 2017, (Tam Metin Bildiri)

26. Aerodynamic Shape Optimization of Wind TurbineBlades for Reducing Power Production Losses due toIce Accretion

YIRTICI Ö., TUNCER İ. H., ÖZGEN S.
AIAA Scitech Conference, Dallas, Amerika Birleşik Devletleri, 9 - 13 Ocak 2017, (Tam Metin Bildiri)

27. Mathematical modelling for wave drag optimization and design of high-speed aircrafts

Citak C., ÖZGEN S., Weber G. W.
3rd International Conference on Dynamics, Games and Science, DGS 2014, Porto, Portekiz, 17 - 21 Şubat 2014, cilt.195, ss.109-132, (Tam Metin Bildiri) Sürdürülebilir Kalkınma identifier

28. Modification of the extended messinger model for mixed phase icing and industrial applications with TAICE

Ayan E., ÖZGEN S.
9th AIAA Atmospheric and Space Environments Conference, 2017, Colorado, Amerika Birleşik Devletleri, 5 - 09 Haziran 2017, (Tam Metin Bildiri) identifier

29. Ice Accretion Prediction on Wind Turbines and Consequent Power Losses

YIRTICI Ö., TUNCER İ. H., ÖZGEN S.
Conference on Science of Making Torque from Wind (TORQUE), Munich, Almanya, 5 - 07 Ekim 2016, cilt.753, (Tam Metin Bildiri) Creative Commons License Sürdürülebilir Kalkınma identifier identifier

30. Mixed phase ice accretion prediction with TAICE

Ayan E., ÖZGEN S., Canıbek M.
8th AIAA Atmospheric and Space Environments Conference, 2016, Washington, Amerika Birleşik Devletleri, 13 - 17 Haziran 2016, (Tam Metin Bildiri) identifier

31. Hybrid morphing trailing edge designed for camber change of the control surface

Tunçöz İ. O., Yang Y., Gürses E., Şahin M., Özgen S., Yaman Y.
24th AIAA/AHS Adaptive Structures Conference, 2016, California, Amerika Birleşik Devletleri, 4 - 08 Ocak 2016, (Tam Metin Bildiri) identifier

32. MDAO for aerodynamic assessment of a morphed wing for the loiter segment of a UAV flight mission

Yang Y., ÖZGEN S., YAMAN Y., Ciarella A., Hahn M., Beaverstock C. S., et al.
24th AIAA/AHS Adaptive Structures Conference, 2016, California, Amerika Birleşik Devletleri, 4 - 08 Ocak 2016, (Tam Metin Bildiri) identifier

33. Ice Accretion Prediction on Engine Nacelles in Liquid Phase Clouds

ÖZGEN S., Uğur N., Görgülü İ., Tatar V.
SAE 2015 International Conference on Icing of Aircraft Engines and Structures, Prag, Çek Cumhuriyeti, 22 - 25 Haziran 2015, (Tam Metin Bildiri)

34. ICE ACCRETION PREDICTION ON HORIZONTAL AXIS WIND TURBINE BLADES

YIRTICI Ö., ÖZGEN S., TUNCER İ. H.
EAWE 2015, 22 - 25 Eylül 2015

35. Ice Accretion Simulations on Airfoils

ÖZGEN S., Uğur N., Görgülü İ., Tatar V.
6th European Conference for Aeronautics and Space Sciences (EUCASS 2015), Krakov, Polonya, 29 Haziran - 03 Temmuz 2015, (Tam Metin Bildiri)

36. Morphing Wing Optimization for Steady Level Flight

KÖRPE D. S., ÖZGEN S.
6TH EUROPEAN CONFERENCE FOR AERONAUTICS AND SPACE SCIENCES (EUCASS), Krakov, Polonya, 29 Haziran - 03 Temmuz 2015, (Tam Metin Bildiri)

37. Comparison of Various Spring Analogy Mesh Deformation Techniques in 2 D Airfoil Design Optimization

Yang Y., ÖZGEN S.
6TH EUROPEAN CONFERENCE FOR AERONAUTICS AND SPACE SCIENCES (EUCASS), Krakov, Polonya, 29 Haziran - 03 Temmuz 2015, (Tam Metin Bildiri)

38. Measurement of Lift and Drag Force in Morphing Wings Using High Precision Load Cell

Özkanaktı H., KÖRPE D. S., ÖZGEN S.
6th European Conference for Aeronautics and Space Sciences (EUCASS 2015), Krakov, 29 Haziran - 03 Temmuz 2015, (Tam Metin Bildiri)

39. A Multi Fidelity Multi Disciplinary Analysis Optimization Framework for the Design of Morphing UAV Wings

Ciarella A., Christos T., Hahn M., Werter N. P., De Breuker R., Beaverstock C., et al.
45th AIAA Fluid Dynamics Conference, Dallas, Amerika Birleşik Devletleri, 22 - 26 Haziran 2015, (Tam Metin Bildiri)

40. Prediction of Ice Crystal Accretion with TAICE

Ayan E., ÖZGEN S., Murat C., Tarhan E.
SAE International Conference on Icing of Aircraft, Engines, and Structures, ICE 2015, Prague, Çek Cumhuriyeti, 22 - 25 Haziran 2015, (Tam Metin Bildiri) identifier

41. A Hybrid Trailing Edge Control Surface Capable of Camber and Decamber Morphing

İlhan Ozan T., Yosheph Y., Gürses E., Şahin M., Özgen S., Yaman Y.
SMART2015, 7th ECCOMAS Thematic Conference on Smart Structures and Materials, Ponta-Delgada, Portekiz, 3 - 06 Haziran 2015, (Tam Metin Bildiri)

42. Implementation of ball-center spring analogy mesh deformation technique with CFD design optimization

Yang Y., ÖZGEN S.
22nd AIAA Computational Fluid Dynamics Conference, 2015, Texas, Amerika Birleşik Devletleri, 22 - 26 Haziran 2015, (Tam Metin Bildiri) identifier

43. Structural Analysis of an Unconventional Hybrid Control Surface of a Morphing Wing

Arslan P., Uğur K., Harun T., İlhan Ozan T., Yosheph Y., Gürses E., et al.
ICAST2014: 25th International Conference on Adaptive Structures and Technologies, The Hague, Hollanda, 6 - 08 Ekim 2014, (Tam Metin Bildiri) identifier

44. A Hybrid Trailing Edge Control Surface Concept

Arslan P., Uğur K., Harun T., İlhan Ozan T., Yosheph Y., Gürses E., et al.
DeMEASS-VI, 6th Conference for Design, Modelling and Experiments of Advanced Structures and Systems, The Hague, Hollanda, 25 - 28 Mayıs 2014, (Tam Metin Bildiri)

45. Evaluation of a Camber Morphing Concept Based on Controlled Flexibility

GÜÇLÜ S., EVREN S., ERDOĞAN TOLGA İ., ŞAHİN M., ÖZGEN S., YAMAN Y.
IFASD2009, International Forum on Aeroelasticity and Structural Dynamics 2009, SEATTLE, Amerika Birleşik Devletleri, 21 - 25 Haziran 2009, (Tam Metin Bildiri)

46. High Speed Couette—Poiseuille Flow Stability in Reverse Flow Conditions

Ebrinç A. A., ÖZGEN S., DURSUNKAYA Z.
4th IASME/WSEAS International Conference on Fluid Mechanics and Aerodynamics, Girit, Yunanistan, 21 - 23 Ağustos 2006, (Tam Metin Bildiri)
Kitaplar 2

1. Comparison of Various Spring Analogy Related Mesh Deformation Techniques in Two-Dimensional Airfoil Design Optimization

ÖZGEN S., Yang Y.
EUCASS Progress in Flight Physics Vol. 9, Doyle Knight, Yevgeniy Bondar, Igor Lipatov, Phillippe Reijasse, Editör, EDP Sciences , Moskva, ss.337-352, 2017

2. In-flight Icing Simulations on Airfoils

UĞUR N., ÖZGEN S., GÖRGÜLÜ İ., TATAR V.
Sustainable Aviation, T. Hikmet Karakoç, Can Özgür Çolpan, M. barış Özerdem, Önder Altuntaş, M. Ziya Söğüt, Emin Açıkkalp , Editör, Springer, ss.279-289, 2016