Prof. SERKAN ÖZGEN

Publication Network

Articles 22

1. Surrogate-Based Deep Reinforcement Learning for Active Flow Control on Slender Bodies

Arslan K., Özgen S.

JOURNAL OF SPACECRAFT AND ROCKETS , vol.62, no.6, pp.2047-2059, 2025 (SCI-Expanded, Scopus)

2. Modeling of Supercooled Large Droplet Physics in Aircraft Icing

ÖZGEN S., SARIBEL E. B.

Aerospace , vol.11, no.10, 2024 (SCI-Expanded, Scopus)

3. Effect of blade contamination on power production of wind turbines

Özgen S., Sarıbel E. B., Yaman A. R.

JOURNAL OF PHYSICS: CONFERENCE SERIES , vol.2265, pp.1-10, 2022 (Peer-Reviewed Journal)

4. PREDICTION OF ICE ACCRETION SHAPES ON AIRCRAFT WINGS USING OPEN-SOURCE SOFTWARE

Edeeb S., Akay H. U., ÖZGEN S.

ARPN Journal of Engineering and Applied Sciences , vol.16, no.20, pp.2043-2053, 2021 (Scopus)

5. Improvement in the spring analogy mesh deformation method through the cell-center concept

Yang Y., Özgen S., Kim H.

Aerospace Science and Technology , vol.115, 2021 (SCI-Expanded)

6. Aerodynamic validation studies on the performance analysis of iced wind turbine blades

YIRTICI Ö., Cengiz K., ÖZGEN S., TUNCER İ. H.

COMPUTERS & FLUIDS , vol.192, 2019 (SCI-Expanded, Scopus) Sustainable Development

7. Predictions of ice formations on wind turbine blades and power production losses due to icing

YIRTICI Ö., ÖZGEN S., TUNCER İ. H.

WIND ENERGY , vol.22, no.7, pp.945-958, 2019 (SCI-Expanded, Scopus) Sustainable Development

8. In-flight ice accretion simulation in mixed-phase conditions

Ayan E., ÖZGEN S.

AERONAUTICAL JOURNAL , vol.122, no.1249, pp.409-441, 2018 (SCI-Expanded, Scopus) Sustainable Development

9. Morphing wing optimization for steady level flight

Korpe D. S., ÖZGEN S.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING , vol.231, no.13, pp.2317-2330, 2017 (SCI-Expanded, Scopus)

10. Structural and aerodynamic analyses of a hybrid trailing edge control surface of a fully morphing wing

Gürses E., Tunçöz I. O., Yang Y., Arslan P., Kalkan U., Tıraş H., et al.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES , vol.28, pp.979-991, 2017 (SCI-Expanded, Scopus)

11. Decamber Morphing Concepts by Using a Hybrid Trailing Edge Control Surface

Yaman Y., Tuncoz I. O., Yang Y., Arslan P., Kalkan U., Tiras H., et al.

AEROSPACE , vol.2, pp.482-504, 2015 (ESCI, Scopus)

12. Investigation of the Linear Stability Problem of Electrified Jets, Inviscid Analysis

ÖZGEN S., UZOL O.

JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME , vol.134, no.9, 2012 (SCI-Expanded, Scopus)

13. In-flight Ice formation simulation on finite wings and air intakes

ÖZGEN S., Canibek M.

AERONAUTICAL JOURNAL , vol.116, no.1178, pp.337-362, 2012 (SCI-Expanded, Scopus)

14. Crosslinked DADMAC polymers as cationic super absorbents

Korpe S., Erdogan B., BAYRAM G., ÖZGEN S., ULUDAĞ Y., Bicak N.

REACTIVE & FUNCTIONAL POLYMERS , vol.69, no.9, pp.660-665, 2009 (SCI-Expanded, Scopus)

15. Ice accretion simulation on multi-element airfoils using extended Messinger model

ÖZGEN S., Canibek M.

HEAT AND MASS TRANSFER , vol.45, no.3, pp.305-322, 2009 (SCI-Expanded, Scopus)

16. Coalescence of Tollmien-Schlichting and interfacial modes of instability in two-fluid flows

Ozgena S.

PHYSICS OF FLUIDS , vol.20, no.4, 2008 (SCI-Expanded, Scopus) Sustainable Development

17. Linear stability analysis in compressible, flat-plate boundary-layers

ÖZGEN S., Kircali S. A.

THEORETICAL AND COMPUTATIONAL FLUID DYNAMICS , vol.22, no.1, pp.1-20, 2008 (SCI-Expanded, Scopus)

18. Heat transfer effects on the stability of low speed plane Couette-Poiseuille flow

Oezgen S., Dursunkaya Z., Ebrinc A. A.

HEAT AND MASS TRANSFER , vol.43, no.12, pp.1317-1328, 2007 (SCI-Expanded, Scopus)

19. Effect of heat transfer on stability and transition characteristics of boundary-layers

Ozgen S.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , vol.47, no.22, pp.4697-4712, 2004 (SCI-Expanded, Scopus)

20. Experimental study of wave characteristics on a thin layer of de/anti-icing fluid

Ozgen S., Carbonaro M., Sarma G.

PHYSICS OF FLUIDS , vol.14, no.10, pp.3391-3402, 2002 (SCI-Expanded, Scopus)

21. Two-fluid boundary layer stability

Ozgen S., Degrez G., Sarma G.

PHYSICS OF FLUIDS , vol.10, no.11, pp.2746-2757, 1998 (SCI-Expanded, Scopus)

22. Stability of parallel non-newtonian flows

Ozgen S., Sarma G.

ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK , vol.77, 1997 (SCI-Expanded, Scopus)

Papers Presented at Peer-Reviewed Scientific Conferences 46

1. Thermal Modelling of an Aero Engine Anti-Ice System and the Investigation of Water Layer Effects

Akça B. U., Özgen S.

International Society of Air Breathing Engines - ISABE 24, Toulouse, France, 23 - 27 September 2024, pp.1-17, (Full Text)

2. AEROACOUSTICS OF OSCILLATING AIRFOIL UNDER ICING CONDITIONS

Güngör O., Özgen S., Özyörük Y.

50th European Rotorcraft Forum, Marseille, France, 10 - 12 September 2024, pp.1-9, (Full Text)

3. Constructing Steady State Shock Solution Scheme for Transonic Buffet Investigation

Bıçakçı Ertem A., Özgen S.

13. Uluslararası Bilimsel Çalışmalar Kongresi , 27 - 28 February 2024, pp.410-417, (Full Text)

4. Airfoil Icing Prediction with Improved Roughness Model

ÖZGEN S., Sarlbel E. B.

2024 Science of Making Torque from Wind, TORQUE 2024, Florence, Italy, 29 - 31 May 2024, vol.2767, (Full Text)

5. SUPERSONIC BOUNDARY-LAYER STABILITY ANALYSIS FOR SHARP CONES AT ZERO ANGLE-OF-ATTACK

Günday Y., Özgen S.

12th ANKARA INTERNATIONAL AEROSPACE CONFERENCE, Ankara, Turkey, 13 September 2023, (Full Text)

6. DEEP REINFORCEMENT LEARNING BASED ACTIVE FLOW CONTROL FOR AN IMPERFECT CYLINDER

Aslan K., ÖZGEN S., Demiral E.

12th ANKARA INTERNATIONAL AEROSPACE CONFERENCE, Ankara, Turkey, 13 September 2023, (Full Text)

7. TRAJECTORY OPTIMIZATION OF A LIFTING RE-ENTRY VEHICLE

Özgen S., Kaçmaz S.

12th ANKARA INTERNATIONAL AEROSPACE CONFERENCE, Ankara, Turkey, 13 September 2023, (Full Text)

8. Screening Design of a Transport Aircraft Wing Using Design of Experiments Method

Kavak C., ÖZGEN S.

12th ANKARA INTERNATIONAL AEROSPACE CONFERENCE, Ankara, Turkey, 13 September 2023, (Full Text)

9. In Flight Ice Shape Prediction with Data Fit Surrogate Models

Akbal O., Ayan E., Murat C., Özgen S.

SAE 2023 International Conference on Icing of Aircraft, Engines, and Structures, ICE 2023, Vienna, Austria, 20 - 23 June 2023, (Full Text)

10. Investigation of Water Impingement on Aero-Components by Lagrangian and Eulerian Approach

Görgülü I., Özgen S.

SAE 2023 International Conference on Icing of Aircraft, Engines, and Structures, ICE 2023, Vienna, Austria, 20 - 23 June 2023, (Full Text)

11. Icing Environment Comparisons for the Distinct Parts of Jet Aircraft

Akbal O., Ayan E., Murat C., Özgen S.

SAE 2023 International Conference on Icing of Aircraft, Engines, and Structures, ICE 2023, Vienna, Austria, 20 - 23 June 2023, (Full Text)

12. Aeroelastic Analysis of DTU 10 MW Reference Wind Turbine Under Icing Conditions

Kepez D., Uzol O., Özgen S.

Wind Energy Science Conference 2023, Glasgow, England, 23 May 2023, (Summary Text)

13. Numerical Ice Accretion Simulations with Improved Roughness and Water State Models

SARIBEL E. B., ÖZGEN S.

Wind Energy Science Conference 2023, Glasgow, England, 23 May 2023, (Summary Text)

14. Transonic Buffet Investigation on NACA 0012 Airfoil

Algül K. G., ÖZGEN S.

12th ANKARA INTERNATIONAL AEROSPACE CONFERENCE, Ankara, Turkey, 08 September 2021, (Full Text)

15. Boundary-Layer Stability in Supersonic Flows

ÖZGEN S., KOYUNCUOĞLU H. U.

12th ANKARA INTERNATIONAL AEROSPACE CONFERENCE, Ankara, Turkey, 08 September 2021, (Full Text)

16. Scaling for Icing Wind Tunnel Tests and Validation with Numerical Simulations

Özbek Yanmaz G., ÖZGEN S.

8TH EUROPEAN CONFERENCE FOR AERONAUTICS AND SPACE SCIENCES (EUCASS), Madrid, Spain, 1 - 04 July 2019, (Full Text)

17. Sizing and Optimization of the Horizontal Tail of a Jet Trainer

karatoprak s., ÖZGEN S.

8TH EUROPEAN CONFERENCE FOR AERONAUTICS AND SPACE SCIENCES (EUCASS), Madrid, Spain, 1 - 04 July 2019, (Full Text)

18. Numerical simulation of ice accretion and consequent power loss estimation in wind turbine blades

ÖZGEN S., akyıldız e., berker a. m., çakmak a.

8TH EUROPEAN CONFERENCE FOR AERONAUTICS AND SPACE SCIENCES (EUCASS), Madrid, Spain, 1 - 04 July 2019, (Full Text)

19. Aerodynamic Design and Control of Tandem Wing UAV

Kaya T., ÖZGEN S.

AIAA Aviation Forum, Dallas, United States Of America, 17 - 21 June 2019, (Full Text)

20. Experiences with Parallel Ice Accretion Simulations of Airplane Wings Using OpenFoam

AKAY H. U., Edeeb S. H., ÖZGEN S.

31st International Conference on Parallel Computational Fluid Dynamics, Antalya, Turkey, 14 - 17 May 2019, (Full Text)

21. Wind turbine power production losses due to ice accretion on turbine blades

Yirtici O., Sevine T., ÖZGEN S., TUNCER İ. H.

12th AIAA/ASME Joint Thermophysics and Heat Transfer Conference, 2018, [state] GA, United States Of America, 25 - 29 June 2018, (Full Text)

22. In-Flight Mixed Phase Ice Accretion Prediction on Finite Wings with TAICE-3D

Ayan E., ÖZGEN S.

7th European Conference for Aeronautics and Space Sciences, Milan, Italy, 3 - 06 July 2017, (Full Text)

23. Multi-objective morphing wing optimization for an Unmanned Air Vehicle

KÖRPE D. S., ÖZGEN S.

7th European Conference for Aeronautics and Spaice Sciences, Milan, Italy, 3 - 06 July 2017, (Full Text)

24. Icing Simulations on Engine Intake

Uğur N., ÖZGEN S., Görgülü İ., Tatar V.

7th European Conference for Aeronautics and Space Sciences, Milan, Italy, 3 - 06 July 2017, (Full Text)

25. Conceptual Design of a Hybrid (Turbofan/solar) Powered UAV

Mermer E., ÖZGEN S.

7th European Conference for Aeronautics and Space Sciences, Milan, Italy, 3 - 06 July 2017, (Full Text)

26. Aerodynamic Shape Optimization of Wind TurbineBlades for Reducing Power Production Losses due toIce Accretion

YIRTICI Ö., TUNCER İ. H., ÖZGEN S.

AIAA Scitech Conference, Dallas, United States Of America, 9 - 13 January 2017, (Full Text)

27. Mathematical modelling for wave drag optimization and design of high-speed aircrafts

Citak C., ÖZGEN S., Weber G. W.

3rd International Conference on Dynamics, Games and Science, DGS 2014, Porto, Portugal, 17 - 21 February 2014, vol.195, pp.109-132, (Full Text) Sustainable Development

28. Modification of the extended messinger model for mixed phase icing and industrial applications with TAICE

Ayan E., ÖZGEN S.

9th AIAA Atmospheric and Space Environments Conference, 2017, Colorado, United States Of America, 5 - 09 June 2017, (Full Text)

29. Ice Accretion Prediction on Wind Turbines and Consequent Power Losses

YIRTICI Ö., TUNCER İ. H., ÖZGEN S.

Conference on Science of Making Torque from Wind (TORQUE), Munich, Germany, 5 - 07 October 2016, vol.753, (Full Text)

30. Mixed phase ice accretion prediction with TAICE

Ayan E., ÖZGEN S., Canıbek M.

8th AIAA Atmospheric and Space Environments Conference, 2016, Washington, United States Of America, 13 - 17 June 2016, (Full Text)

31. Hybrid morphing trailing edge designed for camber change of the control surface

Tunçöz İ. O., Yang Y., Gürses E., Şahin M., Özgen S., Yaman Y.

24th AIAA/AHS Adaptive Structures Conference, 2016, California, United States Of America, 4 - 08 January 2016, (Full Text)

32. MDAO for aerodynamic assessment of a morphed wing for the loiter segment of a UAV flight mission

Yang Y., ÖZGEN S., YAMAN Y., Ciarella A., Hahn M., Beaverstock C. S., et al.

24th AIAA/AHS Adaptive Structures Conference, 2016, California, United States Of America, 4 - 08 January 2016, (Full Text)

33. Ice Accretion Prediction on Engine Nacelles in Liquid Phase Clouds

ÖZGEN S., Uğur N., Görgülü İ., Tatar V.

SAE 2015 International Conference on Icing of Aircraft Engines and Structures, Prag, Czech Republic, 22 - 25 June 2015, (Full Text)

34. ICE ACCRETION PREDICTION ON HORIZONTAL AXIS WIND TURBINE BLADES

YIRTICI Ö., ÖZGEN S., TUNCER İ. H.

EAWE 2015, 22 - 25 September 2015

35. Ice Accretion Simulations on Airfoils

ÖZGEN S., Uğur N., Görgülü İ., Tatar V.

6th European Conference for Aeronautics and Space Sciences (EUCASS 2015), Krakov, Poland, 29 June - 03 July 2015, (Full Text)

36. Morphing Wing Optimization for Steady Level Flight

KÖRPE D. S., ÖZGEN S.

6TH EUROPEAN CONFERENCE FOR AERONAUTICS AND SPACE SCIENCES (EUCASS), Krakov, Poland, 29 June - 03 July 2015, (Full Text)

37. Measurement of Lift and Drag Force in Morphing Wings Using High Precision Load Cell

Özkanaktı H., KÖRPE D. S., ÖZGEN S.

6th European Conference for Aeronautics and Space Sciences (EUCASS 2015), Krakov, 29 June - 03 July 2015, (Full Text)

38. Comparison of Various Spring Analogy Mesh Deformation Techniques in 2 D Airfoil Design Optimization

Yang Y., ÖZGEN S.

6TH EUROPEAN CONFERENCE FOR AERONAUTICS AND SPACE SCIENCES (EUCASS), Krakov, Poland, 29 June - 03 July 2015, (Full Text)

39. A Multi Fidelity Multi Disciplinary Analysis Optimization Framework for the Design of Morphing UAV Wings

Ciarella A., Christos T., Hahn M., Werter N. P., De Breuker R., Beaverstock C., et al.

45th AIAA Fluid Dynamics Conference, Dallas, United States Of America, 22 - 26 June 2015, (Full Text)

40. Prediction of Ice Crystal Accretion with TAICE

Ayan E., ÖZGEN S., Murat C., Tarhan E.

SAE International Conference on Icing of Aircraft, Engines, and Structures, ICE 2015, Prague, Czech Republic, 22 - 25 June 2015, (Full Text)

41. A Hybrid Trailing Edge Control Surface Capable of Camber and Decamber Morphing

İlhan Ozan T., Yosheph Y., Gürses E., Şahin M., Özgen S., Yaman Y.

SMART2015, 7th ECCOMAS Thematic Conference on Smart Structures and Materials, Ponta-Delgada, Portugal, 3 - 06 June 2015, (Full Text)

42. Implementation of ball-center spring analogy mesh deformation technique with CFD design optimization

Yang Y., ÖZGEN S.

22nd AIAA Computational Fluid Dynamics Conference, 2015, Texas, United States Of America, 22 - 26 June 2015, (Full Text)

43. Structural Analysis of an Unconventional Hybrid Control Surface of a Morphing Wing

Arslan P., Uğur K., Harun T., İlhan Ozan T., Yosheph Y., Gürses E., et al.

ICAST2014: 25th International Conference on Adaptive Structures and Technologies, The Hague, Netherlands, 6 - 08 October 2014, (Full Text)

44. A Hybrid Trailing Edge Control Surface Concept

Arslan P., Uğur K., Harun T., İlhan Ozan T., Yosheph Y., Gürses E., et al.

DeMEASS-VI, 6th Conference for Design, Modelling and Experiments of Advanced Structures and Systems, The Hague, Netherlands, 25 - 28 May 2014, (Full Text)

45. Evaluation of a Camber Morphing Concept Based on Controlled Flexibility

GÜÇLÜ S., EVREN S., ERDOĞAN TOLGA İ., ŞAHİN M., ÖZGEN S., YAMAN Y.

IFASD2009, International Forum on Aeroelasticity and Structural Dynamics 2009, SEATTLE, United States Of America, 21 - 25 June 2009, (Full Text)

46. High Speed Couette—Poiseuille Flow Stability in Reverse Flow Conditions

Ebrinç A. A., ÖZGEN S., DURSUNKAYA Z.

4th IASME/WSEAS International Conference on Fluid Mechanics and Aerodynamics, Girit, Greece, 21 - 23 August 2006, (Full Text)

Books 2

1. Comparison of Various Spring Analogy Related Mesh Deformation Techniques in Two-Dimensional Airfoil Design Optimization

ÖZGEN S., Yang Y.

in: EUCASS Progress in Flight Physics Vol. 9, Doyle Knight, Yevgeniy Bondar, Igor Lipatov, Phillippe Reijasse, Editor, EDP Sciences , Moskva, pp.337-352, 2017

2. In-flight Icing Simulations on Airfoils

UĞUR N., ÖZGEN S., GÖRGÜLÜ İ., TATAR V.

in: Sustainable Aviation, T. Hikmet Karakoç, Can Özgür Çolpan, M. barış Özerdem, Önder Altuntaş, M. Ziya Söğüt, Emin Açıkkalp , Editor, Springer, pp.279-289, 2016

Publications & Works