Publications & Works

Articles Published in Journals That Entered SCI, SSCI and AHCI Indexes

Polymer interfaces with carbon nanostructures: First principles density functional theory and molecular dynamics study of polyetheretherketone adsorption on graphene and nanotubes

Toraman G., Sert E., Gulasik H., Toffoli D. , TOFFOLİ H. , GÜRSES E.
COMPUTATIONAL MATERIALS SCIENCE, vol.191, 2021 (Journal Indexed in SCI) identifier identifier

Development of a procedure to model the mechanical behavior of composites with embedded element method by considering the matrix non-linearity

ŞIK A., GÜRSES E. , SABUNCUOĞLU B.
COMPOSITE STRUCTURES, vol.259, 2021 (Journal Indexed in SCI) identifier identifier

Modeling and simulation of coupled phase transformation and stress evolution in thermal barrier coatings

Sait F., GÜRSES E. , Aslan O.
INTERNATIONAL JOURNAL OF PLASTICITY, vol.134, 2020 (Journal Indexed in SCI) identifier identifier

Micromechanical modelling of carbon nanotube reinforced composite materials with a functionally graded interphase

Taç V., Gürses E.
Journal of Composite Materials, vol.53, pp.4337-4348, 2019 (Journal Indexed in SCI) identifier identifier

A modulus gradient model for inhomogeneous materials with isotropic linear elastic constituents

Gülaşık H., Göktepe S. , Gürses E.
European Journal of Mechanics, A/Solids, vol.78, 2019 (Journal Indexed in SCI) identifier identifier

Development of Bolted Flange Design Tool Based on Artificial Neural Network

Yildirim A., Akay A. A. , Gülasik H., Çöker D. , Gürses E. , Kayran A.
Journal of Pressure Vessel Technology, Transactions of the ASME, vol.141, 2019 (Journal Indexed in SCI) identifier identifier

A modulus gradient model for an axially loaded inhomogeneous elastic rod

Gulasuk H., Göktepe S. , Gürses E.
MECCANICA, vol.53, pp.2573-2584, 2018 (Journal Indexed in SCI) identifier identifier

Structural and aerodynamic analyses of a hybrid trailing edge control surface of a fully morphing wing

Gürses E. , Tunçöz I. O. , Yang Y., Arslan P., Kalkan U., Tıraş H., et al.
JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, vol.28, pp.979-991, 2017 (Journal Indexed in SCI) identifier identifier

Experimental and computational study of the damage process in CFRP composite beams under low-velocity impact

Topac O. T. , Gözlüklü B., Gürses E. , Çöker D.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, vol.92, pp.167-182, 2017 (Journal Indexed in SCI) identifier identifier

Modeling of spherulite microstructures in semicrystalline polymers

Oktay H. E. , Gürses E.
MECHANICS OF MATERIALS, vol.90, pp.83-101, 2015 (Journal Indexed in SCI) identifier identifier

Constitutive modeling of stress-driven grain growth in nanocrystalline metals

GÜRSES E. , Wafai H., El Sayed T.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, vol.21, no.2, 2013 (Journal Indexed in SCI) identifier identifier

A phenomenological two-phase constitutive model for porous shape memory alloys

EL SAYED T., GÜRSES E. , SIDDIQ A.
COMPUTATIONAL MATERIALS SCIENCE, vol.60, pp.44-52, 2012 (Journal Indexed in SCI) identifier identifier

A constitutive model of nanocrystalline metals based on competing grain boundary and grain interior deformation mechanisms

GÜRSES E. , EL SAYED T.
MATERIALS LETTERS, vol.65, pp.3391-3395, 2011 (Journal Indexed in SCI) identifier identifier

On evolving deformation microstructures in non-convex partially damaged solids

GÜRSES E. , MIEHE C.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, vol.59, no.6, pp.1268-1290, 2011 (Journal Indexed in SCI) identifier identifier

Constitutive modeling of strain rate effects in nanocrystalline and ultrafine grained polycrystals

GÜRSES E. , TAMER E. S.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, vol.48, no.10, pp.1610-1616, 2011 (Journal Indexed in SCI) identifier identifier

A variational multiscale constitutive model for nanocrystalline materials

GÜRSES E. , EL SAYED T.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, vol.59, no.3, pp.732-749, 2011 (Journal Indexed in SCI) identifier identifier

On tension-compression asymmetry in ultrafine-grained and nanocrystalline metals

GÜRSES E. , Tamer E. S.
COMPUTATIONAL MATERIALS SCIENCE, vol.50, no.2, pp.639-644, 2010 (Journal Indexed in SCI) identifier identifier

Shock-induced subgrain microstructures as possible homogenous sources of hot spots and initiation sites in energetic polycrystals

RIMOLI J., GÜRSES E. , ORTIZ M.
PHYSICAL REVIEW B, vol.81, no.1, 2010 (Journal Indexed in SCI) Creative Commons License identifier identifier

A computational framework of three-dimensional configurational-force-driven brittle crack propagation

GÜRSES E. , MIEHE C.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, vol.198, pp.1413-1428, 2009 (Journal Indexed in SCI) identifier identifier

A robust algorithm for configurational-force-driven brittle crack propagation with R-adaptive mesh alignment

MIEHE C., GÜRSES E.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, vol.72, no.2, pp.127-155, 2007 (Journal Indexed in SCI) identifier identifier

A computational framework of configurational-force-driven brittle fracture based on incremental energy minimization

MIEHE C., GÜRSES E. , BIRKLE M.
INTERNATIONAL JOURNAL OF FRACTURE, vol.145, no.4, pp.245-259, 2007 (Journal Indexed in SCI) identifier identifier

Analysis of material instabilities in inelastic solids by incremental energy minimization and relaxation methods: evolving deformation microstructures in finite plasticity

MIEHE C., LAMBRECHT M., GÜRSES E.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, vol.52, no.12, pp.2725-2769, 2004 (Journal Indexed in SCI) identifier identifier

Articles Published in Other Journals

Decamber Morphing Concepts by Using a Hybrid Trailing Edge Control Surface

Yaman Y. , Tuncoz I. O. , Yang Y., Arslan P., Kalkan U., Tiras H., et al.
AEROSPACE, vol.2, pp.482-504, 2015 (Journal Indexed in ESCI) identifier identifier

Analytical and numerical methods for finite-strain elastoplasticity

Gürses E. , Mainik A., Miehe C., Mielke A.
Lecture Notes in Applied and Computational Mechanics, vol.2006, no.28, pp.491-529, 2006 (Refereed Journals of Other Institutions) identifier

Refereed Congress / Symposium Publications in Proceedings

Determination of the 1st buckling and collapse loads for integrally stiffened panels by artificial neural network and design of experiment methodology

GÜZEL Ş. G. , GÜRSES E.
10th EASN International Conference on Innovation in Aviation and Space to the Satisfaction of the European Citizens, EASN 2020, Virtual, Online, 2 - 04 September 2020, vol.1024 identifier

Arafazlı, Heterojen Mikroyapının Çok Seviyeli Homojenleştirme Yaklaşımı ile Modellenmesi

Güzel D. , Gürses E.
VIII. Ulusal Havacılık ve Uzay Konferansı (UHUK), Ankara, Turkey, 9 - 11 September 2020, pp.1-12

Nanokompozit Malzemelerin Elastik Özelliklerinin Gömülü Eleman Yöntemi ile Hesaplanması

Altay A. E. , Gürses E.
VIII. Ulusal Havacılık ve Uzay Konferansı (UHUK), Ankara, Turkey, 9 - 11 September 2020, pp.1-7

Development of a modeling strategy to improve the embedded element method in composites modeling in case of matrix nonlinearity

ŞIK A., GÜRSES E. , SABUNCUOĞLU B.
Fibremod Conference, Leuven, Belgium, 9 - 12 December 2019

Structural Analysis and Design on Composite Rocket Motor Case

Erturan Y., Gürses E.
10th Ankara International Aerospace Conference, Ankara, Turkey, 18 - 20 September 2019

A micromechanically based multi-scale model for semi-crystalline polymers

Oktay H. E. , Gürses E. , Göktepe S.
Beyond 2019, Ankara, Turkey, 9 - 11 September 2019, pp.51

ÇOK FAZLI MALZEMELERİN DÜZLEMSEL ARAYÜZLERLE HOMOJENLEŞTİRİLMESİ: KİNEMATİK UYUMLU YAKLAŞIM

Oktay H. E. , GÜRSES E. , GÖKTEPE S.
21. Ulusal Mekanik Kongresi, Turkey, 2 - 06 September 2019

High Velocity Impact Response of High Strength Aluminum Using LS DYNA

BAŞARAN G., ÖZBAYRMOĞLU E., BÜTÜN O., ÖNEY E., GÜRSES E.
12th European LS DYNA Conference, Austria, 14 - 16 May 2019

Finite Element Modelling of TBC Failure Mechanisms by Using XFEM and CZM

Bostanci S. M. , GÜRSES E. , ÇÖKER D.
1st International Workshop on Plasticity, Damage and Fracture of Engineering Materials (IWPDF), Ankara, Turkey, 22 - 23 August 2019, vol.21, pp.91-100 identifier identifier

Development of Structural Neural Network Design Tool for Buckling Behaviour of Skin-Stringer Structures Under Combined Compression and Shear Loading

Okul A., Gürses E.
ASME 2018 International Mechanical Engineering Congress Exposition, Pennsylvania, United States Of America, 9 - 15 November 2018 identifier

Micromechanical Characterization of Nanotube Reinforced Polymers

Taç V., Gürses E.
1st International Conference on Advances in Mechanical and Mechatronics Engineering ICAMMEN 2018, Ankara, Turkey, 8 - 09 November 2018

A functionally graded multi-phase micromechanical model for carbon nanotube-polymer composites

Taç V., Gürses E.
9th Multiscale Materials Modeling (MMM) Conference, Osaka, Japan, 28 October - 02 November 2018

Micromechanical Modelling of Carbon Nanotube Reinforced Composite Materials with a Functionally Graded Interphase

Gülaşık H., Göktepe S. , Gürses E.
SES 2018, Madrid, Spain, 10 - 12 October 2018, pp.1

Yüksek Hızda Mermi Çarpışma Durumunda Zırh Kombinasyonlarının Sayısal Olarak İncelenmesi

Başaran G., Gürses E.
VII. Ulusal Havacılık ve Uzay Konferansı (UHUK), Samsun, Turkey, 12 - 14 September 2018

Finite element modelling of TBC failure mechanisms by using XFEM

Bostancı S. M. , Gürses E. , Çöker D.
ASME 2018 International Mechanical Engineering Congress and Exposition, IMECE 2018, Pennsylvania, United States Of America, 9 - 15 November 2018, vol.1 identifier

EXPERIMENTAL STUDY AND FINITE ELEMENT ANALYSIS OF DOVETAIL ATTACHMENTS

Akay A. A. , Çöker D. , Kayran A. , Gürses E.
ASME International Mechanical Engineering Congress and Exposition, Tama, Japan, 3 - 09 November 2017 identifier identifier

DEVELOPMENT OF ARTIFICIAL NEURAL NETWORK BASED DESIGN TOOL FOR AIRCRAFT ENGINE BOLTED FLANGE CONNECTION SUBJECT TO COMBINED AXIAL AND MOMENT LOAD

Sanli T. V. , Gürses E. , Çöker D. , Kayran A.
ASME International Mechanical Engineering Congress and Exposition, Tama, Japan, 3 - 09 November 2017 identifier identifier

A comparative study of the polymer-nanotube interface through a reactive force field and density functional theory

Toffoli H. , Gürses E. , Gülaşık H., Konuk M., Sert E., Toraman G.
International Symposium on Chemistry via Computation, Ankara, Turkey, 30 October 2017

Laminated Shell Modeling of Sandwich Beams with Ramp Region Under Four Point Bending Loading via Structural Optimization

Yardımcı O., Gürses E.
7th EASN International Conference on Innovation in European Aeronautics Research, Warszawa, Poland, 26 - 29 September 2017

Development of an Artificial Neural Network Based Analysis Method for Skin-Stringer Structures

Cankur A., Gürses E.
7th EASN International Conference on Innovation in European Aeronautics Research, Warszawa, Poland, 26 - 29 September 2017

An Artificial Neural Network Based Analysis Method for Skin- Stringer Structures

CANKUR A., GÜRSES E.
9th Ankara International Aerospace Conference, Ankara, Turkey, 20 - 22 September 2017

Equivalent Model of a Sandwich Beam With Ramp Region Under Four Point Bending via Genetic Algorithm

YARDIMCI O., GÜRSES E.
9th Ankara International Aerospace Conference, Ankara, Turkey, 20 - 22 September 2017

Alternative Finite Element Based Modeling Apporaches for Carbon Nanotubes

KOCA O., GÜLAŞIK H., GÜRSES E.
9th Ankara International Aerospace Conference, Ankara, Turkey, 20 - 22 September 2017

A Study on Energy Trapping Parameters of a Multistable Elastic Beam

Zembilören A., Gürses E.
9th Ankara International Aerospace Conference, Ankara, Turkey, 20 - 22 September 2017

Molecular Dynamics Simulations of Carbon Nanotube Reinforced Polymer Composites

Toraman G., Konuk M., Sert E., Toffoli H. , Gülaşık H., Gürses E.
9th Ankara International Aerospace Conference, Ankara, Turkey, 20 - 22 September 2017

Optimization of Compliant Parts of a Trailing Edge Control Surface of a Morphing Wing

Arslan P., Gürses E.
9th Ankara International Aerospace Conference, Ankara, Turkey, 20 - 22 September 2017

Implementation of the Submodelling Technique on the Dovetail Attachments”

Akay A. A. , Çöker D. , Kayran A. , Gürses E.
9th Ankara International Aerospace Conference, Ankara, Turkey, 20 - 22 September 2017

Micromechanically Motivated Modeling of Semicrystalline Polymers

Oktay H. E. , Gürses E. , Göktepe S.
XIV International Conference on Computational Plasticity COMPLAS, Barcelona, Spain, 5 - 07 September 2017

Kirişle Güçlendirilmiş Kabuk Yapılar İçin Yapay Sinir Ağ Bazlı Analiz Yöntemi Geliştirilmesi

CANKUR A., GÜRSES E.
XX. Ulusal Mekanik Kongresi, Bursa, Turkey, 5 - 09 September 2017

Damage Progression and Delamination Speeds in CFRP Under Impact Loading

BOZKURT M. O. , TOPAÇ Ö. T. , GÜRSES E. , ÇÖKER D.
20th International Conference on Composite Struc- tures ICCS 20, Paris, France, 4 - 07 September 2017

Multi-Scale Modelling of Carbon Nanotube Reinforced Polymer Composites

Toraman G., Konuk M., Gülaşık H., Sert E., Toffoli H. , Gürses E.
Materials Resistant to Extreme Conditions for Future Energy Systems, Kyyiv, Ukraine, 12 - 14 June 2017

Numerical Study of High Velocity Impact Response of Veicle Armor Combination Using LS DYNA

Başaran G., GÜRSES E.
11th European LS DYNA Conference, Salzburg, Austria, 9 - 11 May 2017

Birden Fazla Kararlı Hale Sahip Elastik Bİr Kirişin Enerji Tuzaklama Miktarını Etkileyen Parametrelerin Belirlenmesi

ZEMBİLÖREN A., GÜRSES E.
8. Savunma Teknolojileri Kongresi Kongresi (SAVTEK), Turkey, 12 - 14 October 2016

Bal Peteği Dolguya Sahip Sandviç Yapıların Bükme Yükü Altındaki Davranışlarının Karşılaştırılması

YARDIMCI O., GÜRSES E.
VI. Ulusal Havacılık ve Uzay Konferansı (UHUK), Kocaeli, Turkey, 28 - 30 September 2016

Eksenel Kesme ve Moment Yükü Altındaki Flanşlar İçin Yapay Sinir Ağına Dayalı Cıvatalı Flanş Tasarım Aracı Geliştirilmesi

Şanlı V., Akay A. A. , Yıldırım A., Gürses E. , Çöker D. , Kayran A.
VI. Ulusal Havacılık ve Uzay Konferansı (UHUK), Kocaeli, Turkey, 28 - 30 September 2016

EXPERIMENTAL AND NUMERICAL INVESTIGATION OF IMPACT INDUCED DAMAGE PROGRESSION IN FIBER REINFORCED COMPOSITES

GÜRSES E. , Topac T., ÇÖKER D.
ICTAM 2016, Montreal, Canada, 21 - 26 August 2016

EXPERIMENTAL AND COMPUTATIONAL STUDY OF DAMAGE PROCESS IN CFRP COMPOSITE BEAMS UNDER LOW VELOCITY IMPACT

TOPAÇ Ö. T. , GÜRSES E. , ÇÖKER D.
17th International Conference on Experimental Mechanics, Rodos, Greece, 3 - 07 July 2016

A Hybrid Morphing Trailing Edge Designed for Camber Change of the Control Surface

Tunçöz İ. O. , Yang Y., Gürses E. , Şahin M. , Yaman Y., Özgen S.
SciTech2016, AIAA Science and Technology Forum 2016, California, United States Of America, 4 - 08 January 2016

Hybrid Morphing Trailing Edge Designed for Camber Change of the Control Surface Change

TUNÇÖZ İ. O. , YANG Y., GÜRSES E. , ŞAHİN M. , ÖZGEN S. , YAMAN Y.
AIAA Scitech, 4 - 08 January 2016

Hybrid morphing trailing edge designed for camber change of the control surface

Tunçöz İ. O. , Yang Y., Gürses E. , Şahin M. , Özgen S. , Yaman Y.
24th AIAA/AHS Adaptive Structures Conference, 2016, California, United States Of America, 4 - 08 January 2016 identifier

DEVELOPMENT OF BOLTED FLANGE DESIGN TOOL BASED ON FINITE ELEMENT ANALYSIS AND ARTIFICIAL NEURAL NETWORK

Yildirim A., Kayran A. , Gulasik H., Çöker D. , Gürses E. , Kayran A.
ASME International Mechanical Engineering Congress and Exposition (IMECE2015), Texas, United States Of America, 13 - 19 November 2015 identifier

IMECE2015 51021 DEVELOPMENT OF BOLTED FLANGE DESIGN TOOL BASED ON FINITE ELEMENT ANALYSIS AND ARTIFICIAL NEURAL NETWORK

yıldırım a., hasan g., AKAY A. A. , GÜRSES E. , ÇÖKER D. , KAYRAN A.
IMECE2015 - ASME 2015 International Mechanical Engineering Congress & Exposition, Houston, 13 - 19 November 2015

Experimental and numerical investigation of damage interaction mechanism in composites under dynamic transverse loading

Topac O., Burak G., GÜRSES E. , ÇÖKER D.
SES 52nd Annual Technical Meeting, College Park, United States Of America, 26 - 28 October 2015

Failure Initiation and Progression in 0 90 CFRP Composite Beams Subject to Out of Plane Low velocity Impact

ÇÖKER D. , Topaç Ö. T. , GÜRSES E.
Society of Engineering Science 52nd Annual Technical Meeting, College Park, United States Of America, 26 - 28 October 2015

Büyük Oranda Şekil Değiştirebilen Bir Hibrid Firar Kenarı Kontrol Yüzeyinin Tasarımı ve Analizleri

İlhan Ozan T., Yosheph Y., Gürses E. , Şahin M. , Özgen S. , Yaman Y.
UHAT2015, III. Ulusal Havacılık Teknolojisi ve Uygulamaları Kongresi, İzmir, Turkey, 23 - 24 October 2015

Modeling of a Three-Dimensional Spherulite Microstructure in Semicrystalline Polymers

Oktay H. E. , Gürses E.
European Conference on Numerical Mathematics and Advanced Applications (ENUMATH), Ankara, Turkey, 14 - 18 September 2015, vol.112, pp.567-575 identifier identifier

Finite Element Modeling of Three Dimensional Spherulite Microstructures

Oktay H. E. , Gürses E.
European Conference on Numerical Mathematics and Advanced Applications (ENUMATH), Ankara, Turkey, 14 - 18 September 2015

PARAMETRIC STUDY FOR THE STUDY OF THE EFFECT OF CONTACT PARAMETERS FOR PLASTIC ANALYSIS OF BOLTED FLANGE CONNECTIONS

Yilmaz S. E. , Kayran A. , Gürses E. , Çöker D.
8th Ankara International Aerospace Conference, Ankara, Turkey, 10 - 12 September 2015

Design and Analysis of an Unmanned Aerial Vehicle Hybrid Trailing Edge Control Surface Having Camber and Decamber Capabilities

Topaç Ö. T. , Taşdemir B., GÜRSES E. , ÇÖKER D.
8th Ankara International Aerospace Conference, Ankara, Turkey, 10 - 12 September 2015

3D Numerical Simulation of Nonenergetic Reactive Armor

Saeidi F., Kurt M. C. , Gürses E. , Çöker D.
8th Ankara International Aerospace Conference, Ankara, Turkey, 10 - 12 September 2015

PARAMETERS CORRELATION STUDY TO INVESTIGATE THE EFFECTS OF GEOMETRIC VARIABLES ON THE SAFETY OF BOLTED FLANGE CONNECTIONS

Yildirim A., Akay A. A. , Gulasik H., Çöker D. , Gürses E. , Kayran A.
8th Ankarar International Aerospace Conference, Ankara, Turkey, 10 - 12 September 2015

MODELING OF A CIRCULAR DOUBLE FLANGE JOINT INCLUDING CONTACT AND FRICTION EFFECTS

Akay A. A. , Gulasik H., Yildirim A., Çöker D. , Kayran A. , Gürses E.
8th Ankara International Aerospcae Conference, Ankara, Turkey, 10 - 12 September 2015

Experimental Investigation of Impact Induced Failure Process in CFRP Composite Laminates

Topaç Ö. T. , Taşdemir B., GÜRSES E. , ÇÖKER D.
8th Ankara International Aerospace Conference, Ankara, Turkey, 10 - 12 September 2015

Modeling of Circular Double Flange Joint Including Contact and Friction Effects

AKAY A. A. , Gülaşık H., Yıldırım A., ÇÖKER D. , KAYRAN A. , GÜRSES E.
8th Ankara International Aerospace Conference-AIAC, Ankara, Turkey, 10 - 12 September 2015

Design and Analyses of an Unmanned Aerial Vehicle Hybrid Trailing Edge Control Surface Having Camber and Decamber Capabilities

İlhan Ozan T., Yosheph Y., Gürses E. , Şahin M. , Özgen S. , Yaman Y.
AIAC2015, 8th Ankara International Aerospace Conference, Ankara, Turkey, 10 - 12 September 2015

Numerical investigation of impact induced damage progression in composites and correlations with experiments

Topac O., Burak G., GÜRSES E. , ÇÖKER D.
5th ECCOMAS Thematic Conference on the Mechanical Response of Composites, Bristol, United Kingdom, 7 - 09 September 2015

Finite Element Modeling of Textured Surfaces of Ultra High Molecular Weight Tibial Insert

Oktay H. E. , Gürses E.
9th European Solid Mechanics Conference ESMC 2015, Madrid, Spain, 6 - 10 July 2015

Hibrit Bir Kontrol Yüzeyinin Hesaplamalı Akışkanlar Dinamiği Destekli Yapısal Analizi

Arslan P., Uğur K., Harun T., İlhan Ozan T., Yosheph Y., Özgen S. , et al.
UMTS2015, Uluslararası Katılımlı 17. Makina Teorisi Sempozyumu, İzmir, Turkey, 14 - 17 June 2015

Experimental and Computational Investigation of Out-of-Plane Low Velocity Impact Behavior of CFRP Composite Plates

Topac O. T. , Tasdemir B., Gozluklu B., GÜRSES E. , ÇÖKER D.
Annual Conference and Exposition of Society-for-Experimental-Mechanics on Experimental and Applied Mechanics, California, United States Of America, 8 - 11 June 2015, vol.8, pp.9-16 identifier identifier

Experimental and computational investigation of out of plane low velocity impact behaviour of CFRP composite plates

Topaç Ö. T. , Taşdemir B., Gözlüklü B., GÜRSES E. , ÇÖKER D.
SEM 2015 Conference & Exposition, Costa Mesa, CA, United States Of America, 8 - 11 June 2015

A Hybrid Trailing Edge Control Surface Capable of Camber and Decamber Morphing

İlhan Ozan T., Yosheph Y., Gürses E. , Şahin M. , Özgen S. , Yaman Y.
SMART2015, 7th ECCOMAS Thematic Conference on Smart Structures and Materials, Ponta-Delgada, Portugal, 3 - 06 June 2015

A Hybrid Control Surface Capable of Camber and Decamber Morphing

Tunçöz İ. O. , Yang Y., GÜRSES E. , ŞAHİN M. , ÖZGEN S. , YAMAN Y.
7th Eccomas Thematic Conference on Smart Structures and Materials, Ponte Delgada, Portugal, 3 - 06 June 2015

Bir Hibrit Firar Kenarı Kontrol Yüzeyinin Tasarımı ve Analizi

Arslan P., Uğur K., Harun T., İlhan Ozan T., Yosheph Y., Gürses E. , et al.
TMMOB Makina Mühendisleri Odası, VIII. Ulusal Uçak, Havacılık ve Uzay Mühendisliği Kurultayı, Eskişehir, Turkey, 22 - 23 May 2015

Design of Experiments Study for Determination for the Study of the Effect of Contact Parameters in Bolted Flange Connections

Yılmaz S. E. , Özcihan T., Kayran A. , Gürses E. , Çöker D.
International Conference on Advances in Mechanical Engineering (ICAME 2015), İstanbul, Turkey, 13 - 15 May 2015

Low velocity impact damage on laminated composites simulations and correlations with tests

Topac O., Gozluklu B., GÜRSES E. , ÇÖKER D.
International Conference on Advances in Composite Materials and Structures, İstanbul, Turkey, 13 - 15 April 2015

Structural Analysis of an Unconventional Hybrid Control Surface of a Morphing Wing

Arslan P., Uğur K., Harun T., İlhan Ozan T., Yosheph Y., Gürses E. , et al.
ICAST2014: 25th International Conference on Adaptive Structures and Technologies, The Hague, Netherlands, 6 - 08 October 2014 identifier

Katmanlı Kompozitlerde Düşük Hızlı Darbe Davranış Analizi

Topaç Ö. T. , Taşdemir B., GÜRSES E. , ÇÖKER D.
V. Ulusal Havacılık ve Uzay Konferansı (UHUK), Kayseri, Turkey, 8 - 10 September 2014

Konvansiyonel Olmayan İki Farklı Kontrol Yüzeyinin Yapısal Özelliklerinin Değerlendirilmesi ve Karşılaştırılması

Arslan P., Uğur K., Harun T., İlhan Ozan T., Yosheph Y., Gürses E. , et al.
UHUK2014, V. Ulusal Havacılık ve Uzay Konferansı, Kayseri, Turkey, 8 - 10 September 2014

Modeling of Spherulite Microstructures in Semicrystalline Polymers

Oktay H. E. , Gürses E.
IUTAM Symposium on Innovative Numerical Approaches for Materials and Structures in Multi-Field and Multi-Scale Problems, Siegen, Germany, 1 - 04 September 2014

Çukur İmla Şişen Zırh Etkileşiminin Sayısal Yöntemlerle İncelenmesi

Kurt M. C. , Saeidi F., Gürses E. , Çöker D.
7. Savunma Teknolojileri Kongresi Kongresi SAVTEK 2014, Ankara, Turkey, 25 - 27 June 2014

Konvansiyonel ve Konvansiyonel Olmayan Kontrol Yüzeyine Sahip İnsansız Hava Aracı Kanatlarının Aerodinamik Özelliklerinin Değerlendirilmesi

Topaç Ö. T. , Taşdemir B., GÜRSES E. , ÇÖKER D.
7. Savunma Teknolojileri Kongresi Kongresi SAVTEK 2014, Ankara, Turkey, 25 - 27 June 2014

Konvansiyonel ve Konvansiyonel Olmayan Kontrol Yüzeyine Sahip İnsansız Hava Aracı Kanatlarının Ağırlıklarının İncelenmesi

Topaç Ö. T. , Taşdemir B., GÜRSES E. , ÇÖKER D.
7. Savunma Teknolojileri Kongresi Kongresi SAVTEK 2014, Ankara, Turkey, 25 - 27 June 2014

Konvansiyonel ve Konvansiyonel Olmayan Kontrol Yüzeylerine Sahip İnsansız Hava Aracı Kanatlarının Aerodinamik Özelliklerinin Değerlendirilmesi

İlhan Ozan T., Yosheph Y., Özgen S. , Gürses E. , Şahin M. , Yaman Y.
SAVTEK2014, 7. Savunma Teknolojileri Kongresi, Ankara, Turkey, 25 - 27 June 2014

Konvansiyonel ve Konvansiyonel Olmayan Kontrol Yüzeylerine Sahip İnsansız Hava Aracı Kanatlarının Ağırlıklarının İncelenmesi

Arslan P., Uğur K., Harun T., Gürses E. , Şahin M. , Özgen S. , et al.
SAVTEK2014, 7. Savunma Teknolojileri Kongresi, Ankara, Turkey, 25 - 27 June 2014

Bir İnsansız Hava Aracının Konvansiyonel Olmayan Esnek Kontrol Yüzeylerinin Yapısal Analizi ve İç Yapısının Tasarımı

Arslan P., Uğur K., Harun T., İlhan Ozan T., Yosheph Y., Gürses E. , et al.
HİTEK2014, 3. Havacılıkta İleri Teknolojiler Konferansı, İstanbul, Turkey, 18 - 20 June 2014

Microstructural Modeling of Semicrystalline Polymers

Oktay H. E. , Gürses E.
IUTAM Symposium on Micromechanics of Defects in Solids, Sevilla, Spain, 9 - 13 June 2014

A Hybrid Trailing Edge Control Surface Concept

Arslan P., Uğur K., Harun T., İlhan Ozan T., Yosheph Y., Gürses E. , et al.
DeMEASS-VI, 6th Conference for Design, Modelling and Experiments of Advanced Structures and Systems, The Hague, Netherlands, 25 - 28 May 2014

Büyük Oranda Şekil Değiştirebilen Kanat Yüzeylerinin Aerodinamik Yükler Altındaki Davranışları

Arslan P., Kalkan U., Tıraş H., Tunçöz İ. O. , Yang Y., Gürses E. , et al.
2. Ulusal Havacılık Teknolojisi ve Uygulamaları Kongresi UHAT, İzmir, Turkey, 29 - 30 November 2013

Büyük Oranda Şekil Değiştirebilen Kontrol Yüzeylerinin Yapısal Özelliklerinin Değerlendirilmesi

Harun T., İlhan Ozan T., Gürses E. , Şahin M. , Özgen S. , Yaman Y.
UHAT2013, II. Ulusal Havacılık Teknolojisi ve Uygulamaları Kongresi, İzmir, Turkey, 29 - 30 November 2013

Büyük Oranda Şekil Değiştirebilen Kanat Yüzeylerinin Aerodinamik Yükler Altında Davranışları

Arslan P., Uğur K., Yosheph Y., Özgen S. , Şahin M. , Gürses E. , et al.
UHAT2013, II. Ulusal Havacılık Teknolojisi ve Uygulamaları Kongresi, İzmir, Turkey, 29 - 30 November 2013

A Three Dimensional Model for Nanocrystalline Materials based on Grain Interior and Grain Boundary Deformation Mechanisms

GÜRSES E.
COMPLAS XII - Computational Plasticity, Barselona, Spain, 3 - 05 September 2013

Yarı Kristal Polimer Malzemelerin Çok Ölçekli Modellenmesi

Oktay H. E. , Gürses E.
XVIII. Ulusal Mekanik Kongresi, Manisa, Turkey, 26 - 30 August 2013

Büyük Oranda Şekil Değiştirebilen Kanat Kontrol Yüzeylerinin Uçuştaki Etkileri

Yaman Y. , Özgen S. , Şahin M. , Gürses E.
UHAT2012, I. Ulusal Havacılık Teknolojisi ve Uygulamaları Kongresi, İzmir, Turkey, 20 - 22 December 2012

Modeling of Nanocrystalline Metals based on Competing Grain Boundary and Grain Interior Deformation Mechanisms

GÜRSES E. , EL SAYED T.
ICTAM - 23rd International Congress of Theoretical and Applied Mechanics, Pekin, China, 19 August - 24 October 2012

Multiscale Modeling of Nanocrystalline Metals based on Competing Grain Boundary and Grain Interior Deformation Mechanisms

GÜRSES E.
1st International Workshop on Physics based Modelling of Material Properties and Experimental Observations, Ankara, Turkey, 22 - 23 October 2012

Constitutive Modeling of Nanocrystalline Metals based on Competing Grain Boundary and Grain Interior Deformation Mechanisms

GÜRSES E. , EL SAYED T.
ECCOMAS - European Congress on Computational Methods in Applied Sciences and Engineering, Viyana, Austria, 10 - 14 September 2012

Multiscale Modeling of Nanocrystalline Materials A Variational Approach

Birkle M., GÜRSES E. , Miehe C.
82nd Annual Meeting of Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Graz, Austria, 18 - 21 April 2011, vol.11, pp.511-512

Softening in Nanocrystalline Metals Modeling of Grain Growth Induced Creep and Relaxation

Birkle M., GÜRSES E. , Miehe C.
82nd Annual Meeting of Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Graz, Austria, 18 - 21 April 2011, vol.11, pp.377-378

A Variational Constitutive Model of Void Growth in Single and Polycrystals Application to Ultrafine Grained and Nanocrystalline Materials

GÜRSES E. , EL SAYED T.
9th World Congress on Computational Mechanics (WCCM), Sidney, Australia, 19 - 23 July 2010

A Variational Constitutive Model for Void Growth in Crystals Application to Nanocrystals

GÜRSES E. , EL SAYED T.
IV European Conference on Computational Mechanics (ECCM), Paris, France, 16 - 21 May 2010

Multiscale Modeling of High Energetic Materials under Impact Loads

RIMOLI J., GÜRSES E. , ORTIZ M.
10th US National Congress on Computational Mechanics, Columbus, United States Of America, 16 - 19 July 2009

A Computational Framework of Three Dimensional Configurational Force Driven Brittle Crack Propagation

Birkle M., GÜRSES E. , Miehe C.
78th Annual Meeting of Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Zürich, Switzerland, 16 - 20 July 2007, vol.7, pp.4030019-4030020

A Robust Adaptive Algorithm for Material Force Driven Brittle Fracture Based on Incremental Energy Minimization

Miehe C., GÜRSES E. , Zimmermann D.
6th European Solid Mechanics Conference, Budapest, Hungary, 28 August - 01 September 2006

On Variational Based Scale Bridging of Inelastic Composites

Birkle M., GÜRSES E. , Miehe C.
77th Annual Meeting of Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Berlin, Germany, 27 - 31 March 2006, vol.6, pp.465-466

Robust Algorithm for Brittle Fracture based on Energy Minimization

GÜRSES E. , Miehe C.
77th Annual Meeting of Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Berlin, Germany, 27 - 31 March 2006, vol.6, pp.167-168

Deformation Driven Homogenization of Fracturing Solids

Birkle M., GÜRSES E. , Miehe C.
76th Annual Meeting of Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Luxembourg, 28 March - 01 April 2005, vol.5, pp.333-334

Analysis of Evolving Deformation Microstructures in Instable Inelastic Solids Based on Energy Relaxation Methods

GÜRSES E. , Miehe C.
XXI International Congress of Theoretical and Applied Mechanics ICTAM, Varşova, Poland, 15 - 21 August 2004

Numerical Computation of Anisotropically Evolving Yield Surfaces Based on Micro to Macro Transitions

Birkle M., GÜRSES E. , Miehe C.
75th Annual Meeting of Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Dresden, Germany, 21 - 26 March 2004, vol.4, pp.219-220

Relaxation Analysis of Material Instabilities in Damage Mechanics Based on Incremental Convexification Techniques

Lambrecht M., GÜRSES E. , Miehe C.
VII International Conference on Computational Plasticity, COMPLAS, Barcelona, Spain, 7 - 10 April 2003

Application of Relaxation Techniques to Nonconvex Isotropic Damage Model

Birkle M., GÜRSES E. , Miehe C.
74th Annual Meeting of Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Abano Terme, Italy, 24 - 28 March 2003, vol.3, pp.222-223

Books & Book Chapters

Modeling of a Three-Dimensional Spherulite Microstructure in Semicrystalline Polymers

Oktay H. E. , Gürses E.
in: Numerical Mathematics and Advanced Applications, M. Manguoğlu,M. Tezer-Sezgin,S. Göktepe,Ö. Uğur, Editor, Springer, London/Berlin , Berlin, pp.567-574, 2016

Experimental and Computational Investigation of Out-of-Plane Low Velocity Impact Behavior of CFRP Composite Plates

TOPAÇ Ö. T. , TAŞDEMİR B., GÖZLÜKLÜ B., GÜRSES E. , ÇÖKER D.
in: Failure and Damage Evolution Volume 8 Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics, Beese, Allison M., Zehnder, Alan T., Xia, Shuman, Editor, Springer, pp.9-16, 2016

Experimental and Computational Investigation of Out-of-Plane Low Velocity Impact Behavior of CFRP Composite Plates

Topac T., Tasdemir B., Gozluklu B., GÜRSES E. , ÇÖKER D.
in: Fracture Fatigue Failure and Damage Evolution Volume 8, Allison M. Beese, Alan T. Zehnder, Shuman Xia, Editor, Springer, pp.9-16, 2016

Analytical and Numerical Methods for Finite Strain Elastoplasticity

GÜRSES E. , MAINIK A., MIEHE C., MIELKE A.
in: Multifield problems in Fluid and Solid Mechanics, Helmig, R., Mielke, A., Wohlmuth, B., Editor, Springer, pp.491-529, 2006

Episodes in the Encyclopedia

Encyclopedia of Renewable and Sustainable Materials, Volume 1

Saeidi F., GÜRSES E. , ASLAN Ö.
Elsevier, pp.986-992, 2020