Education Information
2002 - 2007
2002 - 2007Doctorate
Universitaet Stuttgart, İnşaat Mühendisliği Fakültesi, Germany
2000 - 2002
2000 - 2002Postgraduate
Universitaet Stuttgart, Germany
1994 - 1999
1994 - 1999Undergraduate
Middle East Technical University, Faculty of Engineering, Department of Civil Engineering, Turkey
Dissertations
2007
2007Doctorate
Aspects of Energy Minimization in Solid Mechanics: Evolution of Inelastic Microstructures and Crack Propagation
Universitaet Stuttgart, İnşaat Mühendisliği Fakültesi
2002
2002Postgraduate
Two-Scale Relaxation Analysis of Finite-Strain Single Slip Plasticity based on a First-Order Rank-One Convexification
Universitaet Stuttgart
Foreign Languages
C1 Advanced
C1 AdvancedEnglish
Research Areas
Mechanics of Solid Bodies
Solid Mechanics
Fracture Mechanics
Finite Element Methods
Continuous Mechanics
Composites
Polymeric Materials
Nanomaterials
Academic Titles / Tasks
2017 - Continues
2017 - ContinuesAssociate Professor
Middle East Technical University, Faculty of Engineering, Department of Aerospace Engineering
2011 - 2017
2011 - 2017Assistant Professor
Middle East Technical University, Faculty of Engineering, Department of Aerospace Engineering
2009 - 2011
2009 - 2011Medical Doctor
King Abdullah University of Science and Technology, Faculty of Engineering, Mechanical Engineering
2007 - 2009
2007 - 2009Medical Doctor
California Institute of Technology, Mühendislik Fakültesi, Havacılık Mühendisliği
2002 - 2007
2002 - 2007Research Assistant
Universitaet Stuttgart, Mühendislik Fakültesi, İnşaat Mühendisliği
Managerial Experience
2019 - 2021
2019 - 2021Deputy Head of Department
Middle East Technical University, Faculty of Engineering, Department of Aerospace Engineering
Non Academic Experience
2009 - 2011
2009 - 2011Doktora Sonrası Araştırmacı
King Abdullah University of Science and Technology
2007 - 2009
2007 - 2009Doktora Sonrası Araştımacı
California Institute of Technology
2002 - 2007
2002 - 2007Araştırma Görevlisi
University of Stuttgart
Courses
Advising Theses
2023
2023Postgraduate
Evolutionary topology optimization of a folding missile wing for stiffness and frequency
Şahin M., Gürses E. (Co-Advisor)
A.ÜRÜN(Student)
2022
2022Postgraduate
Numerical calculation of homogenized properties of piezoelectric composites
Gürses E. (Advisor)
M.KURT(Student)
2022
2022Doctorate
Mechanical characterization of additively manufactured Ti-6Al-4V aircraft structural components produced by electron beam melting
Şahin M., Gürses E. (Co-Advisor)
F.YILMAZ(Student)
2022
2022Postgraduate
Determination of elastic properties of polymer nanocomposites using embedded element method
Gürses E. (Advisor)
A.ELİF(Student)
2021
2021Postgraduate
A two-level homogenization method for polymer nanocomposites with coated inclusions
GÜRSES E. (Advisor)
D.GÜZEL(Student)
2021
2021Postgraduate
Artificial neural network based tool for buckling loads of integrally stiffened aircraft structural panels
GÜRSES E. (Advisor)
S.GÜZEL(Student)
2020
2020Doctorate
Micromechanical modeling of semicrystalline polymers with spherulite morphology
Göktepe S., Gürses E. (Co-Advisor)
H.Emre(Student)
2020
2020Doctorate
Modeling oxidation and plasticity induced damage in thermal barrier coatings (TBCS)
Gürses E.
F.SAİT(Student)
2019
2019Postgraduate
Development of a structural design methodology for filament winding composite rocket motor case
Gürses E. (Advisor)
Y.ERTURAN(Student)
2019
2019Postgraduate
Finite element modelling of tbc failure mechanisms byusing extended finite element method and cohesive zonemethod
Gürses E. (Advisor)
S.MESUT(Student)
2019
2019Postgraduate
Experimental and numerical investigation of ballisticimpact behaviour of high strength aluminium plates
Gürses E. (Advisor)
G.BAŞARAN(Student)
2019
2019Postgraduate
Development of an equivalent model of aluminum honeycomb sandwich structures subjected to transverse loads
Gürses E. (Advisor)
O.YARDIMCI(Student)
2019
2019Postgraduate
Development of structural optimization and neural network design tool for buckling behaviour of skin stringer structures under combined compression and shear loading
Gürses E. (Advisor)
A.OKUL(Student)
2018
2018Postgraduate
A study on energy trapping parameters of a multistableelastic beam
GÜRSES E. (Advisor)
A.ZEMBİLÖREN(Student)
2018
2018Postgraduate
Micromechanical modeling of carbon nanotube – polymer composites
GÜRSES E. (Advisor)
V.TAÇ(Student)
2018
2018Postgraduate
Density functional theory and molecular dynamics simulations of carbon nanotubes, polyetheretherketone and their interfaces
GÜRSES E. (Co-Advisor), TOFFOLİ H. (Co-Advisor)
G.TORAMAN(Student)
2018
2018Doctorate
A modulus gradient elasticity model for nano-reinforced composites
GÜRSES E. (Advisor)
H.GÜLAŞIK(Student)
2017
2017Postgraduate
Optimization of compliant parts of a hybrid trailing edge control surface of a morphing unmanned aerial vehicle
GÜRSES E. (Advisor)
P.ARSLAN(Student)
2017
2017Postgraduate
Development of an artificial neural network based analysis method for skin-stringer structures
GÜRSES E. (Advisor)
A.CANKUR(Student)
2017
2017Postgraduate
Numerical simulation of non-energetic reactive armors
GÜRSES E. (Advisor)
M.CAN(Student)
2016
2016Postgraduate
Experimental and numerical investigation of damage process in composite laminates under low -velocity impact
GÜRSES E. (Co-Advisor), ÇÖKER D. (Co-Advisor)
Ö.TANAY(Student)
2016
2016Postgraduate
Finite element analysis and experimental study of dovetail attachments
GÜRSES E. (Advisor)
A.ARDA(Student)
Published journal articles indexed by SCI, SSCI, and AHCI
2024
2024A non-iterative boundary element formulation for nonlinear viscoelasticity
Akay A. A., Gürses E., Göktepe S.
Engineering Analysis with Boundary Elements , vol.163, pp.223-236, 2024 (SCI-Expanded)
2024
2024High-fidelity simulations of low-velocity impact induced matrix cracking and dynamic delamination progression in CFRP beams
Batmaz O. A., Bozkurt M. O., GÜRSES E., ÇÖKER D.
Composites Part A: Applied Science and Manufacturing , vol.177, 2024 (SCI-Expanded)
2023
2023Determination of the elastoplastic properties of Ti-6Al-4V alloy manufactured by electron beam melting
Yılmaz F., Gürses E., Şahin M.
Rapid Prototyping Journal , vol.29, no.10, pp.2149-2163, 2023 (SCI-Expanded)
2023
2023A new time-domain boundary element formulation for generalized models of viscoelasticity
Akay A. A., Gürses E., Göktepe S.
ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS , vol.150, pp.30-43, 2023 (SCI-Expanded)
2022
2022The Effect of Apical Vertebra Position on Growing Rod Treatment: A Clinical and Finite Element Study
DURSUN G., Cetik R. M., GÜZEL D., DEMİRKIRAN H. G., Ramazanov R., Dede O., et al.
Journal of Pediatric Orthopaedics , vol.42, 2022 (SCI-Expanded)
2021
2021Polymer interfaces with carbon nanostructures: First principles density functional theory and molecular dynamics study of polyetheretherketone adsorption on graphene and nanotubes
Toraman G., Sert E., Gulasik H., Toffoli D., TOFFOLİ H., GÜRSES E.
COMPUTATIONAL MATERIALS SCIENCE , vol.191, 2021 (SCI-Expanded)
2021
2021Development of a procedure to model the mechanical behavior of composites with embedded element method by considering the matrix non-linearity
ŞIK A., GÜRSES E., SABUNCUOĞLU B.
COMPOSITE STRUCTURES , vol.259, 2021 (SCI-Expanded)
2020
2020Modeling and simulation of coupled phase transformation and stress evolution in thermal barrier coatings
Sait F., Gürses E., Aslan O.
INTERNATIONAL JOURNAL OF PLASTICITY , vol.134, 2020 (SCI-Expanded)
2019
2019Micromechanical modelling of carbon nanotube reinforced composite materials with a functionally graded interphase
Taç V., Gürses E.
Journal of Composite Materials , vol.53, pp.4337-4348, 2019 (SCI-Expanded)
2019
2019A modulus gradient model for inhomogeneous materials with isotropic linear elastic constituents
Gülaşık H., Göktepe S., Gürses E.
European Journal of Mechanics, A/Solids , vol.78, 2019 (SCI-Expanded)
2019
2019Development of Bolted Flange Design Tool Based on Artificial Neural Network
Yildirim A., Akay A. A., Gülasik H., Çöker D., Gürses E., Kayran A.
Journal of Pressure Vessel Technology, Transactions of the ASME , vol.141, 2019 (SCI-Expanded)
2018
2018A modulus gradient model for an axially loaded inhomogeneous elastic rod
Gulasuk H., Göktepe S., Gürses E.
MECCANICA , vol.53, pp.2573-2584, 2018 (SCI-Expanded)
2017
2017Structural and aerodynamic analyses of a hybrid trailing edge control surface of a fully morphing wing
Gürses E., Tunçöz I. O., Yang Y., Arslan P., Kalkan U., Tıraş H., et al.
JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES , vol.28, pp.979-991, 2017 (SCI-Expanded)
2017
2017Experimental and computational study of the damage process in CFRP composite beams under low-velocity impact
Topac O. T., Gözlüklü B., Gürses E., Çöker D.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING , vol.92, pp.167-182, 2017 (SCI-Expanded)
2015
2015Modeling of spherulite microstructures in semicrystalline polymers
Oktay H. E., Gürses E.
MECHANICS OF MATERIALS , vol.90, pp.83-101, 2015 (SCI-Expanded)
2013
2013Constitutive modeling of stress-driven grain growth in nanocrystalline metals
GÜRSES E., Wafai H., El Sayed T.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING , vol.21, no.2, 2013 (SCI-Expanded)
2012
2012A phenomenological two-phase constitutive model for porous shape memory alloys
EL SAYED T., GÜRSES E., SIDDIQ A.
COMPUTATIONAL MATERIALS SCIENCE , vol.60, pp.44-52, 2012 (SCI-Expanded)
2011
2011A constitutive model of nanocrystalline metals based on competing grain boundary and grain interior deformation mechanisms
Gürses E., El Sayed T.
MATERIALS LETTERS , vol.65, pp.3391-3395, 2011 (SCI-Expanded)
2011
2011On evolving deformation microstructures in non-convex partially damaged solids
GÜRSES E., MIEHE C.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS , vol.59, no.6, pp.1268-1290, 2011 (SCI-Expanded)
2011
2011Constitutive modeling of strain rate effects in nanocrystalline and ultrafine grained polycrystals
Gürses E., Tamer E. S.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES , vol.48, no.10, pp.1610-1616, 2011 (SCI-Expanded)
2011
2011A variational multiscale constitutive model for nanocrystalline materials
GÜRSES E., EL SAYED T.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS , vol.59, no.3, pp.732-749, 2011 (SCI-Expanded)
2010
2010On tension-compression asymmetry in ultrafine-grained and nanocrystalline metals
GÜRSES E., Tamer E. S.
COMPUTATIONAL MATERIALS SCIENCE , vol.50, no.2, pp.639-644, 2010 (SCI-Expanded)
2010
2010Shock-induced subgrain microstructures as possible homogenous sources of hot spots and initiation sites in energetic polycrystals
RIMOLI J., GÜRSES E., ORTIZ M.
PHYSICAL REVIEW B , vol.81, no.1, 2010 (SCI-Expanded)
2009
2009A computational framework of three-dimensional configurational-force-driven brittle crack propagation
GÜRSES E., MIEHE C.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING , vol.198, pp.1413-1428, 2009 (SCI-Expanded)
2007
2007A robust algorithm for configurational-force-driven brittle crack propagation with R-adaptive mesh alignment
MIEHE C., GÜRSES E.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING , vol.72, no.2, pp.127-155, 2007 (SCI-Expanded)
2007
2007A computational framework of configurational-force-driven brittle fracture based on incremental energy minimization
Mıehe C., Gürses E., Bırkle M.
INTERNATIONAL JOURNAL OF FRACTURE , vol.145, no.4, pp.245-259, 2007 (SCI-Expanded)
2004
2004Analysis of material instabilities in inelastic solids by incremental energy minimization and relaxation methods: evolving deformation microstructures in finite plasticity
MIEHE C., LAMBRECHT M., GÜRSES E.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS , vol.52, no.12, pp.2725-2769, 2004 (SCI-Expanded)
Articles Published in Other Journals
2022
2022A Two-Level Homogenization Approach for Polymer Nanocomposites with Coated Inclusions
GÜZEL D., GÜRSES E.
Procedia Structural Integrity , vol.35, pp.34-41, 2022 (Peer-Reviewed Journal)
2021
2021Weight reduction of an unmanned aerial vehicle pylon fitting by topology optimization and additive manufacturing with electron beam melting
Gürses E.
Journal of Additive Manufacturing Technologies , vol.1, no.2, pp.1-5, 2021 (Peer-Reviewed Journal)
2015
2015Decamber Morphing Concepts by Using a Hybrid Trailing Edge Control Surface
Yaman Y., Tuncoz I. O., Yang Y., Arslan P., Kalkan U., Tiras H., et al.
AEROSPACE , vol.2, pp.482-504, 2015 (ESCI)
Refereed Congress / Symposium Publications in Proceedings
2023
2023Formulation of a Bilinear Traction-Separation Interface Law in Boundary Elements with Homogenization
AKAY A. A., GÖKTEPE S., GÜRSES E.
3rd International Workshop on Plasticity, Damage and Fracture of Engineering Materials, IWPDF 2023, İstanbul, Turkey, 4 - 06 October 2023, vol.61, pp.138-147
2023
2023Modeling of coupled behavior and microcracking of multifunctional composite structures for energy storage
Uyar İ., GÜRSES E.
3rd International Workshop on Plasticity, Damage and Fracture of Engineering Materials, IWPDF 2023, İstanbul, Turkey, 4 - 06 October 2023, vol.61, pp.195-205
2023
2023Numerical simulations of low-velocity impact experiments on cross-ply CFRP beams using a heuristic boundary conditions approach with spring elements
BATMAZ O. A., Bozkurt M. O., GÜRSES E., ÇÖKER D.
3rd International Workshop on Plasticity, Damage and Fracture of Engineering Materials, IWPDF 2023, İstanbul, Turkey, 4 - 06 October 2023, vol.61, pp.305-314
2022
2022PİEZOELEKTRİK FİBERLİ KOMPOZİTLERİN ETKİN ÖZELLİKLERİNİN DEĞERLENDİRİLMESİ
Kurt M., Gürses E.
9. ULUSAL HAVACILIK VE UZAY KONFERANSI (UHUK), İzmir, Turkey, 14 - 16 September 2022, pp.1-14
2022
2022KATLANABİLİR FÜZE KANADININ DİRENGENLİK KISTASINA GÖRE YAPISAL ENİYİLEMESİ
Ürün A., Şahin M., Gürses E.
9. ULUSAL HAVACILIK VE UZAY KONFERANSI (UHUK), İzmir, Turkey, 14 - 16 September 2022, pp.1-13
2022
2022TOPOLOJİ OPTİMİZASYONU VE EKLEMELİ İMALAT İLE HAFİFLETİLEN BİR İNSANSIZ HAVA ARACI PİLON BAĞLANTI PARÇASININ KALİFİKASYONU
Yılmaz F., Gürses E., Şahin M.
10. Savunma Teknolojileri Kongresi (SAVTEK), Ankara, Turkey, 13 - 15 September 2022, pp.1067-1080
2021
2021A Two-Level Homogenization Method for Coated Inclusion Problem in Elasticity
Güzel D., Gürses E.
11th ANKARA INTERNATIONAL AEROSPACE CONFERENCE, Ankara, Turkey, 08 September 2021
2020
2020Determination of the 1st buckling and collapse loads for integrally stiffened panels by artificial neural network and design of experiment methodology
Güzel Ş. G., Gürses E.
10th EASN International Conference on Innovation in Aviation and Space to the Satisfaction of the European Citizens, EASN 2020, Virtual, Online, 2 - 04 September 2020, vol.1024
2020
2020Arafazlı, Heterojen Mikroyapının Çok Seviyeli Homojenleştirme Yaklaşımı ile Modellenmesi
Güzel D., Gürses E.
VIII. Ulusal Havacılık ve Uzay Konferansı (UHUK), Ankara, Turkey, 9 - 11 September 2020, pp.1-12
2020
2020Nanokompozit Malzemelerin Elastik Özelliklerinin Gömülü Eleman Yöntemi ile Hesaplanması
Altay A. E., Gürses E.
VIII. Ulusal Havacılık ve Uzay Konferansı (UHUK), Ankara, Turkey, 9 - 11 September 2020, pp.1-7
2019
2019Development of a modeling strategy to improve the embedded element method in composites modeling in case of matrix nonlinearity
ŞIK A., GÜRSES E., SABUNCUOĞLU B.
Fibremod Conference, Leuven, Belgium, 9 - 12 December 2019
2019
2019Structural Analysis and Design on Composite Rocket Motor Case
Erturan Y., Gürses E.
10th Ankara International Aerospace Conference, Ankara, Turkey, 18 - 20 September 2019
2019
2019A micromechanically based multi-scale model for semi-crystalline polymers
Oktay H. E., Gürses E., Göktepe S.
Beyond 2019, Ankara, Turkey, 9 - 11 September 2019, pp.51
2019
2019ÇOK FAZLI MALZEMELERİN DÜZLEMSEL ARAYÜZLERLE HOMOJENLEŞTİRİLMESİ: KİNEMATİK UYUMLU YAKLAŞIM
Oktay H. E., GÜRSES E., GÖKTEPE S.
21. Ulusal Mekanik Kongresi, Turkey, 2 - 06 September 2019
2019
2019High Velocity Impact Response of High Strength Aluminum Using LS DYNA
BAŞARAN G., ÖZBAYRMOĞLU E., BÜTÜN O., ÖNEY E., GÜRSES E.
12th European LS DYNA Conference, Austria, 14 - 16 May 2019
2019
2019Finite Element Modelling of TBC Failure Mechanisms by Using XFEM and CZM
Bostanci S. M., GÜRSES E., ÇÖKER D.
1st International Workshop on Plasticity, Damage and Fracture of Engineering Materials (IWPDF), Ankara, Turkey, 22 - 23 August 2019, vol.21, pp.91-100
2018
2018Development of Structural Neural Network Design Tool for Buckling Behaviour of Skin-Stringer Structures Under Combined Compression and Shear Loading
Okul A., Gürses E.
ASME 2018 International Mechanical Engineering Congress Exposition, Pennsylvania, United States Of America, 9 - 15 November 2018
2018
2018Micromechanical Characterization of Nanotube Reinforced Polymers
Taç V., Gürses E.
1st International Conference on Advances in Mechanical and Mechatronics Engineering ICAMMEN 2018, Ankara, Turkey, 8 - 09 November 2018
2018
2018A functionally graded multi-phase micromechanical model for carbon nanotube-polymer composites
Taç V., Gürses E.
9th Multiscale Materials Modeling (MMM) Conference, Osaka, Japan, 28 October - 02 November 2018
2018
2018Micromechanical Modelling of Carbon Nanotube Reinforced Composite Materials with a Functionally Graded Interphase
Gülaşık H., Göktepe S., Gürses E.
SES 2018, Madrid, Spain, 10 - 12 October 2018, pp.1
2018
2018Yüksek Hızda Mermi Çarpışma Durumunda Zırh Kombinasyonlarının Sayısal Olarak İncelenmesi
Başaran G., Gürses E.
VII. Ulusal Havacılık ve Uzay Konferansı (UHUK), Samsun, Turkey, 12 - 14 September 2018
2018
2018Finite element modelling of TBC failure mechanisms by using XFEM
Bostancı S. M., Gürses E., Çöker D.
ASME 2018 International Mechanical Engineering Congress and Exposition, IMECE 2018, Pennsylvania, United States Of America, 9 - 15 November 2018, vol.1
2017
2017EXPERIMENTAL STUDY AND FINITE ELEMENT ANALYSIS OF DOVETAIL ATTACHMENTS
Akay A. A., Çöker D., Kayran A., Gürses E.
ASME International Mechanical Engineering Congress and Exposition, Tama, Japan, 3 - 09 November 2017
2017
2017DEVELOPMENT OF ARTIFICIAL NEURAL NETWORK BASED DESIGN TOOL FOR AIRCRAFT ENGINE BOLTED FLANGE CONNECTION SUBJECT TO COMBINED AXIAL AND MOMENT LOAD
Sanli T. V., Gürses E., Çöker D., Kayran A.
ASME International Mechanical Engineering Congress and Exposition, Tama, Japan, 3 - 09 November 2017
2017
2017A comparative study of the polymer-nanotube interface through a reactive force field and density functional theory
Toffoli H., Gürses E., Gülaşık H., Konuk M., Sert E., Toraman G.
International Symposium on Chemistry via Computation, Ankara, Turkey, 30 October 2017
2017
2017Laminated Shell Modeling of Sandwich Beams with Ramp Region Under Four Point Bending Loading via Structural Optimization
Yardımcı O., Gürses E.
7th EASN International Conference on Innovation in European Aeronautics Research, Warszawa, Poland, 26 - 29 September 2017
2017
2017Development of an Artificial Neural Network Based Analysis Method for Skin-Stringer Structures
Cankur A., Gürses E.
7th EASN International Conference on Innovation in European Aeronautics Research, Warszawa, Poland, 26 - 29 September 2017
2017
2017Equivalent Model of a Sandwich Beam With Ramp Region Under Four Point Bending via Genetic Algorithm
YARDIMCI O., GÜRSES E.
9th Ankara International Aerospace Conference, Ankara, Turkey, 20 - 22 September 2017
2017
2017A Study on Energy Trapping Parameters of a Multistable Elastic Beam
Zembilören A., Gürses E.
9th Ankara International Aerospace Conference, Ankara, Turkey, 20 - 22 September 2017
2017
2017Alternative Finite Element Based Modeling Apporaches for Carbon Nanotubes
KOCA O., GÜLAŞIK H., GÜRSES E.
9th Ankara International Aerospace Conference, Ankara, Turkey, 20 - 22 September 2017
2017
2017Optimization of Compliant Parts of a Trailing Edge Control Surface of a Morphing Wing
Arslan P., Gürses E.
9th Ankara International Aerospace Conference, Ankara, Turkey, 20 - 22 September 2017
2017
2017Molecular Dynamics Simulations of Carbon Nanotube Reinforced Polymer Composites
Toraman G., Konuk M., Sert E., Toffoli H., Gülaşık H., Gürses E.
9th Ankara International Aerospace Conference, Ankara, Turkey, 20 - 22 September 2017
2017
2017An Artificial Neural Network Based Analysis Method for Skin- Stringer Structures
CANKUR A., GÜRSES E.
9th Ankara International Aerospace Conference, Ankara, Turkey, 20 - 22 September 2017
2017
2017Implementation of the Submodelling Technique on the Dovetail Attachments”
Akay A. A., Çöker D., Kayran A., Gürses E.
9th Ankara International Aerospace Conference, Ankara, Turkey, 20 - 22 September 2017
2017
2017Kirişle Güçlendirilmiş Kabuk Yapılar İçin Yapay Sinir Ağ Bazlı Analiz Yöntemi Geliştirilmesi
CANKUR A., GÜRSES E.
XX. Ulusal Mekanik Kongresi, Bursa, Turkey, 5 - 09 September 2017
2017
2017Micromechanically Motivated Modeling of Semicrystalline Polymers
Oktay H. E., Gürses E., Göktepe S.
XIV International Conference on Computational Plasticity COMPLAS, Barcelona, Spain, 5 - 07 September 2017
2017
2017Damage Progression and Delamination Speeds in CFRP Under Impact Loading
BOZKURT M. O., TOPAÇ Ö. T., GÜRSES E., ÇÖKER D.
20th International Conference on Composite Struc- tures ICCS 20, Paris, France, 4 - 07 September 2017
2017
2017Multi-Scale Modelling of Carbon Nanotube Reinforced Polymer Composites
Toraman G., Konuk M., Gülaşık H., Sert E., Toffoli H., Gürses E.
Materials Resistant to Extreme Conditions for Future Energy Systems, Kyyiv, Ukraine, 12 - 14 June 2017
2017
2017Numerical Study of High Velocity Impact Response of Veicle Armor Combination Using LS DYNA
Başaran G., GÜRSES E.
11th European LS DYNA Conference, Salzburg, Austria, 9 - 11 May 2017
2016
2016Birden Fazla Kararlı Hale Sahip Elastik Bİr Kirişin Enerji Tuzaklama Miktarını Etkileyen Parametrelerin Belirlenmesi
ZEMBİLÖREN A., GÜRSES E.
8. Savunma Teknolojileri Kongresi Kongresi (SAVTEK), Turkey, 12 - 14 October 2016
2016
2016Bal Peteği Dolguya Sahip Sandviç Yapıların Bükme Yükü Altındaki Davranışlarının Karşılaştırılması
YARDIMCI O., GÜRSES E.
VI. Ulusal Havacılık ve Uzay Konferansı (UHUK), Kocaeli, Turkey, 28 - 30 September 2016
2016
2016Eksenel Kesme ve Moment Yükü Altındaki Flanşlar İçin Yapay Sinir Ağına Dayalı Cıvatalı Flanş Tasarım Aracı Geliştirilmesi
Şanlı V., Akay A. A., Yıldırım A., Gürses E., Çöker D., Kayran A.
VI. Ulusal Havacılık ve Uzay Konferansı (UHUK), Kocaeli, Turkey, 28 - 30 September 2016
2016
2016EXPERIMENTAL AND NUMERICAL INVESTIGATION OF IMPACT INDUCED DAMAGE PROGRESSION IN FIBER REINFORCED COMPOSITES
GÜRSES E., Topac T., ÇÖKER D.
ICTAM 2016, Montreal, Canada, 21 - 26 August 2016
2016
2016EXPERIMENTAL AND COMPUTATIONAL STUDY OF DAMAGE PROCESS IN CFRP COMPOSITE BEAMS UNDER LOW VELOCITY IMPACT
TOPAÇ Ö. T., GÜRSES E., ÇÖKER D.
17th International Conference on Experimental Mechanics, Rodos, Greece, 3 - 07 July 2016
2016
2016A Hybrid Morphing Trailing Edge Designed for Camber Change of the Control Surface
Tunçöz İ. O., Yang Y., Gürses E., Şahin M., Yaman Y., Özgen S.
SciTech2016, AIAA Science and Technology Forum 2016, California, United States Of America, 4 - 08 January 2016
2016
2016Hybrid Morphing Trailing Edge Designed for Camber Change of the Control Surface Change
TUNÇÖZ İ. O., YANG Y., GÜRSES E., ŞAHİN M., ÖZGEN S., YAMAN Y.
AIAA Scitech, 4 - 08 January 2016
2016
2016Hybrid morphing trailing edge designed for camber change of the control surface
Tunçöz İ. O., Yang Y., Gürses E., Şahin M., Özgen S., Yaman Y.
24th AIAA/AHS Adaptive Structures Conference, 2016, California, United States Of America, 4 - 08 January 2016
2015
2015IMECE2015 51021 DEVELOPMENT OF BOLTED FLANGE DESIGN TOOL BASED ON FINITE ELEMENT ANALYSIS AND ARTIFICIAL NEURAL NETWORK
yıldırım a., hasan g., AKAY A. A., GÜRSES E., ÇÖKER D., KAYRAN A.
IMECE2015 - ASME 2015 International Mechanical Engineering Congress & Exposition, Houston, 13 - 19 November 2015
2015
2015DEVELOPMENT OF BOLTED FLANGE DESIGN TOOL BASED ON FINITE ELEMENT ANALYSIS AND ARTIFICIAL NEURAL NETWORK
Yildirim A., Kayran A., Gulasik H., Çöker D., Gürses E., Kayran A.
ASME International Mechanical Engineering Congress and Exposition (IMECE2015), Texas, United States Of America, 13 - 19 November 2015
2015
2015Experimental and numerical investigation of damage interaction mechanism in composites under dynamic transverse loading
Topac O., Burak G., GÜRSES E., ÇÖKER D.
SES 52nd Annual Technical Meeting, College Park, United States Of America, 26 - 28 October 2015
2015
2015Failure Initiation and Progression in 0 90 CFRP Composite Beams Subject to Out of Plane Low velocity Impact
ÇÖKER D., Topaç Ö. T., GÜRSES E.
Society of Engineering Science 52nd Annual Technical Meeting, College Park, United States Of America, 26 - 28 October 2015
2015
2015Büyük Oranda Şekil Değiştirebilen Bir Hibrid Firar Kenarı Kontrol Yüzeyinin Tasarımı ve Analizleri
İlhan Ozan T., Yosheph Y., Gürses E., Şahin M., Özgen S., Yaman Y.
UHAT2015, III. Ulusal Havacılık Teknolojisi ve Uygulamaları Kongresi, İzmir, Turkey, 23 - 24 October 2015
2015
2015Modeling of a Three-Dimensional Spherulite Microstructure in Semicrystalline Polymers
Oktay H. E., Gürses E.
European Conference on Numerical Mathematics and Advanced Applications (ENUMATH), Ankara, Turkey, 14 - 18 September 2015, vol.112, pp.567-575
2015
2015Finite Element Modeling of Three Dimensional Spherulite Microstructures
Oktay H. E., Gürses E.
European Conference on Numerical Mathematics and Advanced Applications (ENUMATH), Ankara, Turkey, 14 - 18 September 2015
2015
2015Design and Analysis of an Unmanned Aerial Vehicle Hybrid Trailing Edge Control Surface Having Camber and Decamber Capabilities
Topaç Ö. T., Taşdemir B., GÜRSES E., ÇÖKER D.
8th Ankara International Aerospace Conference, Ankara, Turkey, 10 - 12 September 2015
2015
20153D Numerical Simulation of Nonenergetic Reactive Armor
Saeidi F., Kurt M. C., Gürses E., Çöker D.
8th Ankara International Aerospace Conference, Ankara, Turkey, 10 - 12 September 2015
2015
2015Experimental Investigation of Impact Induced Failure Process in CFRP Composite Laminates
Topaç Ö. T., Taşdemir B., GÜRSES E., ÇÖKER D.
8th Ankara International Aerospace Conference, Ankara, Turkey, 10 - 12 September 2015
2015
2015PARAMETERS CORRELATION STUDY TO INVESTIGATE THE EFFECTS OF GEOMETRIC VARIABLES ON THE SAFETY OF BOLTED FLANGE CONNECTIONS
Yildirim A., Akay A. A., Gulasik H., Çöker D., Gürses E., Kayran A.
8th Ankarar International Aerospace Conference, Ankara, Turkey, 10 - 12 September 2015
2015
2015MODELING OF A CIRCULAR DOUBLE FLANGE JOINT INCLUDING CONTACT AND FRICTION EFFECTS
Akay A. A., Gulasik H., Yildirim A., Çöker D., Kayran A., Gürses E.
8th Ankara International Aerospcae Conference, Ankara, Turkey, 10 - 12 September 2015
2015
2015PARAMETRIC STUDY FOR THE STUDY OF THE EFFECT OF CONTACT PARAMETERS FOR PLASTIC ANALYSIS OF BOLTED FLANGE CONNECTIONS
Yilmaz S. E., Kayran A., Gürses E., Çöker D.
8th Ankara International Aerospace Conference, Ankara, Turkey, 10 - 12 September 2015
2015
2015Modeling of Circular Double Flange Joint Including Contact and Friction Effects
AKAY A. A., Gülaşık H., Yıldırım A., ÇÖKER D., KAYRAN A., GÜRSES E.
8th Ankara International Aerospace Conference-AIAC, Ankara, Turkey, 10 - 12 September 2015
2015
2015Design and Analyses of an Unmanned Aerial Vehicle Hybrid Trailing Edge Control Surface Having Camber and Decamber Capabilities
İlhan Ozan T., Yosheph Y., Gürses E., Şahin M., Özgen S., Yaman Y.
AIAC2015, 8th Ankara International Aerospace Conference, Ankara, Turkey, 10 - 12 September 2015
2015
2015Numerical investigation of impact induced damage progression in composites and correlations with experiments
Topac O., Burak G., GÜRSES E., ÇÖKER D.
5th ECCOMAS Thematic Conference on the Mechanical Response of Composites, Bristol, United Kingdom, 7 - 09 September 2015
2015
2015Finite Element Modeling of Textured Surfaces of Ultra High Molecular Weight Tibial Insert
Oktay H. E., Gürses E.
9th European Solid Mechanics Conference ESMC 2015, Madrid, Spain, 6 - 10 July 2015
2015
2015Hibrit Bir Kontrol Yüzeyinin Hesaplamalı Akışkanlar Dinamiği Destekli Yapısal Analizi
Arslan P., Uğur K., Harun T., İlhan Ozan T., Yosheph Y., Özgen S., et al.
UMTS2015, Uluslararası Katılımlı 17. Makina Teorisi Sempozyumu, İzmir, Turkey, 14 - 17 June 2015
2015
2015Experimental and Computational Investigation of Out-of-Plane Low Velocity Impact Behavior of CFRP Composite Plates
Topac O. T., Tasdemir B., Gozluklu B., GÜRSES E., ÇÖKER D.
Annual Conference and Exposition of Society-for-Experimental-Mechanics on Experimental and Applied Mechanics, California, United States Of America, 8 - 11 June 2015, vol.8, pp.9-16
2015
2015Experimental and computational investigation of out of plane low velocity impact behaviour of CFRP composite plates
Topaç Ö. T., Taşdemir B., Gözlüklü B., GÜRSES E., ÇÖKER D.
SEM 2015 Conference & Exposition, Costa Mesa, CA, United States Of America, 8 - 11 June 2015
2015
2015A Hybrid Control Surface Capable of Camber and Decamber Morphing
Tunçöz İ. O., Yang Y., GÜRSES E., ŞAHİN M., ÖZGEN S., YAMAN Y.
7th Eccomas Thematic Conference on Smart Structures and Materials, Ponte Delgada, Portugal, 3 - 06 June 2015
2015
2015A Hybrid Trailing Edge Control Surface Capable of Camber and Decamber Morphing
İlhan Ozan T., Yosheph Y., Gürses E., Şahin M., Özgen S., Yaman Y.
SMART2015, 7th ECCOMAS Thematic Conference on Smart Structures and Materials, Ponta-Delgada, Portugal, 3 - 06 June 2015
2015
2015Bir Hibrit Firar Kenarı Kontrol Yüzeyinin Tasarımı ve Analizi
Arslan P., Uğur K., Harun T., İlhan Ozan T., Yosheph Y., Gürses E., et al.
TMMOB Makina Mühendisleri Odası, VIII. Ulusal Uçak, Havacılık ve Uzay Mühendisliği Kurultayı, Eskişehir, Turkey, 22 - 23 May 2015
2015
2015Design of Experiments Study for Determination for the Study of the Effect of Contact Parameters in Bolted Flange Connections
Yılmaz S. E., Özcihan T., Kayran A., Gürses E., Çöker D.
International Conference on Advances in Mechanical Engineering (ICAME 2015), İstanbul, Turkey, 13 - 15 May 2015
2015
2015Low velocity impact damage on laminated composites simulations and correlations with tests
Topac O., Gozluklu B., GÜRSES E., ÇÖKER D.
International Conference on Advances in Composite Materials and Structures, İstanbul, Turkey, 13 - 15 April 2015
2014
2014Structural Analysis of an Unconventional Hybrid Control Surface of a Morphing Wing
Arslan P., Uğur K., Harun T., İlhan Ozan T., Yosheph Y., Gürses E., et al.
ICAST2014: 25th International Conference on Adaptive Structures and Technologies, The Hague, Netherlands, 6 - 08 October 2014
2014
2014Katmanlı Kompozitlerde Düşük Hızlı Darbe Davranış Analizi
Topaç Ö. T., Taşdemir B., GÜRSES E., ÇÖKER D.
V. Ulusal Havacılık ve Uzay Konferansı (UHUK), Kayseri, Turkey, 8 - 10 September 2014
2014
2014Konvansiyonel Olmayan İki Farklı Kontrol Yüzeyinin Yapısal Özelliklerinin Değerlendirilmesi ve Karşılaştırılması
Arslan P., Uğur K., Harun T., İlhan Ozan T., Yosheph Y., Gürses E., et al.
UHUK2014, V. Ulusal Havacılık ve Uzay Konferansı, Kayseri, Turkey, 8 - 10 September 2014
2014
2014Modeling of Spherulite Microstructures in Semicrystalline Polymers
Oktay H. E., Gürses E.
IUTAM Symposium on Innovative Numerical Approaches for Materials and Structures in Multi-Field and Multi-Scale Problems, Siegen, Germany, 1 - 04 September 2014
2014
2014Konvansiyonel ve Konvansiyonel Olmayan Kontrol Yüzeyine Sahip İnsansız Hava Aracı Kanatlarının Aerodinamik Özelliklerinin Değerlendirilmesi
Topaç Ö. T., Taşdemir B., GÜRSES E., ÇÖKER D.
7. Savunma Teknolojileri Kongresi Kongresi SAVTEK 2014, Ankara, Turkey, 25 - 27 June 2014
2014
2014Konvansiyonel ve Konvansiyonel Olmayan Kontrol Yüzeyine Sahip İnsansız Hava Aracı Kanatlarının Ağırlıklarının İncelenmesi
Topaç Ö. T., Taşdemir B., GÜRSES E., ÇÖKER D.
7. Savunma Teknolojileri Kongresi Kongresi SAVTEK 2014, Ankara, Turkey, 25 - 27 June 2014
2014
2014Çukur İmla Şişen Zırh Etkileşiminin Sayısal Yöntemlerle İncelenmesi
Kurt M. C., Saeidi F., Gürses E., Çöker D.
7. Savunma Teknolojileri Kongresi Kongresi SAVTEK 2014, Ankara, Turkey, 25 - 27 June 2014
2014
2014Konvansiyonel ve Konvansiyonel Olmayan Kontrol Yüzeylerine Sahip İnsansız Hava Aracı Kanatlarının Aerodinamik Özelliklerinin Değerlendirilmesi
İlhan Ozan T., Yosheph Y., Özgen S., Gürses E., Şahin M., Yaman Y.
SAVTEK2014, 7. Savunma Teknolojileri Kongresi, Ankara, Turkey, 25 - 27 June 2014
2014
2014Konvansiyonel ve Konvansiyonel Olmayan Kontrol Yüzeylerine Sahip İnsansız Hava Aracı Kanatlarının Ağırlıklarının İncelenmesi
Arslan P., Uğur K., Harun T., Gürses E., Şahin M., Özgen S., et al.
SAVTEK2014, 7. Savunma Teknolojileri Kongresi, Ankara, Turkey, 25 - 27 June 2014
2014
2014Bir İnsansız Hava Aracının Konvansiyonel Olmayan Esnek Kontrol Yüzeylerinin Yapısal Analizi ve İç Yapısının Tasarımı
Arslan P., Uğur K., Harun T., İlhan Ozan T., Yosheph Y., Gürses E., et al.
HİTEK2014, 3. Havacılıkta İleri Teknolojiler Konferansı, İstanbul, Turkey, 18 - 20 June 2014
2014
2014Microstructural Modeling of Semicrystalline Polymers
Oktay H. E., Gürses E.
IUTAM Symposium on Micromechanics of Defects in Solids, Sevilla, Spain, 9 - 13 June 2014
2014
2014A Hybrid Trailing Edge Control Surface Concept
Arslan P., Uğur K., Harun T., İlhan Ozan T., Yosheph Y., Gürses E., et al.
DeMEASS-VI, 6th Conference for Design, Modelling and Experiments of Advanced Structures and Systems, The Hague, Netherlands, 25 - 28 May 2014
2013
2013Büyük Oranda Şekil Değiştirebilen Kanat Yüzeylerinin Aerodinamik Yükler Altındaki Davranışları
Arslan P., Kalkan U., Tıraş H., Tunçöz İ. O., Yang Y., Gürses E., et al.
2. Ulusal Havacılık Teknolojisi ve Uygulamaları Kongresi UHAT, İzmir, Turkey, 29 - 30 November 2013
2013
2013Büyük Oranda Şekil Değiştirebilen Kanat Yüzeylerinin Aerodinamik Yükler Altında Davranışları
Arslan P., Uğur K., Yosheph Y., Özgen S., Şahin M., Gürses E., et al.
UHAT2013, II. Ulusal Havacılık Teknolojisi ve Uygulamaları Kongresi, İzmir, Turkey, 29 - 30 November 2013
2013
2013Büyük Oranda Şekil Değiştirebilen Kontrol Yüzeylerinin Yapısal Özelliklerinin Değerlendirilmesi
Harun T., İlhan Ozan T., Gürses E., Şahin M., Özgen S., Yaman Y.
UHAT2013, II. Ulusal Havacılık Teknolojisi ve Uygulamaları Kongresi, İzmir, Turkey, 29 - 30 November 2013
2013
2013A Three Dimensional Model for Nanocrystalline Materials based on Grain Interior and Grain Boundary Deformation Mechanisms
GÜRSES E.
COMPLAS XII - Computational Plasticity, Barselona, Spain, 3 - 05 September 2013
2013
2013Yarı Kristal Polimer Malzemelerin Çok Ölçekli Modellenmesi
Oktay H. E., Gürses E.
XVIII. Ulusal Mekanik Kongresi, Manisa, Turkey, 26 - 30 August 2013
2012
2012Büyük Oranda Şekil Değiştirebilen Kanat Kontrol Yüzeylerinin Uçuştaki Etkileri
Yaman Y., Özgen S., Şahin M., Gürses E.
UHAT2012, I. Ulusal Havacılık Teknolojisi ve Uygulamaları Kongresi, İzmir, Turkey, 20 - 22 December 2012
2012
2012Modeling of Nanocrystalline Metals based on Competing Grain Boundary and Grain Interior Deformation Mechanisms
GÜRSES E., EL SAYED T.
ICTAM - 23rd International Congress of Theoretical and Applied Mechanics, Pekin, China, 19 August - 24 October 2012
2012
2012Multiscale Modeling of Nanocrystalline Metals based on Competing Grain Boundary and Grain Interior Deformation Mechanisms
GÜRSES E.
1st International Workshop on Physics based Modelling of Material Properties and Experimental Observations, Ankara, Turkey, 22 - 23 October 2012
2012
2012Constitutive Modeling of Nanocrystalline Metals based on Competing Grain Boundary and Grain Interior Deformation Mechanisms
GÜRSES E., EL SAYED T.
ECCOMAS - European Congress on Computational Methods in Applied Sciences and Engineering, Viyana, Austria, 10 - 14 September 2012
2011
2011Multiscale Modeling of Nanocrystalline Materials A Variational Approach
Birkle M., GÜRSES E., Miehe C.
82nd Annual Meeting of Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Graz, Austria, 18 - 21 April 2011, vol.11, pp.511-512
2011
2011Softening in Nanocrystalline Metals Modeling of Grain Growth Induced Creep and Relaxation
Birkle M., GÜRSES E., Miehe C.
82nd Annual Meeting of Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Graz, Austria, 18 - 21 April 2011, vol.11, pp.377-378
2010
2010A Variational Constitutive Model of Void Growth in Single and Polycrystals Application to Ultrafine Grained and Nanocrystalline Materials
GÜRSES E., EL SAYED T.
9th World Congress on Computational Mechanics (WCCM), Sidney, Australia, 19 - 23 July 2010
2010
2010A Variational Constitutive Model for Void Growth in Crystals Application to Nanocrystals
GÜRSES E., EL SAYED T.
IV European Conference on Computational Mechanics (ECCM), Paris, France, 16 - 21 May 2010
2009
2009Multiscale Modeling of High Energetic Materials under Impact Loads
RIMOLI J., GÜRSES E., ORTIZ M.
10th US National Congress on Computational Mechanics, Columbus, United States Of America, 16 - 19 July 2009
2007
2007A Computational Framework of Three Dimensional Configurational Force Driven Brittle Crack Propagation
Birkle M., GÜRSES E., Miehe C.
78th Annual Meeting of Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Zürich, Switzerland, 16 - 20 July 2007, vol.7, pp.4030019-4030020
2006
2006A Robust Adaptive Algorithm for Material Force Driven Brittle Fracture Based on Incremental Energy Minimization
Miehe C., GÜRSES E., Zimmermann D.
6th European Solid Mechanics Conference, Budapest, Hungary, 28 August - 01 September 2006
2006
2006Robust Algorithm for Brittle Fracture based on Energy Minimization
GÜRSES E., Miehe C.
77th Annual Meeting of Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Berlin, Germany, 27 - 31 March 2006, vol.6, pp.167-168
2006
2006On Variational Based Scale Bridging of Inelastic Composites
Birkle M., GÜRSES E., Miehe C.
77th Annual Meeting of Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Berlin, Germany, 27 - 31 March 2006, vol.6, pp.465-466
2005
2005Deformation Driven Homogenization of Fracturing Solids
Birkle M., GÜRSES E., Miehe C.
76th Annual Meeting of Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Luxembourg, 28 March - 01 April 2005, vol.5, pp.333-334
2004
2004Analysis of Evolving Deformation Microstructures in Instable Inelastic Solids Based on Energy Relaxation Methods
GÜRSES E., Miehe C.
XXI International Congress of Theoretical and Applied Mechanics ICTAM, Varşova, Poland, 15 - 21 August 2004
2004
2004Numerical Computation of Anisotropically Evolving Yield Surfaces Based on Micro to Macro Transitions
Birkle M., GÜRSES E., Miehe C.
75th Annual Meeting of Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Dresden, Germany, 21 - 26 March 2004, vol.4, pp.219-220
2003
2003Relaxation Analysis of Material Instabilities in Damage Mechanics Based on Incremental Convexification Techniques
Lambrecht M., GÜRSES E., Miehe C.
VII International Conference on Computational Plasticity, COMPLAS, Barcelona, Spain, 7 - 10 April 2003
2003
2003Application of Relaxation Techniques to Nonconvex Isotropic Damage Model
Birkle M., GÜRSES E., Miehe C.
74th Annual Meeting of Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Abano Terme, Italy, 24 - 28 March 2003, vol.3, pp.222-223
Books & Book Chapters
2016
2016Modeling of a Three-Dimensional Spherulite Microstructure in Semicrystalline Polymers
Oktay H. E., Gürses E.
in: Numerical Mathematics and Advanced Applications, M. Manguoğlu,M. Tezer-Sezgin,S. Göktepe,Ö. Uğur, Editor, Springer, London/Berlin , Berlin, pp.567-574, 2016
2016
2016Experimental and Computational Investigation of Out-of-Plane Low Velocity Impact Behavior of CFRP Composite Plates
Topac T., Tasdemir B., Gozluklu B., GÜRSES E., ÇÖKER D.
in: Fracture Fatigue Failure and Damage Evolution Volume 8, Allison M. Beese, Alan T. Zehnder, Shuman Xia, Editor, Springer, pp.9-16, 2016
2006
2006Analytical and Numerical Methods for Finite Strain Elastoplasticity
GÜRSES E., MAINIK A., MIEHE C., MIELKE A.
in: Multifield problems in Fluid and Solid Mechanics, Helmig, R., Mielke, A., Wohlmuth, B., Editor, Springer, pp.491-529, 2006
Episodes in the Encyclopedia
2020
2020A Numerical Approach to Simulate Oxidation in Thermal Barrier Coatings
Saeidi F., Gürses E., Aslan Ö.
Elsevier Science, Oxford/Amsterdam , pp.986-992, 2020
Supported Projects
2017 - 2022
2017 - 2022ODTÜ-TAİ VLA projesi 1. faz
Company
(Project Abstract)
Kurtuluş D. F., Tekinalp O. (Executive), Kayran A., Yaman Y., Gürses E., Çöker D., et al.
2018 - 2020
2018 - 2020Gömülü Eleman Yöntemi Ile Doğrusal Olmayan Malzeme Davranışı Gösteren Kompozit Malzemelerin Mekanik Davranışının Modellenmesi
TUBITAK Project
Gürses E., Sabuncuoğlu B.(Executive)
2015 - 2018
2015 - 2018Karbon Nanotüp İle Güçlendirilmiş Polimer Kompozitlerin Çok Ölçekli Modellenmesi
TUBITAK Project
GÜRSES E. (Executive), GÖKTEPE S.
2014 - 2017
2014 - 2017Flanş İleri Analiz Arayüzü ve Tasarım Programı Oluşturulması
Industrial Thesis Project
GÜRSES E. (Executive)
2012 - 2016
2012 - 2016CHANGE Combined morpHing Assessment software usiNG flight Envelope data and mission based morphing prototype wing development
FP7 Project
Gürses E., Yaman Y. (Executive), Şahin M., Özgen S.
2013 - 2015
2013 - 2015Sıkı Dizilimli Hegzagonel Yapısal Metallerde Temel Deformasyon Fiziğinin Çok Ölçekli Tam Saha Gerinim Ölçümleriyle Yük Altında Incelenmesi
TUBITAK Project
Gürses E., Aydıner C. C.(Executive)
2013 - 2014
2013 - 2014ŞİŞEN ZIRH ARA KATMAN MALZEMESİNİN ZIRH PERFORMANSI ÜZERİNE ETKİSİ VE ZIRH OPTİMİZASYONUNA YÖNELİK MALZEME İSTERLERİNİN OLUŞTURULMASI PROJESİ
Company
Gürses E. (Executive)
2012 - 2014
2012 - 2014Ultra Yüksek Moleküler Ağırlıklı Polietilenin Çok Ölçekli Modellenmesi
TUBITAK Project
GÜRSES E. (Executive)
Scientific Refereeing
February 2024
February 2024INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
Journal Indexed in SCI-E
February 2024
February 2024TEKNIK DERGI/TECHNICAL JOURNAL OF TURKISH CHAMBER OF CIVIL ENGINEERS
SCI Journal
January 2024
January 2024INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
Journal Indexed in SCI-E
January 2024
January 2024MEASUREMENT
SCI Journal
December 2023
December 2023ENGINEERING FRACTURE MECHANICS
Journal Indexed in SCI-E
November 2023
November 2023Engineering Structures
Journal Indexed in SCI-E
September 2023
September 2023FRATTURA ED INTEGRITA STRUTTURALE
Journal Indexed in ESCI
April 2023
April 2023POLYMER BULLETIN
Journal Indexed in SCI-E
January 2023
January 2023Engineering Structures
Journal Indexed in SCI-E
January 2023
January 2023Frontiers in Materials
Journal Indexed in SCI-E
August 2022
August 2022JOURNAL OF COMPOSITE MATERIALS
Journal Indexed in SCI-E
May 2022
May 2022AIP ADVANCES
Journal Indexed in SCI-E
May 2022
May 2022Engineering Structures
Journal Indexed in SCI-E
May 2022
May 2022PHYSICAL MESOMECHANICS
Journal Indexed in SCI-E
April 2022
April 2022Gazi Mühendislik Bilimleri Dergisi
Other Indexed Journal
February 2022
February 2022Engineering Structures
Journal Indexed in SCI-E
December 2021
December 2021COMPUTATIONAL MATERIALS SCIENCE
Journal Indexed in SCI-E
December 2021
December 2021MECHANICS OF MATERIALS
Journal Indexed in SCI-E
November 2021
November 2021TUBITAK Project
1003 - Priority Areas R&D Projects Support Program, Sabanci University, Turkey
October 2021
October 2021TUBITAK Project
3501 - National Young Researcher Career Development Program, Middle East Technical University, Turkey
September 2021
September 20212nd International Workshop on Plasticity, Damage and Fracture of Engineering Materials
Conference Paper (Full Text)
September 2021
September 20212nd International Workshop on Plasticity, Damage and Fracture of Engineering Materials
Conference Paper (Full Text)
September 2021
September 20212nd International Workshop on Plasticity, Damage and Fracture of Engineering Materials
Conference Paper (Full Text)
September 2021
September 20212nd International Workshop on Plasticity, Damage and Fracture of Engineering Materials
Conference Paper (Full Text)
September 2021
September 20212nd International Workshop on Plasticity, Damage and Fracture of Engineering Materials
Conference Paper (Full Text)
September 2021
September 20212nd International Workshop on Plasticity, Damage and Fracture of Engineering Materials
Conference Paper (Full Text)
September 2021
September 20212nd International Workshop on Plasticity, Damage and Fracture of Engineering Materials
Conference Paper (Full Text)
September 2021
September 20212nd International Workshop on Plasticity, Damage and Fracture of Engineering Materials
Conference Paper (Full Text)
September 2021
September 2021ARCHIVE OF APPLIED MECHANICS
Journal Indexed in SCI-E
September 2021
September 20212nd International Workshop on Plasticity, Damage and Fracture of Engineering Materials
Conference Paper (Full Text)
August 2021
August 2021JOURNAL OF COMPOSITE MATERIALS
Journal Indexed in SCI-E
August 2021
August 2021JOURNAL OF COMPOSITE MATERIALS
Journal Indexed in SCI-E
August 2021
August 2021TUBITAK Project
3501 - National Young Researcher Career Development Program, Erciyes University, Turkey
July 2021
July 2021TUBITAK Project
1003 - Priority Areas R&D Projects Support Program, Sabanci University, Turkey
March 2021
March 2021FRATTURA ED INTEGRITA STRUTTURALE
Other Indexed Journal
March 2021
March 2021ARCHIVE OF APPLIED MECHANICS
Journal Indexed in SCI-E
January 2021
January 2021INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
Journal Indexed in SCI-E
January 2021
January 2021Engineering Structures
Journal Indexed in SCI-E
December 2020
December 2020Engineering Structures
Journal Indexed in SCI-E
October 2020
October 2020Engineering Structures
Journal Indexed in SCI-E
May 2020
May 2020Engineering Computations
Journal Indexed in SCI-E
March 2020
March 2020FRONTIERS IN MATERIALS
Journal Indexed in SCI-E
March 2020
March 2020POLYMER COMPOSITES
Journal Indexed in SCI-E
March 2020
March 2020TUBITAK Project
1001 - Program for Supporting Scientific and Technological Research Projects, Erciyes University, Turkey
February 2020
February 2020JOURNAL OF COMPOSITE MATERIALS
Journal Indexed in SCI-E
January 2020
January 2020FRONTIERS IN MATERIALS
Journal Indexed in SCI-E
January 2020
January 2020TUBITAK Project
3501 - National Young Researcher Career Development Program, Erciyes University, Turkey
September 2019
September 2019AIP Advances
Journal Indexed in SCI-E
June 2019
June 2019Mechanics Of Materials
Journal Indexed in SCI-E
June 2019
June 2019JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY
Journal Indexed in SCI-E
May 2019
May 2019FRONTIERS IN MATERIALS
Journal Indexed in SCI-E
April 2019
April 2019Computational Materials Science
Journal Indexed in SCI-E
March 2019
March 2019FRONTIERS IN MATERIALS
Journal Indexed in SCI-E
March 2019
March 2019FRONTIERS IN MATERIALS
Journal Indexed in SCI-E
March 2019
March 2019FRONTIERS IN MATERIALS
Journal Indexed in SCI-E
March 2019
March 2019TUBITAK Project
1003 - Priority Areas R&D Projects Support Program, Middle East Technical University, Turkey
March 2019
March 2019TUBITAK Project
1003 - Priority Areas R&D Projects Support Program, Sabanci University, Turkey
March 2019
March 2019TUBITAK Project
1003 - Priority Areas R&D Projects Support Program, Karamanoglu Mehmetbey University, Turkey
March 2019
March 2019TUBITAK Project
1003 - Priority Areas R&D Projects Support Program, University Of Turkish Aeronautical Association, Turkey
November 2018
November 2018Journal of Aeronautics and Space Technologies
Other Journals
November 2018
November 2018JOURNAL OF COMPOSITE MATERIALS
SCI Journal
Tasks In Event Organizations
Eylül 2021
Eylül 202111th ANKARA INTERNATIONAL AEROSPACE CONFERENCE
Scientific Congress
Söken H. E., Tuncer I. H., Gürses E., Kayran A., Kahveci H. S.
Ankara, Turkey
Ağustos 2021
Ağustos 20212nd International Workshop on Plasticity, Damage and Fracture of Engineering Materials
Scientific Congress
Yalçınkaya T., Gürses E.
Ankara, Turkey
Eylül 2019
Eylül 201910th Ankara International Aerospace Conference (AIAC2019)
Scientific Congress
Tuncer İ. H., Yaman Y., Kayran A., Uzol O., Gürses E., Perçin M.
Ankara, Turkey
Ağustos 2019
Ağustos 2019