Yayınlar & Eserler

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Fibre Bragg grating sensor applications for structural health monitoring

AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY, cilt.92, ss.355-367, 2018 (SCI İndekslerine Giren Dergi) identifier identifier

Active neuro-adaptive vibration suppression of a smart beam

SMART STRUCTURES AND SYSTEMS, cilt.20, ss.657-668, 2017 (SCI İndekslerine Giren Dergi) identifier identifier

Structural and aerodynamic analyses of a hybrid trailing edge control surface of a fully morphing wing

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, cilt.28, ss.979-991, 2017 (SCI İndekslerine Giren Dergi) identifier identifier

Bimorph piezoelectric energy harvester structurally integrated on a trapezoidal plate

SMART STRUCTURES AND SYSTEMS, cilt.18, ss.249-265, 2016 (SCI İndekslerine Giren Dergi) identifier identifier

Fractional controller design for suppressing smart beam vibrations

AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY, cilt.84, ss.203-212, 2012 (SCI İndekslerine Giren Dergi) Creative Commons License identifier identifier

Performance evaluation of piezoelectric sensor/actuator on active vibration control of a smart beam

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART I-JOURNAL OF SYSTEMS AND CONTROL ENGINEERING, cilt.225, ss.533-547, 2011 (SCI İndekslerine Giren Dergi) identifier identifier

Spatial control of a smart beam

JOURNAL OF ELECTROCERAMICS, cilt.20, ss.175-185, 2008 (SCI İndekslerine Giren Dergi) identifier identifier

A procedure to embed fibre Bragg grating strain sensors into GFRP sandwich structures

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, cilt.38, ss.217-226, 2007 (SCI İndekslerine Giren Dergi) identifier identifier

Stress distribution of post-core applications in maxillary central incisors

JOURNAL OF BIOMATERIALS APPLICATIONS, cilt.18, ss.163-177, 2004 (SCI İndekslerine Giren Dergi) identifier identifier identifier

Vibration-based damage identification in beam-like composite laminates by using artificial neural networks

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, cilt.217, ss.661-676, 2003 (SCI İndekslerine Giren Dergi) identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Comparison of Performance of Surface Mounted and Embedded Fibre Bragg Grating Sensors under Fatigue Torsion Load

SICASE 2019, 6th Seoul International Conference on Applied Science and Engineering, Seoul, Güney Kore, 21 - 23 Mayıs 2019

Extended Abstract: Dynamic Behavior of a Compliant Mechanism Driven by Stacked Piezoelectric Actuators

36th IMAC Conference and Exposition on Structural Dynamics, Florida, Amerika Birleşik Devletleri, 12 - 15 Şubat 2018, ss.77-79 identifier identifier

FIBER BRAGG GRATING SENSOR APPLICATIONS FOR STRUCTURAL HEALTH MONITORING

7th EASN International Conference on Innovation in European Aeronautics Research, 26 - 29 Eylül 2017 identifier identifier

Gain-Scheduling H∞ Control of a Smart Beam with Parameter Varying

SMART2017, VIII.ECCOMAS Thematic Conference on Smart Structures and Materials, Madrid, İspanya, 5 - 06 Haziran 2017, ss.1-10

GAIN-SCHEDULING H∞ CONTROL OF A SMART BEAM WITH PARAMETER VARYING

8th Conference on Smart Structures and Materials SMART 2017, 5 - 08 Haziran 2017 identifier

Design optimization, control and experimental characterization of flapper mechanism with amplified piezo actuator

3 rd International Conference on Smart Materials Structures, Amerika Birleşik Devletleri, 20 - 22 Mart 2017

Structural Health Monitoring system of composite beams with surface bonded and embedded Fibre Bragg Grating sensors

International Symposium on Material Science and Engineering, ISMSE 2017, Kuala-Lumpur, Malezya, 13 - 15 Ocak 2017, cilt.744, ss.332-336 identifier

Kompozit Yapılarda Fiber Optik Algılayıcıların Yarattığı Gerilme Yığılmalarının İncelenmesi

UHUK2016, VI. Ulusal Havacılık ve Uzay Konferansı, Kocaeli, Türkiye, 28 - 30 Eylül 2016

Güçlendirilmiş Bir Kompozit Kiriş Tasarımı

UHUK2016, VI. Ulusal Havacılık ve Uzay Konferansı, Kocaeli, Türkiye, 28 - 30 Eylül 2016

Active Vibration Suppression of a Smart Beam via a Controller Designed by Using Linear Quadratic Regulator Method

The Sixth International Conference onStructural Engineering, Mechanics and Computation, 5 - 07 Eylül 2016 identifier

Active Vibration Control of a Smart Sandwich Plate

The Sixth International Conference onStructural Engineering, Mechanics and Computation, 5 - 07 Eylül 2016 identifier

Modal Analyses and Experimental Verifications of Joined-Wing Configurations

34th IMAC Conference and Exposition on Structural Dynamics, Florida, Amerika Birleşik Devletleri, 25 - 28 Ocak 2016, ss.87-102 identifier identifier

A Hybrid Morphing Trailing Edge Designed for Camber Change of the Control Surface

SciTech2016, AIAA Science and Technology Forum 2016, California, Amerika Birleşik Devletleri, 4 - 08 Ocak 2016

Hybrid morphing trailing edge designed for camber change of the control surface

24th AIAA/AHS Adaptive Structures Conference, 2016, California, Amerika Birleşik Devletleri, 4 - 08 Ocak 2016 identifier

Büyük Oranda Şekil Değiştirebilen Bir Hibrid Firar Kenarı Kontrol Yüzeyinin Tasarımı ve Analizleri

UHAT2015, III. Ulusal Havacılık Teknolojisi ve Uygulamaları Kongresi, İzmir, Türkiye, 23 - 24 Ekim 2015

System Identification of A Composite Sandwich Plate For Active Vibration Control Applications

AIAC2015, 8th Ankara International Aerospace Conference, 10 - 12 Eylül 2015

Hibrit Bir Kontrol Yüzeyinin Hesaplamalı Akışkanlar Dinamiği Destekli Yapısal Analizi

UMTS2015, Uluslararası Katılımlı 17. Makina Teorisi Sempozyumu, İzmir, Türkiye, 14 - 17 Haziran 2015

A Hybrid Trailing Edge Control Surface Capable of Camber and Decamber Morphing

SMART2015, 7th ECCOMAS Thematic Conference on Smart Structures and Materials, Ponta-Delgada, Portekiz, 3 - 06 Haziran 2015

A Hybrid Control Surface Capable of Camber and Decamber Morphing

7th Eccomas Thematic Conference on Smart Structures and Materials, Ponte Delgada, Portekiz, 3 - 06 Haziran 2015

Bir Hibrit Firar Kenarı Kontrol Yüzeyinin Tasarımı ve Analizi

TMMOB Makina Mühendisleri Odası, VIII. Ulusal Uçak, Havacılık ve Uzay Mühendisliği Kurultayı, Eskişehir, Türkiye, 22 - 23 Mayıs 2015

STRUCTURAL OPTIMIZATION OF JOINED WING KIT CONFIGURATIONS UNDER AERODYNAMIC LOAD

62nd CASI Aeronautics Conference and AGM 3rd GARDN Conference, 18 - 21 Mayıs 2015

Multi Objective Optimization of Transducers used in Modal Test of an Unmanned Aerial Vehicle Wing

International Conference on Advances in Vibrations, Vibrations2015, 30 Mart - 01 Nisan 2015

Parameter Identification of Riveted Joints Using Vibration Methods

33rd IMAC Conference and Exposition on Structural Dynamics, Florida, Amerika Birleşik Devletleri, 2 - 05 Şubat 2015, ss.47-53 identifier identifier

Structural Analysis of an Unconventional Hybrid Control Surface of a Morphing Wing

ICAST2014: 25th International Conference on Adaptive Structures and Technologies, The Hague, Hollanda, 6 - 08 Ekim 2014 identifier

A Hybrid Trailing Edge Control Surface Concept

DeMEASS-VI, 6th Conference for Design, Modelling and Experiments of Advanced Structures and Systems, The Hague, Hollanda, 25 - 28 Mayıs 2014

Büyük Oranda Şekil Değiştirebilen Kanat Yüzeylerinin Aerodinamik Yükler Altındaki Davranışları

2. Ulusal Havacılık Teknolojisi ve Uygulamaları Kongresi UHAT, İzmir, Türkiye, 29 - 30 Kasım 2013

Büyük Oranda Şekil Değiştirebilen Kanat Yüzeylerinin Aerodinamik Yükler Altında Davranışları

UHAT2013, II. Ulusal Havacılık Teknolojisi ve Uygulamaları Kongresi, İzmir, Türkiye, 29 - 30 Kasım 2013

Büyük Oranda Şekil Değiştirebilen Kontrol Yüzeylerinin Yapısal Özelliklerinin Değerlendirilmesi

UHAT2013, II. Ulusal Havacılık Teknolojisi ve Uygulamaları Kongresi, İzmir, Türkiye, 29 - 30 Kasım 2013

Optimal Control of a Smart Beam by Using a Luenberger Observer

ICEAF III, 3rd International Conference of Engineering Against Failure, İSTANKÖY, Yunanistan, 26 - 28 Haziran 2013 identifier

Büyük Oranda Şekil Değiştirebilen Kanat Kontrol Yüzeylerinin Uçuştaki Etkileri

UHAT2012, I. Ulusal Havacılık Teknolojisi ve Uygulamaları Kongresi, İzmir, Türkiye, 20 - 22 Aralık 2012

VERIFICATION OF A FINITE ELEMENT MODEL OF AN UNMANNED AERIAL VEHICLE WING TORQUE BOX VIA EXPERIMENTAL MODAL TESTING

11th ASME Biennial Conference on Engineering Systems Design and Analysis, (ESDA 2012), Nantes, Fransa, 2 - 04 Temmuz 2012, ss.13-19 identifier

Design of an LPV Based Fractional Controller for the Vibration Suppression of a Smart Beam

CANSMART2011, International Workshop on Smart Materials & Structures and NDT in Aerospace, Montreal, Kanada, 2 - 04 Kasım 2011

An Experimental Performance Evaluation for the Suppression of Vibrations of the Second Mode of a Smart Beam

AIAC2011, 6. Ankara International Aerospace Conference, Ankara, Türkiye, 14 - 16 Eylül 2011

Performance Analysis of a Fractional Controller Developed for the Vibration Suppression of a Smart Beam

SMART11, 5th ECCOMAS Thematic Conference on Smart Structures and Materials, Saarbrücken, Almanya, 6 - 08 Temmuz 2011

Active Vibration Suppression of a Smart Beam by Using a Fractional Order Control

2nd ICEAF, 2nd International Conference of Engineering Against Fracture, MİKANOS, Yunanistan, 22 - 24 Haziran 2011

Active Vibration Suppression of a Smart Beam by Using an LQG Control Algorithm

2nd ICEAF, 2nd International Conference of Engineering Against Fracture, MİKANOS, Yunanistan, 22 - 24 Haziran 2011

Akıllı Bir Kirişin Titreşimlerinin Aktif Denetimi İçin PI D ve PID Denetçilerin Değerlendirilmesi

UMTS2011, 15. Ulusal Makina Teorisi Sempozyumu, Niğde, Türkiye, 16 - 18 Haziran 2011

ODTÜ de Yapılan İnsansız Hava Aracı Çalışmaları

TMMOB Makina Mühendisleri Odası, VI. Ulusal Uçak, Havacılık ve Uzay Mühendisliği Kurultayı, Eskişehir, Türkiye, 6 - 07 Mayıs 2011

Active Vibration Suppression of a Smart Beam via PI D Control

IWPMA2010, 7th International Workshop on Piezoelectric Materials and Applications in Actuators, Antalya, Türkiye, 11 - 13 Ekim 2010

Vibration-based Damage Identification in Sandwich Beams using Artificial Neural Networks

10th International Conference on Computational Structures Technology, Valencia, İspanya, 14 - 17 Eylül 2010, cilt.93 identifier

Morphing Air Vehicle Concepts

UVW2010, International Unmanned Vehicle Workshop, İstanbul, Türkiye, 10 - 12 Haziran 2010

Active Vibration Suppression of a Smart Beam Via Self sensing Piezoelectric Actuator

AIAC2009, 5. Ankara International Aerospace Conference, Ankara, Türkiye, 17 - 19 Ağustos 2009

Structural Modeling and Flutter Analysis of Adaptive Camber Wings

AIAC2009, 5. Ankara International Aerospace Conference, Ankara, Türkiye, 17 - 19 Ağustos 2009

Göreve Uyumlu Kanatlara Sahip bir İnsansız Hava Aracının Tasarımı

UMTS2009, 14. Ulusal Makina Teorisi Sempozyumu, GÜZELYURT-KIBRIS, Türkiye, 2 - 04 Temmuz 2009

Evaluation of a Camber Morphing Concept Based on Controlled Flexibility

IFASD2009, International Forum on Aeroelasticity and Structural Dynamics 2009, SEATTLE, Amerika Birleşik Devletleri, 21 - 25 Haziran 2009

ODTÜ de Sürdürülen İnsansız Hava Aracı Çalışmaları

TMMOB Makina Mühendisleri Odası, V. Ulusal Uçak, Havacılık ve Uzay Mühendisliği Kurultayı, Eskişehir, Türkiye, 22 - 23 Mayıs 2009

Değişken Kambura Sahip NACA4412 Kanat Kesitinin 2 Boyutlu Aerodinamik Analizi

2. UHUK, II. Ulusal Havacılık ve Uzay Konferansı, İstanbul, Türkiye, 15 - 17 Ekim 2008

Active Flutter Control of a Smart Fin

ICAST 2008, 19th International Conference on Adaptive Structures and Technologies, ASCONA, İsviçre, 6 - 09 Ekim 2008 identifier

Göreve Uyumlu Kanat Tasarım ve Geliştirme Çalışmaları

SAVTEK 2008, 4. Savunma Teknolojileri Kongresi, Ankara, Türkiye, 26 - 27 Haziran 2008

Application of spatial h∞ control technique for active vibration control of a smart beam

4th International Conference on Informatics in Control, Automation and Robotics, ICINCO 2007, Angers, Fransa, 9 - 12 Mayıs 2007, ss.322-328 identifier

State Space Representation of Smart Structures Under Unsteady Aerodynamic Loading

AIAC2007, 4. Ankara International Aerospace Conference, Ankara, Türkiye, 10 - 12 Eylül 2007

Assessing the feasibility of monitoring the condition of historic tapestries using engineering techniques

7th International Conference on Damage Assessment of Structures (DAMAS 2007), Turin, İtalya, 25 - 27 Haziran 2007, cilt.347, ss.187-188 identifier identifier

Akıllı bir Kirişin Statik Aerodinamik Yükler Altındaki Davranışı

UMTS 2007, 13. Ulusal Makina Teorisi Sempozyumu, Sivas, Türkiye, 7 - 09 Haziran 2007

Application of Spatial Hinf Control Technique for Active Vibration Control of a Smart Beam

ICINCO 2007, 4th International Conference on Informatics in Control, Automation and Robotics, Angers, Fransa, 9 - 12 Mayıs 2007

Application of spatial H-infinity control technique for active vibration control of a smart beam

4th International Conference on Informatics in Control, Automation and Robotics, Angers, Fransa, 9 - 12 Mayıs 2007, ss.322-323 identifier

Smart Structures and Their Applications on Active Vibration Control Studies in the Department of Aerospace Engineering METU

IWPMA 2006, 3rd International Workshop on Piezoelectric Materials and Applications in Actuators, Eskişehir, Türkiye, 18 - 21 Haziran 2006

Spatial Control of a Smart Beam

IWPMA 2006, 3rd International Workshop on Piezoelectric Materials and Applications in Actuators, Eskişehir, Türkiye, 18 - 21 Haziran 2006

Akıllı bir Kirişin Uzamsal Sistem Modelinin Elde Edilmesi

HaSeM’06, Kayseri VI. Havacılık Sempozyumu, Nevşehir, Türkiye, 5 - 07 Mayıs 2005

Damage detection in a sandwich composite beam using wavelet transforms

Smart Structures and Materials 2003 Conference, California, Amerika Birleşik Devletleri, 2 - 06 Mart 2003, cilt.5049, ss.706-717 identifier identifier

Kitap & Kitap Bölümleri

Active Vibration Control of a Smart Beam by Using a Spatial Approach

New Developments in Robotics Automation and Control, Aleksandar Lazinica, Editör, I-Tech Education and Publishing, ss.377-410, 2008

Active Vibration Control of a Smart Beam by Using A Spatial Approach

New Developments in Robotics, Automation and Control, Editor, Editör, ITECH Online, I-Tech Education and Publishing,, Dubrovnik, ss.377-410, 2008

Mechanical Testing and its Role in the Condition Assessment of Tapestries

Tapestry Conservation Principles and Practice, Lennard, F. and Hayward, M., Editör, Elsevier Scientific Publications, ss.227-234, 2006