Yayınlar & Eserler

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Micromechanical modelling of carbon nanotube reinforced composite materials with a functionally graded interphase

Journal of Composite Materials, cilt.53, ss.4337-4348, 2019 (SCI İndekslerine Giren Dergi) identifier identifier

Development of Bolted Flange Design Tool Based on Artificial Neural Network

Journal of Pressure Vessel Technology, Transactions of the ASME, cilt.141, 2019 (SCI İndekslerine Giren Dergi) identifier identifier

A modulus gradient model for an axially loaded inhomogeneous elastic rod

MECCANICA, cilt.53, ss.2573-2584, 2018 (SCI İndekslerine Giren Dergi) identifier identifier

Structural and aerodynamic analyses of a hybrid trailing edge control surface of a fully morphing wing

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, cilt.28, ss.979-991, 2017 (SCI İndekslerine Giren Dergi) identifier identifier

Experimental and computational study of the damage process in CFRP composite beams under low-velocity impact

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, cilt.92, ss.167-182, 2017 (SCI İndekslerine Giren Dergi) identifier identifier

Modeling of spherulite microstructures in semicrystalline polymers

MECHANICS OF MATERIALS, cilt.90, ss.83-101, 2015 (SCI İndekslerine Giren Dergi) identifier identifier

Constitutive modeling of stress-driven grain growth in nanocrystalline metals

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, cilt.21, 2013 (SCI İndekslerine Giren Dergi) identifier identifier

A phenomenological two-phase constitutive model for porous shape memory alloys

COMPUTATIONAL MATERIALS SCIENCE, cilt.60, ss.44-52, 2012 (SCI İndekslerine Giren Dergi) identifier identifier

On evolving deformation microstructures in non-convex partially damaged solids

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, cilt.59, ss.1268-1290, 2011 (SCI İndekslerine Giren Dergi) identifier identifier

Constitutive modeling of strain rate effects in nanocrystalline and ultrafine grained polycrystals

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, cilt.48, ss.1610-1616, 2011 (SCI İndekslerine Giren Dergi) identifier identifier

A variational multiscale constitutive model for nanocrystalline materials

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, cilt.59, ss.732-749, 2011 (SCI İndekslerine Giren Dergi) identifier identifier

On tension-compression asymmetry in ultrafine-grained and nanocrystalline metals

COMPUTATIONAL MATERIALS SCIENCE, cilt.50, ss.639-644, 2010 (SCI İndekslerine Giren Dergi) identifier identifier

A computational framework of three-dimensional configurational-force-driven brittle crack propagation

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, cilt.198, ss.1413-1428, 2009 (SCI İndekslerine Giren Dergi) identifier identifier

A robust algorithm for configurational-force-driven brittle crack propagation with R-adaptive mesh alignment

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, cilt.72, ss.127-155, 2007 (SCI İndekslerine Giren Dergi) identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

Analytical and numerical methods for finite-strain elastoplasticity

Lecture Notes in Applied and Computational Mechanics, cilt.2006, ss.491-529, 2006 (Diğer Kurumların Hakemli Dergileri) identifier

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Structural Analysis and Design on Composite Rocket Motor Case

10th Ankara International Aerospace Conference, Türkiye, 18 - 20 Eylül 2019

Finite Element Modelling of TBC Failure Mechanisms by Using XFEM and CZM

1st International Workshop on Plasticity, Damage and Fracture of Engineering Materials (IWPDF), Ankara, Türkiye, 22 - 23 Ağustos 2019, cilt.21, ss.91-100 identifier identifier

Development of Structural Neural Network Design Tool for Buckling Behaviour of Skin-Stringer Structures Under Combined Compression and Shear Loading

ASME 2018 International Mechanical Engineering Congress Exposition, Pennsylvania, Amerika Birleşik Devletleri, 9 - 15 Kasım 2018 identifier

Micromechanical Characterization of Nanotube Reinforced Polymers

1st International Conference on Advances in Mechanical and Mechatronics Engineering ICAMMEN 2018, Ankara, Türkiye, 8 - 09 Kasım 2018

A functionally graded multi-phase micromechanical model for carbon nanotube-polymer composites

9th Multiscale Materials Modeling (MMM) Conference, Osaka, Japonya, 28 Ekim - 02 Kasım 2018

Yüksek Hızda Mermi Çarpışma Durumunda Zırh Kombinasyonlarının Sayısal Olarak İncelenmesi

VII. Ulusal Havacılık ve Uzay Konferansı (UHUK), Samsun, Türkiye, 12 - 14 Eylül 2018

Finite element modelling of TBC failure mechanisms by using XFEM

ASME 2018 International Mechanical Engineering Congress and Exposition, IMECE 2018, Pennsylvania, Amerika Birleşik Devletleri, 9 - 15 Kasım 2018, cilt.1 identifier

EXPERIMENTAL STUDY AND FINITE ELEMENT ANALYSIS OF DOVETAIL ATTACHMENTS

ASME International Mechanical Engineering Congress and Exposition, Tama, Japonya, 3 - 09 Kasım 2017 identifier

Laminated Shell Modeling of Sandwich Beams with Ramp Region Under Four Point Bending Loading via Structural Optimization

7th EASN International Conference on Innovation in European Aeronautics Research, Warszawa, Polonya, 26 - 29 Eylül 2017

Development of an Artificial Neural Network Based Analysis Method for Skin-Stringer Structures

7th EASN International Conference on Innovation in European Aeronautics Research, Warszawa, Polonya, 26 - 29 Eylül 2017

Equivalent Model of a Sandwich Beam With Ramp Region Under Four Point Bending via Genetic Algorithm

9th Ankara International Aerospace Conference, Ankara, Türkiye, 20 - 22 Eylül 2017

Molecular Dynamics Simulations of Carbon Nanotube Reinforced Polymer Composites

9th Ankara International Aerospace Conference, Ankara, Türkiye, 20 - 22 Eylül 2017

An Artificial Neural Network Based Analysis Method for Skin- Stringer Structures

9th Ankara International Aerospace Conference, Ankara, Türkiye, 20 - 22 Eylül 2017

Optimization of Compliant Parts of a Trailing Edge Control Surface of a Morphing Wing

9th Ankara International Aerospace Conference, Ankara, Türkiye, 20 - 22 Eylül 2017

Implementation of the Submodelling Technique on the Dovetail Attachments”

9th Ankara International Aerospace Conference, Ankara, Türkiye, 20 - 22 Eylül 2017

Alternative Finite Element Based Modeling Apporaches for Carbon Nanotubes

9th Ankara International Aerospace Conference, Ankara, Türkiye, 20 - 22 Eylül 2017

A Study on Energy Trapping Parameters of a Multistable Elastic Beam

9th Ankara International Aerospace Conference, Ankara, Türkiye, 20 - 22 Eylül 2017

Micromechanically Motivated Modeling of Semicrystalline Polymers

XIV International Conference on Computational Plasticity COMPLAS, Barcelona, İspanya, 5 - 07 Eylül 2017

Damage Progression and Delamination Speeds in CFRP Under Impact Loading

20th International Conference on Composite Struc- tures ICCS 20, Paris, Fransa, 4 - 07 Eylül 2017

Multi-Scale Modelling of Carbon Nanotube Reinforced Polymer Composites

Materials Resistant to Extreme Conditions for Future Energy Systems, Kyyiv, Ukrayna, 12 - 14 Haziran 2017

Numerical Study of High Velocity Impact Response of Veicle Armor Combination Using LS DYNA

11th European LS DYNA Conference, Salzburg, Avusturya, 9 - 11 Mayıs 2017

EXPERIMENTAL AND COMPUTATIONAL STUDY OF DAMAGE PROCESS IN CFRP COMPOSITE BEAMS UNDER LOW VELOCITY IMPACT

17th International Conference on Experimental Mechanics, Rodos, Yunanistan, 3 - 07 Temmuz 2016

A Hybrid Morphing Trailing Edge Designed for Camber Change of the Control Surface

SciTech2016, AIAA Science and Technology Forum 2016, California, Amerika Birleşik Devletleri, 4 - 08 Ocak 2016

Hybrid morphing trailing edge designed for camber change of the control surface

24th AIAA/AHS Adaptive Structures Conference, 2016, California, Amerika Birleşik Devletleri, 4 - 08 Ocak 2016 identifier

DEVELOPMENT OF BOLTED FLANGE DESIGN TOOL BASED ON FINITE ELEMENT ANALYSIS AND ARTIFICIAL NEURAL NETWORK

ASME International Mechanical Engineering Congress and Exposition (IMECE2015), Texas, Amerika Birleşik Devletleri, 13 - 19 Kasım 2015 identifier

Failure Initiation and Progression in 0 90 CFRP Composite Beams Subject to Out of Plane Low velocity Impact

Society of Engineering Science 52nd Annual Technical Meeting, College Park, Amerika Birleşik Devletleri, 26 - 28 Ekim 2015

Büyük Oranda Şekil Değiştirebilen Bir Hibrid Firar Kenarı Kontrol Yüzeyinin Tasarımı ve Analizleri

UHAT2015, III. Ulusal Havacılık Teknolojisi ve Uygulamaları Kongresi, İzmir, Türkiye, 23 - 24 Ekim 2015

Modeling of a Three-Dimensional Spherulite Microstructure in Semicrystalline Polymers

European Conference on Numerical Mathematics and Advanced Applications (ENUMATH), Ankara, Türkiye, 14 - 18 Eylül 2015, cilt.112, ss.567-575 identifier identifier

Finite Element Modeling of Three Dimensional Spherulite Microstructures

European Conference on Numerical Mathematics and Advanced Applications (ENUMATH), Ankara, Türkiye, 14 - 18 Eylül 2015

3D Numerical Simulation of Nonenergetic Reactive Armor

8th Ankara International Aerospace Conference, Ankara, Türkiye, 10 - 12 Eylül 2015

Numerical investigation of impact induced damage progression in composites and correlations with experiments

5th ECCOMAS Thematic Conference on the Mechanical Response of Composites, Bristol, İngiltere, 7 - 09 Eylül 2015

Finite Element Modeling of Textured Surfaces of Ultra High Molecular Weight Tibial Insert

9th European Solid Mechanics Conference ESMC 2015, Madrid, İspanya, 6 - 10 Temmuz 2015

Hibrit Bir Kontrol Yüzeyinin Hesaplamalı Akışkanlar Dinamiği Destekli Yapısal Analizi

UMTS2015, Uluslararası Katılımlı 17. Makina Teorisi Sempozyumu, İzmir, Türkiye, 14 - 17 Haziran 2015

Experimental and Computational Investigation of Out-of-Plane Low Velocity Impact Behavior of CFRP Composite Plates

Annual Conference and Exposition of Society-for-Experimental-Mechanics on Experimental and Applied Mechanics, California, Amerika Birleşik Devletleri, 8 - 11 Haziran 2015, cilt.8, ss.9-16 identifier identifier

A Hybrid Control Surface Capable of Camber and Decamber Morphing

7th Eccomas Thematic Conference on Smart Structures and Materials, Ponte Delgada, Portekiz, 3 - 06 Haziran 2015

A Hybrid Trailing Edge Control Surface Capable of Camber and Decamber Morphing

SMART2015, 7th ECCOMAS Thematic Conference on Smart Structures and Materials, Ponta-Delgada, Portekiz, 3 - 06 Haziran 2015

Bir Hibrit Firar Kenarı Kontrol Yüzeyinin Tasarımı ve Analizi

TMMOB Makina Mühendisleri Odası, VIII. Ulusal Uçak, Havacılık ve Uzay Mühendisliği Kurultayı, Eskişehir, Türkiye, 22 - 23 Mayıs 2015

Design of Experiments Study for Determination for the Study of the Effect of Contact Parameters in Bolted Flange Connections

International Conference on Advances in Mechanical Engineering (ICAME 2015), İstanbul, Türkiye, 13 - 15 Mayıs 2015

Low velocity impact damage on laminated composites simulations and correlations with tests

International Conference on Advances in Composite Materials and Structures, İstanbul, Türkiye, 13 - 15 Nisan 2015

Structural Analysis of an Unconventional Hybrid Control Surface of a Morphing Wing

ICAST2014: 25th International Conference on Adaptive Structures and Technologies, The Hague, Hollanda, 6 - 08 Ekim 2014 identifier

Katmanlı Kompozitlerde Düşük Hızlı Darbe Davranış Analizi

V. Ulusal Havacılık ve Uzay Konferansı (UHUK), Kayseri, Türkiye, 8 - 10 Eylül 2014

Modeling of Spherulite Microstructures in Semicrystalline Polymers

IUTAM Symposium on Innovative Numerical Approaches for Materials and Structures in Multi-Field and Multi-Scale Problems, Siegen, Almanya, 1 - 04 Eylül 2014

Çukur İmla Şişen Zırh Etkileşiminin Sayısal Yöntemlerle İncelenmesi

7. Savunma Teknolojileri Kongresi Kongresi SAVTEK 2014, Ankara, Türkiye, 25 - 27 Haziran 2014

Microstructural Modeling of Semicrystalline Polymers

IUTAM Symposium on Micromechanics of Defects in Solids, Sevilla, İspanya, 9 - 13 Haziran 2014

A Hybrid Trailing Edge Control Surface Concept

DeMEASS-VI, 6th Conference for Design, Modelling and Experiments of Advanced Structures and Systems, The Hague, Hollanda, 25 - 28 Mayıs 2014

Büyük Oranda Şekil Değiştirebilen Kanat Yüzeylerinin Aerodinamik Yükler Altındaki Davranışları

2. Ulusal Havacılık Teknolojisi ve Uygulamaları Kongresi UHAT, İzmir, Türkiye, 29 - 30 Kasım 2013

Büyük Oranda Şekil Değiştirebilen Kanat Yüzeylerinin Aerodinamik Yükler Altında Davranışları

UHAT2013, II. Ulusal Havacılık Teknolojisi ve Uygulamaları Kongresi, İzmir, Türkiye, 29 - 30 Kasım 2013

Büyük Oranda Şekil Değiştirebilen Kontrol Yüzeylerinin Yapısal Özelliklerinin Değerlendirilmesi

UHAT2013, II. Ulusal Havacılık Teknolojisi ve Uygulamaları Kongresi, İzmir, Türkiye, 29 - 30 Kasım 2013

Yarı Kristal Polimer Malzemelerin Çok Ölçekli Modellenmesi

XVIII. Ulusal Mekanik Kongresi, Manisa, Türkiye, 26 - 30 Ağustos 2013

Büyük Oranda Şekil Değiştirebilen Kanat Kontrol Yüzeylerinin Uçuştaki Etkileri

UHAT2012, I. Ulusal Havacılık Teknolojisi ve Uygulamaları Kongresi, İzmir, Türkiye, 20 - 22 Aralık 2012

Modeling of Nanocrystalline Metals based on Competing Grain Boundary and Grain Interior Deformation Mechanisms

ICTAM - 23rd International Congress of Theoretical and Applied Mechanics, Pekin, Çin, 19 Ağustos - 24 Ekim 2012

Multiscale Modeling of Nanocrystalline Metals based on Competing Grain Boundary and Grain Interior Deformation Mechanisms

1st International Workshop on Physics based Modelling of Material Properties and Experimental Observations, Ankara, Türkiye, 22 - 23 Ekim 2012

Constitutive Modeling of Nanocrystalline Metals based on Competing Grain Boundary and Grain Interior Deformation Mechanisms

ECCOMAS - European Congress on Computational Methods in Applied Sciences and Engineering, Viyana, Avusturya, 10 - 14 Eylül 2012

Softening in Nanocrystalline Metals Modeling of Grain Growth Induced Creep and Relaxation

82nd Annual Meeting of Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Graz, Avusturya, 18 - 21 Nisan 2011, cilt.11, ss.377-378

Multiscale Modeling of Nanocrystalline Materials A Variational Approach

82nd Annual Meeting of Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Graz, Avusturya, 18 - 21 Nisan 2011, cilt.11, ss.511-512

A Variational Constitutive Model for Void Growth in Crystals Application to Nanocrystals

IV European Conference on Computational Mechanics (ECCM), Paris, Fransa, 16 - 21 Mayıs 2010

Multiscale Modeling of High Energetic Materials under Impact Loads

10th US National Congress on Computational Mechanics, Columbus, Amerika Birleşik Devletleri, 16 - 19 Temmuz 2009

A Computational Framework of Three Dimensional Configurational Force Driven Brittle Crack Propagation

78th Annual Meeting of Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Zürich, İsviçre, 16 - 20 Temmuz 2007, cilt.7, ss.4030019-4030020

A Robust Adaptive Algorithm for Material Force Driven Brittle Fracture Based on Incremental Energy Minimization

6th European Solid Mechanics Conference, Budapest, Macaristan, 28 Ağustos - 01 Eylül 2006

Robust Algorithm for Brittle Fracture based on Energy Minimization

77th Annual Meeting of Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Berlin, Almanya, 27 - 31 Mart 2006, cilt.6, ss.167-168

On Variational Based Scale Bridging of Inelastic Composites

77th Annual Meeting of Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Berlin, Almanya, 27 - 31 Mart 2006, cilt.6, ss.465-466

Deformation Driven Homogenization of Fracturing Solids

76th Annual Meeting of Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Lüksemburg, 28 Mart - 01 Nisan 2005, cilt.5, ss.333-334

Analysis of Evolving Deformation Microstructures in Instable Inelastic Solids Based on Energy Relaxation Methods

XXI International Congress of Theoretical and Applied Mechanics ICTAM, Varşova, Polonya, 15 - 21 Ağustos 2004

Numerical Computation of Anisotropically Evolving Yield Surfaces Based on Micro to Macro Transitions

75th Annual Meeting of Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Dresden, Almanya, 21 - 26 Mart 2004, cilt.4, ss.219-220

Relaxation Analysis of Material Instabilities in Damage Mechanics Based on Incremental Convexification Techniques

VII International Conference on Computational Plasticity, COMPLAS, Barcelona, İspanya, 7 - 10 Nisan 2003

Application of Relaxation Techniques to Nonconvex Isotropic Damage Model

74th Annual Meeting of Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Abano Terme, İtalya, 24 - 28 Mart 2003, cilt.3, ss.222-223

Kitap & Kitap Bölümleri

Modeling of a Three-Dimensional Spherulite Microstructure in Semicrystalline Polymers

Numerical Mathematics and Advanced Applications, M. Manguoğlu,M. Tezer-Sezgin,S. Göktepe,Ö. Uğur, Editör, Springer, London/Berlin , Berlin, ss.567-574, 2016

Experimental and Computational Investigation of Out-of-Plane Low Velocity Impact Behavior of CFRP Composite Plates

Failure and Damage Evolution Volume 8 Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics, Beese, Allison M., Zehnder, Alan T., Xia, Shuman, Editör, Springer, ss.9-16, 2016

Experimental and Computational Investigation of Out-of-Plane Low Velocity Impact Behavior of CFRP Composite Plates

Fracture Fatigue Failure and Damage Evolution Volume 8, Allison M. Beese, Alan T. Zehnder, Shuman Xia, Editör, Springer, ss.9-16, 2016

Analytical and Numerical Methods for Finite Strain Elastoplasticity

Multifield problems in Fluid and Solid Mechanics, Helmig, R., Mielke, A., Wohlmuth, B., Editör, Springer, ss.491-529, 2006

Ansiklopedide Bölümler