Yayınlar & Eserler

Makaleler 33
Tümü (33)
SCI-E, SSCI, AHCI (33)
SCI-E, SSCI, AHCI, ESCI (33)
Scopus (33)
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 82

1. Dynamic modelling of rotating axially functionally graded pre-twisted blades with chord length variations

27th International Conference on Composite Structures: 27ICCS, Bologna, İtalya, 3 - 06 Eylül 2024, (Özet Bildiri)

2. Frequency Domain Analysis of Aeroelastic Flutter Problem of Planar Structures Using Generalized Differential Quadrature Method

IMAC-XLII Conference and Exposition on Structural Dynamics, Orlando, Florida, Amerika Birleşik Devletleri, 29 Ocak - 01 Şubat 2024, (Tam Metin Bildiri)

3. Nonlinear Vibration Analysis of a Two-Blade System with Shroud-to-Shroud Contact by Using Response-Dependent Nonlinear Normal Modes

42nd IMAC, A Conference and Exposition on Structural Dynamics, IMAC 2024, Florida, Amerika Birleşik Devletleri, 29 Ocak - 01 Şubat 2024, ss.107-113, (Tam Metin Bildiri) identifier

4. Effect of Structural Parameters on the Nonlinear Vibration of L-Shaped Beams

41st IMAC, A Conference and Exposition on Structural Dynamics, 2023, Austin, Amerika Birleşik Devletleri, 13 - 16 Şubat 2023, ss.23-32, (Tam Metin Bildiri) identifier

5. Parameter Optimization and Comparison of Different Small-Scale Elasticity Theories for Carbon Nanotubes

42nd IMAC, A Conference and Exposition on Structural Dynamics, IMAC 2024, Florida, Amerika Birleşik Devletleri, 29 Ocak - 01 Şubat 2024, ss.45-51, (Tam Metin Bildiri) identifier identifier

6. Determination of Flutter Speed of 2D Nonlinear Wing by Using Describing Function Method and State-Space Formulation

40th Conference and Exposition on Structural Dynamics (IMAC), Florida, Amerika Birleşik Devletleri, 7 - 10 Şubat 2022, ss.101-107, (Tam Metin Bildiri) identifier identifier

7. APPLICATION OF MODAL SUPERPOSITION METHOD WITH RESPONSE DEPENDENT NONLINEAR MODES ON THE FORCED RESPONSE ANALYSIS OF BOLTED JOINT CONNECTIONS

ASME International Mechanical Engineering Congress and Exposition (IMECE), Louisiana, Amerika Birleşik Devletleri, 29 Ekim - 02 Kasım 2023, (Tam Metin Bildiri) identifier identifier

8. EFFECT OF WEAR ON THE FORCED RESPONSE OF A SHROUDED BLADE

ASME International Mechanical Engineering Congress and Exposition (IMECE), Louisiana, Amerika Birleşik Devletleri, 29 Ekim - 02 Kasım 2023, (Tam Metin Bildiri) identifier identifier

9. EFFECT OF NONLINEARITIES ON THE VIBRATION REDUCTION PERFORMANCE OF A SYSTEM WITH MULTIPLE NONLINEAR TUNED MASS DAMPERS

ASME International Mechanical Engineering Congress and Exposition (IMECE), Louisiana, Amerika Birleşik Devletleri, 29 Ekim - 02 Kasım 2023, (Tam Metin Bildiri) identifier identifier

10. An Assessment on the Efficiency of Different Reduction Techniques Based on Substructuring for Bladed Disk Systems with Shrouds

40th Conference and Exposition on Structural Dynamics (IMAC), Florida, Amerika Birleşik Devletleri, 7 - 10 Şubat 2022, ss.49-57, (Tam Metin Bildiri) identifier identifier

11. Nonlinear Vibration Analysis of Uniform and Functionally Graded Beams with Spectral Chebyshev Technique and Harmonic Balance Method

40th Conference and Exposition on Structural Dynamics (IMAC), Florida, Amerika Birleşik Devletleri, 7 - 10 Şubat 2022, ss.119-129, (Tam Metin Bildiri) Sürdürülebilir Kalkınma identifier identifier

12. Determination of Nonlinear Joint Forces and Nonlinear Identification of Jointed Connections Using FRFs

40th IMAC, A Conference and Exposition on Structural Dynamics, 2022, Florida, Amerika Birleşik Devletleri, 7 - 10 Şubat 2022, ss.57-61, (Tam Metin Bildiri) identifier

13. EFFECT OF NUMBER OF CONTACT POINTS ON THE FRETTING WEAR ESTIMATION OF A FRICTIONALLY DAMPED BLADE PLATFORM

ASME International Mechanical Engineering Congress and Exposition (IMECE) 2022, Orlando, Florida, Amerika Birleşik Devletleri, 30 Ekim 2022, (Tam Metin Bildiri) identifier

14. DOĞRUSALLAŞTIRILMIŞ EULER DENKLEMLERİYLE 2B KANAT PROFİLLERİ İÇİN ÇIRPINTI HIZININ BELİRLENMESİ

SAVTEK 2022, 10. SAVUNMA TEKNOLOJİLERİ KONGRESİ, Ankara, Türkiye, 13 - 15 Eylül 2022, ss.741-751, (Tam Metin Bildiri)

15. Determination of Nonlinear Joint Forces and Nonlinear Identification of Jointed Connections Using FRFs

IMAC XL, A Conference and Exposition on Structural Dynamics, 2022, Florida, Amerika Birleşik Devletleri, 7 - 10 Şubat 2022, ss.1-5, (Tam Metin Bildiri)

16. Determination of Flutter Speed of 2D Nonlinear Wing by Using Describing Function Method and State-Space Formulation

IMAC XL, A Conference and Exposition on Structural Dynamics, Florida, Amerika Birleşik Devletleri, 7 - 10 Şubat 2022, ss.1-8, (Tam Metin Bildiri)

17. An Assessment on the Efficiency of Different Reduction Techniques Based on Substructuring for Bladed Disk Systems with Shrouds

IMAC XL, A Conference and Exposition on Structural Dynamics, Florida, Amerika Birleşik Devletleri, 7 - 10 Şubat 2022, ss.1-8, (Tam Metin Bildiri)

18. Nonlinear Vibration Analysis of Uniform and Functionally Graded Beams with Spectral Chebyshev Technique and Harmonic Balance Method

IMAC XL, A Conference and Exposition on Structural Dynamics, Florida, Amerika Birleşik Devletleri, 7 - 10 Şubat 2022, ss.1-11, (Tam Metin Bildiri)

19. Nonlinear Vibrations of Rotor-Bearing Systems Supported by Squeeze Film Dampers Due to Unbalance Excitation

American Society of Mechanical Engineers IMECE 2021, Florida, Amerika Birleşik Devletleri, 01 Kasım 2021, (Tam Metin Bildiri) identifier

20. DEVELOPMENT OF LINEARIZED EULER SOLVERS ON FREQUENCY DOMAIN FOR OSCILLATING AIRFOILS

Ankara International Aerospace Conference, Ankara, Türkiye, 08 Eylül 2021, (Tam Metin Bildiri)

21. Nonlinear Free Vibrations of Functionally Graded Microplates Based on the Modified Couple Stress Theory

NODYCON 2021 Second International Nonlinear Dynamics Conference, Roma, İtalya, 16 - 19 Şubat 2021, (Tam Metin Bildiri)

22. Development and Verification of Finite Element Model of a Product-Fixture Assembly used for Shaker Testing

IMAC-XXXIX Conference and Exposition on Structural Dynamics, Amerika Birleşik Devletleri, 8 - 11 Şubat 2021, (Tam Metin Bildiri)

23. Vibration reduction of a structure by using nonlinear tuned vibration absorbers

38th IMAC, A Conference and Exposition on Structural Dynamics, 2020, Texas, Amerika Birleşik Devletleri, 10 - 13 Şubat 2020, ss.231-235, (Tam Metin Bildiri) identifier

24. On the solution of nonlinear algebraic equations following periodic forced response analysis of nonlinear structures using different nonlinear solvers

38th IMAC, A Conference and Exposition on Structural Dynamics, 2020, Texas, Amerika Birleşik Devletleri, 10 - 13 Şubat 2020, ss.121-127, (Tam Metin Bildiri) identifier

25. 3D linear identification of mechanical joint using FRF decoupling and inverse structural modification methods

33rd Conference on Mechanical Vibration and Sound, VIB 2021, Held as Part of the ASME 2021 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC-CIE 2021, Virtual, Online, 17 - 19 Ağustos 2021, cilt.10, (Tam Metin Bildiri) identifier

27. Numerical Computation of Nonlinear Normal Modes (NNMs) by using Response Dependent Nonlinear Mode (RDNM) Concept

International Modal Analysis Conference and Exposition on Structural Dynamics IMAC XXXVIII, Texas, Amerika Birleşik Devletleri, 10 - 13 Şubat 2020, ss.1-4, (Tam Metin Bildiri)

29. Nonlinear 3D Modeling and Vibration Analysis of Horizontal Drum Type Washing Machines

37th IMAC, A Conference and Exposition on Structural Dynamics, 2019, Florida, Amerika Birleşik Devletleri, 28 - 31 Ocak 2019, ss.225-228, (Tam Metin Bildiri) identifier

30. Nonlinear Dynamic Analysis of an Asymmetric Ball Bearing Rotor System

ASME International Mechanical Engineering Congress Exposition IMECE 2019, Salt Lake City, Amerika Birleşik Devletleri, 11 - 14 Kasım 2019, (Tam Metin Bildiri) identifier

31. Nonlinear Forced Response Analysis of Bladed Disks With Wedge Dampers

8th Asian/Australian Rotorcraft Forum, Ankara, Türkiye, 30 Ekim - 02 Kasım 2019, (Tam Metin Bildiri)

33. Design of an Experimental Setup for Periodic Forced Response Analysis of Shrouded Blades with Frictional Contacts

8th Asian/Australian Rotorcraft Forum, Ankara, Türkiye, 31 Ekim - 02 Kasım 2019, (Tam Metin Bildiri)

34. Periodic Vibration Analysis of Nonlinear Structures by Using Response Dependent Nonlinear Modes

TriboMechaDynamics 2019, Houston, Amerika Birleşik Devletleri, 31 Temmuz - 02 Ağustos 2019, (Tam Metin Bildiri)

35. Identifying the joint dynamics of a bolted beam system by using FRF decoupling and the SEMM expansion technique

TriboMechaDynamics 2019, Texas, Amerika Birleşik Devletleri, 31 Temmuz - 02 Ağustos 2019, ss.1-4, (Tam Metin Bildiri)

36. Vibration analysis of washing machines in the drum plane

First International Nonlinear Dynamics Conference NODYCON 2019, ROMA, İtalya, 17 - 20 Şubat 2019, (Tam Metin Bildiri)

37. Vibration reduction by using two tuned mass dampers with dry friction damping

First International Nonlinear Dynamics Conference NODYCON 2019, ROMA, 17 - 20 Şubat 2019, (Tam Metin Bildiri)

38. Frequency domain non-linear modelling and analysis of liquid filled column dampers

First International Nonlinear Dynamics Conference NODYCON 2019, ROMA, İtalya, 17 - 20 Şubat 2019, (Tam Metin Bildiri)

39. Reduced Order Modeling of Bolted Joints in Frequency Domain

IMAC XXXVII: Conference Exposition on Structural Dynamics, Orlando, Amerika Birleşik Devletleri, 28 - 31 Ocak 2019, (Tam Metin Bildiri)

40. Comparison of Linear and Nonlinear Modal Reduction Approaches

IMAC XXXVII: Conference Exposition on Structural Dynamics, Florida, Amerika Birleşik Devletleri, 28 - 31 Ocak 2019, (Tam Metin Bildiri)

41. A Novel Computational Method to Calculate Nonlinear Normal Modes of Complex Structures

IMAC XXXVII: Conference Exposition on Structural Dynamics, Orlando, Amerika Birleşik Devletleri, 28 - 31 Ocak 2019, (Tam Metin Bildiri)

42. Nonlinear 3D Modeling and Vibration Analysis of Horizontal Drum Type Washing Machines

IMAC XXXVII: Conference Exposition on Structural Dynamics, Orlando, Amerika Birleşik Devletleri, 28 - 31 Ocak 2019, (Tam Metin Bildiri)

43. Dynamic characterization of double-relief profile modifications in planetary gear systems

INTERNATIONAL GEAR CONFERENCE 2018, Lyon, Fransa, 27 - 29 Ağustos 2018, ss.1-14, (Tam Metin Bildiri)

44. Approximate analytical solution of nonlinear natural frequencies of a functionally graded material microbeam by using multiple harmonic balance method

47th International Congress and Exposition on Noise Control Engineering: Impact of Noise Control Engineering, INTER-NOISE 2018, Illinois, Amerika Birleşik Devletleri, 26 - 29 Ağustos 2018, (Tam Metin Bildiri) identifier

45. THE EFFECT OF STIFFNESS AND LOADING DEVIATIONS IN A NONLINEAR ISOLATOR HAVING QUASI ZERO STIFFNESS AND GEOMETRICALLY NONLINEAR DAMPING

1st International Symposium on Ethnic Languages and Culture Under - Belt and Road Initiatives, Beijing, Çin, 18 - 21 Temmuz 2016, (Tam Metin Bildiri) identifier identifier

46. The Effect of Stiffness and Loading Deviations in a Nonlinear Isolator Having Quasi Zero Stiffness and Geometrically Nonlinear Damping

Proceedings of the ASME 2017 International Mechanical Engineering Congress and Exposition, 3 - 09 Kasım 2017, (Tam Metin Bildiri) identifier

48. Non-linear Dynamic Analysis for the Lateral Vibration of Beams with Breathing Crack under Harmonic Excitation Using Finite Element Method

ICAF 2017 (35th Conference and 29th Symposium of the International Committee on Aeronautical Fatigue and Structural Integrity), Nagoya, Japonya, 7 - 09 Haziran 2017, (Tam Metin Bildiri) identifier

49. Effect of Dry Friction Damping on the Dynamic Response of Helicopter Tail Shaft

35th IMAC Conference and Exposition on Structural Dynamics, California, Amerika Birleşik Devletleri, 30 Ocak - 02 Şubat 2017, ss.23-30, (Tam Metin Bildiri) identifier identifier

50. Nonlinear Dynamic Analysis of a Spiral Bevel Geared System

35th IMAC Conference and Exposition on Structural Dynamics, California, Amerika Birleşik Devletleri, 30 Ocak - 02 Şubat 2017, ss.31-40, (Tam Metin Bildiri) identifier identifier

51. Nonlinear Transverse Vibrations of a Beam with Multiple Breathing Edge Cracks

35th IMAC Conference and Exposition on Structural Dynamics, California, Amerika Birleşik Devletleri, 30 Ocak - 02 Şubat 2017, ss.259-266, (Tam Metin Bildiri) identifier identifier

52. Nonlinear Vibrations of a Functionally Graded Material Microbeam with Geometric Nonlinearity

35th IMAC Conference and Exposition on Structural Dynamics, California, Amerika Birleşik Devletleri, 30 Ocak - 02 Şubat 2017, ss.167-176, (Tam Metin Bildiri) identifier identifier

53. A Modal Superposition Method for the Analysis of Nonlinear Systems

34th IMAC Conference and Exposition on Structural Dynamics, Florida, Amerika Birleşik Devletleri, 25 - 28 Ocak 2016, ss.269-278, (Tam Metin Bildiri) identifier identifier

54. Nonlinear Time-Varying Dynamic Analysis of a Multi-Mesh Spur Gear Train

34th IMAC Conference and Exposition on Structural Dynamics, Florida, Amerika Birleşik Devletleri, 25 - 28 Ocak 2016, ss.309-321, (Tam Metin Bildiri) identifier

55. A Modified Inverse Eigensensitivity Method for Large Finite Element Models

34th IMAC Conference and Exposition on Structural Dynamics, Florida, Amerika Birleşik Devletleri, 25 - 28 Ocak 2016, ss.293-301, (Tam Metin Bildiri) identifier identifier

56. Functional Series TARMA Models for Non-stationary Tool Vibration Signals Representation and Wear Estimation

34th IMAC Conference and Exposition on Structural Dynamics, Florida, Amerika Birleşik Devletleri, 25 - 28 Ocak 2016, ss.141-151, (Tam Metin Bildiri) identifier identifier

57. Shock Response of an Antenna Structure Considering Geometric Nonlinearity

34th IMAC Conference and Exposition on Structural Dynamics, Florida, Amerika Birleşik Devletleri, 25 - 28 Ocak 2016, ss.47-59, (Tam Metin Bildiri) identifier identifier

58. Nonlinear Vibrations of a Beam with a Breathing Edge Crack Using Multiple Trial Functions

34th IMAC Conference and Exposition on Structural Dynamics, Florida, Amerika Birleşik Devletleri, 25 - 28 Ocak 2016, ss.1-9, (Tam Metin Bildiri) identifier identifier

59. Adaptive Harmonic Balance Methods, A Comparison

34th IMAC Conference and Exposition on Structural Dynamics, Florida, Amerika Birleşik Devletleri, 25 - 28 Ocak 2016, ss.279-289, (Tam Metin Bildiri) identifier identifier

60. Functional Series TARMA Models for Non stationary Tool Vibration Signals Representation and Wear Etimation

IMAC XXXIV: Conference & Exposition on Structural Dynamics, 25 - 28 Ocak 2016, (Tam Metin Bildiri)

61. Optimization of Tooth Bending Fatigue Characteristics of Spur Gear Pairs Using a Gear Dynamics-Based Approach

ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Massachusetts, Amerika Birleşik Devletleri, 2 - 05 Ağustos 2015, (Tam Metin Bildiri) identifier

62. Optimization of Tooth Bending Fatigue Characteristics of Spur Gear Pairs using a Gear Dynamics based Approach

ASME 2015 International Design Engineering Technical Conferences, Boston, Amerika Birleşik Devletleri, 2 - 05 Ağustos 2015, (Tam Metin Bildiri) identifier

63. Dişlilerde Dinamik İletim Hatasını Azaltmaya Yönelik İdeal Profil Değişiklikleri

Uluslararası katılımlı 17. Makina Teorisi Sempozyumu / TrC-IFToMM Symposium on Theory of Machines and Mechanisms, 14 - 17 Haziran 2015, (Tam Metin Bildiri)

64. Output Only Functional Series Time Dependent AutoRegressive Moving Average (FS-TARMA) Modelling of Tool Acceleration Signals for Wear Estimation

33rd IMAC Conference and Exposition on Structural Dynamics, Florida, Amerika Birleşik Devletleri, 2 - 05 Şubat 2015, ss.111-122, (Tam Metin Bildiri) identifier identifier

65. Nonlinear Vibrations of a Beam with a Breathing Edge Crack

33rd IMAC Conference and Exposition on Structural Dynamics, Florida, Amerika Birleşik Devletleri, 2 - 05 Şubat 2015, ss.83-92, (Tam Metin Bildiri) identifier identifier

66. Nonlinear Vibrations of a Flexible L-shaped Beam Using Differential Quadrature Method

33rd IMAC Conference and Exposition on Structural Dynamics, Florida, Amerika Birleşik Devletleri, 2 - 05 Şubat 2015, ss.145-154, (Tam Metin Bildiri) identifier identifier

67. Structural Coupling of Two Nonlinear Structures

XXXII: Conference & Exposition on Structural Dynamics, 2 - 05 Şubat 2015, (Tam Metin Bildiri)

69. Vibration Fatigue Analysis of a Cantilever Beam Using Different Fatigue Theories

IMAC XXXI: Conference & Exposition on Structural Dynamics, 11 - 14 Şubat 2014, (Tam Metin Bildiri)

70. Chatter Reduction in Turning by Using Piezoelectric Shunt Circuit

IMAC XXXI: Conference & Exposition on Structural Dynamics, 11 - 14 Şubat 2014, (Tam Metin Bildiri)

71. Design of a Test Setup for Measuring Dynamic Stiffness of Vibration Isolators

31st International Modal Analysis Conference on Structural Dynamics, IMAC 2013, Garden Grove, CA, Amerika Birleşik Devletleri, 11 - 14 Şubat 2013, cilt.45, ss.235-247, (Tam Metin Bildiri) identifier

72. EFFECTS OF AIRCRAFT AEROELASTIC DEFORMATIONS ON EXTERNAL STORE SEPARATION DYNAMICS

ASME International Mechanical Engineering Congress and Exposition (IMECE2013), California, Amerika Birleşik Devletleri, 15 - 21 Kasım 2013, (Tam Metin Bildiri) identifier identifier

73. A new structural modification method with additional degrees of freedom for dynamic analysis of large systems

IMAC XXXI: Conference Exposition on Structural Dynamics, 11 - 14 Şubat 2013, (Tam Metin Bildiri)

74. Localization and Identification of structural nonlinearities using neural networks

IMAC XXXI: Conference Exposition on Structural Dynamics, 11 - 14 Şubat 2013, (Tam Metin Bildiri)

75. Frequency Domain Optimization of Dry Friction Dampers on Buildings Under Harmonic Excitation

IMAC XXX: Conference & Exposition on Structural Dynamics, 30 Ocak 2012 - 02 Şubat 2017, (Tam Metin Bildiri)

76. Non-linear forced response analysis of mistuned bladed disk assemblies

ASME Turbo Expo 2010: Power for Land, Sea, and Air, GT 2010, Glasgow, İngiltere, 14 - 18 Haziran 2010, cilt.6, ss.757-766, (Tam Metin Bildiri) identifier

77. Mistuning identification of bladed disks utilizing neural networks

ASME Turbo Expo 2010: Power for Land, Sea, and Air, GT 2010, Glasgow, İngiltere, 14 - 18 Haziran 2010, cilt.6, ss.601-610, (Tam Metin Bildiri) identifier

78. Robustness Analysis of Intentional Mistuning Patterns in Randomly Mistuned Bladed Disk Assemblies

International Conference on Noise and Vibration Engineering (ISMA)/Conference of USD, Leuven, Belçika, 20 - 22 Eylül 2010, ss.4865-4874, (Tam Metin Bildiri) identifier

79. SLIDING-MODE CONTROL ALGORITHM DEVELOPMENT FOR ANTI-LOCK BRAKING SYSTEM

10th ASME Biennial Conference on Engineering Systems Design and Analysis, İstanbul, Türkiye, 12 - 24 Temmuz 2010, ss.115-123, (Tam Metin Bildiri) identifier

80. APPLICATION OF TUNED MASS DAMPERS AND LEVER TYPE VIBRATION ISOLATOR TO THE QUARTER-CAR MODEL IN ORDER TO INCREASE RIDE COMFORT

10th ASME Biennial Conference on Engineering Systems Design and Analysis, İstanbul, Türkiye, 12 - 24 Temmuz 2010, ss.67-75, (Tam Metin Bildiri) identifier

81. EFFECT OF INTENTIONAL DRY FRICTION DAMPING ON THE PERFORMANCE OF AN ELASTOMERIC ENGINE MOUNT

10th ASME Biennial Conference on Engineering Systems Design and Analysis, İstanbul, Türkiye, 12 - 24 Temmuz 2010, ss.59-66, (Tam Metin Bildiri) identifier

82. Wedge Damper Modeling and Forced Response Prediction of Frictionally Constrained Blades

Volume 5: Turbo Expo 2007, Montreal, Canada, 14 - 17 Mayıs 2007, (Tam Metin Bildiri)
Metrikler

Yayın

127

Yayın (WoS)

62

Yayın (Scopus)

72

Atıf (WoS)

927

H-İndeks (WoS)

18

Atıf (Scopus)

1176

H-İndeks (Scopus)

19

Atıf (Scholar)

1608

H-İndeks (Scholar)

20

Atıf (Sobiad)

19

H-İndeks (Sobiad)

2

Proje

22

Fikri Mülkiyet

1

Tez Danışmanlığı

60

Açık Erişim

36
BM Sürdürülebilir Kalkınma Amaçları