Yayınlar & Eserler

Yayın Ağı
Makaleler 49
Tümü (49)
SCI-E, SSCI, AHCI (48)
SCI-E, SSCI, AHCI, ESCI (49)
ESCI (1)
Scopus (49)
TRDizin (1)

1. Analytical and computational methods for a laterally graded surface loaded by a bonded piezoelectric thin film

DAĞ S., BALCİ M. N.
Archives of Mechanics , cilt.77, sa.2, ss.91-125, 2025 (SCI-Expanded, Scopus) identifier identifier

2. Effects of translaminar edge crack and fiber angle on fracture toughness and crack propagation behaviors of laminated carbon fiber composites

Asan A. M., Kaman M. O., DAĞ S., Erdem S., Turan K.
International Journal of Materials Research , cilt.115, sa.6, ss.446-462, 2024 (SCI-Expanded, Scopus) identifier identifier

3. Investigation of the translaminar fracture behavior of the fiber-reinforced composites stitched perpendicular to their plane

Asan A. M., Kaman M. O., DAĞ S., Erdem S., Turan K.
Journal of the Brazilian Society of Mechanical Sciences and Engineering , cilt.46, sa.5, 2024 (SCI-Expanded, Scopus) identifier identifier

4. MAGNETOELECTROELASTIC RESPONSE OF FUNCTIONALLY GRADED MULTIFERROIC COATINGS UNDER MOVING HERTZIAN CONTACT

Toktaş S. E., Dağ S.
Journal of Mechanics of Materials and Structures , cilt.19, sa.3, ss.343-371, 2024 (SCI-Expanded, Scopus) identifier identifier

5. Cracking of a functionally graded coating due to sliding contact with heat generation

BALCI M. N., DAĞ S., YILDIRIM B.
Fatigue and Fracture of Engineering Materials and Structures , cilt.46, sa.12, ss.4628-4648, 2023 (SCI-Expanded, Scopus) identifier identifier

6. Mechanics of moving contacts involving functionally graded multiferroics

TOKTAŞ S. E., DAĞ S.
Archives of Mechanics , cilt.75, sa.4, ss.431-468, 2023 (SCI-Expanded, Scopus) identifier identifier

7. Computational elastodynamics of functionally graded thick-walled cylinders and annular coatings subjected to pressure shocks

Abeidi A., DAĞ S.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING , cilt.200, 2022 (SCI-Expanded, Scopus) identifier identifier

8. Multi-layer model for moving contact problems of functionally graded coatings with general variations in physical properties

TOKTAŞ S. E., DAĞ S.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS , cilt.236, sa.10, ss.1967-1980, 2022 (SCI-Expanded, Scopus) identifier identifier

9. Stresses in multi-layer coatings in Hertzian contact with a moving circular punch

TOKTAŞ S. E., DAĞ S.
Tribology International , cilt.171, 2022 (SCI-Expanded, Scopus) identifier identifier

10. Transient dynamic analysis of functionally graded micro-beams considering small-scale effects

Eshraghi I., Dag S.
ARCHIVES OF MECHANICS , cilt.73, sa.4, ss.303-337, 2021 (SCI-Expanded, Scopus) identifier identifier

11. Oblique surface cracking and crack closure in an orthotropic medium under contact loading

TOKTAŞ S. E., DAĞ S.
THEORETICAL AND APPLIED FRACTURE MECHANICS , cilt.109, 2020 (SCI-Expanded, Scopus) identifier identifier

12. Forced vibrations of functionally graded annular and circular plates by domain-boundary element method

Eshraghi I., DAĞ S.
ZAMM-ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK , cilt.100, sa.8, 2020 (SCI-Expanded, Scopus) identifier identifier

13. Moving contact problems involving a rigid punch and a functionally graded coating

Balci M. N., DAĞ S.
APPLIED MATHEMATICAL MODELLING , cilt.81, ss.855-886, 2020 (SCI-Expanded, Scopus) identifier identifier

14. Domain-boundary element method for forced vibrations of fiber-reinforced laminated beams

Ahmed Z., Eshraghi I., DAĞ S.
INTERNATIONAL JOURNAL FOR COMPUTATIONAL METHODS IN ENGINEERING SCIENCE & MECHANICS , cilt.21, sa.3, ss.141-158, 2020 (ESCI, Scopus) identifier identifier

15. Mechanics of dynamic contact of coated substrate and rigid cylindrical ended punch

Balci M. N., DAĞ S.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY , cilt.33, sa.5, ss.2225-2240, 2019 (SCI-Expanded, Scopus) identifier identifier

16. Solution of the dynamic frictional contact problem between a functionally graded coating and a moving cylindrical punch

BALCI M. N., DAĞ S.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES , cilt.161, ss.267-281, 2019 (SCI-Expanded, Scopus) identifier identifier

17. Hyperbolic heat conduction based weight function method for thermal fracture of functionally graded hollow cylinders

Eshraghi I., Soltani N., DAĞ S.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING , cilt.165, ss.249-262, 2018 (SCI-Expanded, Scopus) identifier identifier

18. Thermal effect on bending, buckling and free vibration of functionally graded rectangular micro-plates possessing a variable length scale parameter

Aghazadeh R., Dağ S., Ciğeroğlu E.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS , cilt.24, ss.3549-3572, 2018 (SCI-Expanded, Scopus) identifier identifier

19. Dynamic frictional contact problems involving elastic coatings

BALCI M. N., DAĞ S.
TRIBOLOGY INTERNATIONAL , cilt.124, ss.70-92, 2018 (SCI-Expanded, Scopus) identifier identifier

20. Modelling of graded rectangular micro-plates with variable length scale parameters

Aghazadeh R., Dağ S., Ciğeroğlu E.
STRUCTURAL ENGINEERING AND MECHANICS , cilt.65, ss.573-585, 2018 (SCI-Expanded, Scopus) identifier identifier

21. Domain-boundary element method for elastodynamics of functionally graded Timoshenko beams

Eshraghi I., DAĞ S.
COMPUTERS & STRUCTURES , cilt.195, ss.113-125, 2018 (SCI-Expanded, Scopus) identifier identifier

22. Contact mechanics problem between an orthotropic graded coating and a rigid punch of an arbitrary profile

ARSLAN O., DAĞ S.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES , cilt.135, ss.541-554, 2018 (SCI-Expanded, Scopus) identifier identifier

23. Subsurface stresses in graded coatings subjected to frictional contact with heat generation

BALCI M. N., DAĞ S., YILDIRIM B.
JOURNAL OF THERMAL STRESSES , cilt.40, sa.4, ss.517-534, 2017 (SCI-Expanded, Scopus) identifier identifier

24. Free vibration analysis of functionally graded rectangular nanoplates considering spatial variation of the nonlocal parameter

Ghassabı A. A., Dağ S., Ciğeroğlu E.
ARCHIVES OF MECHANICS , cilt.69, ss.105-130, 2017 (SCI-Expanded, Scopus) identifier identifier

25. Surface cracking in an orthotropic medium subjected to frictional contact

Sarikaya D., DAĞ S.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES , cilt.90, ss.1-11, 2016 (SCI-Expanded, Scopus) identifier identifier

26. Bending and free vibrations of functionally graded annular and circular micro-plates under thermal loading

Eshraghi I., DAĞ S., Soltani N.
COMPOSITE STRUCTURES , cilt.137, ss.196-207, 2016 (SCI-Expanded, Scopus) identifier identifier

27. Consideration of spatial variation of the friction coefficient in contact mechanics analysis of laterally graded materials

DAĞ S.
ZAMM-ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK , cilt.96, sa.1, ss.121-136, 2016 (SCI-Expanded, Scopus) identifier identifier

28. Weight function method for transient thermomechanical fracture analysis of a functionally graded hollow cylinder possessing a circumferential crack

Eshraghi I., Soltani N., DAĞ S.
JOURNAL OF THERMAL STRESSES , cilt.39, sa.10, ss.1182-1199, 2016 (SCI-Expanded, Scopus) identifier identifier

29. Analysis of frictional contacts with heat generation considering temperature dependent properties

BALCI M. N., YILDIRIM B., DAĞ S.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES , cilt.101, ss.59-69, 2015 (SCI-Expanded, Scopus) identifier identifier

30. Consideration of spatial variation of the length scale parameter in static and dynamic analyses of functionally graded annular and circular micro-plates

Eshraghi I., DAĞ S., Soltani N.
COMPOSITES PART B-ENGINEERING , cilt.78, ss.338-348, 2015 (SCI-Expanded, Scopus) identifier identifier

31. Static and free vibration analyses of small-scale functionally graded beams possessing a variable length scale parameter using different beam theories

Aghazadeh R., Ciğeroğlu E., Dağ S.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS , cilt.46, ss.1-11, 2014 (SCI-Expanded, Scopus) identifier identifier

32. Production of graded porous polyamide structures and polyamide-epoxy composites via selective laser sintering

Jande Y. A. C., ERDAL ERDOĞMUŞ M., DAĞ S.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES , cilt.33, sa.11, ss.1017-1036, 2014 (SCI-Expanded, Scopus) identifier identifier

33. Computational Methods for Inclined Cracks in Orthotropic Functionally Graded Materials Under Thermal Stresses

DAĞ S., YILDIRIM B., TOPAL S.
JOURNAL OF THERMAL STRESSES , cilt.36, sa.10, ss.1001-1026, 2013 (SCI-Expanded, Scopus) identifier identifier

34. Frictional Hertzian contact between a laterally graded elastic medium and a rigid circular stamp

DAĞ S., GÜLER M. A., YILDIRIM B., Ozatag A. C.
ACTA MECHANICA , cilt.224, sa.8, ss.1773-1789, 2013 (SCI-Expanded, Scopus) identifier identifier

35. Hygrothermal Fracture Analysis of Orthotropic Functionally Graded Materials Using J(k)-Integral-Based Methods

TOPAL S., DAĞ S.
MATHEMATICAL PROBLEMS IN ENGINEERING , 2013 (SCI-Expanded, Scopus) Creative Commons License identifier identifier

36. Three dimensional computational analysis of fatigue crack propagation in functionally graded materials

Sabuncuoglu B., DAĞ S., YILDIRIM B.
COMPUTATIONAL MATERIALS SCIENCE , cilt.52, sa.1, ss.246-252, 2012 (SCI-Expanded, Scopus) identifier identifier

37. HYGROTHERMAL FRACTURE ANALYSIS OF ORTHOTROPIC MATERIALS USING J(k)-INTEGRAL

DAĞ S., YILDIRIM B., Arslan O., Arman E. E.
JOURNAL OF THERMAL STRESSES , cilt.35, sa.7, ss.596-613, 2012 (SCI-Expanded, Scopus) identifier identifier

38. A surface crack in a graded coating subjected to sliding frictional contact

DAĞ S., APATAY T., GÜLER M. A., Gulgec M.
ENGINEERING FRACTURE MECHANICS , cilt.80, ss.72-91, 2012 (SCI-Expanded, Scopus) identifier identifier

39. Computation of thermal fracture parameters for orthotropic functionally graded materials using J(k)-integral

DAĞ S., Arman E. E., YILDIRIM B.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES , cilt.47, ss.3480-3488, 2010 (SCI-Expanded, Scopus) identifier identifier

40. Subsurface contact stresses in functionally graded coatings loaded by a frictional flat stamp Fonksi•yonel derecelendi•ri•lmi•ş kaplamalarda sürtünmeli• ri•ji•t zimba etki•si•yle oluşan yüzeyalti temas geri•lmeleri•

APATAY T., DAĞ S., Güler M. A., Gülgeç M.
Journal of the Faculty of Engineering and Architecture of Gazi University , cilt.25, sa.3, ss.611-623, 2010 (SCI-Expanded, Scopus, TRDizin) identifier

41. Sliding frictional contact between a rigid punch and a laterally graded elastic medium

DAĞ S., GÜLER M. A., Yidirim B., Ozatag A. C.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES , cilt.46, ss.4038-4053, 2009 (SCI-Expanded, Scopus) identifier identifier

42. Computation of Thermal Fracture Parameters for Inclined Cracks in Functionally Graded Materials Using Jk-Integral

DAĞ S., YILDIRIM B.
JOURNAL OF THERMAL STRESSES , cilt.32, sa.5, ss.530-556, 2009 (SCI-Expanded, Scopus) identifier identifier

43. Mixed-mode fracture analysis of orthotropic functionally graded material coatings using analytical and computational methods

DAĞ S., Ilhan K. A.
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME , cilt.75, sa.5, 2008 (SCI-Expanded, Scopus) identifier identifier

44. Mixed-mode fracture analysis of orthotropic functionally graded materials under mechanical and thermal loads

Dag S., Yildirim B., Sarikaya D.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES , cilt.44, sa.24, ss.7816-7840, 2007 (SCI-Expanded, Scopus) identifier identifier

45. A surface crack in a graded coating bonded to a homogeneous substrate under general loading conditions

El-Borgi S., Abdelmoula R., DAĞ S., Lajnef N.
JOURNAL OF MECHANICS OF MATERIALS AND STRUCTURES , cilt.2, sa.7, ss.1331-1353, 2007 (SCI-Expanded, Scopus) Creative Commons License identifier identifier

46. Mixed-mode fracture analysis of functionally graded materials under thermal stresses: A new approach using J(k)-integral

Dag S.
JOURNAL OF THERMAL STRESSES , cilt.30, sa.3, ss.269-296, 2007 (SCI-Expanded, Scopus) identifier identifier

47. Thermal fracture analysis of orthotropic functionally graded materials using an equivalent domain integral approach

Dag S.
ENGINEERING FRACTURE MECHANICS , cilt.73, sa.18, ss.2802-2828, 2006 (SCI-Expanded, Scopus) identifier identifier

48. Circumferential crack problem for an fgm cylinder under thermal stresses

DAĞ S., Kadioğlu S., Yahşi O. S.
Journal of Thermal Stresses , cilt.22, sa.7, ss.659-687, 1999 (SCI-Expanded, Scopus) identifier identifier

49. Crack problem for a functionally graded layer on an elastic foundation

Kadioǧlu S., DAĞ S., Yahşi S.
International Journal of Fracture , cilt.94, sa.1, ss.63-77, 1998 (SCI-Expanded, Scopus) identifier identifier
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 14

1. Fonksiyonel Derecelendirilmiş Multiferroik Kaplama ile Yarı-Dairesel Zımba Arasında Hareketli Temas Problemi

Toktaş S. E., Dağ S.
23. Ulusal Mekanik Kongresi, Konya, Türkiye, 4 - 07 Eylül 2023, ss.8-22, (Tam Metin Bildiri) Creative Commons License

2. Rastgele Derecelendirilmiş Kaplama ile Yarı-Dairesel Zımba Arasındaki Hareketli Temas Problemi Üzerine

Toktaş S. E., Dağ S.
Contact Mechanics International Symposium, Lausanne, İsviçre, 23 - 25 Mayıs 2022, ss.19, (Özet Bildiri) Creative Commons License

3. MIXED-MODE HYGROTHERMAL FRACTURE ANALYSIS OF ORTHOTROPIC FUNCTIONALLY GRADED MATERIALS USING J-INTEGRAL

TOPAL S., DAĞ S.
12th ASME Biennial Conference on Engineering Systems Design and Analysis (ESDA2014), Copenhagen, Danimarka, 25 - 27 Haziran 2014, (Tam Metin Bildiri) identifier

4. On the generation of a loading history with zero mean for structures subjected to multiaxial variable stresses

Kocer B., Yazıcıoğlu Y., Dağ S.
The Ninth International Conference on Multiaxial Fatigue & Fracture ICMFF 2010, Parma, İtalya, 7 - 09 Haziran 2010, ss.211-218, (Tam Metin Bildiri)

5. Manufacturing of Functionally Graded Porous Products by Selective Laser Sintering

ERDAL ERDOĞMUŞ M., DAĞ S., Jande Y., Tekin C. M.
10th International Symposium on Multiscale, Multifunctional and Functionally Graded Materials, Sendai, Japonya, 22 - 25 Eylül 2008, ss.253-258, (Tam Metin Bildiri) identifier identifier

6. Three Dimensional Modeling of Inclined Surface Cracks in FGM Coatings

Kosker S., DAĞ S., YILDIRIM B.
10th International Symposium on Multiscale, Multifunctional and Functionally Graded Materials, Sendai, Japonya, 22 - 25 Eylül 2008, ss.109-110, (Tam Metin Bildiri) identifier identifier

7. Mechanical modeling of Thin Films Bonded to Functionally Graded Materials

GÜLER M. A., Gulver Y. F., DAĞ S.
10th International Symposium on Multiscale, Multifunctional and Functionally Graded Materials, Sendai, Japonya, 22 - 25 Eylül 2008, ss.333-334, (Tam Metin Bildiri) identifier identifier

8. Structural finite element analysis of stiffened and honeycomb panels of the RASAT satellite

Ontac S., DAĞ S., Goekler M. I.
3rd International Conference on Recent Advances in Space Technologies, İstanbul, Türkiye, 14 - 16 Haziran 2007, ss.171-172, (Tam Metin Bildiri) identifier identifier

9. Mixed-mode stress intensity factors for an embedded crack in an orthotropic FGM coating

DAĞ S., Ilhan K. A., Erdogan F.
9th International Conference on Multiscale and Functionally Graded Materials, Hawaii, Amerika Birleşik Devletleri, 15 - 18 Ekim 2006, cilt.973, ss.16-17, (Tam Metin Bildiri) identifier

10. The frictional contact problem of sliding rigid parabolic stamps on graded materials

GÜLER M. A., Erdogan F., DAĞ S.
9th International Conference on Multiscale and Functionally Graded Materials, Hawaii, Amerika Birleşik Devletleri, 15 - 18 Ekim 2006, cilt.973, ss.784-785, (Tam Metin Bildiri) identifier

11. Fatigue crack growth analysis models for functionally graded materials

DAĞ S., Sabuncuoglu B., YILDIRIM B.
9th International Conference on Multiscale and Functionally Graded Materials, Hawaii, Amerika Birleşik Devletleri, 15 - 18 Ekim 2006, cilt.973, ss.423-424, (Tam Metin Bildiri) identifier

12. Three dimensional analysis of periodic cracking in FGM coatings under thermal stresses

DAĞ S., Yildirin B., Erdogan F.
9th International Conference on Multiscale and Functionally Graded Materials, Hawaii, Amerika Birleşik Devletleri, 15 - 18 Ekim 2006, cilt.973, ss.676-677, (Tam Metin Bildiri) identifier

13. Modeling of thin films and cover plates bonded to graded substrates

GÜLER M. A., Erdogan F., DAĞ S.
9th International Conference on Multiscale and Functionally Graded Materials, Hawaii, Amerika Birleşik Devletleri, 15 - 18 Ekim 2006, cilt.973, ss.790-791, (Tam Metin Bildiri) identifier

14. Contact mechanics of graded materials: Analyses using singular integral equations

Dag S.
9th International Conference on Multiscale and Functionally Graded Materials, Hawaii, Amerika Birleşik Devletleri, 15 - 18 Ekim 2006, cilt.973, ss.820-825, (Tam Metin Bildiri) identifier
Metrikler

Yayın

63

Yayın (WoS)

60

Yayın (Scopus)

53

Atıf (WoS)

1163

H-İndeks (WoS)

20

Atıf (Scopus)

1228

H-İndeks (Scopus)

20

Atıf (Scholar)

2000

H-İndeks (Scholar)

25

Proje

5

Tez Danışmanlığı

46

Açık Erişim

38