Prof. SERKAN DAĞ

Publication Network

Published journal articles indexed by SCI, SSCI, and AHCI

Effects of translaminar edge crack and fiber angle on fracture toughness and crack propagation behaviors of laminated carbon fiber composites

Asan A. M., Kaman M. O., DAĞ S., Erdem S., Turan K.

International Journal of Materials Research , vol.115, no.6, pp.446-462, 2024 (SCI-Expanded)

Investigation of the translaminar fracture behavior of the fiber-reinforced composites stitched perpendicular to their plane

Asan A. M., Kaman M. O., DAĞ S., Erdem S., Turan K.

Journal of the Brazilian Society of Mechanical Sciences and Engineering , vol.46, no.5, 2024 (SCI-Expanded)

MAGNETOELECTROELASTIC RESPONSE OF FUNCTIONALLY GRADED MULTIFERROIC COATINGS UNDER MOVING HERTZIAN CONTACT

TOKTAŞ S. E., DAĞ S.

Journal of Mechanics of Materials and Structures , vol.19, no.3, pp.343-371, 2024 (SCI-Expanded)

Cracking of a functionally graded coating due to sliding contact with heat generation

BALCI M. N., DAĞ S., YILDIRIM B.

Fatigue and Fracture of Engineering Materials and Structures , vol.46, no.12, pp.4628-4648, 2023 (SCI-Expanded)

Mechanics of moving contacts involving functionally graded multiferroics

TOKTAŞ S. E., DAĞ S.

Archives of Mechanics , vol.75, no.4, pp.431-468, 2023 (SCI-Expanded)

Computational elastodynamics of functionally graded thick-walled cylinders and annular coatings subjected to pressure shocks

Abeidi A., DAĞ S.

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING , vol.200, 2022 (SCI-Expanded)

Multi-layer model for moving contact problems of functionally graded coatings with general variations in physical properties

TOKTAŞ S. E., DAĞ S.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS , vol.236, no.10, pp.1967-1980, 2022 (SCI-Expanded)

Stresses in multi-layer coatings in Hertzian contact with a moving circular punch

TOKTAŞ S. E., DAĞ S.

Tribology International , vol.171, 2022 (SCI-Expanded)

Transient dynamic analysis of functionally graded micro-beams considering small-scale effects

Eshraghi I., Dag S.

ARCHIVES OF MECHANICS , vol.73, no.4, pp.303-337, 2021 (SCI-Expanded)

Oblique surface cracking and crack closure in an orthotropic medium under contact loading

TOKTAŞ S. E., DAĞ S.

THEORETICAL AND APPLIED FRACTURE MECHANICS , vol.109, 2020 (SCI-Expanded)

Forced vibrations of functionally graded annular and circular plates by domain-boundary element method

Eshraghi I., DAĞ S.

ZAMM-ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK , vol.100, no.8, 2020 (SCI-Expanded)

Moving contact problems involving a rigid punch and a functionally graded coating

Balci M. N., DAĞ S.

APPLIED MATHEMATICAL MODELLING , vol.81, pp.855-886, 2020 (SCI-Expanded)

Mechanics of dynamic contact of coated substrate and rigid cylindrical ended punch

Balci M. N., DAĞ S.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY , vol.33, no.5, pp.2225-2240, 2019 (SCI-Expanded)

Solution of the dynamic frictional contact problem between a functionally graded coating and a moving cylindrical punch

BALCI M. N., DAĞ S.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES , vol.161, pp.267-281, 2019 (SCI-Expanded)

Thermal effect on bending, buckling and free vibration of functionally graded rectangular micro-plates possessing a variable length scale parameter

Aghazadeh R., Dağ S., Ciğeroğlu E.

MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS , vol.24, pp.3549-3572, 2018 (SCI-Expanded)

Dynamic frictional contact problems involving elastic coatings

BALCI M. N., DAĞ S.

TRIBOLOGY INTERNATIONAL , vol.124, pp.70-92, 2018 (SCI-Expanded)

Hyperbolic heat conduction based weight function method for thermal fracture of functionally graded hollow cylinders

Eshraghi I., Soltani N., DAĞ S.

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING , vol.165, pp.249-262, 2018 (SCI-Expanded)

Modelling of graded rectangular micro-plates with variable length scale parameters

Aghazadeh R., Dağ S., Ciğeroğlu E.

STRUCTURAL ENGINEERING AND MECHANICS , vol.65, pp.573-585, 2018 (SCI-Expanded)

Domain-boundary element method for elastodynamics of functionally graded Timoshenko beams

Eshraghi I., DAĞ S.

COMPUTERS & STRUCTURES , vol.195, pp.113-125, 2018 (SCI-Expanded)

Contact mechanics problem between an orthotropic graded coating and a rigid punch of an arbitrary profile

ARSLAN O., DAĞ S.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES , vol.135, pp.541-554, 2018 (SCI-Expanded)

Subsurface stresses in graded coatings subjected to frictional contact with heat generation

BALCI M. N., DAĞ S., YILDIRIM B.

JOURNAL OF THERMAL STRESSES , vol.40, no.4, pp.517-534, 2017 (SCI-Expanded)

Free vibration analysis of functionally graded rectangular nanoplates considering spatial variation of the nonlocal parameter

Ghassabı A. A., Dağ S., Ciğeroğlu E.

ARCHIVES OF MECHANICS , vol.69, pp.105-130, 2017 (SCI-Expanded)

Surface cracking in an orthotropic medium subjected to frictional contact

Sarikaya D., DAĞ S.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES , vol.90, pp.1-11, 2016 (SCI-Expanded)

Bending and free vibrations of functionally graded annular and circular micro-plates under thermal loading

Eshraghi I., DAĞ S., Soltani N.

COMPOSITE STRUCTURES , vol.137, pp.196-207, 2016 (SCI-Expanded)

Consideration of spatial variation of the friction coefficient in contact mechanics analysis of laterally graded materials

DAĞ S.

ZAMM-ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK , vol.96, no.1, pp.121-136, 2016 (SCI-Expanded)

Weight function method for transient thermomechanical fracture analysis of a functionally graded hollow cylinder possessing a circumferential crack

Eshraghi I., Soltani N., DAĞ S.

JOURNAL OF THERMAL STRESSES , vol.39, no.10, pp.1182-1199, 2016 (SCI-Expanded)

Analysis of frictional contacts with heat generation considering temperature dependent properties

BALCI M. N., YILDIRIM B., DAĞ S.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES , vol.101, pp.59-69, 2015 (SCI-Expanded)

Consideration of spatial variation of the length scale parameter in static and dynamic analyses of functionally graded annular and circular micro-plates

Eshraghi I., DAĞ S., Soltani N.

COMPOSITES PART B-ENGINEERING , vol.78, pp.338-348, 2015 (SCI-Expanded)

Static and free vibration analyses of small-scale functionally graded beams possessing a variable length scale parameter using different beam theories

Aghazadeh R., Ciğeroğlu E., Dağ S.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS , vol.46, pp.1-11, 2014 (SCI-Expanded)

Production of graded porous polyamide structures and polyamide-epoxy composites via selective laser sintering

Jande Y. A. C., ERDAL ERDOĞMUŞ M., DAĞ S.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES , vol.33, no.11, pp.1017-1036, 2014 (SCI-Expanded)

Computational Methods for Inclined Cracks in Orthotropic Functionally Graded Materials Under Thermal Stresses

DAĞ S., YILDIRIM B., TOPAL S.

JOURNAL OF THERMAL STRESSES , vol.36, no.10, pp.1001-1026, 2013 (SCI-Expanded)

Frictional Hertzian contact between a laterally graded elastic medium and a rigid circular stamp

DAĞ S., GÜLER M. A., YILDIRIM B., Ozatag A. C.

ACTA MECHANICA , vol.224, no.8, pp.1773-1789, 2013 (SCI-Expanded)

Hygrothermal Fracture Analysis of Orthotropic Functionally Graded Materials Using J(k)-Integral-Based Methods

TOPAL S., DAĞ S.

MATHEMATICAL PROBLEMS IN ENGINEERING , 2013 (SCI-Expanded)

Three dimensional computational analysis of fatigue crack propagation in functionally graded materials

Sabuncuoglu B., DAĞ S., YILDIRIM B.

COMPUTATIONAL MATERIALS SCIENCE , vol.52, no.1, pp.246-252, 2012 (SCI-Expanded)

A surface crack in a graded coating subjected to sliding frictional contact

DAĞ S., APATAY T., GÜLER M. A., Gulgec M.

ENGINEERING FRACTURE MECHANICS , vol.80, pp.72-91, 2012 (SCI-Expanded)

HYGROTHERMAL FRACTURE ANALYSIS OF ORTHOTROPIC MATERIALS USING J(k)-INTEGRAL

DAĞ S., YILDIRIM B., Arslan O., Arman E. E.

JOURNAL OF THERMAL STRESSES , vol.35, no.7, pp.596-613, 2012 (SCI-Expanded)

Computation of thermal fracture parameters for orthotropic functionally graded materials using J(k)-integral

DAĞ S., Arman E. E., YILDIRIM B.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES , vol.47, pp.3480-3488, 2010 (SCI-Expanded)

Subsurface contact stresses in functionally graded coatings loaded by a frictional flat stamp Fonksi•yonel derecelendi•ri•lmi•ş kaplamalarda sürtünmeli• ri•ji•t zimba etki•si•yle oluşan yüzeyalti temas geri•lmeleri•

APATAY T., DAĞ S., Güler M. A., Gülgeç M.

Journal of the Faculty of Engineering and Architecture of Gazi University , vol.25, no.3, pp.611-623, 2010 (SCI-Expanded)

Sliding frictional contact between a rigid punch and a laterally graded elastic medium

DAĞ S., GÜLER M. A., Yidirim B., Ozatag A. C.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES , vol.46, pp.4038-4053, 2009 (SCI-Expanded)

Computation of Thermal Fracture Parameters for Inclined Cracks in Functionally Graded Materials Using Jk-Integral

DAĞ S., YILDIRIM B.

JOURNAL OF THERMAL STRESSES , vol.32, no.5, pp.530-556, 2009 (SCI-Expanded)

Mixed-mode fracture analysis of orthotropic functionally graded material coatings using analytical and computational methods

DAĞ S., Ilhan K. A.

JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME , vol.75, no.5, 2008 (SCI-Expanded)

Mixed-mode fracture analysis of orthotropic functionally graded materials under mechanical and thermal loads

Dag S., Yildirim B., Sarikaya D.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES , vol.44, no.24, pp.7816-7840, 2007 (SCI-Expanded)

A surface crack in a graded coating bonded to a homogeneous substrate under general loading conditions

El-Borgi S., Abdelmoula R., DAĞ S., Lajnef N.

JOURNAL OF MECHANICS OF MATERIALS AND STRUCTURES , vol.2, no.7, pp.1331-1353, 2007 (SCI-Expanded)

Mixed-mode fracture analysis of functionally graded materials under thermal stresses: A new approach using J(k)-integral

Dag S.

JOURNAL OF THERMAL STRESSES , vol.30, no.3, pp.269-296, 2007 (SCI-Expanded)

Thermal fracture analysis of orthotropic functionally graded materials using an equivalent domain integral approach

Dag S.

ENGINEERING FRACTURE MECHANICS , vol.73, no.18, pp.2802-2828, 2006 (SCI-Expanded)

Circumferential crack problem for an fgm cylinder under thermal stresses

DAĞ S., Kadioğlu S., Yahşi O. S.

Journal of Thermal Stresses , vol.22, no.7, pp.659-687, 1999 (SCI-Expanded)

Crack problem for a functionally graded layer on an elastic foundation

Kadioǧlu S., DAĞ S., Yahşi S.

International Journal of Fracture , vol.94, no.1, pp.63-77, 1998 (SCI-Expanded)

Articles Published in Other Journals

Domain-boundary element method for forced vibrations of fiber-reinforced laminated beams

Ahmed Z., Eshraghi I., DAĞ S.

INTERNATIONAL JOURNAL FOR COMPUTATIONAL METHODS IN ENGINEERING SCIENCE & MECHANICS , vol.21, no.3, pp.141-158, 2020 (ESCI)

Refereed Congress / Symposium Publications in Proceedings

Fonksiyonel Derecelendirilmiş Multiferroik Kaplama ile Yarı-Dairesel Zımba Arasında Hareketli Temas Problemi

Toktaş S. E., Dağ S.

23. Ulusal Mekanik Kongresi, Konya, Turkey, 4 - 07 September 2023, pp.8-22

On the moving contact problem between an arbitrarily graded coating and a semi-circular punch

Toktaş S. E., Dağ S.

Contact Mechanics International Symposium, Lausanne, Switzerland, 23 - 25 May 2022, pp.19

MIXED-MODE HYGROTHERMAL FRACTURE ANALYSIS OF ORTHOTROPIC FUNCTIONALLY GRADED MATERIALS USING J-INTEGRAL

TOPAL S., DAĞ S.

12th ASME Biennial Conference on Engineering Systems Design and Analysis (ESDA2014), Copenhagen, Denmark, 25 - 27 June 2014

On the generation of a loading history with zero mean for structures subjected to multiaxial variable stresses

Kocer B., Yazıcıoğlu Y., Dağ S.

The Ninth International Conference on Multiaxial Fatigue & Fracture ICMFF 2010, Parma, Italy, 7 - 09 June 2010, pp.211-218

Manufacturing of Functionally Graded Porous Products by Selective Laser Sintering

ERDAL ERDOĞMUŞ M., DAĞ S., Jande Y., Tekin C. M.

10th International Symposium on Multiscale, Multifunctional and Functionally Graded Materials, Sendai, Japan, 22 - 25 September 2008, pp.253-258

Three Dimensional Modeling of Inclined Surface Cracks in FGM Coatings

Kosker S., DAĞ S., YILDIRIM B.

10th International Symposium on Multiscale, Multifunctional and Functionally Graded Materials, Sendai, Japan, 22 - 25 September 2008, pp.109-110

Mechanical modeling of Thin Films Bonded to Functionally Graded Materials

GÜLER M. A., Gulver Y. F., DAĞ S.

10th International Symposium on Multiscale, Multifunctional and Functionally Graded Materials, Sendai, Japan, 22 - 25 September 2008, pp.333-334

Structural finite element analysis of stiffened and honeycomb panels of the RASAT satellite

Ontac S., DAĞ S., Goekler M. I.

3rd International Conference on Recent Advances in Space Technologies, İstanbul, Turkey, 14 - 16 June 2007, pp.171-172

Mixed-mode stress intensity factors for an embedded crack in an orthotropic FGM coating

DAĞ S., Ilhan K. A., Erdogan F.

9th International Conference on Multiscale and Functionally Graded Materials, Hawaii, United States Of America, 15 - 18 October 2006, vol.973, pp.16-17

The frictional contact problem of sliding rigid parabolic stamps on graded materials

GÜLER M. A., Erdogan F., DAĞ S.

9th International Conference on Multiscale and Functionally Graded Materials, Hawaii, United States Of America, 15 - 18 October 2006, vol.973, pp.784-785

Fatigue crack growth analysis models for functionally graded materials

DAĞ S., Sabuncuoglu B., YILDIRIM B.

9th International Conference on Multiscale and Functionally Graded Materials, Hawaii, United States Of America, 15 - 18 October 2006, vol.973, pp.423-424

Three dimensional analysis of periodic cracking in FGM coatings under thermal stresses

DAĞ S., Yildirin B., Erdogan F.

9th International Conference on Multiscale and Functionally Graded Materials, Hawaii, United States Of America, 15 - 18 October 2006, vol.973, pp.676-677

Modeling of thin films and cover plates bonded to graded substrates

GÜLER M. A., Erdogan F., DAĞ S.

9th International Conference on Multiscale and Functionally Graded Materials, Hawaii, United States Of America, 15 - 18 October 2006, vol.973, pp.790-791

Contact mechanics of graded materials: Analyses using singular integral equations

Dag S.

9th International Conference on Multiscale and Functionally Graded Materials, Hawaii, United States Of America, 15 - 18 October 2006, vol.973, pp.820-825

Metrics

Publication

Citation (WoS)

1070

H-Index (WoS)

Citation (Scopus)

1143

H-Index (Scopus)

Citation (Scholar)

146

Publications & Works

Publication

Citation (WoS)

H-Index (WoS)

Citation (Scopus)

H-Index (Scopus)

Citation (Scholar)

H-Index (Scholar)

Project

Thesis Advisory

Open Access