Doç. Dr. CANER ŞİMŞİR

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

A comprehensive study of the effect of scanning strategy on IN939 fabricated by powder bed fusion-laser beam

Doğu M. N., Ozer S., Yalçın M. A., Davut K., Obeidi M. A., Simsir C., et al.

Journal of Materials Research and Technology , cilt.33, ss.5457-5481, 2024 (SCI-Expanded)

Excessive damage increase in dual phase steels under high strain rates and temperatures

Cobanoglu M., Ertan R. K., ŞİMŞİR C., EFE M.

INTERNATIONAL JOURNAL OF DAMAGE MECHANICS , cilt.30, sa.2, ss.283-296, 2021 (SCI-Expanded)

A flow stress model for steel in cold forging process range and the associated method for parameter identification

Simsir C., Duran D.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.94, ss.3795-3808, 2018 (SCI-Expanded)

Dynamic strain aging in DP steels at forming relevant strain rates and temperatures

BAYRAMIN B., Simsir C., EFE M.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.704, ss.164-172, 2017 (SCI-Expanded)

Simulation of through-hardening of SAE 52100 steel bearings - Part II: Validation at industrial scale

Evcil G. E., Mustak O., Simsir C.

MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK , cilt.47, sa.8, ss.746-754, 2016 (SCI-Expanded)

Simulation of through-hardening of SAE 52100 steel bearings - Part I: Determination of material properties

Mustak O., Evcil G. E., Simsir C.

MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK , cilt.47, sa.8, ss.735-745, 2016 (SCI-Expanded)

Multiscale modeling of tempering of AISI H13 hot-work tool steel - Part 1: Prediction of microstructure evolution and coupling with mechanical properties

Eser A., Broeckmann C., Simsir C.

COMPUTATIONAL MATERIALS SCIENCE , cilt.113, ss.280-291, 2016 (SCI-Expanded)

Multiscale modeling of tempering of AISI H13 hot-work tool steel - Part 2: Coupling predicted mechanical properties with FEM simulations

Eser A., Broeckmann C., Simsir C.

COMPUTATIONAL MATERIALS SCIENCE , cilt.113, ss.292-300, 2016 (SCI-Expanded)

Simulation and Optimization in Materials Technology

Guerrero M., Simsir C., Deus A., Sarler B.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING , cilt.2014, 2014 (SCI-Expanded)

Process-chain simulation for prediction of the distortion of case-hardened gear blanks

Simsir C., Hunkel M., Luetjens J., Rentsch R.

MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK , cilt.43, ss.163-170, 2012 (SCI-Expanded)

Parameter identification for an Armstrong-Frederick hardening law for supercooled austenite of SAE 52100 steel

Wolff M., Suhr B., Simsir C.

COMPUTATIONAL MATERIALS SCIENCE , cilt.50, sa.2, ss.487-495, 2010 (SCI-Expanded)

Dimensional analysis of the thermomechanical problem arising during through-hardening of cylindrical steel components

Simsir C., Luebben T., Hoffmann F., Zoch H.

COMPUTATIONAL MATERIALS SCIENCE , cilt.49, sa.3, ss.462-472, 2010 (SCI-Expanded)

The Bauschinger effect in the supercooled austenite of SAE 52100 steel

Simsir C., Dalgic M., Luebben T., Irretier A., Wolff M., Zoch H. W.

ACTA MATERIALIA , cilt.58, sa.13, ss.4478-4491, 2010 (SCI-Expanded)

Quantitative analysis of the influence of strain hardening on equal channel angular pressing process

ŞİMŞİR C., Karpuz P., GÜR C. H.

COMPUTATIONAL MATERIALS SCIENCE , cilt.48, sa.3, ss.633-639, 2010 (SCI-Expanded)

A Simulation of the Quenching Process for Predicting Temperature, Microstructure and Residual Stresses

Simsir C., GÜR C. H.

STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING , cilt.56, sa.2, ss.93-103, 2010 (SCI-Expanded)

Investigating the effects of hardening of aluminium alloys on equal-channel angular pressing-A finite-element study

Karpuz P., Simsir C., GÜR C. H.

Materials Science and Engineering A , cilt.503, ss.148-151, 2009 (SCI-Expanded)

A review on modeling and simulation of quenching

Şimşir C., Hakan Gür C. H.

Journal of ASTM International , cilt.6, sa.2, 2009 (SCI-Expanded)

A FEM based framework for simulation of thermal treatments: Application to steel quenching

Şimşir C., GÜR C. H.

COMPUTATIONAL MATERIALS SCIENCE , cilt.44, sa.2, ss.588-600, 2008 (SCI-Expanded)

3D FEM simulation of steel quenching and investigation of the effect of asymmetric geometry on residual stress distribution

Simsir C., GÜR C. H.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , cilt.207, ss.211-221, 2008 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Application of the Contour Method to Determine Axial Residual Stresses in Cold Extruded Steel Rods

Aydin O., ŞİMŞİR C.

FME Transactions , cilt.49, sa.4, ss.941-949, 2021 (ESCI)

Transformation Induced Plasticity (TRIP) of SAE 52100 Steel during Martensitic and Bainitic Transformations

Şimşir C.

Hittite Journal of Science Engineering , cilt.4, sa.2, ss.125-130, 2017 (Hakemli Dergi)

Simulation trends in quenching technology for automotive components

Felde I., Şimşir C.

International Heat Treatment and Surface Engineering , cilt.8, sa.1, ss.42-48, 2014 (Scopus)

Anisotropic Transformation Strain and Its Consequences on Distortion during Austenitization

Simsir C., Lubben T., Hunkel M., Hoffmann F., Zoch H.

MATERIALS PERFORMANCE AND CHARACTERIZATION , cilt.1, sa.1, 2012 (ESCI)

Simulation of Quenching: A Review

GÜR C. H., Şimşir C.

MATERIALS PERFORMANCE AND CHARACTERIZATION , cilt.1, sa.1, 2012 (ESCI)

Metallurgical influence on quench distortion of SAE 52100 long cylinders

Maradit B., Şimşir C., Lübben T., GÜR C. H.

International Heat Treatment and Surface Engineering , cilt.5, sa.2, ss.57-60, 2011 (Scopus)

A new framework for simulation of heat treatments

Şimşir C., GÜR C. H.

International Journal of Microstructure and Materials Properties , cilt.5, ss.399-411, 2010 (Scopus)

A review on modeling and simulation of quenching

Şimşir C., Hakan Gür C. H.

ASTM Special Technical Publication , ss.117-156, 2010 (Scopus)

Simulation of equal channel angular pressing applied to produce structures with ultrafine-sized grains

Karpuz P., ŞİMŞİR C., Hakan Gür C. H.

International Journal of Microstructure and Materials Properties , cilt.4, sa.3, ss.356-367, 2009 (Scopus)

A mathematical framework for simulation of thermal processing of materials: Application to steel quenching

Şimşir C., GÜR C. H.

Turkish Journal of Engineering and Environmental Sciences , cilt.32, sa.2, ss.85-100, 2008 (Scopus)

A Mathematical Framework for Simulation of Thermal Processing of Materials

ŞİMŞİR C., GÜR C. H.

Turkish Journal of Engineering and Environmental Sciences , cilt.32, ss.85-100, 2008 (Scopus)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Evolution of microstructure during hot incremental disk rolling of a nickel-based super-alloy

Dinçer M. Ş., Ozcatalbas M., Acar S. S., Music Ö., ŞİMŞİR C.

26th International ESAFORM Conference on Material Forming, ESAFORM 2023, Krakow, Polonya, 19 - 21 Nisan 2023, cilt.28, ss.667-674

A Material Perspective on Consequences of Deformation Heating During Stamping of DP Steels

Şimşir C., Davut K., Efe M., Çetin B.

International Deep Drawing Research Group (IDDRG), Munich, Almanya, 2 - 06 Temmuz 2017, cilt.896

A Potential Solution to Mystical Materials in Indentation Test

Billur E., Cetin B., Music O., Simsir C., Davut K.

International Conference on the Technology of Plasticity (ICTP), Cambridge, Kanada, 17 - 22 Eylül 2017, cilt.207, ss.962-967

Determination of Factors Influencing Distortion of Carburized Quenching of Steel Shafts Using DoE with Computer Simulations

Yılmaz H., Yazır B., Yıldız S., DAVUT K., ŞİMŞİR C.

18th International Metallurgy and Materials Conference (IMMC2016), İstanbul, Türkiye, 29 Eylül - 01 Ekim 2016, ss.932-936

Determination of Isothermal Austenite Grain Growth Model Parameters for SAE 8620H Carburizing Steel

Yıldız S., Yılmaz H., Yazır B., Evcil E., ŞİMŞİR C., DAVUT K.

18th International Metallurgy and Materials Conference (IMMC2016), İstanbul, Türkiye, 29 Eylül - 01 Ekim 2016, ss.485-489

Sensitivity Analysis of Distortion of Carburized Steel Shafts Using Computer Simulations

Yazır B., Evcil E., Yıldız S., DAVUT K., ŞİMŞİR C.

18th International Metallurgy Materials Congress (IMMC2016), İstanbul, Türkiye, 29 Eylül - 01 Ekim 2016, ss.385-389

Nondestructive Monitoring of the Variations in Microstructure and Residual Stress in the Carburized Steels

Hızlı H., DAVUT K., ŞİMŞİR C., GÜR C. H.

19th World Conference on Non-Destructive Testing, Munich, Almanya, 13 - 17 Haziran 2016

Simulation of Through Hardening of SAE 52100 Steel Bearings Part I Determination of Material Properties

Müstak O., ŞİMŞİR C.

5th International Conference on Distortion Engineering (IDE2015), Bremen, Almanya, 23 - 25 Eylül 2015, ss.456-466

Simulation of Through Hardening of SAE 52100 Steel Bearings Part II Validation at Industrial Scale

Evcil E., Müştak O., ŞİMŞİR C.

5th International Conference on Distortion Engineering (IDE2015), Bremen, Almanya, 23 - 25 Eylül 2015, ss.465-472

Evaluating the Stress State of Steels by Simultaneous X ray Diffraction and Magnetic Barkhausen Noise Measurements during Four point Bending Tests

Öztürk Z., DAVUT K., ŞİMŞİR C.

11th Int Conf on Barkhausen Noise Micromagnetic Testing (ICBM 11), İzmir, Türkiye, 18 - 20 Haziran 2015

Optimization of Sensitivity and Reliability of Magnetic Barkhausen Technique for Detecting Hardness Differences on Quenched and Tempered AISI 4140 Steels

Arslan E., DAVUT K., ŞİMŞİR C.

11th Int Conf on Barkhausen Noise Micromagnetic Testing (ICBM 11), İzmir, Türkiye, 18 - 20 Haziran 2015

Non destructive Characterization of Prior Austenite Structure of AISI D2 Tool Steel by Magnetic Barkhausen Noise Technique

DAVUT K., KILIÇLI V., Murathan Ö. F., ŞİMŞİR C.

11th Int Conf on Barkhausen Noise Micromagnetic Testing (ICBM 11), İzmir, Türkiye, 18 - 20 Haziran 2015

Determination of Flow Curves of the Metastable Austenite

Şimşir C., Müştak O., Davut K., Gür C. H.

International Metallurgy and Materials Engineering Conference (IMMC`2014), İstanbul, Türkiye, 01 Eylül 2014, ss.464-470

Experimental Investigation of Transformation Plasticity of SAE 52100 Bearing Steel

Şimşir C., Müştak O., Davut K., Gür C. H.

2nd International Conference of Metal Forming (METFORM`2014), İstanbul, Türkiye, 01 Ocak 2014

Review on the Heat Treatment Simulation in Gear Manufacturing

Şimşir C., Felde E.

2nd Mediterranean Conference on Heat Treatment and Surface Engineering, Dubrovnik, Hırvatistan, 11 - 13 Haziran 2013, ss.419-428

Simulation and optimization in quenching technology for automotive components

Felde I., Simsir C.

1st International Conference and Exhibition on Heat Treatment and Surface Engineering, HT and SE 2013, Chennai, Hindistan, 16 - 18 Mayıs 2013, ss.145-154

Simulation of the Deformation and Residual Stress Evaluation during Tempering of a Hot Work Tool Steel

Eser A., Bezold A., Bröckmann C., ŞİMŞİR C.

3rd International Conference on Distortion Engineering, IDE 2011, Bremen, Almanya, 14 - 16 Eylül 2011, ss.515-522

Simulation des Verzugs beim Anlassen dickwandiger Bauteile aus 56NiCrMoV7

Şimşir C., Eser A., Bezold A., Broechmann C.

Haerterei Kolloquium 2012, Wiesbaden, Almanya, 10 - 12 Ekim 2012

FEM Modelling of the Distortion of the Blank Case Hardened Gear Blanks due to Chemical Banding

ŞİMŞİR C., Hunkel M., Rentsch R., Lütjens J.

6th International Conference on Quenching and Control of Distortion, Chicago, Illinois, Amerika Birleşik Devletleri, 9 - 13 Eylül 2012, ss.465-476

Tempering of Tool Steels – A Multiscale Simulation

Şimşir C., Eser A., Broeckmann C., Kozeschnik E.

9th International Congress on Tooling, Leoben, Avusturya, 11 - 14 Eylül 2012

Investigation of Surface Residual Stresses on the Deep-Drawn Steel Sheets

Şimşir C., Adıgüzel S., Gür C. H.

16th International Metallurgy and Materials Congress (IMMC`12), İstanbul, Türkiye, 13 - 15 Eylül 2012

Anisotropic Transformation Strain and Its Consequences on Distortion during Austenitization

Şimşir C., Lübben T., Hunkel M., Hoffmann F.

5th International Metallurgy and Materials Engineering Conference (IMMC), İstanbul, Türkiye, 01 Haziran 2012

The Prediction of Distortion of Case Hardened Gear Blanks by Considering the Effect of Prior Manufacturing Operation

ŞİMŞİR C., Hunkel M., Lütjens J., Rentsch R.

3rd International Conference on Distortion Engineering, IDE 2011, Bremen, Almanya, 14 - 16 Eylül 2011

The Prediction of Distortion of Blank Hardened Gear Blanks by Considering the Effect of Prior Manufacturing Operations

ŞİMŞİR C., Eisbrecher I., Hunkel M., Lübben T., Hoffmann F.

The 10th International Conference on Technology of Plasticity, ICTP 2011, Aachen, Almanya, 25 - 30 Eylül 2011, ss.386-391

Simulation of Deformation and Residual Stress Evolution during Quenching and Tempering of Tool Steel

Şimşir C., Eser A., Bezold A., Broeckmann C., Bambauer K.

3rd International Conference on Heat Treatment and Surface Engineering of Tools and Dies, Wels, Avusturya, 01 Ocak 2011, ss.33-42

Metallurgical influence on quench distortion of SAE 52100 long cylinders

Maradit B. P., Simsir C., Lubben T., Gur C. H.

65th ABM International Congress, 18th IFHTSE Congress and 1st TMS/ABM International Materials Congress 2010, Rio de Janeiro, Brezilya, 26 - 30 Temmuz 2010, cilt.6, ss.4833-4841

Prediction of distortions in through hardening of cylindrical steel workpieces by dimensional analysis

Şimşir C., Lübben T., Hoffmann F., Zoch W., Wolff M.

Proceedings of the New Challenges in Heat Treatment and Surface Engineering (CHTSE), Dubrovnik, Hırvatistan, 9 - 12 Haziran 2009, ss.351-358

Investigating the Influence Of Quenching Conditions, Diameter and Material Inhomogenity on Distortion of Steel Shafts

Şimşir C., Maradit B., Lübben T., Gür C. H.

European Congress on Advanced Materials (EUROMAT), Glasgow, Birleşik Krallık, 01 Ocak 2009

A new framework for simulation of heat treatments

ŞİMŞİR C., GÜR C. H.

2nd International Conference on Distortion Engineering (IDE2008), Bremen, Almanya, 17 - 19 Eylül 2008, ss.471-479

Finite element investigation of the effect of hardening behavior of alloys on equal channel angular pressing performance

Karpuz P., Simsir C., GÜR C. H., Kim H. S.

4th International Conference on Nanomaterials by Severe Plastic Deformation, Goslar, Almanya, 18 - 22 Ağustos 2008, ss.1021-1026

Bilgisayar simulasyonu yardımıyla su verme işlemleri sonucunda çelik iş parçalarında oluşan mikroyapının ve kalıntı gerilmelerin tayini

Şimşir C., Gür C. H.

CD Proc of 13th Int Metallurgy-Materials Cong., İstanbul, Türkiye, 9 - 12 Kasım 2006, ss.646-659

Kalıntı Gerilmeler ve Şekil Bozulmasının Tahmini için Çeliklere Su Verme İşleminin Sonlu Eleman Yöntemi ile Simulasyonu

Şimşir C., Gür C. H.

12. Uluslararası Metalurji ve Malzeme Kongresi, İstanbul, Türkiye, 28 Eylül - 02 Ekim 2005, ss.1753-1762

FE Simulation of Steel Quenching to Investigate Residual Stresses and Distortion

ŞİMŞİR C., GÜR C. H.

1st International Conference on Distortion Engineering (IDE2005), Bremen, Almanya, 14 - 16 Eylül 2005, ss.407-414

Kitap & Kitap Bölümleri

Simulation of Quenching

Şimşir C., Gür C. H.

Encyclopedia of Iron, Steel, 1st Edition, R.Colas,G.E.Totten, Editör, CRC, New York , Oxford, ss.2892-2939, 2016

Modelling and Simulation of Steel Heat Treatment: Prediction of Microstructure, Distortion, Residual Stresses and Cracking

ŞİMŞİR C.

ASM Handbook Vol 4B Steel Heat Treatment and Fundamentals, Lumpman, S., Editör, ASM International, Ohio, ss.409-466, 2014

Metrikler

Yayın

Atıf (WoS)

318

H-İndeks (WoS)

Atıf (Scopus)

473

H-İndeks (Scopus)

Atıf (Scholar)

388

Yayınlar & Eserler

Yayın

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Atıf (Scholar)

H-İndeks (Scholar)

Proje

Tez Danışmanlığı

Açık Erişim