Publications & Works

Articles Published in Journals That Entered SCI, SSCI and AHCI Indexes

Excessive damage increase in dual phase steels under high strain rates and temperatures

INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, vol.30, no.2, pp.283-296, 2021 (Journal Indexed in SCI) identifier identifier

A flow stress model for steel in cold forging process range and the associated method for parameter identification

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, vol.94, pp.3795-3808, 2018 (Journal Indexed in SCI) identifier identifier

Dynamic strain aging in DP steels at forming relevant strain rates and temperatures

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol.704, pp.164-172, 2017 (Journal Indexed in SCI) identifier identifier

Simulation of through-hardening of SAE 52100 steel bearings - Part II: Validation at industrial scale

MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, vol.47, no.8, pp.746-754, 2016 (Journal Indexed in SCI) identifier identifier

Simulation of through-hardening of SAE 52100 steel bearings - Part I: Determination of material properties

MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, vol.47, no.8, pp.735-745, 2016 (Journal Indexed in SCI) identifier identifier

Simulation and Optimization in Materials Technology

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, vol.2014, 2014 (Journal Indexed in SCI) identifier identifier

Process-chain simulation for prediction of the distortion of case-hardened gear blanks

MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, vol.43, pp.163-170, 2012 (Journal Indexed in SCI) identifier identifier

A Simulation of the Quenching Process for Predicting Temperature, Microstructure and Residual Stresses

STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, vol.56, no.2, pp.93-103, 2010 (Journal Indexed in SCI) identifier identifier

A review on modeling and simulation of quenching

Journal of ASTM International, vol.6, no.2, 2009 (Journal Indexed in SCI Expanded) identifier

A FEM based framework for simulation of thermal treatments: Application to steel quenching

COMPUTATIONAL MATERIALS SCIENCE, vol.44, no.2, pp.588-600, 2008 (Journal Indexed in SCI) identifier identifier

Articles Published in Other Journals

Transformation Induced Plasticity (TRIP) of SAE 52100 Steel during Martensitic and Bainitic Transformations

Hittite Journal of Science Engineering, vol.4, no.2, pp.125-130, 2017 (Other Refereed National Journals)

Simulation trends in quenching technology for automotive components

International Heat Treatment and Surface Engineering, vol.8, no.1, pp.42-48, 2014 (Refereed Journals of Other Institutions) identifier

Simulation of Quenching: A Review

MATERIALS PERFORMANCE AND CHARACTERIZATION, vol.1, no.1, 2012 (Journal Indexed in ESCI) identifier identifier

Anisotropic Transformation Strain and Its Consequences on Distortion during Austenitization

MATERIALS PERFORMANCE AND CHARACTERIZATION, vol.1, no.1, 2012 (Journal Indexed in ESCI) identifier identifier

Metallurgical influence on quench distortion of SAE 52100 long cylinders

International Heat Treatment and Surface Engineering, vol.5, no.2, pp.57-60, 2011 (Refereed Journals of Other Institutions) identifier

A new framework for simulation of heat treatments

International Journal of Microstructure and Materials Properties, vol.5, pp.399-411, 2010 (Refereed Journals of Other Institutions) identifier

A review on modeling and simulation of quenching

ASTM Special Technical Publication, pp.117-156, 2010 (Refereed Journals of Other Institutions) identifier

Simulation of equal channel angular pressing applied to produce structures with ultrafine-sized grains

International Journal of Microstructure and Materials Properties, vol.4, no.3, pp.356-367, 2009 (Refereed Journals of Other Institutions) identifier

A mathematical framework for simulation of thermal processing of materials: Application to steel quenching

Turkish Journal of Engineering and Environmental Sciences, vol.32, no.2, pp.85-100, 2008 (Refereed Journals of Other Institutions) identifier

A Mathematical Framework for Simulation of Thermal Processing of Materials

Turkish Journal of Engineering and Environmental Sciences, vol.32, pp.85-100, 2008 (Other Refereed National Journals) identifier

Refereed Congress / Symposium Publications in Proceedings

A Material Perspective on Consequences of Deformation Heating During Stamping of DP Steels

International Deep Drawing Research Group (IDDRG), Munich, Germany, 2 - 06 July 2017, vol.896

A Potential Solution to Mystical Materials in Indentation Test

International Conference on the Technology of Plasticity (ICTP), Cambridge, Canada, 17 - 22 September 2017, vol.207, pp.962-967 identifier identifier

Sensitivity Analysis of Distortion of Carburized Steel Shafts Using Computer Simulations

18th International Metallurgy Materials Congress (IMMC2016), İstanbul, Turkey, 29 September - 01 October 2016, pp.385-389

Determination of Factors Influencing Distortion of Carburized Quenching of Steel Shafts Using DoE with Computer Simulations

18th International Metallurgy and Materials Conference (IMMC2016), İstanbul, Turkey, 29 September - 01 October 2016, pp.932-936

Determination of Isothermal Austenite Grain Growth Model Parameters for SAE 8620H Carburizing Steel

18th International Metallurgy and Materials Conference (IMMC2016), İstanbul, Turkey, 29 September - 01 October 2016, pp.485-489

Simulation of Through Hardening of SAE 52100 Steel Bearings Part I Determination of Material Properties

5th International Conference on Distortion Engineering (IDE2015), Bremen, Germany, 23 - 25 September 2015, pp.456-466

Simulation of Through Hardening of SAE 52100 Steel Bearings Part II Validation at Industrial Scale

5th International Conference on Distortion Engineering (IDE2015), Bremen, Germany, 23 - 25 September 2015, pp.465-472

Determination of Flow Curves of the Metastable Austenite

International Metallurgy and Materials Engineering Conference (IMMC`2014), İstanbul, Turkey, 01 September 2014, pp.464-470

Experimental Investigation of Transformation Plasticity of SAE 52100 Bearing Steel

2nd International Conference of Metal Forming (METFORM`2014), İstanbul, Turkey, 01 January 2014

Review on the Heat Treatment Simulation in Gear Manufacturing

2nd Mediterranean Conference on Heat Treatment and Surface Engineering, Dubrovnik, Croatia, 11 - 13 June 2013, pp.419-428

Simulation and optimization in quenching technology for automotive components

1st International Conference and Exhibition on Heat Treatment and Surface Engineering, HT and SE 2013, Chennai, India, 16 - 18 May 2013, pp.145-154 identifier

Simulation of the Deformation and Residual Stress Evaluation during Tempering of a Hot Work Tool Steel

3rd International Conference on Distortion Engineering, IDE 2011, Bremen, Germany, 14 - 16 September 2011, pp.515-522

FEM Modelling of the Distortion of the Blank Case Hardened Gear Blanks due to Chemical Banding

6th International Conference on Quenching and Control of Distortion, Chicago, Illinois, United States Of America, 9 - 13 September 2012, pp.465-476 identifier

Tempering of Tool Steels – A Multiscale Simulation

9th International Congress on Tooling, Leoben, Austria, 11 - 14 September 2012

Investigation of Surface Residual Stresses on the Deep-Drawn Steel Sheets

16th International Metallurgy and Materials Congress (IMMC`12), İstanbul, Turkey, 13 - 15 September 2012

Anisotropic Transformation Strain and Its Consequences on Distortion during Austenitization

5th International Metallurgy and Materials Engineering Conference (IMMC), İstanbul, Turkey, 01 June 2012

The Prediction of Distortion of Case Hardened Gear Blanks by Considering the Effect of Prior Manufacturing Operation

3rd International Conference on Distortion Engineering, IDE 2011, Bremen, Germany, 14 - 16 September 2011

The Prediction of Distortion of Blank Hardened Gear Blanks by Considering the Effect of Prior Manufacturing Operations

The 10th International Conference on Technology of Plasticity, ICTP 2011, Aachen, Germany, 25 - 30 September 2011, pp.386-391 identifier

Simulation of Deformation and Residual Stress Evolution during Quenching and Tempering of Tool Steel

3rd International Conference on Heat Treatment and Surface Engineering of Tools and Dies, Wels, Austria, 01 January 2011, pp.33-42

Metallurgical influence on quench distortion of SAE 52100 long cylinders

65th ABM International Congress, 18th IFHTSE Congress and 1st TMS/ABM International Materials Congress 2010, Rio de Janeiro, Brazil, 26 - 30 July 2010, vol.6, pp.4833-4841 identifier

Prediction of distortions in through hardening of cylindrical steel workpieces by dimensional analysis

Proceedings of the New Challenges in Heat Treatment and Surface Engineering (CHTSE), Dubrovnik, Croatia, 9 - 12 June 2009, pp.351-358

A new framework for simulation of heat treatments

2nd International Conference on Distortion Engineering (IDE2008), Bremen, Germany, 17 - 19 September 2008, pp.471-479

Finite element investigation of the effect of hardening behavior of alloys on equal channel angular pressing performance

4th International Conference on Nanomaterials by Severe Plastic Deformation, Goslar, Germany, 18 - 22 August 2008, pp.1021-1026 identifier identifier

Kalıntı Gerilmeler ve Şekil Bozulmasının Tahmini için Çeliklere Su Verme İşleminin Sonlu Eleman Yöntemi ile Simulasyonu

12. Uluslararası Metalurji ve Malzeme Kongresi, İstanbul, Turkey, 28 September - 02 October 2005, pp.1753-1762

FE Simulation of Steel Quenching to Investigate Residual Stresses and Distortion

1st International Conference on Distortion Engineering (IDE2005), Bremen, Germany, 14 - 16 September 2005, pp.407-414

Books & Book Chapters

Simulation of Quenching

in: Encyclopedia of Iron, Steel, 1st Edition, R.Colas,G.E.Totten, Editor, CRC, New York , Oxford, pp.2892-2939, 2016

Modelling and Simulation of Steel Heat Treatment: Prediction of Microstructure, Distortion, Residual Stresses and Cracking

in: ASM Handbook Vol 4B Steel Heat Treatment and Fundamentals, Lumpman, S., Editor, ASM International, Ohio, pp.409-466, 2014

Simulation of Quenching

in: Quenching Theory and Technology 2nd Edition, Liscic, B., Totten, G.E., Tensi, H.M., Canale, L.C.F., Editor, CRC Press, Taylor Francis Group, New York, pp.603-666, 2010

A Review on Modeling and Simulation of Quenching

in: TP 1523 (Selected Technical Papers) : Quenching and Cooling, Residual Stress and Distortion Control, L.C.F. Canale,M. Narazaki, Editor, ASTM : American Society for Testing and Materials , Ohio, 2010

Simulation of Quenching

in: Handbook of Thermal Process Modeling of Steels, GÜR C.H., PAN, J., Editor, CRC Press, Taylor Francis, New York, pp.341-425, 2009