Assoc. Prof. HAKAN ÇALIŞKAN

Metrics

Publication

Publication (WoS)

Publication (Scopus)

Citation (WoS)

175

H-Index (WoS)

Citation (Scopus)

209

H-Index (Scopus)

Citation (Scholar)

105

H-Index (Scholar)

Project

Thesis Advisory

Open Access

UN Sustainable Development Goals

Education

2009 - 2015

Doctorate

Middle East Technical University, Faculty of Engineering, Makine Mühendisliği Bölümü, Turkey

2006 - 2009

Postgraduate

Middle East Technical University, Faculty of Engineering, Department of Mechanical Engineering, Turkey

2001 - 2006

Undergraduate

Middle East Technical University, Faculty of Engineering, Department of Mechanical Engineering, Turkey

Dissertations

2015

Doctorate

Development and Control of a Single Rod Electro Hydrostatic Actuator

Middle East Technical University, Faculty of Engineering, Department of Mechanical Engineering

2009

Postgraduate

Modeling and experimental evaluation of variable speed pump and valve controlled hydraulic servo drives

Middle East Technical University, Faculty of Engineering, Department of Mechanical Engineering

Research Areas

System Dynamics and Control

Mechatronics

Modeling and Simulation of Dynamic Systems

Research Areas Based on Academic Activities

Avesis Research Areas

WoS Research Areas

Scopus Research Areas

Academic Positions

2026 - Present

Associate Professor

Middle East Technical University, Faculty Of Engineering, Department Of Mechanical Engineering

2019 - 2026

Assistant Professor

Middle East Technical University, Faculty Of Engineering, Department Of Mechanical Engineering

2017 - 2018

Researcher

The University of British Columbia, Engineering, Mechanical

2013 - 2017

Lecturer

Middle East Technical University, Faculty of Engineering, Department of Mechanical Engineering

2006 - 2013

Research Assistant

Middle East Technical University, Faculty of Engineering, Department of Mechanical Engineering

Courses

Undergraduate

Control system design

Numerical Methods

INDUSTRIAL FLUID POWER

Control Systems

Applied Math. for Mechanical Engineers

System Dynamics

Machine Elements

Supervised Theses

in Progress

Postgraduate

YÜKSEK HIZLI ROTOR-RULMAN SİSTEMLERİNİN DİNAMİK MODELLENMESİ

Özşahin O., Çalışkan H. (Co-Advisor)

S.Can(Student)

in Progress

Postgraduate

PNÖMATİK TAHRİKLİ KANARD SİSTEMİNİN MODELLENMESİ VE KONTROLÜ

Özşahin O. (Co-Advisor), Çalışkan H.

M.Can(Student)

in Progress

Postgraduate

MODELLING & ANALYSIS OF A LANDING GEAR SYSTEM

Çalışkan H. (Advisor)

B.Canıtez(Student)

in Progress

Postgraduate

DEVELOPMENT OF PUMP CONTROLLED DOUBLE ROD ELECTRO-HYDROSTATIC ACTUATOR

Çalışkan H. (Advisor)

C.Özbaş(Student)

in Progress

Postgraduate

PREDICTIVE MAINTENANCE OF ELECTROHYDROSTATIC ACTUATOR (EHA)

Çalışkan H., Ertekin Bolelli Ş. (Co-Advisor)

F.Bahçeli(Student)

2024

Postgraduate

MULTI-OBJECTIVE OPTIMIZATION OF ELECTRO-HYDROSTATIC ACTUATORS WITH OCTAGON ARCHITECTURE

Çalışkan H. (Advisor)

Ö.FARUK(Student)

2024

Postgraduate

Modeling and control of a helicopter slung load system

Çalışkan H. (Advisor)

Ö.OĞUZHAN(Student)

2024

Postgraduate

A guidance and control study for a long-range air-to-air missile

Çalışkan H., Özgören M. K. (Co-Advisor)

B.CAN(Student)

2024

Postgraduate

MILLING FORCE ESTIMATION BASED ON SPINDLE MODEL

Çalışkan H., Orguner U. (Co-Advisor)

B.ALTINEL(Student)

2022

Postgraduate

Identification of Position-Dependent Workpiece Dynamics in Milling Process

Özşahin O. (Co-Advisor), Çalışkan H.

B.ALTUN(Student)

2022

Postgraduate

DESIGN AND EVALUATION OF A HELICOPTER MAIN ROTOR ELECTROHYDRAULIC CONTROL SYSTEM

Çalışkan H., Balkan R. T. (Co-Advisor)

H.ALİ(Student)

2022

Postgraduate

Controller design and implementation for a guidance kit used at spinning rockets and projectiles

Çalışkan H. (Co-Advisor), Balkan R. T.

G.GÜNAY(Student)

2019

Postgraduate

Observer based condition monitoring of an electrohydraulic actuation system

Turgut A. E. (Advisor), Çalışkan H. (Co-Advisor)

E.MURAT(Student)

2019

Postgraduate

A functional design methodology with genetic algorithm optimization to a door actuation mechanism

Turgut A. E. (Advisor), Çalışkan H. (Co-Advisor)

H.AKMAN(Student)

Articles

2026

1. Integrated framework for in-process modal analysis and tool-workpiece engagement detection

KAÇAN S. C., ÇALIŞKAN H.

CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY , vol.64, pp.160-170, 2026 (SCI-Expanded, Scopus)

2025

2. Surrogate-Based Convex Optimization for a Two-Stage Oleo-Pneumatic Landing Gear

Canitez B., ÇALIŞKAN H.

OPTIMIZATION AND ENGINEERING , 2025 (SCI-Expanded, Scopus)

2025

3. Automatic chatter suppression in CNC turning of flexible workpieces using extended Kalman filter and spindle speed variation

Özşahin O., Çalışkan H.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , vol.141, no.11, pp.5887-5902, 2025 (SCI-Expanded, Scopus)

2025

4. Milling force estimation based on harmonic force model and acceleration feedback

İlme M., ÇALIŞKAN H., ÖZŞAHİN O.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , vol.137, no.11-12, pp.5735-5749, 2025 (SCI-Expanded, Scopus)

2024

5. Real-Time Milling Chatter Detection and Control with Axis Encoder Feedback and Spindle Speed Manipulation

ÇALIŞKAN H.

Journal of Manufacturing and Materials Processing , vol.8, no.4, 2024 (ESCI, Scopus)

2024

6. Development of a dynamic simulation model for CNC table vibration estimation in milling operations Frezeleme işleminde CNC tabla titreşimlerinin kestirimi için dinamik simülasyon modeli geliştirilmesi

ALTUN B., ÇALIŞKAN H., ÖZŞAHİN O.

Journal of the Faculty of Engineering and Architecture of Gazi University , vol.39, no.3, pp.1703-1718, 2024 (SCI-Expanded, Scopus, TRDizin)

2023

7. Position-dependent FRF identification without force measurement in milling process

Altun B., Çalişkan H., Özşahin O.

International Journal of Advanced Manufacturing Technology , vol.128, no.11-12, pp.4981-4996, 2023 (SCI-Expanded, Scopus)

2022

8. Optimal Design of an In-flight Refueling Door Mechanism

AKMAN H., TURGUT A. E., ÇALIŞKAN H.

Hittite Journal of Science and Engineering , pp.27-36, 2022 (TRDizin)

2020

9. A Model - Based Jamming Detection Method for Electro-Hydrostatic Actuators

Poyraz E. M., TURGUT A. E., ÇALIŞKAN H.

Hittite Journal of Science Engineering , vol.7, no.3, pp.189-198, 2020 (TRDizin)

2019

10. Sensorless control of a three-degree-of-freedom ultrasonic vibration tool holder

Gao J., Caliskan H., Altintas Y.

Precision Engineering , vol.58, pp.47-56, 2019 (SCI-Expanded, Scopus)

2018

11. On-Line Energy-Based Milling Chatter Detection

ÇALIŞKAN H., Kilic Z. M., Altintas Y.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME , vol.140, no.11, 2018 (SCI-Expanded, Scopus)

2015

12. A Complete Analysis and a Novel Solution for Instability in Pump Controlled Asymmetric Actuators

ÇALIŞKAN H., BALKAN R. T., PLATİN B. E.

JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME , vol.137, no.9, 2015 (SCI-Expanded, Scopus)

2014

13. Pressure prediction on a variable-speed pump controlled hydraulic system using structured recurrent neural networks

KILIÇ E., DÖLEN M., ÇALIŞKAN H., KOKU A. B., Balkan T.

CONTROL ENGINEERING PRACTICE , vol.26, pp.51-71, 2014 (SCI-Expanded, Scopus)

2012

14. A control system for hydraulic single axis durability test rig

ÇALIŞKAN H., Balkan T., Platin B. E., Konukseven I. E.

ASME 2012 5th Annual Dynamic Systems and Control Conference Joint with the JSME 2012 11th Motion and Vibration Conference, DSCC 2012-MOVIC 2012 , vol.1, pp.723-732, 2012 (Scopus)

2012

15. Accurate pressure prediction of a servo-valve controlled hydraulic system

KILIÇ E., DÖLEN M., KOKU A. B., ÇALIŞKAN H., Balkan T.

MECHATRONICS , vol.22, no.7, pp.997-1014, 2012 (SCI-Expanded, Scopus)

2012

16. Yapay Sinir Ağ Modellerinin Valf Denetimli Hidrolik Bir Sistemin Uzun Süreli Basınç Tahmininde Kullanılması

KILIÇ E., ÇALIŞKAN H., DÖLEN M., KOKU A. B., BALKAN R. T.

Mühendis ve Makina , vol.53, pp.50-61, 2012 (TRDizin)

Papers Presented at Peer-Reviewed Scientific Conferences

2024

1. A Complete Mathematical Modelling of Milling Spindle and Motor for Force Estimation Studies

Batuhan A., Cumhur Ö., ÇALIŞKAN H.

12th UTIS International Congress on Machining (UTIS2024), Antalya, Turkey, 01 November 2024, pp.359-370, (Full Text)

2024

2. Milling Force Estimation Using Angular Domain Harmonics with Cutting and Edge Coefficients

Mert İ., ÇALIŞKAN H.

20th INTERNATIONAL CONFERENCE ON MACHINE DESIGN AND PRODUCTION (UMTIK2024), Ankara, Turkey, 14 July 2024, pp.183-191, (Full Text)

2023

3. Elektro-Hidrostatik Eyleyicilerde Dinamik Direngenliğin İyileştirilmesi

Özbaş C., Afatsun A. C., ÇALIŞKAN H.

TOK’2023 24. Otomatik Kontrol Ulusal Toplantısı, İstanbul, Turkey, 14 September 2023, pp.897-904, (Full Text)

2022

4. Performance Evaluation of a Helicopter Main Rotor Hydraulic Control System Using Rotor Equivalent Dynamic Parameters

Düzağaç H. A., ÇALIŞKAN H., BALKAN R. T.

International Mechanical Engineering Congress and Exposition IMECE2022, Columbus, Ohio, United States Of America, 30 October 2022, (Full Text)

2022

5. Bir Helikoptere Ait Ana Rotor Hidrolik Kontrol Sisteminin Modellenmesi ve Test Düzeneğiyle Doğrulanmasi

Düzağaç H. A., ÇALIŞKAN H., BALKAN R. T., Erbay E.

IX ULUSAL HİDROLİK PNÖMATİK KONGRESİ (HPKON2022), İzmir, Turkey, 16 - 19 November 2022, pp.504-516, (Full Text)

2022

6. RECURSIVE DEFINING OF FORCE COEFFICIENTS IN MILLING PROCESS WITH ACCELEROMETER

Altun B., Çalışkan H., Özşahin O.

UMTIK 2022, Nevşehir, Turkey, 31 August - 03 September 2022, pp.259-273, (Full Text)

2019

7. HAVA ARAÇLARI İÇİN KAPAK MEKANİZMASI ÖN TASARIMI VE GENETİK ALGORİTMA YÖNTEMİ KULLANILARAK OPTİMİZASYONU

ÇALIŞKAN H., TURGUT A. E., AKMAN H.

19. ULUSAL MAKİNA TEORİSİ SEMPOZYUMU. UMTS 2019, İskenderun, Turkey, 4 - 06 September 2019, (Full Text)

2018

8. Real-time Energy-based Detection of Milling Chatter

ÇALIŞKAN H., KILIÇ Z. M., altintas y.

The 7th International Conference on Virtual Machining Process Technology (VMPT 2018), 7 - 10 May 2018, (Summary Text)

2016

9. A Complete Analysis for Pump Controlled Single Rod Actuator

ÇALIŞKAN H., BALKAN R. T., Platin B. E.

10th International Fluid Power Conference (10. IFK), 8 - 10 March 2016, vol.2, pp.119-132, (Full Text)

2016

10. A Complete Analysis for Pump Controlled Single Rod Actuators

ÇALIŞKAN H., BALKAN R. T., PLATİN B.

10th International FluidPower Conference, Dresden, Germany, 8 - 10 March 2016, (Full Text)

2012

11. A CONTROL SYSTEM FOR HYDRAULIC SINGLE AXIS DURABILITY TEST RIG

ÇALIŞKAN H., BALKAN R. T., PLATİN B. E., KONUKSEVEN E. İ.

5th Annual Dynamic Systems and Control Division Conference / 11th JSME Motion and Vibration Conference, Florida, United States Of America, 17 - 19 October 2012, pp.723-732, (Full Text)

2011

12. 3 Serbestlik Derecesine Sahip Bir Hareket Taklitçisinin Mafsal Uzayı Eniyilemesi ve Çözüm Analizi

DİLAN R. A., YAMAN U., ÇALIŞKAN H., DEMİRER S., BALKAN R. T.

VI. Ulusal Hidrolik Pnömatik Kongresi, İzmir, Turkey, 12 - 15 October 2011, pp.539-552, (Full Text)

2011

13. Yapay Sinir Ağ Modellerinin Valf Denetimli Hidrolik Bir Sistemin Uzun Süreli Basınç Tahmininde Kullanılması

KILIÇ E., ÇALIŞKAN H., DÖLEN M., KOKU A. B., BALKAN R. T.

VI. Ulusal Hidrolik Pnömatik Kongresi, İzmir, Turkey, 12 - 15 October 2011, (Full Text)

2009

14. HYDRAULIC POSITION CONTROL SYSTEM WITH VARIABLE SPEED PUMP

ÇALIŞKAN H., BALKAN R. T., PLATİN B. E.

2nd Annual Dynamic Systems and Control Conference (DSCC 2009)/Bath/ASME Symposium on Fluid Power and Motion Control, California, United States Of America, 12 - 14 October 2009, pp.275-282, (Full Text)

Funded Projects

2022 - 2026

Geleneksel İmalat Teknolojileri İçin Gelişmiş Yaklaşımlar

Project Supported by Higher Education Institutions , BAP Research Project

YAMAN U. (Executive), SÜRER E., DÖLEN M., ÇALIŞKAN H., ÖZŞAHİN O.

2022 - 2024

CNC freze tezgahı tablasının ivme ölçer verileri kullanılarak kesme süreci içerisinde modal tanımlanması

Project Supported by Higher Education Institutions , BAP Other

ÇALIŞKAN H. (Executive), ÖZŞAHİN O., ALTUN B.

2020 - 2021

Eş Zamanlı Tornalama Operasyonlarında Stabilite ve Adaptif Tırlama Kontrolü Sistemi Geliştirilmesi

Project Supported by Other Private Institutions

Özşahin O. (Executive), Çalışkan H.

2019 - 2021

Akıllı CNC: Tırlamanın Gerçek Zamanlı Tanımlanması, Algılanması ve Kontrolü

TUBITAK Project , 1001 - Program for Supporting Scientific and Technological Research Projects

ÇALIŞKAN H. (Executive)

2015 - 2015

Traktörde Ön Yükleyici Uygulaması İçin Hidrolik Sisteminin ve Mekanizmasının Modellemesi Simülasyonu Optimizasyonu ve Geliştirme Projesi

Project Supported by Other Private Institutions

ÇALIŞKAN H.

Peer Reviews in Scientific Publications

May 2021

CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY

SCI Journal

February 2021

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURING

SCI Journal

December 2020

MECHANICAL SYSTEMS AND SIGNAL PROCESSING

SCI Journal

February 2019

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

SCI Journal

Scientific Project Refereeing

November 2022

TUBITAK Project

1501 - Industry R & D Projects Support Program, YUKON MAKİNE MÜHENDİSLİK MİMARLIK VE İNŞAAT SANAYİ DIŞ TİCARET LİMİTED ŞİRKETİ, Turkey

November 2022

TUBITAK Project

1501 - Industry R & D Projects Support Program, ERBEND MAKİNA SANAYİ VE TİCARET ANONİM ŞİRKETİ , Turkey

July 2022

TUBITAK Project

1501 - Industry R & D Projects Support Program, VESTEL ELEKTRONİK SAN. VE TİC. A.Ş. , Turkey

April 2022

TUBITAK Project

1501 - Industry R & D Projects Support Program, NG LOJİSTİK PAZARLAMA YATIRIM VE GAYRİMENKUL A.Ş , Turkey

November 2021

TUBITAK Project

1507 - TÜBİTAK SME R&D Start Support Program, CERVOS UZAY HAVACILIK VE SAVUNMA LTD. ŞTİ. , Turkey

November 2021

TUBITAK Project

1507 - TÜBİTAK SME R&D Start Support Program, ATEK MAKİNA SANAYİ VE TİCARET A.Ş., Turkey

November 2021

TUBITAK Project

1507 - TÜBİTAK SME R&D Start Support Program, STA KALIP MAKİNA SANAYİ VE TİCARET AŞ, Turkey

May 2021

TUBITAK Project

1501 - Industry R & D Projects Support Program, ŞAFAK MAKİNE YEDEK PARÇA SAN. A.Ş., Turkey

May 2021

TUBITAK Project

1501 - Industry R & D Projects Support Program, HELİKOPTERLER İÇİN ASİST SİSTEMİ TASARIM VE İMALATI, Turkey

April 2021

TUBITAK Project

1501 - Industry R & D Projects Support Program, TANPERA TEKNOLOJİ VE ENDÜSTRİYEL ÜRÜNLER SANAYİ VE TİCARET A.Ş., Turkey

November 2020

TUBITAK Project

1501 - Industry R & D Projects Support Program, EAE MAKİNA SAN. VE TİC. A.Ş., Turkey

September 2020

TUBITAK Project

1507 - TÜBİTAK SME R&D Start Support Program, HTS MÜHENDİSLİK İMALAT SANAYİ VE TİCARET LİMİTED ŞİRKETİ, Turkey

April 2020

TUBITAK Project

1507 - TÜBİTAK SME R&D Start Support Program, SÜREKLİ BESLEMELİ SİSTEM KARTON KÖŞEBENT ÜRETİM HATTI, Turkey

March 2020

TUBITAK Project

1501 - Industry R & D Projects Support Program, ERYİĞİT ENDÜSTRİYEL MAK. VE TIBBİ CİH. İML. İTH. İHR. İNŞ. TİC. A.Ş., Turkey

March 2020

TUBITAK Project

1507 - TÜBİTAK SME R&D Start Support Program, PULSAR ROBOTİK SANAYİ VE TİCARET ANONİM ŞİRKETİ , Turkey

February 2020

TUBITAK Project

1501 - Industry R & D Projects Support Program, TURMACH MAKİNE İMALAT SANAYİ VE DIŞ TİCARET A.Ş., Turkey

November 2019

TUBITAK Project

1501 - Industry R & D Projects Support Program, HİDROMEK-HİDROLİK VE MEKANİK MAKİNA İMALAT SAN. VE TİC.A.Ş., Turkey

August 2019

TUBITAK Project

1507 - TÜBİTAK SME R&D Start Support Program, PRUVA KALIP TEKNOLOJİLERİ SANAYİ TİCARET ANONİM ŞİRKETİ, Turkey

August 2019

TUBITAK Project

1507 - TÜBİTAK SME R&D Start Support Program, PRUVA KALIP TEKNOLOJİLERİ SANAYİ TİCARET ANONİM ŞİRKETİ , Turkey

July 2019

TUBITAK Project

1501 - Industry R & D Projects Support Program, ÇAĞ ÇELİK DEMİR VE ÇELİK ENDÜSTRİ A.Ş., Turkey

March 2019

TUBITAK Project

1507 - TÜBİTAK SME R&D Start Support Program, İNVENTRA MÜHENDİSLİK ANONİM ŞİRKET, Turkey

August 2018

TUBITAK Project

1507 - TÜBİTAK SME R&D Start Support Program, HİDROPAR BURSA OTOMASYON HİDROLİK PNÖMATİK MAKİNA SANAYİ VE TİCARET ANONİM ŞİRKETİ , Turkey

June 2017

TUBITAK Project

1511 - TUBITAK Priority Fields Research Technology Development and Innovation PDP, NAİM GÖNCÜ MAKİNE SANAYİ VE TİC. LTD.ŞTİ., Turkey

Congress and Symposium Activities

01 November 2024 - 03 November 2024

12th UTIS International Congress on Machining

Attendee

Antalya-Turkey

01 November 2024 - 04 November 2024

12th UTIS International Congress on Machining,

Attendee

Antalya-Turkey

01 November 2024 - 03 November 2024

12th UTIS International Congress on Machining

Invited Speaker

Antalya-Turkey

01 November 2024 - 04 November 2024

12th UTIS International Congress on Machining

Attendee

Antalya-Turkey

14 August 2024 - 17 August 2024

20th INTERNATIONAL CONFERENCE ON MACHINE DESIGN AND PRODUCTION

Invited Speaker

Ankara-Turkey

14 September 2023 - 16 September 2023

24. OTOMATİK KONTROL ULUSAL TOPLANTISI, TOK2023

Attendee

İstanbul-Turkey

16 November 2022 - 19 November 2022