Publications & Works

Publication Network
Articles 15
All (15)
SCI-E, SSCI, AHCI (13)
SCI-E, SSCI, AHCI, ESCI (13)
Scopus (13)
Other Indexes (2)

1. A SERS Substrate Based on Ultrasonic Stacking of Nanopowders on Thermoplastics

Ulku M. K., Gumustas A., TAMER U., ARIKAN M. A. S., YILDIRIM E.
Journal of Raman Spectroscopy , 2025 (SCI-Expanded) identifier identifier

2. Utilization of cross-correlation function for assessment of replication quality in ultrasonic embossing of microchannels on polymethyl methacrylate

Yildirim E., Ulku M. K., Arikan M. A. S.
Polymer Engineering and Science , vol.64, no.7, pp.3227-3242, 2024 (SCI-Expanded) identifier identifier

3. Investigation of process-affected zone in ultrasonic embossing of microchannels on thermoplastic substrates

Sucularli F., ARIKAN M. A. S., YILDIRIM E.
JOURNAL OF MANUFACTURING PROCESSES , vol.50, pp.394-402, 2020 (SCI-Expanded, Scopus) identifier identifier

4. Investigation on replication of microfluidic channels by hot embossing

Cogun F., Yıldırım E., Arıkan M. A. S.
MATERIALS AND MANUFACTURING PROCESSES , vol.32, pp.1838-1844, 2017 (SCI-Expanded) identifier identifier

5. MEMS Malzeme Karakterizasyonu için Bütünlesik bir Elektrostatik Mikro Bükülme Test Yapısı Tasarımı ve Gerçeklestirilmesi

YILDIRIM E., AKIN T., ARIKAN M. A. S.
Cankaya University Journal of Science and Engineering , vol.9, pp.9-23, 2012 (Peer-Reviewed Journal)

6. MEMS Malzeme Karakterizasyonu için Bütünleşik bir Elektrostatik Mikro Bükülme Test Yapısı Tasarımı ve Gerçekleştirilmesi

YILDIRIM E., ARIKAN M. A. S., AKIN T.
Çankaya Üniversitesi Journal of Science and Engineering , vol.9, pp.9-23, 2012 (Non Peer-Reviewed Journal)

7. Modeling of paint flow rate flux for elliptical paint sprays by using experimental paint thickness distributions

Arikan M., Balkan T.
INDUSTRIAL ROBOT-AN INTERNATIONAL JOURNAL , vol.33, no.1, pp.60-66, 2006 (SCI-Expanded) identifier identifier

8. Direct calculation of AGMA geometry factor J by making use of polynomial equations

Arikan M.
MECHANICS RESEARCH COMMUNICATIONS , vol.29, no.4, pp.257-268, 2002 (SCI-Expanded) identifier identifier

9. A kinematic structure-based classification and compact kinematic equations for six-dof industrial robotic manipulators

Balkan T., Ozgoren M., Arikan M., Baykurt H.
MECHANISM AND MACHINE THEORY , vol.36, no.7, pp.817-832, 2001 (SCI-Expanded, Scopus) identifier identifier

10. Process simulation and paint thickness measurement for robotic spray painting

Arikan M., Balkan T.
CIRP ANNALS-MANUFACTURING TECHNOLOGY , vol.50, no.1, pp.291-294, 2001 (SCI-Expanded, Scopus) identifier identifier

11. A method of inverse kinematics solution including singular and multiple configurations for a class of robotic manipulators

Balkan T., Ozgoren M., Arikan M., Baykurt H.
MECHANISM AND MACHINE THEORY , vol.35, no.9, pp.1221-1237, 2000 (SCI-Expanded) identifier identifier

12. Process modeling, simulation, and paint thickness measurement for robotic spray painting

Arikan M., Balkan T.
JOURNAL OF ROBOTIC SYSTEMS , vol.17, no.9, pp.479-494, 2000 (SCI-Expanded, Scopus) identifier identifier

13. Modeling of paint flow rate flux for circular paint sprays by using experimental paint thickness distribution

Balkan T., Arikan M.
MECHANICS RESEARCH COMMUNICATIONS , vol.26, no.5, pp.609-617, 1999 (SCI-Expanded) identifier identifier

14. PROWELD: an off-line welding robot programming package with an interactive graphical interface

Balkan T., Arikan M., Bulut M.
INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY , vol.12, pp.364-372, 1997 (SCI-Expanded, Scopus) identifier identifier

15. CONTACT STRESS AND SURFACE FATIGUE FAILURE ANALYSIS FOR COMBINED NORMAL AND TANGENTIAL LOADING

ARIKAN M.
TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING , vol.18, no.3, pp.249-267, 1994 (SCI-Expanded, Scopus) identifier identifier
Papers Presented at Peer-Reviewed Scientific Conferences 5

1. An ultrasonic assisted method for fabricating metal layers on thermoplastic substrates for lab-on-a-chip

FARAHANI S., GÜMÜŞTAŞ A., ÜLKÜ M. K., TAMER U., ARIKAN M. A. S., YILDIRIM E.
Microfluidics 2022, Heidelberg, Germany, 11 July 2022, pp.58

2. CHARACTERIZATION OF EMBEDDED MICROCHANNELS FABRICATED BY SLA

Yıldırım E., Yaman U., Arıkan M. A. S.
4th INTERNATIONAL CONGRESS ON 3D PRINTING (ADDITIVE MANUFACTURING) TECHNOLOGIES AND DIGITAL INDUSTRY, Antalya, Turkey, 11 - 14 April 2019

3. Cam Geometry Generation and Optimization for Torsion Bar Systems

Kurtulmus E., ARIKAN M. A. S.
33rd IMAC Conference and Exposition on Structural Dynamics, Florida, United States Of America, 2 - 05 February 2015, pp.459-471 identifier identifier

4. An electrostatically actuated parylene microvalve for lab on a chip applications

YILDIRIM E., ARIKAN M. A. S., KÜLAH H.
16. International Conference on Solid State Sensors, Actuators and Micro Systems, 5 - 09 July 2011, (Full Text) identifier

5. Design and Leakage Characterization of a Microvalve for Parylene Based Lab-on-a-Chip Systems

Yıldırım E., Arıkan M. A. S., Külah H.
4. Mühendislik ve Teknoloji Sempozyumu, Ankara, Turkey, 28 - 29 April 2011, (Full Text)
Metrics

Publication

21

Publication (WoS)

14

Publication (Scopus)

15

Citation (WoS)

170

H-Index (WoS)

7

Citation (Scopus)

209

H-Index (Scopus)

8

Citation (Scholar)

47

H-Index (Scholar)

2

Project

2

Intellectual Property

1

Thesis Advisory

9

Open Access

6