Metrics
Publication
77
Open Access
11
UN Sustainable Development Goals
Biography
Ulas Yaman has been an associate professor of mechanical engineering at the Middle East Technical University (METU), Turkey since September 2019. He received his Ph.D. (2014), MSc (2010), BSc (2007) in mechanical engineering, and minor in mechatronics (2007) degrees from METU. He was a visiting assistant professor of computer science at Purdue University from July 2014 to October 2015. His research interests include 3D printing and additive manufacturing, CAD/CAM architectures, command generation, FPGA-based embedded systems and computational geometry for design and manufacturing.
Education Information
2010 - 2014
2010 - 2014Doctorate
Middle East Technical University, Faculty Of Engineering, Department Of Mechanical Engineering, Turkey
2007 - 2010
2007 - 2010Postgraduate
Middle East Technical University, Faculty Of Engineering, Department Of Mechanical Engineering, Turkey
2004 - 2007
2004 - 2007Undergraduate Minor
Middle East Technical University, Faculty Of Engineering, Department Of Mechanical Engineering, Turkey
2002 - 2007
2002 - 2007Undergraduate
Middle East Technical University, Faculty Of Engineering, Department Of Mechanical Engineering, Turkey
Dissertations
2014
2014Doctorate
Advanced command generation paradigms for CNC systems
Middle East Technical University, Faculty of Engineering, Department of Mechanical Engineering
2010
2010Postgraduate
Design of advanced motion command generators utilizing FPGA
Middle East Technical University, Faculty of Engineering, Department of Mechanical Engineering
Research Areas
Data Compression, Mechanical Engineering, Computer Aided Design and Manufacturing, Non-traditional manufacturing methods, Robotics, Mechatronics, Engineering and Technology
Academic Titles / Tasks
2020 - Continues
2020 - ContinuesAssociate Professor
Middle East Technical University, Faculty Of Engineering, Department Of Mechanical Engineering
2016 - 2020
2016 - 2020Assistant Professor
Middle East Technical University, Faculty Of Engineering, Department Of Mechanical Engineering
2014 - 2015
2014 - 2015Assistant Professor
Purdue University, College Of Scıence, Computer Scıence
2007 - 2014
2007 - 2014Research Assistant
Middle East Technical University, Faculty Of Engineering, Department Of Mechanical Engineering
Managerial Experience
2017 - Continues
2017 - ContinuesDeputy Head of Department
Middle East Technical University, Faculty of Engineering, Department of Mechanical Engineering
Advising Theses
2020
2020Postgraduate
A Continuous Path Planning and Updating Algorithm Based on Voronoi Diagrams
Yaman U. (Consultant)
M.ÖZCAN(Student)
2020
2020Postgraduate
Tiling of cellular structures into the parts according to the density values of SIMP topology optimization
YAMAN U. (Consultant)
D.Özkapıcı(Student)
2019
2019Postgraduate
Attitude and position control of a quadrotor using onboard vision system
Yaman U. (Consultant)
Ş.TÜZEL(Student)
2019
2019Postgraduate
An automated shrinkage compensation method for the holes fabricated via FFF process
Yaman U. (Consultant)
S.VAYGHANNEZHAD(Student)
2019
2019Postgraduate
Generation of optimized Voronoi based interior structures for improved mechnanical properties
Yaman U. (Consultant)
A.CAN(Student)
2019
2019Postgraduate
Swing up and stabilization of rotary inverted pendulum by using on-off type of cold gas thruster actuators
Yaman U. (Consultant)
Y.SİLİK(Student)
2019
2019Postgraduate
Design of a high precision hybrid AM machine
Yaman U. (Co-Consultant), Dölen M.
Y.Emre(Student)
2019
2019Postgraduate
Design and experimental analysis of mechanical force generators for performance improvement of machines
Yaman U. (Co-Consultant), Soylu R.
M.BURAK(Student)
2019
2019Postgraduate
Generation of optimized voronoi based interior structures for improved mechanical properties
YAMAN U. (Consultant)
A.Can(Student)
2018
2018Postgraduate
Improving the strength of additively manufactured objects via modified interior structures
YAMAN U.
C.Mert(Student)
2018
2018Postgraduate
A novel design and fabrication paradigm for 3D printers: Lipro
YAMAN U., DÖLEN M. (Co-Consultant)
V.HASELTALAB(Student)
2018
2018Postgraduate
Improving the strength of additively manufactured objects via modified interior structure
YAMAN U. (Consultant)
C.Mert(Student)
2018
2018Postgraduate
Extracting auxetic patterns from meshes for 3d printing
YAMAN U. (Co-Consultant), SAHİLLİOĞLU Y. (Co-Consultant)
L.MEHMET(Student)
Designed Lessons
Taught Courses And Trainings
Published journal articles indexed by SCI, SSCI, and AHCI
2022
2022Real-time measurement of laser beam characteristics for a waterjet-guided laser machine
Subasi L., GÖKLER M. İ. , YAMAN U.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022 (Peer-Reviewed Journal)
2022
2022Embedding Information into or onto Additively Manufactured Parts: A Review of QR Codes, Steganography and Watermarking Methods
Usama M., Yaman U.
Materials, vol.15, no.7, 2022 (Peer-Reviewed Journal)
2022
2022A process modeling approach for micro drilling of aerospace alloys with a waterjet guided laser system
Subasi L., GÖKLER M. İ. , YAMAN U.
Optics and Laser Technology, vol.148, 2022 (Peer-Reviewed Journal)
2021
2021Current trends and research opportunities in hybrid additive manufacturing
Dilberoğlu M. U. , Gharehpapagh B., Yaman U., Dölen M.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, vol.113, pp.623-648, 2021 (Peer-Reviewed Journal)
2021
2021Toward a Simple Design and Manufacturing Pipeline for Additive Manufacturing
Haseltalab V., DÖLEN M., YAMAN U., Hoffmann C.
IEEE ACCESS, vol.9, pp.107224-107234, 2021 (Peer-Reviewed Journal)
2020
2020Control of Rotary Inverted Pendulum by Using On-Off Type of Cold Gas Thrusters
Silik Y., Yaman U.
ACTUATORS, vol.9, no.4, 2020 (Peer-Reviewed Journal)
2020
2020A fabrication-oriented remeshing method for auxetic pattern extraction
Mert L. M. , Yaman U., Sahillioğlu Y.
TURKISH JOURNAL OF ELECTRICAL ENGINEERING AND COMPUTER SCIENCES, vol.28, pp.1535-1548, 2020 (Peer-Reviewed Journal)
2019
2019Shrinkage compensation approach proposed for ABS material in FDM process
Dilberoglu U. M. , Simsek S., YAMAN U.
Materials and Manufacturing Processes, vol.34, no.9, pp.993-998, 2019 (Peer-Reviewed Journal)
2019
2019Generation of patterned indentations for additive manufacturing technologies
Yaman U., Dölen M., Hoffmann C.
IISE Transactions, vol.51, pp.209-217, 2019 (Peer-Reviewed Journal)
2018
2018A novel command generation paradigm for production machine systems
Yaman U., Dölen M.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, vol.51, pp.25-36, 2018 (Peer-Reviewed Journal)
2018
2018Shrinkage compensation of holes via shrinkage of interior structure in FDM process
Yaman U.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, vol.94, pp.2187-2197, 2018 (Peer-Reviewed Journal)
2016
2016Slice coherence in a query-based architecture for 3D heterogeneous printing
Yaman U., Butt N., Sacks E., Hoffmann C.
COMPUTER-AIDED DESIGN, pp.27-38, 2016 (Peer-Reviewed Journal)
2015
2015A gradient-based morphological method to produce planar curve offsets
Yaman U., Dölen M.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, vol.80, pp.255-274, 2015 (Peer-Reviewed Journal)
2014
2014New morphological methods to generate two-dimensional curve offsets
DÖLEN M., YAMAN U.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, vol.71, pp.1687-1700, 2014 (Peer-Reviewed Journal)
2013
2013Direct command generation for CNC machinery based on data compression techniques
YAMAN U., DÖLEN M.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, vol.29, no.2, pp.344-356, 2013 (Peer-Reviewed Journal)
Articles Published in Other Journals
2020
2020Tiling of Microstructures According to the Density Values of SIMP Topology Optimization
Helvaci D. O. , YAMAN U.
Procedia Manufacturing, vol.51, pp.1033-1037, 2020 (Peer-Reviewed Journal)
2020
2020Multi objective optimization of water jet guided laser micro drilling on Inconel 718 using Taguchi Method
Subasi L., GÖKLER M. İ. , YAMAN U.
Procedia CIRP, vol.94, pp.505-510, 2020 (Peer-Reviewed Journal)
2019
2019Fabrication of Topologically Optimized Parts via Direct 3D Printing
Yaman U.
Gazi Üniversitesi Fen Bilimleri Dergisi Part: C Tasarım ve Teknoloji, vol.7, no.1, pp.236-244, 2019 (Peer-Reviewed Journal)
2017
2017A New Method for Generating Image Projections in DLP-type 3D Printer Systems
YAMAN U., DÖLEN M., Dilberoglu U. M. , GHAREHPAPAGH B.
Procedia Manufacturing, vol.11, pp.490-500, 2017 (Peer-Reviewed Journal)
2017
2017The Role of Additive Manufacturing in the Era of Industry 4.0
Dilberoglu U. M. , GHAREHPAPAGH B., YAMAN U., DÖLEN M.
Procedia Manufacturing, vol.11, pp.545-554, 2017 (Peer-Reviewed Journal)
Refereed Congress / Symposium Publications in Proceedings
2021
2021Use of a nozzle with a rectangular orifice on a hybrid FFF system
Gharehpapagh B., Dilberoğlu M. U. , Dölen M., Yaman U.
Additive Manufacturing Conference, İstanbul, Turkey, 9 - 10 September 2021, vol.1, no.577, pp.1-5
2020
2020Experimental Setup for a Novel Mechanical Force Generator
Ekinci M. B. , YAMAN U., SOYLU R.
2020 IEEE 16th International Workshop on Advanced Motion Control (AMC), Kristiansand, Norway, 14 - 16 September 2020
2019
2019Predicting the Effective Cutting Length of Laser Micro Jet Process Using Machine Learning
Subaşı L., GÖKLER M. İ. , YAMAN U.
International Conference and Exhibition on Digital Transformation and Smart Systems, Ankara, Turkey, 23 - 25 October 2019
2019
2019Single axis attitude controller design using pulse width modulated thruster
Silik Y., Yaman U.
20th International Conference on Research and Education in Mechatronics, REM 2019, Wels, Austria, 23 - 24 May 2019
2019
2019CHARACTERIZATION OF EMBEDDED MICROCHANNELS FABRICATED BY SLA
Yıldırım E., Yaman U., Arıkan M. A. S.
4th INTERNATIONAL CONGRESS ON 3D PRINTING (ADDITIVE MANUFACTURING) TECHNOLOGIES AND DIGITAL INDUSTRY, Antalya, Turkey, 11 - 14 April 2019
2019
2019Effect of lattice structures on natural frequency of SLA fabricated parts
Kayiran A. M. , Yaman U.
25th International Conference on Production Research Manufacturing Innovation: Cyber Physical Manufacturing, ICPR 2019, Illinois, United States Of America, 9 - 14 August 2019, vol.39, pp.533-538
2019
2019A Cloud Manufacturing Application for Additive Manufacturing Methods
Haseltalab V., Yaman U.
IEEE International Conference on Mechatronics (ICM), Ilmenau, Germany, 18 - 20 March 2019, pp.287-292
2019
2019Investigation of variable bead widths in FFF process
Gharehpapagh B., Dölen M., Yaman U.
29th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2019, Limerick, Ireland, 24 - 28 June 2019, vol.38, pp.52-59
2019
2019A continuous path planning approach on Voronoi diagrams for robotics and manufacturing applications
Özcan M., Yaman U.
29th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2019, Limerick, Ireland, 24 - 28 June 2019, vol.38, pp.1-8
2019
2019Embedding QR codes on the interior surfaces of FFF fabricated parts
Gültekin S., Ural A., Yaman U.
25th International Conference on Production Research Manufacturing Innovation: Cyber Physical Manufacturing, ICPR 2019, Illinois, United States Of America, 9 - 14 August 2019, vol.39, pp.519-525
2019
2019Simulator of an additive and subtractive type of hybrid manufacturing system
Dilberoğlu M. U. , Haseltalab V., Yaman U., Dölen M.
29th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2019, Limerick, Ireland, 24 - 28 June 2019, vol.38, pp.792-799
2019
2019Generation of optimized voronoi based interior structures for improved mechanical properties
Öncel A. C. , Yaman U.
29th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2019, Limerick, Ireland, 24 - 28 June 2019, vol.38, pp.42-51
2018
2018Effects of Annealing on the Structure and Mechanical Properties of 3D Printed PLA Components
Aydın S., Yaman U., Özerinç S.
First International Conference on Advances in Mechanical and Mechatronics Engineering, Ankara, Turkey, 8 - 09 November 2018
2018
2018Automated Image Processing for Scratch Detection on Specular Surfaces
Okbay V., Akar G., Yaman U.
International Conference and Exhibition on Digital Transformation and Smart Systems, Ankara, Turkey, 24 - 26 October 2018
2018
2018Implications of Direct Digital Manufacturing on Sustainable Supply Chain Management
ALTEKİN F. T. , YAMAN U.
International Conference and Exhibition on Digital Transformation and Smart Systems, Ankara, Turkey, 24 - 26 October 2018
2018
2018Comprehensive Analysis of the Shrinkage Compensation Approach Proposed for the FDM process
DİLBEROĞLU M. U. , SIMSEK Ş., YAMAN U.
International Conference on Flexible Automation and Intelligent Manufacturing, Columbus, United States Of America, 11 - 14 June 2018
2018
2018Tuning the Center of Gravity of 3D Printed Artifacts
Keleş M., Yaman U.
28th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2018, Ohio, United States Of America, 11 - 14 June 2018, vol.17, pp.371-378
2018
2018Topology optimization of 2.5D parts using the SIMP method with a variable thickness approach
Kandemir V., Doğan O., Yaman U.
Flexible Automation and Intelligent Manufacturing, Ohio, United States Of America, 10 - 14 June 2018, vol.17, pp.29-36
2018
2018Utilization of Curve Offsets in Additive Manufacturing
HASELTALAB V., YAMAN U., DÖLEN M.
21st International ESAFORM Conference on Material Forming (ESAFORM), Palermo, Italy, 23 - 25 April 2018, vol.1960
2018
2018An Automated Design and Fabrication Pipeline for Improving the Strength of 3D Printed Artifacts under Tensile Loading
AL C. M. , YAMAN U.
21st International ESAFORM Conference on Material Forming (ESAFORM), Palermo, Italy, 23 - 25 April 2018, vol.1960
2017
2017Soğuk Gaz İtki Kontrol Sisteminin Pnömatik Akış Kontrolünün Benzetimi
SİLİK Y., TANIKER S., YAMAN U.
VIII. Ulusal Hi̇droli̇k Pnömati̇k Kongresi, Turkey, 22 - 25 November 2017, pp.505-519
2017
2017Current Trends and Research Opportunities in Hybrid Manufacturing
Gharehpapagh B., Dilberoğlu U. M. , YAMAN U., DÖLEN M.
EUSIPCO 2017 - W4 Creative Design and Advanced Manufacturing: An emerging application area for Signals and Systems, Kos, Greece, 02 September 2017
2017
2017Formation of Patterned Indentations for Additive Manufacturing Applications
YAMAN U., DÖLEN M., Hoffmann C.
EUSIPCO 2017 - W4 Creative Design and Advanced Manufacturing: An emerging application area for Signals and Systems, Kos, Greece, 02 September 2017
2017
2017Improving the strength of additively manufactured objects via modified interior structure
AL C. M. , YAMAN U.
20th International ESAFORM Conference on Material Forming, ESAFORM 2017, Dublin, Ireland, 26 - 28 April 2017, vol.1896
2016
2016Dimensional accuracy improvement of fused filament fabrication holes utilizing modified interior
Sımsek S., Yaman U.
19th International Conference on Electrical Machines and Systems, ICEMS 2016, Chiba, Japan, 13 - 16 November 2016
2016
2016A Command Generation Approach for Desktop Fused Filament Fabrication 3D Printers
YAMAN U., DÖLEN M.
42nd Annual Conference of the IEEE-Industrial-Electronics-Society (IECON), Florence, Italy, 24 - 27 October 2016, pp.4582-4587
2014
2014A New Hardware-in-the-Loop Simulator for Control Engineering Education
USENMEZ S., YAMAN U., DOLEN M., KOKU A. B.
IEEE Global Engineering Education Conference, İstanbul, Turkey, 3 - 05 April 2014, pp.1-8
2013
2013Hareket Denetimi Uygulamalarında Kullanılan Sayısal Filtrelerin FPGA ile Gerçekleştirilmesi
YAMAN U., MUTLU B. R. , DÖLEN M., KOKU A. B.
Türk Otomatik Kontrol Ulusal Toplantısı (TOK13), Malatya, Turkey, 26 - 28 September 2013, pp.388-393
2013
2013Servo Motor Sürücü Sistemleri İçin Geliştirilen Hareket Komut Üretecinin FPGA ile Gerçekleştirilmesi
YAMAN U., DÖLEN M.
Otomatik Kontrol Ulusal Toplantısı, TOK2013, Malatya, Turkey, 26 - 28 September 2013, pp.420-425
2013
2013A New Hardware-in-the-Loop Simulator for CNC Machine Applications
USENMEZ S., MUTLU B. R. , Yaman U., KILIÇ E., Dolen M., Koku A. B.
IEEE International Conference on Mechatronics (ICM), Vicenza, Italy, 27 February - 01 March 2013
2011
20113 Serbestlik Derecesine Sahip Bir Hareket Taklitçisinin Mafsal Uzayı Eniyilemesi ve Çözüm Analizi
DİLAN R. A. , YAMAN U., ÇALIŞKAN H., DEMİRER S., BALKAN R. T.
VI. Ulusal Hidrolik Pnömatik Kongresi, İzmir, Turkey, 12 - 15 October 2011, pp.539-552
2011
2011Dağ Treni Hidrolik Fırlatma Sistemi Tasarımı
YAMAN U., KONUKSEVEN E. İ. , AKOVA H. U. , DEMİRER S.
VI. Ulusal Hidrolik Pnömatik Kongresi, İzmir, Turkey, 12 - 15 October 2011, pp.3-12
2011
2011Evaluation of compression algorithms for motion command generation
YAMAN U., DÖLEN M.
2011 IEEE International Conference on Mechatronics, ICM 2011, İstanbul, Turkey, 13 - 15 April 2011, pp.45-50
2010
2010A novel command generation method with variable feedrate utilizing FPGA for motor drives
Yarnan U., DÖLEN M., KOKU A. B.
2010 8th IEEE Workshop on Intelligent Solutions in Embedded Systems, WISES 2010, Heraklion, Greece, 8 - 09 July 2010, pp.67-72
2010
2010Polymorphic robotic system controlled by an observing camera
KOCER B., YUKSEL T., YUMER M. E. , Ozen C. A. , YAMAN U.
2nd International Conference on Digital Image Processing, Singapore, Singapore, 26 - 28 February 2010, vol.7546
2009
2009Performance Evaluation of Different Real-Time Motion Controller Topologies Implemented on a FPGA
MUTLU B. R. , YAMAN U., DÖLEN M., KOKU A. B.
12th International Conference on Electrical Machines and Systems, Tokyo, Japan, 15 - 18 November 2009, pp.902-907
2009
2009Direct Command Generation Methods for Servo-Motor Drives
YAMAN U., MUTLU B. R. , DÖLEN M., KOKU A. B.
12th International Conference on Electrical Machines and Systems, Tokyo, Japan, 15 - 18 November 2009, pp.1354-1359
2009
2009Kayan Kipli DC Motor Konum Denetiminin FPGA ile Gerçekleştirilmesi
MUTLU B. R. , YAMAN U., DÖLEN M., KOKU A. B.
Türk Otomatik Kontrol Ulusal Toplantısı (TOK09), İstanbul, Turkey, 13 - 16 October 2009
2009
2009Endüstriyel Kontrol Uygulamaları İçin Komut Üretim Yöntemleri
YAMAN U., DÖLEN M., KOKU A. B.
Otomatik Kontrol Ulusal Toplantısı, TOK2009, İstanbul, Turkey, 13 - 16 October 2009
2009
2009Endüstriyel Kontrol Uygulamaları için Komut Üretim Yöntemleri
YAMAN U., DÖLEN M., KOKU A. B.
Türk Otomatik Kontrol Ulusal Toplantısı (TOK09), Turkey, 13 - 16 October 2009
2008
2008Çevrimiçi Donanım Benzetimi için Yeni bir Yazılım Paketi: Cadmus
ÜŞENMEZ s., DİLAN R. A. , YAMAN U., MUTLU B. R. , DÖLEN M., KOKU A. B.
Türk Otomatik Kontrol Ulusal Toplantısı (TOK08), İstanbul, Turkey, 13 - 15 November 2008
2008
2008Sayısal Kontrol Mühendisliği Eğitiminde Yeni Araçlar ve Yaklaşımlar
MUTLU B. R. , YAMAN U., ÜŞENMEZ s., DİLAN R. A. , DÖLEN M., KOKU A. B.
Türk Otomatik Kontrol Ulusal Toplantısı (TOK08), İstanbul, Turkey, 13 - 15 November 2008
2008
2008Çevrimiçi Donanım Benzetimi İçin Yeni bir Yazılım Paketi Cadmus
ÜŞENMEZ S., DİLAN R. A. , YAMAN U., MUTLU B. R. , DÖLEN M., KOKU A. B.
Otomatik Kontrol Ulusal Toplantısı, TOK2008, İstanbul, Turkey, 13 - 15 November 2008, vol.1, pp.685-691
2008
2008Graduate Student Education in Discrete-time Control
YAMAN U., ÜŞENMEZ s., MUTLU B. R. , DÖLEN M., KOKU A. B.
Proc. of the 13th International Conference on Machine Design and Production (UMTIK 2008), İstanbul, Turkey, 3 - 05 September 2008
Supported Projects
2018 - Continues
2018 - Continues3B Yazıcılar ile Üretilen ve Negatif Poisson Oranına Sahip İç Yapılar ile Nesnelerin Geometrik Doğruluklarının Arttırılması
Project Supported by Higher Education Institutions
YAMAN U. (Executive)
2022 - 2024
2022 - 2024
RecMine - Environmental footprint reduction through eco-friendly technologies of mine tailings recycling
TÜBİTAK International Multi-Cooperation Project
Akgül Ç. (Executive), Ercan B., Yaman U., Saritaş A., Gürsel Dino I.
2021 - 2024
2021 - 2024MIDDLE EAST TECHNICAL UNIVERSITY DIGITAL INNOVATION CENTER
AB IPA Project
(Project Abstract)
Gökler M. İ. (Executive), Akar G., Yaman U., Köksal G., Eren P. E. , Ertekin Bolelli Ş., et al.
2017 - 2020
2017 - 2020Eklemeli Ve Talaşlı İmalât Yöntemlerini Kullanan Melez Ve Akıllı Bir Üretim Sisteminin Geliştirilmesi
TUBITAK Project
YAMAN U. (Executive)
2017 - 2018
2017 - 2018Hava Vanaları Test Düzeneği Araştırma ve Tasarımı
Project Supported by Other Private Institutions
YAMAN U.
2017 - 2018
2017 - 2018Sac Malzeme İçin Görüntü İşleme İçeren Akıllı Üretim Hücresi Tasarımı Ar-Ge Projesi
Project Supported by Other Private Institutions
YAMAN U.
2017 - 2018
2017 - 20183b Yazıcılar İçin Yeni Bir Tasarım Ve Üretim Akışı: Lipro
TUBITAK Project
YAMAN U. (Executive)
2017 - 2017
2017 - 2017DÖRT PERVANELİ ROBOT HELİKPTERLERİN YÜKSEK HASSASİYET İLE DENETİMİ
Project Supported by Higher Education Institutions
YAMAN U. (Executive)
2016 - 2016
2016 - 20163B Yazıcılar ile Üretilmiş Nesnelerin Boyutsal Doğruluklarının Geliştirilmesi
Project Supported by Higher Education Institutions
YAMAN U. (Executive)
Patent
2019
2019BİR TOZ YATAĞI ÜZERİNDE ERİYİK FİLAMENT İLE ÜRETİM YÖNTEMİ
Patent
Pending / Applied, The Invention Recourse Number: PCT/TR2019/050801 , Standard Registration
Activities in Scientific Journals
2021 - Continues
2021 - ContinuesJournal of Additive Manufacturing Technologies
Committee Member
2020 - Continues
2020 - ContinuesJournal Of The Faculty Of Engineering And Architecture Of Gazi University
Assistant Editor
Memberships / Tasks in Scientific Organizations
2021 - Continues
2021 - ContinuesEntrepreneurship Research Center
Board Member
2018 - Continues
2018 - ContinuesMETU Welding Technology and Non-Destructive Testing Research / Application Center
Board Member
2018 - Continues
2018 - ContinuesTurkish Additive Manufacturing Association
Member
2017 - Continues
2017 - ContinuesMakina Teorisi Derneği
Member
2020 - 2021
2020 - 2021Turkish Additive Manufacturing Association
Vice President
2020 - 2021
2020 - 2021IISE
Member
2017 - 2021
2017 - 2021Makina Teorisi Derneği
Board Member
2011 - 2021
2011 - 2021IEEE
Member
Scientific Refereeing
December 2021
December 2021MATERIALS
Journal Indexed in SCI-E
November 2021
November 2021MATERIALS
Journal Indexed in SCI-E
September 2021
September 2021Int. J. of Mechatronics and Manufacturing Systems
Other Indexed Journal
July 2021
July 2021CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY
Journal Indexed in SCI-E
July 2021
July 2021Int. J. of Mechatronics and Manufacturing Systems
Other Indexed Journal
April 2021
April 2021SCIENTIFIC REPORTS
Journal Indexed in SCI-E
January 2021
January 2021COMPUTER-AIDED DESIGN
SCI Journal
August 2020
August 2020IEEE PERVASIVE COMPUTING
Journal Indexed in SCI-E
February 2020
February 2020MAKİNA TASARIM VE İMALAT DERGİSİ
National Scientific Refreed Journal
September 2019
September 2019ULUDAĞ ÜNİVERSİTESİ MÜHENDİSLİK FAKÜLTESİ DERGİSİ
National Scientific Refreed Journal
August 2019
August 2019TUBITAK Project
1501 - Industry R & D Projects Support Program, Middle East Technical University, Turkey
June 2019
June 2019COMPUTERS AND ELECTRONICS IN AGRICULTURE
Journal Indexed in SCI-E
May 2019
May 2019Mühendislik Bilimleri ve Tasarım Dergisi
National Scientific Refreed Journal
November 2018
November 2018Project Supported by Higher Education Institutions
BAP Research Project, Middle East Technical University, Turkey
July 2018
July 2018Makina Tasarım ve İmalat Dergisi
Other Journals
July 2018
July 2018TUBITAK Project
May 2018
May 2018Project Supported by Higher Education Institutions
February 2018
February 2018TUBITAK Project
January 2018
January 2018Project Supported by Higher Education Institutions
December 2017
December 2017Makina Tasarım ve İmalat Dergisi
National Scientific Refreed Journal
December 2017
December 2017TUBITAK Project
December 2017
December 2017TUBITAK Project
December 2017
December 2017TUBITAK Project
December 2017
December 2017TUBITAK Project
December 2017
December 2017TUBITAK Project
November 2017
November 2017Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
SCI Journal
September 2017
September 2017Computer-Aided Design
SCI Journal
August 2017
August 2017Computer-Aided Design
SCI Journal
August 2017
August 2017Makina Tasarım ve İmalat Dergisi
National Scientific Refreed Journal
June 2017
June 2017Computer-Aided Design
SCI Journal
June 2017
June 2017Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
SCI Journal
May 2017
May 2017Computer-Aided Design
SCI Journal
April 2017
April 20173D Research
Other Indexed Journal
April 2017
April 2017Makina Tasarım ve İmalat Dergisi
National Scientific Refreed Journal
March 2017
March 20173D Research
Other Indexed Journal
January 2017
January 2017Computer-Aided Design
SCI Journal
December 2016
December 2016Project Supported by Higher Education Institutions
November 2016
November 2016Project Supported by Higher Education Institutions
Scientific Consultations
2021 - 2021
2021 - 2021Scientific Consultancy
Technology Development Foundation of Turkey
Middle East Technical University, Faculty Of Engineering, Department Of Mechanical Engineering, Turkey
Tasks In Event Organizations
Eylül 2021
Eylül 2021Additive Manufacturing Conference
Scientific Congress
Yaman U.
İstanbul, Turkey
Aralık 2020
Aralık 2020TAMA Additive Days
Workshop Organization
Yaman U., Kaynak Y., Kayacan M. C.
Turkey
Ekim 2019
Ekim 2019International Conference & Exhibition on Digital Transformation & Smart Systems (DTSS 2019)
Scientific Congress
Yaman U.
Ankara, Turkey
Ekim 2019
Ekim 2019II. International Conference & Exhibition on DIGITAL TRANSFORMATION & SMART SYSTEMS
Scientific Congress
Eren P. E. , Atalay M. V. , Erkmen A. M. , Ertekin Bolelli Ş., Gürel S., Oğuztüzün M. H. S. , et al.
Turkey
Ekim 2018
Ekim 2018Digital Transformation & Smart Systems (DTSS 2018)
Scientific Congress
Yaman U.
Ankara, Turkey
Awards
November 2020
November 2020IISE Transactions Tasarım ve Üretim Alanında En Iyi Uygulama Makalesi
Institute Of Industrial And Systems Engineers (Iise)
November 2020
November 2020Best Design and Manufacturing Application Paper
Iıse
August 2018
August 20183D Printing: Design, Analysis and Fabrication
Tübitak
Congress and Symposium Activities
01 November 2018 - 01 November 2018
01 November 2018 - 01 November 2018International Conference on Advances in Mechanical and Mechatronics Engineering
Attendee
Ankara-Turkey
01 October 2018 - 01 October 2018
01 October 2018 - 01 October 2018International Conference & Exhibition on Digital Transformation & Smart Systems
Attendee
Ankara-Turkey
01 July 2018 - 01 July 2018
01 July 2018 - 01 July 2018European Solid Mechanics Conference
Attendee
Bologna-Italy
01 June 2018 - 01 June 2018
01 June 2018 - 01 June 2018International Conference on Flexible Automation and Intelligent Manufacturing
Attendee
Ohio-United States Of America
01 June 2018 - 01 June 2018
01 June 2018 - 01 June 2018International Conference on Flexible Automation and Intelligent Manufacturing
Session Moderator
Ohio-United States Of America
01 April 2018 - 01 April 2018
01 April 2018 - 01 April 2018International ESAFORM Conference on Material Forming
Attendee
Palermo-Italy
01 November 2017 - 01 November 2017
01 November 2017 - 01 November 2017Hidrolik Pnömatik Kongresi
Attendee
İzmir-Turkey
01 September 2017 - 01 September 2017
01 September 2017 - 01 September 2017European Signal Processing Conference
Attendee
-Greece
01 June 2017 - 01 June 2017
01 June 2017 - 01 June 2017International Conference on Flexible Automation and Intelligent Manufacturing
Attendee
Modena-Italy
01 April 2017 - 01 April 2017
01 April 2017 - 01 April 2017International ESAFORM Conference on Material Forming
Attendee
Dublin-Ireland
01 November 2016 - 01 November 2016
01 November 2016 - 01 November 2016International Conference on Electrical Machines and Systems
Attendee
Chiba-Japan
01 October 2016 - 01 October 2016
01 October 2016 - 01 October 2016IEEE Industrial Electronics Conference
Attendee
Florence-Italy
01 April 2014 - 01 April 2014
01 April 2014 - 01 April 2014IEEE Global Engineering Education Conference
Attendee
İstanbul-Turkey
01 September 2013 - 01 September 2013
01 September 2013 - 01 September 2013Otomatik Kontrol Ulusal Toplantısı
Attendee
Malatya-Turkey
01 February 2013 - 01 February 2013
01 February 2013 - 01 February 2013IEEE International Conference on Mechatronics
Attendee
Vicenza-Italy
01 October 2011 - 01 October 2011
01 October 2011 - 01 October 2011Hidrolik Pnömatik Kongresi
Attendee
İzmir-Turkey
01 April 2011 - 01 April 2011
01 April 2011 - 01 April 2011IEEE International Conference on Mechatronics
Attendee
İstanbul-Turkey
01 July 2010 - 01 July 2010
01 July 2010 - 01 July 2010IEEE Workshop on Intelligent Solutions in Embedded Systems
Attendee
Heraklion-Greece
01 February 2010 - 01 February 2010
01 February 2010 - 01 February 2010International Conference of Digital Image Processing
Attendee
Singapore-Singapore
01 November 2009 - 01 November 2009
01 November 2009 - 01 November 2009International Conference on Electrical Machines and Systems
Session Moderator
Tokyo-Japan
01 November 2009 - 01 November 2009
01 November 2009 - 01 November 2009International Conference on Electrical Machines and Systems
Attendee
Tokyo-Japan
01 October 2009 - 01 October 2009
01 October 2009 - 01 October 2009Otomatik Kontrol Ulusal Toplantısı
Attendee
İstanbul-Turkey
01 November 2008 - 01 November 2008
01 November 2008 - 01 November 2008Otomatik Kontrol Ulusal Toplantısı
Attendee
-Turkey
01 September 2008 - 01 September 2008
01 September 2008 - 01 September 2008International Conference on Machine Design and Production
Attendee
İstanbul-Turkey
Invited Talks
May 2022
May 2022Eklemeli Düşünmek Konferansı
Conference
İstanbul Teknik Üniversitesi-Turkey
October 2021
October 2021Çok Eksenli Eklemeli İmalat
Seminar
Makina Mühendisleri Odası-Turkey
April 2021
April 2021Dijital Üretim 101
Seminar
Akademi 4.0-Turkey
December 2020
December 2020