Yönetilen Tezler
-
Effect of build direction on crack growth behavior of Ti6Al4V alloy manufactured by electron beam melting
GÜRBÜZ R. (Danışman)
F.ÇALIK(Öğrenci), Yüksek Lisans, 2022 -
The influence of manufacturing defects on structural performance of composite overwrapped pressure vessels
GÜRBÜZ R. (Danışman)
K.YURDAKUL(Öğrenci), Yüksek Lisans, 2022 -
Effect of heat treatment parameters on the q-factor of FE-NI superalloys
GÜRBÜZ R. (Danışman)
A.EMRE(Öğrenci), Yüksek Lisans, 2022 -
kaynaklı API 5L x70 boru hattı çeliğinin yorulma davranışı
GÜRBÜZ R. (Danışman)
-
The effects of chromic acid anodizing on fatigue behavior of (AMS4050) 7050 T7451 aluminum alloy
GÜRBÜZ R. (Danışman)
-
Kadmiyum kaplanmış yüksek mukavemetli bir çelikte hidrojenin yorulma davranışına etkileri.
GÜRBÜZ R. (Danışman)
-
The effects of heat treatment on microstructure, hardness and fatigue behavior of (AMS5659) 15-5 precipitation hardenable stainless steel
GÜRBÜZ R. (Danışman)
-
Solvent extraction of scandium from pregnant leach solution of nickel laterites
GÜRBÜZ R. (Eş Danışman), TOPKAYA Y. A. (Eş Danışman)
-
AN INVESTIGATION ON FATIGUE CRACK PROPAGATION IN GAS METAL AND HYBRID PLASMA-GAS METAL ARC WELDMENTS OF AA5083-H111
YURTIŞIK K. (Eş Danışman), GÜRBÜZ R. (Eş Danışman)
-
Determination of fracture and fatigue behaviours of 4340 steel
-
Fracture and fatigue crack growth characterization of conventional and head hardened railway rail steels
GÜRBÜZ R. (Danışman)
-
Kinetics and microstructural analysis of fatigue fracture progress in weld joints of duplex stainless steel grade 2205
GÜRBÜZ R. (Danışman)
-
Mode II fatigue crack growth behavior and mode II fracture toughness of 7050 aluminum alloy in two orientations
GÜRBÜZ R. (Danışman)
E.YURTOĞLU(Öğrenci), Yüksek Lisans, 2013 -
7050 alüminyum alaşımının iki oryantasyonda MOD II yorulma çatlak ilerleme davranışı ve MOD II kırılma tokluğu.
GÜRBÜZ R. (Danışman)
-
Determination of stress intensity factors in cracked panels reinforced with riveted stiffeners
-
Evaluation of effect of fillet rolling process on the fatigue performance of a diesel engine crankshaft
GÜRBÜZ R. (Danışman)
-
Microstructural and mechanical characterization of duplex stainless steel grade 2205 joined by hybrid plasma and gas metal arc welding
-
Microstructural and mechanical characterization of metal active gas welded joint between cast iron and low carbon steel
BATIGÜN C. (Eş Danışman), GÜRBÜZ R. (Eş Danışman)
-
Effect of welding parameters on the hot cracking behavior of 7039 aluminum-zinc alloy
BATIGÜN C. (Eş Danışman), GÜRBÜZ R. (Eş Danışman)
-
Fatigue crack growth behaviour of AA6013 aluminum alloy at different aging conditions
GÜRBÜZ R. (Danışman)
-
Effect of retrogression and reaging heat treatment on corrosion fatigue crack growth behavior of AA7050 alloy
GÜRBÜZ R. (Danışman)
-
Effect of temperature on fatigue properties of DIN 35 NiCrMoV 12 5 steel
GÜRBÜZ R. (Danışman)
-
A study on flexural strength of layered al-sic composites produced by powder metallurgy methods
-
Study of salt-water cracking behavior of 7050 T73651 aluminum alloy through slow strain rate testing under potentiostatic control
GÜRBÜZ R. (Danışman)
E.KUŞ(Öğrenci), Yüksek Lisans, 2002 -
A Study on flexural strength of layered Al-SiCp composites produced by powder metallurgy methods
-
Hot pressing studies in Al-Cu-Mg-SiC system
-
Mechanical properties of PM Al-Sic composites produced by conventional hot-pressing method
-
Mechanical properties of PM AI-Sic compasides produced by conventional hot-pressing method
GÜRBÜZ R. (Danışman)
G.KAYA(Öğrenci), Yüksek Lisans, 1999 -
The Fracture behaviour of fiber reinforced acrylic composites
GÜRBÜZ R. (Danışman)
E.ATASAV(Öğrenci), Yüksek Lisans, 1998 -
Impact response of fiber reinforced composite pipes
GÜRBÜZ R. (Danışman)
-
Effect of aging on the crack growth behavior of 7475 aluminium alloy
GÜRBÜZ R. (Danışman)
S.ONUR(Öğrenci), Yüksek Lisans, 1997 -
Effect of aging on the fatigue crack growth behaviour of 7475 aluminium alloy
GÜRBÜZ R. (Danışman)
-
Effect of loading spectrum on the fatigue crack growth kinetics of an Al-Zn-Mg-Cu alloy
GÜRBÜZ R. (Danışman)
Ç.DÜNDAR(Öğrenci), Yüksek Lisans, 1995 -
The effect of stress ratio on fatigue crack growth kinetics of AISI 4340 steel
GÜRBÜZ R. (Danışman)
Ş.ÇADIRCI(Öğrenci), Yüksek Lisans, 1995 -
Effect of copper on the fatigue crack growth behaviour of ductile cast irons
GÜRBÜZ R. (Danışman)
-
Effect of copper on the fatique crack growth behavior of ductile cast irons
GÜRBÜZ R. (Danışman)
A.HAKAN(Öğrenci), Yüksek Lisans, 1994 -
Effect of aging on the fatique crack kinetics of Al-Zn-Mg-Cu alloy
GÜRBÜZ R. (Danışman)
P.S.(Öğrenci), Yüksek Lisans, 1993 -
Effect of aging on the fatigue crack growth kinetics of an AL-Zn-Mg-Cu alloy
GÜRBÜZ R. (Danışman)