Yayınlar & Eserler

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Stable, Ductile and Strong Ultrafine HT-9 Steels via Large Strain Machining

El-Atwani O., Kim H., Gigax J. G., Harvey C., Aytuna B., Efe M., et al.
NANOMATERIALS , cilt.11, sa.10, 2021 (SCI-Expanded) identifier identifier identifier

The role of intermetallic particles on mode I crack propagation mechanisms in metal plates

Tekog̃lu C., Çelik Ş., Duran H., EFE M., Baier-Stegmaier S., Nielsen K.
Engineering Fracture Mechanics , cilt.253, 2021 (SCI-Expanded) identifier identifier

Excessive damage increase in dual phase steels under high strain rates and temperatures

Cobanoglu M., Ertan R. K., ŞİMŞİR C., EFE M.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS , cilt.30, sa.2, ss.283-296, 2021 (SCI-Expanded) identifier identifier

Strong strain path dependence of strain localizations and fracture in magnesium AZ31 sheet

Alkan K., Aytuna O. B., GÜLER B., EFE M.
JOURNAL OF MAGNESIUM AND ALLOYS , cilt.8, sa.2, ss.472-479, 2020 (SCI-Expanded) identifier identifier

Micro- and mesoscale mechanical properties of an ultra-fine grained CrFeMnNi high entropy alloy produced by large strain machining

Gigax J. G., El-Atwani O., McCulloch Q., Aytuna B., EFE M., Fensin S., et al.
SCRIPTA MATERIALIA , cilt.178, ss.508-512, 2020 (SCI-Expanded) identifier identifier

Efficient fabrication of ultrafine-grained 316L stainless steel surfaces for orthopaedic applications

Tufan Y., Demir E. C., Efe M., Ercan B.
Materials Science and Technology (United Kingdom) , cilt.35, ss.1891-1897, 2019 (SCI-Expanded) identifier identifier

Does sink efficiency unequivocally characterize how grain boundaries impact radiation damage ?

El-Atwani O., Martinez E., Esquivel E., EFE M., Taylor C., Wang Y. Q., et al.
PHYSICAL REVIEW MATERIALS , cilt.2, sa.11, 2018 (SCI-Expanded) identifier identifier

Nanohardness measurements of heavy ion irradiated coarse- and nanocrystalline-grained tungsten at room and high temperature

El-Atwani O., Weaver J. S., Esquivel E., EFE M., Chancey M. R., Wang Y. Q., et al.
JOURNAL OF NUCLEAR MATERIALS , cilt.509, ss.276-284, 2018 (SCI-Expanded) identifier identifier

Twinning-induced shear banding and its control in rolling of magnesium

Atik K., EFE M.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.725, ss.267-273, 2018 (SCI-Expanded) identifier identifier

Loop and void damage during heavy ion irradiation on nanocrystalline and coarse grained tungsten: Microstructure, effect of dpa rate, temperature, and grain size

El-Atwani O., Esquivel E., EFE M., Aydogan E., Wang Y. Q., Martinez E., et al.
Acta Materialia , cilt.149, ss.206-219, 2018 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Detailed transmission electron microscopy study on the mechanism of dislocation loop rafting in tungsten

El-Atwani O., Aydogan E., Esquivel E., EFE M., Wang Y. Q., Maloy S. A.
Acta Materialia , cilt.147, ss.277-283, 2018 (SCI-Expanded) identifier identifier

Softening due to Grain Boundary Cavity Formation and its Competition with Hardening in Helium Implanted Nanocrystalline Tungsten

Cunningham W. S., Gentile J. M., El-Atwani O., Taylor C. N., EFE M., Maloy S. A., et al.
SCIENTIFIC REPORTS , cilt.8, 2018 (SCI-Expanded) identifier identifier identifier

Forming and fracture limits of sheet metals deforming without a local neck

GÜLER B., EFE M.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , cilt.252, ss.477-484, 2018 (SCI-Expanded) identifier identifier

Dynamic strain aging in DP steels at forming relevant strain rates and temperatures

BAYRAMIN B., Simsir C., EFE M.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.704, ss.164-172, 2017 (SCI-Expanded) identifier identifier

Large Strain and Small-Scale Biaxial Testing of Sheet Metals

Seymen Y., GÜLER B., EFE M.
EXPERIMENTAL MECHANICS , cilt.56, sa.9, ss.1519-1530, 2016 (SCI-Expanded) identifier identifier

Flow transitions and flow localization in large-strain deformation of magnesium alloy

Sagapuram D., EFE M., Trumble K. P., Chandrasekar S.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.659, ss.295-305, 2016 (SCI-Expanded) identifier identifier

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Investigation of Portevin-LeChatelier Bands in 5754 Aluminum Alloy under Various Strain Paths

Aytuna O. B., EFE M.
1st International Workshop on Plasticity, Damage and Fracture of Engineering Materials (IWPDF), Ankara, Türkiye, 22 - 23 Ağustos 2019, cilt.21, ss.120-129 identifier identifier

Production of Photocatalytically Active TiO2 – P2O5 Glasses by the Sol-gel Process

öztürk Y. C., Bouziani A., EFE M., PARK J., KALEM V., ÖZTÜRK A.
19. Uluslararası Metalurji ve Malzeme Kongresi, İstanbul, Türkiye, 25 - 27 Ekim 2018, cilt.1, ss.412-415

MULTI-SCALE CHARACTERIZATION OF DEFORMATION IN ALUMINUM

GÜLER B., EFE M.
13th ASME International Manufacturing Science and Engineering Conference, Texas, Amerika Birleşik Devletleri, 18 - 22 Haziran 2018 identifier

Grain-Scale Investigations of Deformation Heterogeneities in Aluminum Alloys

GÜLER B., Simsek U., YALÇINKAYA T., EFE M.
21st International ESAFORM Conference on Material Forming (ESAFORM), Palermo, İtalya, 23 - 25 Nisan 2018, cilt.1960 identifier identifier

Formability analysis of sheet metals by cruciform testing

GÜLER B., Alkan K., EFE M.
36th IDDRG Conference on Materials Modelling and Testing for Sheet Metal Forming, Munich, Almanya, 2 - 06 Temmuz 2017, cilt.896 identifier identifier

A Material Perspective on Consequence of Deformation Heating During Stamping of DP Steels

ŞİMŞİR C., Cetin B., EFE M., Davut K., Bayramin B.
36th IDDRG Conference on Materials Modelling and Testing for Sheet Metal Forming, Munich, Almanya, 2 - 06 Temmuz 2017, cilt.896 identifier identifier

Large Strain Cruciform Biaxial Testing for FLC Detection

GÜLER B., EFE M.
20th International ESAFORM Conference on Material Forming, Dublin, İrlanda, 26 - 28 Nisan 2017, cilt.1896 identifier identifier

Enabling shear textures and fine-grained structures in Magnesium sheet by machining-based deformation processing

Sagapuram D., EFE M., Trumble K. P., Chandrasekar S.
6th International Conference on Nanomaterials by Severe Plastic Deformation (NanoSPD), Metz, Fransa, 30 Haziran - 04 Temmuz 2014, cilt.63 identifier identifier

Metrikler

Yayın

25

Atıf (WoS)

261

H-İndeks (WoS)

9

Atıf (Scopus)

193

H-İndeks (Scopus)

7

Proje

11

Fikri Mülkiyet

1

Tez Danışmanlığı

9

Açık Erişim

7
BM Sürdürülebilir Kalkınma Amaçları