Academic Titles
-
2019 - Continues Professor
Middle East Technical University, Faculty of Engineering, Department of Aerospace Engineering
-
2017 - 2019 Associate Professor
Middle East Technical University, Faculty of Engineering, Department of Aerospace Engineering
-
2009 - 2017 Assistant Professor
Middle East Technical University, Faculty of Engineering, Department of Aerospace Engineering
-
2008 - 2009 Lecturer PhD
Middle East Technical University, Faculty of Engineering, Department of Aerospace Engineering
-
2005 - 2008 Research Assistant PhD
Middle East Technical University, Faculty of Engineering, Department of Aerospace Engineering
-
2006 - 2006 Expert PhD
Université d''Orléans, CNRS, Institut de Combustion Aérothermique Réactivité et Environnement, UPR3021
-
2006 - 2006 Expert PhD
Ecole Nationale Supérieure de Mecanique et d''Aérotechnique, LEA
-
2000 - 2005 Research Assistant
Middle East Technical University, Faculty of Engineering, Department of Aerospace Engineering
Managerial Experience
-
2017 - 2018 Deputy Head of Department
Middle East Technical University, Havacılık Ve Uzay Mühendisliği Bölümü
-
2012 - 2015 Coordinator of Faculty Training Program
Middle East Technical University, Faculty of Engineering, Department of Aerospace Engineering
-
2012 - 2015 Deputy Head of Department
Middle East Technical University, Faculty of Engineering, Department of Aerospace Engineering
-
2009 - 2015 Erasmus Program Institutional Coordinator
Middle East Technical University, Faculty of Engineering, Department of Aerospace Engineering
-
2009 - 2012 Deputy Head of Department
Middle East Technical University, Faculty of Engineering, Department of Aerospace Engineering
Non Academic Experience
-
2013 - Continues Kurucu Ortak
EKOFLY Spin Off Company
-
2019 - 2022 Danışman
ETC-Turkey - Environmental Tectonics Corporation
-
2018 - 2018 Başuzman Araştırmacı
TÜBİTAK Uzay
-
2013 - 2018 Başuzman araştırmacı
TÜBİTAK UZAY
-
2011 - 2011 The Jean J. Ginoux Lecturer
Von Karman Institute
-
2011 - 2011 Erasmus Teaching Staff Mobility program
TU Delft
-
2006 - 2006 Window of Science Visit
AFRL
-
2006 - 2006 Post doktora
ENSMA Université de Poitiers
-
2006 - 2006 Post doktora
CNRS Orléans
Courses
-
Undergraduate AEROSPACE ENGINEERING DESIGN I
-
Postgraduate Introduction to Space Science
-
Undergraduate ASE451
-
Undergraduate AEROSPACE ENGINEERING DESIGN II
-
Undergraduate Introduction to Atmospheric Physics
-
Undergraduate AERODYNAMICS II
-
Undergraduate AERODYNAMICS I
-
Undergraduate FLUID MECHANICS
-
Undergraduate AEROSPACE ENGINEERING LABORATORY
-
Postgraduate EXPERIMENTAL AERODYNAMICS
-
Undergraduate DYNAMICS
Advising Theses
-
Implementation of an actuator disc model using blade element theory for propellers into SU2 software
Kurtuluş D. F. (Advisor)
K.YENİPAZAR(Student), Postgraduate, 2023 -
UNSTEADY AERODYNAMIC CHARACTERISTICS OF SYMMETRIC AIRFOIL AT LOW REYNOLDS NUMBERS
Kurtuluş D. F. (Advisor)
M.GÜNEY(Student), Postgraduate, 2023 -
2D AND 3D UNSTEADY AERODYNAMIC ANALYSIS OF A VERY LIGHTAIRCRAFT'S WING
Kurtuluş D. F. (Advisor)
B.ANILIR(Student), Postgraduate, 2023 -
VIBRATION CONTROL OF THIN STRUCTURES USING A REINFORCEMENT LEARNING CONTROL
Kurtuluş D. F., Ferhat I.(Co-Advisor)
S.WANYONYI(Student), Postgraduate, 2023 -
SENSITIVITY ANALYSIS OF AERIAL WILDFIRE FIGHTING TACTICS WITH HETEROGENEOUS FLEETS USING AN AGENT BASED SIMULATION FRAMEWORK
Kurtuluş D. F., Björn N.(Co-Advisor)
N.ÇIĞAL(Student), Postgraduate, 2023 -
Unsteady aerodynamics of plunging and stationary symmetric airfoils at low Reynolds numbers
Kurtuluş D. F. (Advisor)
K.PEERZADA(Student), Postgraduate, 2023 -
MODEL BASED PRELIMINARY DESIGN AND OPTIMIZATION OF AIRCRAFTS
Kurtuluş D. F. (Advisor)
M.ÖZDEMİR(Student), Postgraduate, 2022 -
Modeling of the hawkmoth wing and its implementation in a four-bar flapping wing mechanism
Kurtuluş D. F., Arikan K. B.(Co-Advisor)
A.ALTUGA(Student), Postgraduate, 2022 -
Unsteady aerodynamics of cambered airfoils at low Reynolds number
Kurtuluş D. F. (Advisor)
T.AHMED(Student), Postgraduate, 2022 -
MODELLING AND CONTROL OF 3D FLAPPING FLIGHT
Kurtuluş D. F., Arikan K. B.(Co-Advisor)
Ö.ÇALIŞ(Student), Postgraduate, 2022 -
Biyo-esinlenmiş çırpan kanat modellerinin aeroelastik analizleri
Güler M. A., Kurtuluş D. F. (Co-Advisor)
-
Design and analysis of a VTOL tilt-wing UAV
Kurtuluş D. F. (Advisor)
-
DESIGNING AUTOPILOT AND GUIDANCE ALGORITHMS TO CONTROL TRANSLATIONAL AND ROTATIONAL DYNAMICS OF A FIXED WING VTOL UAV
-
A stochastic disassembly line balancing problem with hazardous tasks
KURTULUŞ D. F. (Advisor)
-
Aerodynamic and inertial characterization of a generic flapping wing mechanism
Turgut A. E., Kurtuluş D. F. (Co-Advisor)
C.BEKER(Student), Postgraduate, 2020 -
Investigation of the flexible missile fins under aerothermal loading
Kurtuluş D. F. (Advisor)
E.ÖZKÖKDEMİR(Student), Postgraduate, 2018 -
Investigation of the flexible missile fins under aerothermal loadings
KURTULUŞ D. F. (Advisor)
-
Static aeroelastic modeling and parametric study of stacking sequence for laminated composite missile fins
Kurtuluş D. F. (Advisor)
-
Pressure field estimation from particle image velocimetry data
Kurtuluş D. F. (Advisor)
-
Aerodynamic Investigation of a Model Scale Helicopter Rotor in Ground Effect
Kurtuluş D. F., Sezer Uzol N. (Co-Advisor)
-
Parametric investigation of hull shaped fuselage for amphibious UAV
KURTULUŞ D. F. (Advisor)
-
Experimental and Numerical Investigation of An S-Duct diffuser that is designed for a Micro Turbojet Engine Powered Aircraft
Kurtuluş D. F. (Advisor)
S.Aslan(Student), Postgraduate, 2017 -
Numerical Analysis of 3D model flapping Flat Plate
Kurtuluş D. F. (Advisor)
-
Winglet Design and Analysis for Low Altitute Solar Powered UAV
Kurtuluş D. F. (Advisor)
A.İhsan(Student), Postgraduate, 2016 -
Development of Unsteady Models for Flapping Wings’ Controller Design Approach
Kurtuluş D. F., Arıkan K. B.(Co-Advisor)
F.Ormancı(Student), Postgraduate, 2016 -
Design and Testing of a Four-Bar Flapping Wing Mechanism
Kurtuluş D. F. (Advisor)
-
Winglet design and analysis for low altitude solar powered UAV
KURTULUŞ D. F. (Advisor)
-
Development of unsteady models for flapping wings' controller design approach
KURTULUŞ D. F. (Co-Advisor), Kurtuluş D.(Co-Advisor)
-
Experimental and numerical inestigation of an s-duct diffuser designed for a micro turbojet engine powered aircraft
KURTULUŞ D. F. (Advisor)
-
Cooling Performance Investigation of a Two-pass Rib-Roughened Channel
-
Investigation of a Generic Warhead Containing Plastic Bonded Explosive Under Liquid Fuel Fire by Numerical and Test Methods
-
Experimental Analysis of 3-D Sweeping Wings
Kurtuluş D. F. (Advisor)
-
Modelling and Controller Design of a VTOL Air Vehicle
Kurtuluş D. F. (Co-Advisor), Tekinalp O.
A.Sami(Student), Postgraduate, 2015 -
Numerical Burnback Analysis of Three Dimensional solid Propellant Grains
Kurtuluş D. F. (Advisor)
-
Synthetic Jet Application on a Flapping Airfoil
Kurtuluş D. F. (Advisor)
-
Development and Testing of a 3 DOF Tandem Flapping Wing Mechanism
Kurtuluş D. F. (Advisor)
-
Numerical and Experimental Analysis of a Piezoelectric Flat Plate in Flapping Motion
Kurtuluş D. F. (Advisor)
-
Wind Resource Assessment and Wind Farm Modeling in Complex Terrain: Bodrum Peninsula Case Study using Computational Fluid Dynamics
Kurtuluş D. F. (Advisor)
-
Application of Ultrasonic Burning Rate Measurement Method on Closed Bombs
-
, Numerical and Experimental Investigation of Pitching/Plunging Airfoils in Hover
Kurtuluş D. F. (Advisor)
H.Hızlı(Student), Postgraduate, 2012 -
The effect of Geometric Design Parameters on the Flow Behavior of a Dual Pulse Solid Rocket Motor During Secondary Firing
Kurtuluş D. F., Ulaş A. (Co-Advisor)
S.Erdem(Student), Postgraduate, 2012 -
Numerical Investigation of Characteristics of Pitch and Roll Damping Coefficients for Missile Models
Kurtuluş D. F. (Advisor)
-
Experimental Investigation of Boundary Layer Separation Control using Steady Vortex Generator Jets on Low Pressure Turbines
Kurtuluş D. F. (Co-Advisor), Uzol O.
-
Numerical and experimental investigation of pitching / plunging airfoils in hover
KURTULUŞ D. F. (Advisor)
-
The Effects of geometric design parameters on the flow behavior of a dual pulse solid rocket motor during secondary firing
KURTULUŞ D. F. (Co-Advisor), ULAŞ A. (Co-Advisor)
-
Dynamical Modeling of the Flow over Flapping Wing by Applying Proper Orthogonal Decomposition and System Identification
Kurtuluş D. F. (Advisor), Kasnakoğlu C.(Co-Advisor)
-
Low Reynolds Number Aerodynamics of Flapping Airfoils in Hover and Forward Flight
Kurtuluş D. F. (Advisor)
-
Design and Development of a Mechanically Adjustable Linear Torsion Spring using Cams
Kurtuluş D. F. (Co-Advisor), Yazıcıoğlu Y.