Prof. CÜNEYT SERT

2016 - Continues Associate Professor

2004 - 2016 Assistant Professor

2003 - 2004 Lecturer

1996 - 1998 Research Assistant

COMPUTATIONAL FLUID DYNAMICS FOR INCOMPRESSIBLE FLOWS

NUMERICAL METHODS IN ME II

FLUID MECHANICS II

INTRODUCTION TI FINITE ELEMENT ANALYSIS

Numerical modeling of charring ablative thermal protection systems under aerodynamic heating

Simulation of aneurysm hemodynamics to predict intraluminal thrombus formation region

Unsteady flow analysis of two different arm stroke techniques in front crawl swimming using computational fluid dynamics

Simulation of laminar microchannel flows with realistic 3D surface roughness

SERT C. (Advisor)

B.Akbaş(Student), Postgraduate, 2019

Investigation of flowfield characteristics due to shock wave-boundary layer interaction on compression decompression corners using les

SERT C. (Advisor)

I.Taylan(Student), Postgraduate, 2019

Optimizing heat exchanger parameters of a Joule-Thomson cryogenic cooler to improve the cooling performance

Optimizing heat exchanger parameters of a joulethomson cryogenic cooler to improve the cooling performance

OKUTUCU ÖZYURT H. T. (Co-Advisor), SERT C. (Co-Advisor)

M.Baki(Student), Doctorate, 2018

Large eddy simulation of pressure fluctuations insidestenosed blood vessels towards noninvasive diagnosis ofatherosclerosis

Sert C., Yazıcıoğlu Y. (Co-Advisor)

K.ÖZDEN(Student), Doctorate, 2018

Numerical and experimental investigation on laser damage threshold of highly reflective multilayer thin films

SERT C. (Co-Advisor), OKUTUCU ÖZYURT H. T.(Co-Advisor)

M.OCAK(Student), Doctorate, 2016

GPU accelerated high-order discontinuous galerkin level set methods for incompressible multiphase flows

SERT C. (Co-Advisor), AKSEL M. H. (Co-Advisor)

A.KARAKUŞ(Student), Doctorate, 2015

Design of a grid fin aerodynamic control device for transonic flight regime

SERT C. (Co-Advisor), BARAN Ö. U. (Co-Advisor)

E.DİKBAŞ(Student), Postgraduate, 2015

Parallel implementation of the finite element method on graphics processors for the solution of incompressible flows

SERT C. (Advisor)

M.MURAT(Student), Postgraduate, 2014

Performance prediction of darrieus type vertical axis wind turbines using numerical simulations

SERT C. (Advisor)

F.SELÇUK(Student), Postgraduate, 2014

Investigation of fluid structure interaction in cardiovascular system from diagnostic and pathological perspective

Sert C. (Co-Advisor), Yazıcıoğlu Y.

H.ENES(Student), Postgraduate, 2012

Static aeroelastic analysis of a generic slender missile using a loosely coupled fluid structure interaction method

SERT C. (Advisor)

M.AKGÜL(Student), Postgraduate, 2012

Experimental investigation of uninterrupted and interrupted microchannel heat sinks

GÜVENÇ YAZICIOĞLU A. (Co-Advisor), SERT C. (Co-Advisor)

A.GÖZDE(Student), Postgraduate, 2012

Incompressible flow simulations using least squares spectral element method on adaptively refined triangular grids

SERT C. (Advisor)

O.AKDAĞ(Student), Postgraduate, 2012

Simulation of conjugate heat transfer problems using least squares finite element method

SERT C. (Advisor)

M.UĞUR(Student), Postgraduate, 2012

Least-squares finite element solution of euler equations with adaptive mesh refinement

SERT C. (Advisor)

H.YİĞİT(Student), Postgraduate, 2012

Analysis of single phase fluid flow and heat transfer in slip flow regime by parallel implementation of Lattice Boltzmann method on gpus

SERT C. (Advisor)

S.BERAT(Student), Postgraduate, 2012

Utilization of neural networks for simulation of vehicle induced flow in tunnel systems

SERT C. (Advisor)

G.KOÇ(Student), Doctorate, 2012

Experimental comparison of fluid and thermal characteristics of microchannel and metal foam heat sinks

AKSEL M. H. (Co-Advisor), SERT C. (Co-Advisor)

A.MUAZ(Student), Postgraduate, 2011

Conduction based compact thermal modeling for thermal analysis of electronic components

SERT C. (Advisor)

M.OCAK(Student), Postgraduate, 2010

Development of an incompressible, laminar flow solver based on least squares spectral element method with P-type adaptive refinement capabilities

SERT C. (Advisor)

A.ÖZÇELİKKALE(Student), Postgraduate, 2010

Modeling and simulation of shaped charges

SERT C. (Advisor)

E.GÜREL(Student), Postgraduate, 2009

Development of a multigrid accelerated Euler solver on adaptively refined two- and three-dimensional cartesian grids

AKSEL M. H. (Co-Advisor), SERT C. (Co-Advisor)

M.ÇAKMAK(Student), Postgraduate, 2009

Experimental investigation and numerical analysis of microchannel heatsinks for phased array radar cooling application

SERT C. (Advisor)

E.Alpsan(Student), Postgraduate, 2008

Experimental investigation and numerical analysis of microchannel heatsinks for phased array radar cooling applications

A two dimensional euler flow solver on adaptive cartesian grids

SERT C. (Advisor)

B.SİYAHHAN(Student), Postgraduate, 2008

CFD analysis of a notebook computer thermal management solution

TARI İ. (Co-Advisor), SERT C. (Co-Advisor)

F.SEZA(Student), Postgraduate, 2008

Development of a pressure-based solver for both incompressible and compressible flows

SERT C. (Advisor)

K.DENK(Student), Postgraduate, 2007

Development of an educational CFD software for two dimensional incompressible flows

SERT C. (Advisor)

G.NAKİBOĞLU(Student), Postgraduate, 2007

Design and fabrication of a DNA electrophoresis chip based on MEMS technology

KÜLAH H. (Co-Advisor), SERT C. (Co-Advisor)

S.SUKAS(Student), Postgraduate, 2007

Spectral (h-p) element methods approach to the solution of poisson and helmholtz equations using matlab

TARI İ. (Co-Advisor), SERT C. (Co-Advisor)

T.MARAL(Student), Postgraduate, 2006