Eğitim Bilgileri
1996 - 2000
1996 - 2000Doktora
Pennsylvania State University, Makina Mühendisligi, Amerika Birleşik Devletleri
1994 - 1996
1994 - 1996Yüksek Lisans
Pennsylvania State University, Makina Mühendisligi, Amerika Birleşik Devletleri
1990 - 1994
1990 - 1994Lisans
Orta Doğu Teknik Üniversitesi, Mühendislik Fakültesi, Makine Mühendisliği Bölümü, Türkiye
Akademik Ünvanlar / Görevler
2012 - Devam Ediyor
2012 - Devam EdiyorProf. Dr.
Orta Doğu Teknik Üniversitesi, Mühendislik Fakültesi, Makine Mühendisliği Bölümü
2007 - 2012
2007 - 2012Doç. Dr.
Orta Doğu Teknik Üniversitesi, Mühendislik Fakültesi, Makine Mühendisliği Bölümü
2002 - 2007
2002 - 2007Yrd. Doç. Dr.
Orta Doğu Teknik Üniversitesi, Mühendislik Fakültesi, Makine Mühendisliği Bölümü
2001 - 2002
2001 - 2002Öğretim Görevlisi Dr.
Orta Doğu Teknik Üniversitesi, Mühendislik Fakültesi, Makine Mühendisliği Bölümü
Akademi Dışı Deneyim
2009 - Devam Ediyor
2009 - Devam EdiyorAssociate Professor (Promotion)
METU, Associate Professor (Promotion)
2007 - 2009
2007 - 2009Associate Professor (Title)
METU, Associate Professor (Title)
2002 - 2007
2002 - 2007Assistant Professor
METU, Assistant Professor
2003 - 2004
2003 - 2004Consultant
TÜBİTAK-SAGE, Consultant
2001 - 2002
2001 - 2002Instructor/Reader
METU, Instructor/Reader
2000 - 2001
2000 - 2001Consultant
Combustion Propulsion and Ballistic Technology Corp., Consultant
2000 - 2001
2000 - 2001Research Associate
The Pennsylvania State University, Research Associate
1994 - 2000
1994 - 2000Assistant
The Pennsylvania State University, Assistant
Yönetilen Tezler
2021
2021Yüksek Lisans
ANALYSIS OF SLOSH DAMPING IN LIQUID ROCKET ENGINE PROPELLANT TANK
ULAŞ A. (Danışman)
D.BERRAK(Öğrenci)
2019
2019Yüksek Lisans
İrtifa benzetimi için test düzeneği tasarımı.
ULAŞ A. (Danışman)
A.Aydoğdu(Öğrenci)
2019
2019Yüksek Lisans
AP/HTPB/Demir oksit bazlı yakıtların matematiksel model ve deney sonuçlarıyla yanma hızı karşılaştırması.
ULAŞ A. (Danışman)
S.Cem.(Öğrenci)
2019
2019Yüksek Lisans
Basınçlı girdap tipi püskürtecin geometrik parametrelerinin sprey üzerindeki etkisinin araştırılması.
ULAŞ A. (Danışman)
T.Tokgöz(Öğrenci)
2019
2019Yüksek Lisans
Pürmüz tipi bir sıvı yakıtlı roket motoru ateşleyicisinin deneysel ve sayısal yöntemlerle incelenmesi ile bir performans parametresi olarak etkin alev boyunun elde edilmesi.
ULAŞ A. (Danışman)
L.Çağatay(Öğrenci)
2018
2018Yüksek Lisans
Optimization of air to air cross flow heat exchanger
ULAŞ A. (Danışman)
İ.ÇAĞATAY(Öğrenci)
2017
2017Yüksek Lisans
Design and Ground Testing of a Liquid Bi-Propellant Thruster
ULAŞ A. (Danışman)
Ç.YILMAZ(Öğrenci)
2016
2016Yüksek Lisans
Experimental and numerical study of detonation in a closed chamber
ULAŞ A. (Danışman)
T.İNCEKÜRK(Öğrenci)
2015
2015Doktora
AN EXPERIMENTAL STUDY ON THE IGNITION AND COMBUSTION OF PYROTECHNIC COMPOSITIONS
ULAŞ A. (Danışman)
S.KOÇ(Öğrenci)
2014
2014Yüksek Lisans
Design and development of a cylinder expansion test setup for determination of equation of state parameters of various explosives
ULAŞ A. (Danışman)
E.TOPKARAOĞLU(Öğrenci)
2013
2013Yüksek Lisans
Design and analysis of a high voltage exploding foil initiator for missile systems
ULAŞ A. (Danışman)
M.YUSUF(Öğrenci)
2012
2012Yüksek Lisans
The effect of Geometric Design Parameters on the Flow Behavior of a Dual Pulse Solid Rocket Motor During Secondary Firing
Kurtuluş D. F., Ulaş A. (Eş Danışman)
S.Erdem(Öğrenci)
2012
2012Yüksek Lisans
Drop test simulation of a munition with foams and parametric study on foam geometry and material
ULAŞ A. (Danışman)
B.GERÇEKER(Öğrenci)
2012
2012Yüksek Lisans
Analysis of internal explosion and structural response to blast loading
ULAŞ A. (Danışman)
U.CAN(Öğrenci)
2012
2012Yüksek Lisans
Çift darbeli roket motorlarında farklı geometrik tasarım parametrelerinin ikincil ateşleme anındaki akışa olan etkileri.
KURTULUŞ D. F. (Eş Danışman), ULAŞ A. (Eş Danışman)
S.Erdem(Öğrenci)
2010
2010Yüksek Lisans
Design and validation of a combustion test rig for airbreathing rocket propulsion studies
ULAŞ A. (Danışman)
E.SONGÜR(Öğrenci)
2010
2010Doktora
One and two dimensional numerical simulation of deflagration to detonation transition phenomenon in solid energetic materials
ÖZYÖRÜK Y. (Eş Danışman), ULAŞ A. (Eş Danışman)
B.NARİN(Öğrenci)
2009
2009Yüksek Lisans
An accelerated aerodynamic optimization approach for a small turbojet engine centrifugal compressor
ULAŞ A. (Danışman)
A.CEYLANOĞLU(Öğrenci)
2009
2009Yüksek Lisans
Design analysis and performance testing of a jet vane
ULAŞ A. (Danışman)
İ.KAYA(Öğrenci)
2009
2009Yüksek Lisans
BALLISTIC PERFORMANCE ANALYSIS OF MODERN BASE BLEED ARTILLERY PROJECTILES
ULAŞ A. (Danışman)
A.ÖKSÜZ(Öğrenci)
2008
2008Yüksek Lisans
Analysis of regenerative cooling in liquid propellant rocket engines
ULAŞ A. (Danışman)
M.EMRE(Öğrenci)
2008
2008Yüksek Lisans
STUDY OF IGNITION CHARACTERISTICS OF A PLASTIC BONDED EXPLOSIVE
ULAŞ A. (Danışman)
E.AYDEMİR(Öğrenci)
2007
2007Yüksek Lisans
Steady-state modeling of detonation phenomenon in premixed gaseous mixtures and energetic solid explosives
ULAŞ A. (Danışman)
F.CENGİZ(Öğrenci)
2005
2005Yüksek Lisans
Ramjet uygulamaları için boru bağlantılı test düzeneği tasarımı
ULAŞ A. (Danışman)
M.Nevzat(Öğrenci)
2005
2005Yüksek Lisans
Design of a connected pipe test facility for ramjet applications
ULAŞ A. (Danışman)
M.NEVZAT(Öğrenci)
2005
2005Yüksek Lisans
Experimental study of solid propellant combustion instability
ULAŞ A. (Danışman)
A.ÇEKİÇ(Öğrenci)
2004
2004Yüksek Lisans
Analysis of 3-D grain burnback of solid propellant rocket motors and verification with rocket motor tests
ULAŞ A. (Danışman)
G.PÜSKÜLCÜ(Öğrenci)
Makaleler
Tümü (12)
SCI-E, SSCI, AHCI (12)
SCI-E, SSCI, AHCI, ESCI (12)
Scopus (12)
2017
20171. Improved combustion model of boron particles for ducted rocket combustion chambers
Kalpakli B., Acar E. B., ULAŞ A.
COMBUSTION AND FLAME
, cilt.179, ss.267-279, 2017 (SCI-Expanded, Scopus)
2015
20152. Characterization of BPN Pyrotechnic Composition Containing Micro- and Nanometer-Sized Boron Particles
Koc S., ULAŞ A., Yilmaz N. E.
PROPELLANTS EXPLOSIVES PYROTECHNICS
, cilt.40, sa.5, ss.735-742, 2015 (SCI-Expanded, Scopus)
2014
20143. Two dimensional numerical prediction of deflagration-to-detonation transition in porous energetic materials
Narin B., ÖZYÖRÜK Y., ULAŞ A.
JOURNAL OF HAZARDOUS MATERIALS
, cilt.273, ss.44-52, 2014 (SCI-Expanded, Scopus)
2013
20134. Numerical analysis of regenerative cooling in liquid propellant rocket engines
ULAŞ A., Boysan E.
AEROSPACE SCIENCE AND TECHNOLOGY
, cilt.24, sa.1, ss.187-197, 2013 (SCI-Expanded, Scopus)
2011
20115. Calculation of Detonation Properties of Gaseous Explosives Using Generalized Reduced Gradient Nonlinear Optimization
ULAŞ A., Cengiz F.
PROPELLANTS EXPLOSIVES PYROTECHNICS
, cilt.36, sa.4, ss.314-319, 2011 (SCI-Expanded, Scopus)
2011
20116. A numerical study on the thermal initiation of a confined explosive in 2-D geometry
Aydemir E., ULAŞ A.
JOURNAL OF HAZARDOUS MATERIALS
, cilt.186, sa.1, ss.396-400, 2011 (SCI-Expanded, Scopus)
2011
20117. An experimental study on the hypergolic ignition of hydrogen peroxide and ethanolamine
Ak M. A., ULAŞ A., Sumer B., Yazici B., Yildirim C., Gonc L. O., et al.
FUEL
, cilt.90, sa.1, ss.395-398, 2011 (SCI-Expanded, Scopus)
2009
20098. Numerical prediction of steady-state detonation properties of condensed-phase explosives
Cengiz F., ULAŞ A.
JOURNAL OF HAZARDOUS MATERIALS
, cilt.172, ss.1646-1651, 2009 (SCI-Expanded, Scopus)
2008
20089. 3-D grain burnback analysis of solid propellant rocket motors: Part 1-ballistic motor tests
Puskulcu G., ULAŞ A.
AEROSPACE SCIENCE AND TECHNOLOGY
, cilt.12, sa.8, ss.579-584, 2008 (SCI-Expanded, Scopus)
2008
200810. 3-D grain burnback analysis of solid propellant rocket motors: Part 2-modeling and simulations
Puskulcu G., ULAŞ A.
AEROSPACE SCIENCE AND TECHNOLOGY
, cilt.12, sa.8, ss.585-591, 2008 (SCI-Expanded, Scopus)
2008
200811. Laser-induced ignition of solid propellants for gas generators
ULAŞ A., Kuo K. K.
FUEL
, cilt.87, sa.6, ss.639-646, 2008 (SCI-Expanded, Scopus)
2006
200612. An investigation of the performance of a boron/potassium-nitrate based pyrotechnic igniter
Ulas A., Risha G. A., Kuo K. K.
PROPELLANTS EXPLOSIVES PYROTECHNICS
, cilt.31, sa.4, ss.311-317, 2006 (SCI-Expanded, Scopus)
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler
2019
20191. Design Methodology for a Central Injection Type Supersonic Air Ejector and Diffuser System for Altitude Simulation
aydoğdu a., sümer b., yazıcı b., ULAŞ A.
AIAA Propulsion and Energy 2019 Forum, Indianapolis, Amerika Birleşik Devletleri, 19 - 22 Ağustos 2019, (Tam Metin Bildiri)
2019
20192. Investigation of the Effect of Geometrical Parameters of Pressure Swirl Atomizer on the Hollow Cone Spray
tokgöz t., sümer b., ULAŞ A.
AIAA Propulsion and Energy 2019 Forum, Indianapolis, Amerika Birleşik Devletleri, 19 - 22 Ağustos 2019, (Tam Metin Bildiri)
2019
20193. Evaluation of an Augmented Spark Igniter’s Flame Length and Comparison of Numerical and Experimental Investigations
Öz L., Özer A. C., Sümer B., ULAŞ A.
AIAA Propulsion and Energy 2019 Forum, Indianapolis, Amerika Birleşik Devletleri, 19 - 22 Ağustos 2019, (Tam Metin Bildiri)
2018
20184. Burning Rate Comparison of a Mathematical Model with Experimental Results for AP/HTPB Based Composite Propellants
Özcan S., cürdaneli s., ULAŞ A.
2018 AIAA Propulsion and Energy Forum, cincinnati, Amerika Birleşik Devletleri, 9 - 11 Temmuz 2018, (Tam Metin Bildiri)
2017
20175. Ballistic Performance of BPN Igniter Compositions Containing Micron and Nano-Sized Boron Particles
Koç S., Eroğul Kombe F., ULAŞ A.
53rd AIAA/SAE/ASEE Joint Propulsion Conference, Atlanta, GA, Amerika Birleşik Devletleri, 10 - 12 Temmuz 2017, (Tam Metin Bildiri)
2017
20176. Design and Testing of a Green Bipropellant Thruster for Satellite Propulsion
Yılmaz Ç., Bayramoğlu M., Göçmen M., ULAŞ A.
53rd AIAA/SAE/ASEE Joint Propulsion Conference, Atlanta, GA, Amerika Birleşik Devletleri, 10 - 12 Temmuz 2017, (Tam Metin Bildiri)
2016
20167. A Test Bench for Gas Turbine Combustor Cooling Investigations
inanlı s., YASA T., ULAŞ A.
12th international conference on heat transfer fluid mechanics and thermodynamics, 11 - 13 Temmuz 2016, (Tam Metin Bildiri)
2016
20168. Experimental Investigation of Effusion and Film Cooling for Gas Turbine Combustor
inanlı s., YASA T., ULAŞ A.
12th international conference on heat traansfer fluid mechanics and thermodynamics, 11 - 13 Temmuz 2016, (Tam Metin Bildiri)
2015
20159. Comparison of BPN Igniter Compositions Containing Micron and Nano Sized Boron Particles
Koç S., ULAŞ A.
51st AIAA/SAE/ASEE Joint Propulsion Conference, 27 - 29 Temmuz 2015, (Tam Metin Bildiri)
2007
200710. Application of parallel processing to numerical modeling of two-phase deflagration-to-detonation (DDT) phenomenon
Bekir B., ÖZYÖRÜK Y., ULAŞ A.
Parallel Computational Fluid Dynamics, Parallel CFD 2007, Antalya, Türkiye, 21 - 24 Mayıs 2007, ss.123-130, (Tam Metin Bildiri)
2007
200711. 1 D two phase modeling of deflagration to detonation transition DDT phenomenon in porous energetic materials
NARİN B., ÖZYÖRÜK Y., ULAŞ A.
AIAC'2007 Ankara International Aerospace Conference, Ankara, Turkey, 10 - 12 Eylül 2007, (Tam Metin Bildiri)
2007
200712. Comparison of different aspect ratio cooling channel designs for a liquid propellant rocket engine
Boysan M. E., ULAŞ A., Toker K. A., Seckin B.
3rd International Conference on Recent Advances in Space Technologies, İstanbul, Türkiye, 14 - 16 Haziran 2007, ss.225-226, (Tam Metin Bildiri)
2007
200713. Experimental analysis on the measurement of ballistic properties of solid propellants
Cuerdaneli S., Ak M. A., ULAŞ A.
3rd International Conference on Recent Advances in Space Technologies, İstanbul, Türkiye, 14 - 16 Haziran 2007, ss.231-232, (Tam Metin Bildiri)
2005
200514. Development of one dimensional solver for two phase reactive deflagration to detonation transition phenomenon in porous energetic materials
NARİN B., ÖZYÖRÜK Y., ULAŞ A.
AIAC'2005 Ankara International Aerospace Conference, Ankara, Turkey, 22 - 25 Ağustos 2005, (Tam Metin Bildiri)
2000
200015. EFFECTS OF FLUORINE-CONTAINING SPECIES ON THE IGNITION AND COMBUSTION OF BORON PARTICLES: EXPERIMENT AND THEORY
ULAŞ A., Kuo K. K., Gotzmer C.
The Fifth International Symposium on Special Topics in Chemical Propulsion, stresa, İtalya, 18 - 22 Haziran 2000, ss.453-463, (Tam Metin Bildiri)