Prof. ALP CANER

Academic Positions 2

2017 - Continues Professor

Middle East Technical University, Faculty of Engineering, Department of Civil Engineering
2005 - 2017 Associate Professor

Middle East Technical University, Faculty of Engineering, Department of Civil Engineering

Managerial Experience 1

2014 - Continues Member of Unit Promotion and Alumni Relations Commission

Middle East Technical University, Faculty of Engineering, Department of Civil Engineering

Non Academic Experience 5

2020 - Continues Başkan

IABSE Foundation, Başkan
2019 - Continues President

Non-profit Organisation, International Association of Bridge and Structural Engineering Foundation, President
2011 - Continues Başkan

Türkiye Köprü ve İnşaat Cemiyeti, Başkan
2004 - Continues Assistant Professor

METU, Assistant Professor
1996 - 2004 Senior Structural Engineer, PE

Parsons Brinckerhoff - New York, Senior Structural Engineer, PE

Supervised Theses 42

The effect of horizontal irregularities and base isolation configuration on seismic response of rc buildings

CANER A. (Advisor)

E.BİLGE(Student), Postgraduate, 2022
Investigation of initial construction stages of incrementally launched post-tensioned concrete box bridges

CANER A. (Advisor)

Z.ALTINSOY(Student), Postgraduate, 2021
SENSITIVITY ANALYSIS OF BRIDGE DECKS FOR HIGH-SPEED RAILWAY BRIDGES

Caner A. (Advisor)

A.RAHMAN(Student), Postgraduate, 2020
An investigation of liquefaction effects on piers and piles of segmental precast balanced cantilever bridges

Caner A.

Ö.GÜNDÜZ(Student), Postgraduate, 2019
RELIABILITY AND QUANTITY BASED EVALUATION OF STRUCTURAL PROPORTIONS OF SEVERAL HIGHWAY PRECAST PRESTRESSED I GIRDER BRIDGES DESIGNED IN AN EARTHQUAKE REGION

Caner A. (Advisor)

İ.TOKER(Student), Postgraduate, 2019
Investigation and comparison of bearing devices used in high-speed railway bridges under earthquake impact

Caner A., AKKAYA A. (Co-Advisor)

U.AŞCI(Student), Postgraduate, 2019
Evaluation of intensity measures for ground motion selection to be used in the analysis of highway flyover bridges

Caner A., AKKAYA A. (Co-Advisor)

A.AKRAY(Student), Postgraduate, 2019
Reliability analysis of precast prestressed bridge girders based on AASHTO LRFD and EUROCODE

CANER A. (Advisor)

C.ÇELİK(Student), Postgraduate, 2018
Reliability analysis of precast prestressed concrete bridge girders based on AASHTO LRFD and EUROCODE specifications

CANER A. (Advisor)

C.Çelik(Student), Postgraduate, 2018
Development of a new hybrid damper for steel bracing systems

CANER A. (Advisor)

N.SABAHATIN(Student), Doctorate, 2017
Multi-support seismic excitation of long span highway bridges

ASKAN GÜNDOĞAN A. (Co-Advisor), CANER A. (Co-Advisor)

T.GÖKDEMİR(Student), Postgraduate, 2017
The assessment of seismic performance of multi-span highway bridges in turkey including column deterioration

CANER A. (Advisor)

C.ELİF(Student), Postgraduate, 2016
A study on seismic behavior of scour-vulnerable bridges

YANMAZ A. M. (Co-Advisor), CANER A. (Co-Advisor)

H.SEMA(Student), Postgraduate, 2016
Segmental concrete box girder bridge thermal analysis based on new Turkish solar zone map developed to assess temperature gradient loading

CANER A. (Advisor)

A.İPEK(Student), Postgraduate, 2015
Seismic performance of unbonded elastomeric bearings on bridges: an experimental and parametric study

CANER A. (Advisor)

K.ARMAN(Student), Doctorate, 2015
Live load reliability index evaluation for post tensioned balanced cantilever bridges

CANER A. (Advisor)

B.BORA(Student), Postgraduate, 2015
Turkish LRFD Live Load Design Parameters for Cable Stayed Bridge with Concrete Deck on Steel Girder

CANER A. (Advisor)

Y.DÖNMEZ(Student), Postgraduate, 2015
Reliability based evaluation of seismic design of Turkish bridges by using load and resistance factor method

CANER A. (Advisor)

S.Alp(Student), Postgraduate, 2014
Experimental investigation of uplift on seismic base isolators /

CANER A. (Advisor)

E.ERKAKAN(Student), Postgraduate, 2014
Reliability based evaluation of seismic design of Turkish bridges by using load and load and resistance factor method

CANER A. (Advisor)

S.ALP(Student), Postgraduate, 2014
Calibration of Turkish LRFD bridge design method for slab on steel plate girders

CANER A. (Advisor)

A.FATİH(Student), Postgraduate, 2013
Fire tests of cut and cover tunnel roof segments at positive moment region

CANER A. (Advisor)

K.SARP(Student), Postgraduate, 2011
Effect of initial support of excavation on seismic performance of cut and cover structures

CANER A. (Advisor)

H.REZAEİ(Student), Postgraduate, 2011
Reliability based safety level evaluation of Turkish type precast prestressed concrete bridge girders designed in accordance with the load and resistance factor desing method

CANER A. (Advisor)

O.ARGINHAN(Student), Postgraduate, 2010
Reliability based safety level evaluation of Turkish type precast prestressed concrete bridge girders designed in accordance with the load and resistance factor design method

CANER A. (Co-Advisor), YÜCEMEN M. S. (Co-Advisor)

O.Argınhan(Student), Postgraduate, 2010
Analytical investigation of AASHTO LRFD response modification factors and seismic performance levels of circular bridge columns

CANER A. (Advisor)

A.ERDEM(Student), Postgraduate, 2010
Evaluation of structural analysis methods used for the design of tbm segmental linings

CANER A. (Advisor)

A.GÜRAY(Student), Postgraduate, 2010
Development of a new seismic isolator named “ball rubber bearing"

AKYÜZ U. (Co-Advisor), CANER A. (Co-Advisor)

C.ÖZKAYA(Student), Doctorate, 2010
Experimental evaluation of “ball rubber bearings” at different temperatures

CANER A. (Advisor)

S.ERDAL(Student), Postgraduate, 2010
Fragility based seismic vulnerability assessment of ordinary highway bridges in Turkey

YAKUT A. (Co-Advisor), CANER A. (Co-Advisor)

Ö.AVŞAR(Student), Doctorate, 2009
Evaluation of steel building design methodologies: TS 648, EUROCODE 3 and LRFD

CANER A. (Advisor)

A.ZERVENT(Student), Postgraduate, 2009
Impact of passenger comfort level on design of short-span composite steel I-girder high speed railroad bridges

CANER A. (Advisor)

T.ŞENTÜRK(Student), Postgraduate, 2009
Impact of passanger comfort level on design of short-span composite steel i-girder high speed railroad bridges

CANER A. (Advisor)

T.Şentürk(Student), Postgraduate, 2009
Effects of vertical excitation on seismic performance of highway bridges and hold-down device requirements

CANER A. (Advisor)

K.ARMAN(Student), Postgraduate, 2008
Detailed fem analysis of two different splice steel connections

TOPKAYA C. (Co-Advisor), CANER A. (Co-Advisor)

O.YILMAZ(Student), Postgraduate, 2008
Dynamic investigation and rehabilitation of existing railway truss bridge under high speed train loadings for passenger comfort

CANER A. (Advisor)

G.MUTLU(Student), Postgraduate, 2008
Structural fire safety of standart circular railroad tunnels under different soil conditions

CANER A. (Advisor)

A.Böncü(Student), Postgraduate, 2008
Seismic response of multi-span highway bridges with two-column reinforced concrete bents including foundation and column flexibility

CANER A. (Advisor)

T.YILMAZ(Student), Postgraduate, 2008
Structural fire safety of standard circular railroad tunnels under different soil conditions

CANER A. (Advisor)

A.BÖNCÜ(Student), Postgraduate, 2008
Analysis of blast loading effect on regular steel building structures

CANER A. (Advisor)

F.TAHMİLCİ(Student), Postgraduate, 2007
Seismic performance of multisimple span skew bridges retrofitted with link slabs

CANER A. (Advisor)

G.SEVGİLİ(Student), Postgraduate, 2007
A simple assessment of lateral pier response of standard highway bridges on pile foundations

CANER A. (Advisor)

Ü.TANER(Student), Postgraduate, 2007

Academic and Administrative Experience

2017 - Continues Professor

2005 - 2017 Associate Professor

2014 - Continues Member of Unit Promotion and Alumni Relations Commission

2020 - Continues Başkan

2019 - Continues President

2011 - Continues Başkan

2004 - Continues Assistant Professor

1996 - 2004 Senior Structural Engineer, PE