Prof. Dr. ALİ KALKANLI | AVESİS

Akademik Veri Yönetim Sistemi

Yayınlar & Eserler

Makaleler 29

1. INVESTIGATION OF MICROSTRUCTURE AND HARDNESS OF TEMPERED Fe-1C-2Si (WT.%) AND Fe-1C-2Si-2Cu-1Ni (WT.%) NANOSTRUCTURED BAINITIC STEELS

Tas Z. O., KALKANLI A., ÖGEL B.

ARCHIVES OF METALLURGY AND MATERIALS , cilt.70, sa.3, ss.1397-1408, 2025 (SCI-Expanded, Scopus)

2. Influence of aging process and reinforcement ratio on physical and mechanical properties of carbonized aramid reinforced Al7075 materials

Demir M. E., Çelik Y. H., KALKANLI A.

Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science , cilt.238, sa.10, ss.4547-4560, 2024 (SCI-Expanded, Scopus)

3. The effect of B4C reinforcements on the microstructure, mechanical properties, and wear behavior of AA7075 alloy matrix produced by squeeze casting

Demir M. E., ÇELİK Y. H., KILIÇKAP E., KALKANLI A.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING , cilt.237, sa.6, ss.2574-2584, 2023 (SCI-Expanded, Scopus)

4. The Effect of Rolling and Aging on Mechanical and Tribological Properties in B4C Particle Reinforced Al7075 Matrix Composites

Demir M. E., Çelik Y. H., KALKANLI A.

Arabian Journal for Science and Engineering , cilt.47, sa.12, ss.16187-16208, 2022 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

Sürdürülebilir Kalkınma

5. Mechanical Characterization of Graphene/Graphite Added 7075 Composites after Sintering and Thermomechanical Treatments

Crimson Publishers , cilt.17, sa.1, ss.1929-1930, 2022 (Hakemli Dergi)

6. Effect of isothermal transformation treatment and tempering on the microstructure and hardness of a medium c and high si steels

Kafadar G., Kalkanlı A., Özdemir A. T., Ögel B.

ISIJ International , cilt.61, sa.5, ss.1679-1687, 2021 (SCI-Expanded, Scopus)

7. Investigation of wear behavior of aged and non-aged SiC-reinforced AlSi7Mg2 metal matrix composites in dry sliding conditions

Çelik Y. H., Demir M. E., Kılıçkap E., Kalkanlı A.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING , cilt.42, sa.1, 2020 (SCI-Expanded, Scopus)

8. Effect of solidification rate on microstructure and primary carbides of AISI DC 53 cold work tool steel

Cardakh I. S., KALKANLI A.

CHINA FOUNDRY , cilt.16, sa.3, ss.211-216, 2019 (SCI-Expanded, Scopus)

9. Refinement of primary carbides in AISI DC 53 cold work tool steel by thin section copper permanent mould casting and water atomization

ÇARDAKLI İ. S., KALKANLI A.

INTERNATIONAL JOURNAL OF CAST METALS RESEARCH , cilt.32, sa.3, ss.145-153, 2019 (SCI-Expanded, Scopus)

10. Melt Infiltration Casting of Alumina Silicon Carbide and Boron Carbide Reinforced Aluminum Matrix Composites

KALKANLI A., Durmaz T., KALEMTAŞ A., ARSLAN G.

Journal of Material Science Engineering , cilt.6, sa.04, ss.357-361, 2017 (Hakemli Dergi)

11. Investigation of atmospheric corrosion layers on historic iron nails by micro-Raman spectroscopy

YUCEL N., KALKANLI A., CANER-SALTIK E. N.

JOURNAL OF RAMAN SPECTROSCOPY , cilt.47, sa.12, ss.1486-1493, 2016 (SCI-Expanded, Scopus)

12. Processing and microstructural characterization of liquid phase sintered tungsten-nickel-cobalt heavy alloys

DINCER O., PEHLIVANOGLU M. K., CALISKAN N. K., KARAKAYA İ., KALKANLI A.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS , cilt.50, ss.106-112, 2015 (SCI-Expanded, Scopus)

13. Dry sliding wear behaviour of Al-Fe-Si-V alloys at elevated temperatures

Koraman E., Baydoğan M., Sayilgan S., KALKANLI A.

WEAR , cilt.322, ss.101-107, 2015 (SCI-Expanded, Scopus)

14. Production of in situ aluminum-titanium diboride master alloy formed by slag-metal reaction

CHANGIZI A., KALKANLI A., SEVINC N.

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.509, sa.2, ss.237-240, 2011 (SCI-Expanded, Scopus)

15. Numerical simulation of solidification kinetics in A356/SiCp composites for assessment of as-cast particle distribution

CETIN A., KALKANLI A.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , cilt.209, sa.10, ss.4795-4801, 2009 (SCI-Expanded, Scopus)

16. Multi-scale characterization of particle clustering in discontinuously reinforced composites

CETIN A., KALKANLI A.

MATERIALS CHARACTERIZATION , cilt.60, sa.6, ss.568-572, 2009 (SCI-Expanded, Scopus)

17. Effect of solidification rate on spatial distribution of SiC particles in A356 alloy composites

CETIN A., KALKANLI A.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , cilt.205, ss.1-8, 2008 (SCI-Expanded, Scopus)

18. Oxygen potential values to produce compacted graphite cast iron

ELMABROUK O., KALKANLI A., SELÇUK E., ÇETİN A.

CANADIAN METALLURGICAL QUARTERLY , cilt.47, sa.2, ss.173-186, 2008 (SCI-Expanded, Scopus)

19. Synthesis and characterization of aluminum alloy 7075 reinforced with silicon carbide particulates

KALKANLI A., YILMAZ S.

MATERIALS & DESIGN , cilt.29, sa.4, ss.775-780, 2008 (SCI-Expanded, Scopus)

20. Effects of air atomisation, spray deposition and melt overflow techniques on microstructural features of Al-Fe-V-Si alloy

Kalkanli A., MENEKSE K., OZYURDA H.

POWDER METALLURGY , cilt.48, sa.3, ss.264-269, 2005 (SCI-Expanded, Scopus)

21. Evaluation of latent heat of solidification of grey cast iron from cooling curves

CETIN A., Kalkanli A.

CANADIAN METALLURGICAL QUARTERLY , cilt.44, sa.1, ss.1-5, 2005 (SCI-Expanded, Scopus)

22. Structure development in rapidly solidified Al-Fe-V-Si ribbons

Yaneva S., Kalkanli A., Petrov K., Petrov R., van Houbaert I., Kassabov S.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.373, ss.90-98, 2004 (SCI-Expanded, Scopus)

23. Microstructure characteristics in Al-C system after mechanical alloying and high temperature treatment

BOSTAN B., OZDEMIR A., Kalkanli A.

POWDER METALLURGY , cilt.47, sa.1, ss.37-42, 2004 (SCI-Expanded, Scopus)

24. Effect of copper alloying on fatigue life and fatigue crack growth behaviour of ductile cast irons

GURBUZ R., Kalkanli A., GONENC H.

CANADIAN METALLURGICAL QUARTERLY , cilt.43, sa.1, ss.137-144, 2004 (SCI-Expanded, Scopus)

25. Effect of spraying rate on microstructure of spray deposited Al-Fe-V-Si alloy

Kalkanli A., OREN E.

POWDER METALLURGY , cilt.46, sa.4, ss.324-328, 2003 (SCI-Expanded, Scopus)

26. The analysis of cooling curves for grey cast iron and its mechanical properties

Kalkanli A., UYSAL İ., GULDUR H.

CANADIAN METALLURGICAL QUARTERLY , cilt.42, sa.3, ss.343-348, 2003 (SCI-Expanded, Scopus)

27. Effect of cooling rate on microstructure and high temperature stability of rapidly solidified Al-Fe-V-Si alloys

Kalkanli A., ANGI S.

POWDER METALLURGY , cilt.42, sa.4, ss.359-365, 1999 (SCI-Expanded, Scopus)

28. Melt instabilities and the effect of surface tension on preventing edge serrations in melt overflow alloy strip casting

Kalkanli A., WOOD J., Braithwaite N.

ISIJ INTERNATIONAL , cilt.38, sa.2, ss.142-148, 1998 (SCI-Expanded, Scopus)

Creative Commons License

29. PRODUCTION AND ASSESSMENT OF DIRECT CAST SOFT MAGNETIC ALLOY STRIPS

KALKANLI A., WOOD J., GIBBS M.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS , cilt.83, sa.1-3, ss.395-398, 1990 (SCI-Expanded, Scopus)

Metrikler

Yayın

44

Yayın (WoS)

29

Yayın (Scopus)

31

Atıf (WoS)

380

H-İndeks (WoS)

9

Atıf (Scopus)

479

H-İndeks (Scopus)

10

Atıf (Scholar)

671

H-İndeks (Scholar)

13

Proje

33

Tez Danışmanlığı

64

Açık Erişim

39

BM Sürdürülebilir Kalkınma Amaçları