Akademik Veri Yönetim Sistemi
Tezin Türü: Doktora
Tezin Yürütüldüğü Kurum: Orta Doğu Teknik Üniversitesi, Türkiye
Tezin Onay Tarihi: 2012
Tezin Dili: İngilizce
Öğrenci: Bilge Alp Güney
Danışman: EMİNE NEVİN SALTIK
Özet:The use of lime mortars with pozzolanic additives is of special importance for the repair of historic masonry. In this study, the effect of pozzolanic materials on the final characteristics of mortars was investigated. Metakaolin, fly ash and historic brick powder were used as pozzolanic materials in mortar mixes with varying binder:pozzolan:aggregate ratios. Historic mortar samples from rubble stone masonry of Kahta Castle, a medieval structure in close vicinity of the Nemrut Dağ Monument, were also investigated to serve as a starting point for the preparation of repair mortars. Physical and physicomechanical tests, optical microscopy, chemical tests, SEM-EDX and XRD analyses were used to assess the properties of the historic mortars and repair mortars. Fat lime was found to be used in historic mortars with a high binder/aggregate ratio. They were observed to have relatively low density and high porosity with an average compressive strength of 7.4 MPa. Historic mortars were determined to have relatively high water vapour permeability and low water impermeability characteristics. In repair mortars setting was found to be predominantly due to carbonation along with pozzolanic reactions. However, abundant presence of stratlingite in mortars with added metakaolin indicated that the pozzolanic reactions preceded carbonation in those mortars. Use of pozzolanic materials increased the uniaxial compressive strength and modulus of elasticity of mortars compared with control samples. Using the same binder:pozzolan:aggregate ratio, highest increase was observed on mortars prepared with added fly ash at the end of 90 days. Durability parameters of repair mortars defined as wet to dry compressive strength were in the very good to excellent range according to Winkler’s classification. By using fly ash, design of lime mortars with high water impermeability and high water vapour permeability characteristics was accomplished.