Numerical modeling of Balçova geothermal field


Tezin Türü: Yüksek Lisans

Tezin Yürütüldüğü Kurum: Orta Doğu Teknik Üniversitesi, Mühendislik Fakültesi, Petrol ve Doğal Gaz Mühendisliği Bölümü, Türkiye

Tezin Onay Tarihi: 2010

Öğrenci: CAN POLAT

Eş Danışman: SERHAT AKIN, MAHMUT PARLAKTUNA

Özet:

The aim of this study is to construct a numerical reservoir model for Balçova geothermal field, which is located in the İzmir bay area of the Aegean coast. A commercial numerical simulation program, TOUGH2 was utilized with a graphical interface, PETRASIM to model the Balçova geothermal field. Natural state modeling of the field was carried out based on the conceptual model of the field, then history matching of production – injection practices of the field was established for the period of 1996 – 2008. The final stage of modeling was the future performance prediction of the field by using three different Scenarios. In Scenario-1, production and injection rates in year 2008 were repeated for 20 years. In Scenario-2, production and injection rates in year 2008 were repeated for the first 3 years, then they were increased at every 3 years. In Scenario-3, a new well (BT-1) that is assumed to be drilled to 1000 m depth is added for injecting some portion of water that was injected through BD-8 well. In that scenario, similar to Scenario-2, production and injection rates in year 2008 were repeated during the first 3 years, and then the rates of these wells (except the new well) were increased every three years. Analysis of the results indicated that in Scenario-2, compared to Scenario-1, both the temperatures of deep wells located at the eastern portion of the field (BD-6, BD-2, BD-14, BD-9, BD-11, BD-12) and the temperatures of deep wells located at the western portion (BD-4, BD-15, BD-7, BD-5) decreased more. In Scenario-3, compared to Scenario-1, the deep wells located at the eastern side experienced less temperature drops while the deep wells located at the western side experienced higher temperature drops. Such temperature differences were not encountered in shallow wells. No significant changes in bottom hole pressures of deep wells occurred in all three scenarios. On the other hand, shallow wells, especially B-10 and B-5, responded to Scenario-2 and Scenario-3 as decrease in bottom hole pressures.