Akademik Veri Yönetim Sistemi
Tezin Türü: Yüksek Lisans
Tezin Yürütüldüğü Kurum: Orta Doğu Teknik Üniversitesi, Mühendislik Fakültesi, İnşaat Mühendisliği Bölümü, Türkiye
Tezin Onay Tarihi: 2005
Tezin Dili: İngilizce
Öğrenci: Taner Özerkan
Danışman: AHMET TÜRER
Özet:This study includes structural instrumentation and monitoring of a 48.5 meters long cable-stayed pedestrian bridge located on Eskişehir road near METU campus. The objectives of the study are (1) to monitor the bridge responses during erection and operation stages so that the strain changes are determined during important events such as transportation, lifting, cabling, mid-support removal, slab concrete pouring and tile placement, (2) to determine existing cable forces using vibration frequencies, and (3) comparison of the experimental and analytical results for model updating. A total of 10 vibrating wire type strain gages were used for strain readings in steel members. The readings are taken at various stages of construction at every 10 to 30 minutes intervals. The bridge responses were monitored about three months and large strain changes in the order of 300 to 500 micro-strain were recorded during important events (e.g., transportation, lifting, cabling, mid-support removal, deck cover placement). The deck and tower natural vibration frequency measurements are conducted in two main directions. Two different FE models are constructed using two levels of complexity. FEM analysis results are compared against measured natural frequencies of the bridge and tower. Simplistic analytical model is modified to include temporary support removal in order to perform staged construction simulation and investigate cable force variations. Actual cable tensile forces are obtained using measured cable natural vibration frequencies. The cable frequencies are measured using a CR10X data logger and a PCB 393C accelerometer. Existing cable forces are compared against analytical simulations and symmetrically placed cables