Mixed-mode fracture analysis of orthotropic FGM coatings under mechanical and thermal loads

---

Tezin Türü: Doktora

Tezin Yürütüldüğü Kurum: Orta Doğu Teknik Üniversitesi, Mühendislik Fakültesi, Makina Mühendisliği Bölümü, Türkiye

Tezin Onay Tarihi: 2007

Öğrenci: KÜÇÜK AYŞE İLHAN

Danışman: SERKAN DAĞ

Özet:

In this study, it is aimed to investigate the mixed-mode fracture behavior of orthotropic functionally graded material (FGM) coatings bonded to a homogeneous substrate through a homogeneous bond-coat. Analytical and computational methods are used to solve the embedded cracking problems under mechanical or thermal loading conditions. It is assumed that the material property gradation of the FGM coating is in the thickness direction and cracks are parallel to the boundaries. The principal axes of orthotropy are parallel and perpendicular to the boundaries. A single embedded crack in the orthotropic FGM coating is investigated analytically assuming that crack surfaces are subjected to either uniform normal or uniform shear stresses. Using Fourier transformations, the problem is reduced to a couple of singular integral equations that are solved numerically to obtain the mixed-mode stress intensity factors, energy release rate and crack opening displacements. To investigate the analytically untractable problems without restrictive assumptions, a computational approach is employed. The adopted computational approach is based on finite element method and displacement correlation technique. Using the computational approach, fracture parameters are obtained considering single and periodic embedded cracking conditions in the orthotropic FGM coatings under mechanical or thermal loads. The results obtained in this study show the effects of material nonhomogeneity, material orthotropy and geometric variables on the fracture behavior of the structure.