Akademik Veri Yönetim Sistemi
Tezin Türü: Yüksek Lisans
Tezin Yürütüldüğü Kurum: Orta Doğu Teknik Üniversitesi, Türkiye
Tezin Onay Tarihi: 2011
Tezin Dili: İngilizce
Öğrenci: İrem Vural
Eş Danışman: Güngör Gündüz, GÜNGÖR GÜNDÜZ
Özet:Thermal mismatch between different components of a system could be sources of problems like residual stress induced cracking, thermal fatigue or even optical misalignment in certain high technology applications. Use of materials with tailored thermal expansion coefficient is a counter-measure to overcome such problems. With its negative thermal expansion coefficient zirconium tungstate (ZrW2O8) is a candidate component to be used in synthesis of composites with controlled thermal expansion coefficient (CTE). ZrW2O8 is typically produced by solid-state reaction between zirconium oxide and tungsten oxide at 1200oC. However, it has been demonstrated that ZrW2O8 can also be synthesized using wet chemical techniques, which provide a superior chemical homogeneity that often extents down to the atomic scale, and the convenient means of controlling nucleation and growth of the primary crystallites. With the commonly adopted wet chemical approaches, it is possible to crystallize particles with sizes in the submicrometer range at temperatures as low as 600 oC or even lower. In these studies, precursors are aged either below 100 oC (7 days – 3 weeks), or at 160-180 oC under hydrothermal conditions (1–2 days). Besides the obvious disadvantage in the ageing steps, use of tungsten sources with high cost in all approaches, constitutes the other disadvantage. Production of composites with tunable controlled thermal expansion (CTE) has been achieved by blending negatively and positively expanding materials in different proportions. In majority of these studies composites have been produced by conventional sintering methods. Spark Plasma Sintering (SPS) is a recent technique; in which sintering can be achieved at relatively low temperatures in short durations. There is only one study made by Kanamori and coworkers on the use of SPS in sintering of a composite, in which ZrW2O8 is one of the constituents [1]. This study aims the synthesis of ZrW2O8 particles and composites that possess tunable or zero CTE. A novel precursor recipe for ZrW2O8 synthesis was developed. In preparation of the precursor a total of 2 days of ageing and a temperature less than 100 oC was used. It was developed using a cost-effective tungsten source, namely tungstic acid and its final pH was lower than 1. The particles obtained from ‘unwashed’ procedure had sizes in micrometer range, while those obtained from ‘washed’ case had sizes in the range of 400-600 nm. These precursors could readily be crystallized at 600 oC, which in turn provided the desired particle sizes for composite applications. Experimental details on the precursor development are hereby presented with a discussion on the effects of solution parameters (i.e. solubility of tungstic acid, adjustment of the stoichiometry, ageing time) on the phase purity of the fired product. Zirconium oxide (ZrO2) has positive vi thermal expansion, therefore ZrW2O8/ZrO2 was selected as the composite system, and for their synthesis both conventional and spark plasma sintering methods were experimented. Composition ranges that provide composites with almost zero CTE’s were determined. The composite having a composition of containing 35% ZrW2O8, 65% ZrO2, and 35 w/o Al2O3 and sintered at 1200 oC for 24 hours had an expansion coefficient of 0.20 x 10-6/K for conventional method, while the one having a composition of 55% ZrW2O8, 45% ZrO2 and sintered at 1000 oC for 5 minutes had an expansion coefficient of 0.94 x 10-6/K for spark plasma sintering method. For characterization of the products X-ray diffraction (XRD), scanning electron microscopy (SEM), photon correlation spectroscopy (PCS), and thermal and dilatometer analyses (DTA/TGA/DMA) were used.