Akademik Veri Yönetim Sistemi
Tezin Türü: Yüksek Lisans
Tezin Yürütüldüğü Kurum: Orta Doğu Teknik Üniversitesi, Mühendislik Fakültesi, Petrol ve Doğal Gaz Mühendisliği Bölümü, Türkiye
Tezin Onay Tarihi: 2011
Tezin Dili: İngilizce
Öğrenci: Kıymet Gizem Gül
Danışman: MUSTAFA VERŞAN KÖK
Özet:In this thesis, four different crude oil samples and their saturate, aromatic and resin fractions were analyzed by two different thermoanalytical methods, thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The experiments were performed at three different heating rates (5, 10 and 15 °C/min) under air atmosphere. Same gas flow rate and same pressure were applied to all samples. The aim is to determine the kinetic analysis and combustion behavior of crude oils and their fractions and also determining the effect of heating rate on all samples. For all samples two main reaction regions were observed in thermogravimetry (TG), differential thermogravimetry (DTG) and DSC curves due to the oxidative degradation of crude oil components. It was deduced that the free moisture, volatile hydrocarbons were evaporated from the crude oils, light hydrocarbons were burned and fuel was formed in the first reaction region. The second reaction region was the main combustion region where the fuel was burned. From the TGA curves, it was detected that the heavier fraction, resins, lost considerable amounts of their initial mass, approximately 35%, while saturates lost only approximately 3% of their initial mass in the second reaction region. DSC curves of the samples were also examined and observed that as the sample got heavier, the heat of the reaction increased. Saturates, lightest part of the crude oil fractions, gave minimum heat of reaction. As the heating rate increased, shift of peak temperatures to high values and higher reaction regions were observed. The kinetic analysis of crude oils and their fractions were also performed using different kinetic methods. Activation energies (E), mean activation energies (Emean) and Arrhenius constants were found for crude oils and fractions. It was deduced that the resins gave the highest activation energy and Arrhenius constant for both reaction regions. Moreover, it was encountered that heating rate has no effect on activation energies.