Katkılı çimento üretiminde kullanımı için perlitin puzolanik özelliğinin araştırılması


Tezin Türü: Doktora

Tezin Yürütüldüğü Kurum: Orta Doğu Teknik Üniversitesi, Mühendislik Fakültesi, İnşaat Mühendisliği Bölümü, Türkiye

Tezin Onay Tarihi: 2005

Tezin Dili: İngilizce

Öğrenci: Tahir Kemal Erdem

Danışman: TURHAN Y. ERDOĞAN

Özet:

Perlite is a glassy volcanic rock that contains approximately 70-75% silica and 12-18% alumina. There are very large perlite reserves in the world (~6700 million tons) and approximately two thirds of these is in Turkey. Due to its high amounts of silica and alumina, at the beginning of such a study, it seemed that it would be worth first to find out whether perlite possesses sufficient pozzolanic property when it is a finely divided form and then to investigate whether it could be used as a pozzolanic addition in producing blended cements. In this study, perlites from two different regions (Izmir and Erzincan) were tested for their pozzolanic properties. After obtaining satisfactory results, grindability properties of the clinker, perlites and their different combinations were investigated. Several blended cements with different fineness values and different perlite amounts were produced by either intergrinding or separate grinding methods. The tests performed on the cement pastes and mortars containing the blended cements produced were as follows: Water requirement, normal consistency, setting time, soundness, compressive strength, rapid chloride permeability, resistance to sulfate attack and resistance to alkali-silica reactions. The results showed that Turkish perlites possess sufficient pozzolanic characteristics to be used in cement and concrete industry. Moreover, the properties tested in this study satisfied the requirements stated in the standards for blended cements. The durability of the mortars was found to be improved by 20% or more perlite incorporation.