Akademik Veri Yönetim Sistemi
Tezin Türü: Yüksek Lisans
Tezin Yürütüldüğü Kurum: Orta Doğu Teknik Üniversitesi, Mühendislik Fakültesi, Elektrik ve Elektronik Mühendisliği Bölümü, Türkiye
Tezin Onay Tarihi: 2006
Öğrenci: ENGİN UFUK TEMOÇİN
Eş Danışman: ŞİMŞEK DEMİR, TAYFUN AKIN
Özet:This thesis presents the design and fabrication of coplanar waveguide to microstrip transitions and planar spiral inductors, and the design of metal-insulator-metal capacitors, a planar band-pass, and a low-pass filter structures as an application for the inductors and capacitors using the RF MEMS technology. This thesis also includes a packaging method for RF MEMS devices with the use of “benzocyclobutene” as bonding material. The transition structures are formed by four different methods between coplanar waveguide end and microstrip end, and they are analyzed in 1-20 GHz. Very low loss transitions are obtained by maintaining constant characteristic impedance which is the same as the port impedance through the transition structures. The planar inductors are formed by square microstrip spirals on a glass substrate. Using the self-inductance propery of a conductive strip and the mutual inductance between two conductor strips in a proper arrangement, the inductance value of each structure is defined. Inductors from 0.7 nH up to 20 nH have been designed and fabricated. The metal-insulator-metal capacitors are formed by two coplanar waveguide structures. In the intersection, one end of a coplanar waveguide is placed on top of the end of the other coplanar waveguide with a dielectric layer in between. Using the theory of parallel plate capacitors, the capacitance of each structure is adjusted by the dimensions of the coplanar waveguides, which obviously adjust the area of intersection. Capacitors from 0.3 pF up to 9.8 pF have been designed. A low-pass filter and a band-pass filter are designed using the capacitors and inductors developed in this thesis. In addition to lumped elements, the interconnecting transmission lines, junctions and input-output lines are added to filter topologies. The RF MEMS packaging is realized on a coplanar waveguide structure which stands on a silicon wafer and encapsulated by a silicon wafer. The capping chip stands on the BCB outer ring which promotes adhesion and provides semi hermeticity. Keywords: Transition between transmission lines, planar spiral inductor, metal-insulator-metal capacitor, RF MEMS packaging, surface micromachining.