Stress and fracture analysis of riveted joints

---

Tezin Türü: Yüksek Lisans

Tezin Yürütüldüğü Kurum: Orta Doğu Teknik Üniversitesi, Mühendislik Fakültesi, Makina Mühendisliği Bölümü, Türkiye

Tezin Onay Tarihi: 2008

Öğrenci: GALİP KEÇELİOĞLU

Danışman: SERKAN DAĞ

Özet:

The objective of this study is to model and analyze a three dimensional single riveted lap joint (with and without a crack). By using finite element method, stress and fracture analyses are carried out under both the residual stress field and external tensile loading. Using a two step simulation, riveting process and subsequent tensile loading of the lap joint are simulated to determine the residual and overall stress state. Residual stress state due to riveting is obtained by interference and clamping misfit method. By employing different interference and clamping misfit values, the effects of riveting process parameters on stress state are examined. Two cracks namely the semi elliptical surface crack at faying surfaces of plates and the quarter elliptical corner crack at rivet hole are the most widely observed crack types in riveted joints. Fracture analysis of cracked riveted joints is carried out by introducing these two crack types to the outer plate at a plane perpendicular to the loading. The mixed mode stress intensity factors (SIFs) and energy release rates (G) around the crack front are obtained by using displacement correlation technique (DCT). Effects riveting process parameters (interference and clamping ratios) and geometrical parameters (crack shape and size) on fracture parameters are studied. The stress intensity factor solutions presented herein could be useful for correlating fatigue crack growth rates, fracture toughness computation, and multiple site damage (MSD) analysis in aircraft bodies.