Research Information System
SEPARATION AND PURIFICATION TECHNOLOGY, vol.260, 2021 (SCI-Expanded, Scopus)
In this work, we employed an environmentally friendly approach based on plasma enhanced chemical vapour deposition (PECVD) to modify titania nanotubes (TNTs), aiming to obtain better dispersion of nanofillers in polyamide (PA) layer of thin film nanocomposite (TFN) reverse osmosis membrane. Owing to the hydrophilic nature of TNTs, dispersing it homogenously in organic solvent during interfacial polymerization process is difficult to achieve. Therefore, the TNTs are mildly modified by PECVD technique in order to ameliorate its stability in organic solvent. Our results showed that depositing thin layer of methyl methacrylate (MMA) on the TNTs surface could enhance its dispersion quality in organic solvent and further improve the properties of PA layer by enhancing membrane water flux by 16% without compromising NaCl rejection. More importantly, the developed TFN membrane showed excellent fouling resistance by recording flux recovery rate of 85.77% compared to 57.94% shown by the control membrane. Its antibacterial property was also obviously better than that of control membrane. Overall, the developed TFN membrane demonstrated good performance stability with respect to NaCl rejection and water permeability and the trace amount of nanofillers detected in the water sample (in the level of mu g/L) did not negatively influence the membrane filtration performance.