A PARYLENE BONDING BASED FABRICATION METHOD FOR GRAVIMETRIC RESONANT BASED MASS SENSORS

Gokce F., Aydin E., Kangul M., Toral T. B., Zorlu O., Sardan-Sukas O., ...Daha Fazla

19th International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers), Kaohsiung, Tayvan, 18 - 22 Haziran 2017, ss.1195-1198 identifier

  • Yayın Türü: Bildiri / Tam Metin Bildiri
  • Basıldığı Şehir: Kaohsiung
  • Basıldığı Ülke: Tayvan
  • Sayfa Sayıları: ss.1195-1198
  • Orta Doğu Teknik Üniversitesi Adresli: Evet

Özet

In this study, a fabrication method utilizing parylene bonding for gravimetric resonant based mass sensors is presented. First, parylene bonding was experimentally tested and compared with the literature. Average shear strength was measured as 16.3 MPa (sigma=3MPa). Then, resonators located on top of a microchannel for real-time detection were fabricated using the presented method. Simulations and experiments verify proper operation of the fabricated resonators, and the applicability of the method for fabricating similar resonant based sensors.