A novel in-operation high g-survivable MEMS gyroscope


Azgin K., Temiz Y., Akın T.

6th IEEE Sensors Conference, Georgia, Amerika Birleşik Devletleri, 28 - 31 Ekim 2007, ss.111-114 identifier identifier

  • Yayın Türü: Bildiri / Tam Metin Bildiri
  • Doi Numarası: 10.1109/icsens.2007.4388348
  • Basıldığı Şehir: Georgia
  • Basıldığı Ülke: Amerika Birleşik Devletleri
  • Sayfa Sayıları: ss.111-114
  • Orta Doğu Teknik Üniversitesi Adresli: Evet

Özet

This paper presents a new S01-MEMS gyroscope with very high in-operation shock survivability together with very low R 2 nonlinearity and scale factor g-sensitivity, owing to its optimized mechanical structure and durable readout electronics. Maximum stress induced on the gyro structure under a shock loading of 10,000g is determined to be below 860MPa. The new gyroscope also allows keeping the proof mass voltage within the supply voltages of readout electronics, preventing the possibility of electronic failure in case of pun in. The scale factor at the atmospheric pressure is measured as 10.4mV/(degrees/sec) with an R-2 nonfinearity of 0.03% and scale-factor g sensitivity of 1.89(mV/degrees/sec)/g. At the atmospheric pressure, the bias instability and angle random walk of the gyroscope are measured as 391 degrees/hr and 5.2 degrees/root hr, respectively. The gyroscope gives even better performance characteristics at vacuum ambient with a bias instability and angle random walk of 105 degrees/hr and 5.29 degrees/root hr, respectively.