Crop-aligned Agrivoltaic Design for Semi-arid and Mediterranean Türkiye: Simulated PPFD Suitability Under A- and V-Shaped Bifacial PV Layouts
Open Agriculture Journal, cilt.20, 2026 (Scopus)
- Yayın Türü: Makale / Tam Makale
- Cilt numarası: 20
- Basım Tarihi: 2026
- Doi Numarası: 10.2174/0118743315496436260827112304
- Dergi Adı: Open Agriculture Journal
- Derginin Tarandığı İndeksler: Scopus
- Anahtar Kelimeler: Agrivoltaics, Bifacial PV, Cover ratio, High-value crops, PPFD analysis, Shading control
- Açık Arşiv Koleksiyonu: AVESİS Açık Erişim Koleksiyonu
- Orta Doğu Teknik Üniversitesi Adresli: Evet
Özet
Introduction: Agrivoltaic (AgriPV) systems enable the co-production of food and electricity, but effective design requires matching crop-specific light requirements to local climate and structural configuration. This study evaluated how PV structural typology and cover ratio jointly shape under-panel light conditions across two climatically contrasting Turkish sites: Harran (hot semi-arid, BSh) and Manavgat (warm-Mediterranean, Csa). Methods: Two bifacial PV layouts, A-shaped (ridge) and V-shaped (valley), were simulated at cover ratios of 35%, 50%, and 60%. Using Rhinoceros 3D with Ladybug Tools, hourly ground-level irradiance was simulated and converted to photosynthetic photon flux density (PPFD). Monthly PPFD was evaluated at one open-sky reference and five under-panel sampling points, and spatial means, standard deviations, coefficients of variation, and leave-one-point-out sensitivity were calculated. Results: Increasing cover ratio systematically reduced PPFD, while V-shaped layouts generally showed lower spatial dispersion than A-shaped layouts. Monthly spatial standard deviations ranged from 42.4–297.1 µmol m⁻² s⁻¹ in Manavgat and 46.3–376.2 µmol m⁻² s⁻¹ in Harran. Simulated light compatibility was strongest for avocado at 35–50% cover ratio, coffee at 50–60%, black cumin at 35–50%, and saffron at 50–60%, with V-shaped configurations generally providing more uniform shading. Discussion: Structural typology and cover ratio jointly modulated PPFD suitability and spatial uniformity, indicating that crop-specific AgriPV design should consider both site climate and array geometry. Rainwater-harvesting channels also emerged as a structurally compatible co-benefit. However, deterministic simulation assumptions, fixed spectral conversion, limited sampling points, and the absence of field validation constrain direct agronomic interpretation. Conclusion: Combining structural typology, cover ratio, and site-specific climatic conditions provides a practical preliminary framework for crop-compatible AgriPV design in semi-arid and Mediterranean environments.