Design, Implementation, and Operation of a New C-Type 2nd Harmonic Filter for Electric Arc and Ladle Furnaces


Gercek C. O. , ERMİŞ M. , Ertas A., Kose K. N. , Unsar O.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, cilt.47, sa.4, ss.1545-1557, 2011 (SCI İndekslerine Giren Dergi) identifier identifier

  • Cilt numarası: 47 Konu: 4
  • Basım Tarihi: 2011
  • Doi Numarası: 10.1109/tia.2011.2155020
  • Dergi Adı: IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS
  • Sayfa Sayıları: ss.1545-1557

Özet

In this paper, the transient overvoltage suppression capability and harmonic filtering performance of C-type 2nd harmonic filters (HFs) are optimized by using two-stage damping resistors; one is permanently connected to the filter circuit, while the other one is switched on by back-to-back connected thyristors during furnace transformer and HF energization periods. However, in conventional C-type 2nd HFs, there is only one damping resistor, which is permanently connected to the filter circuit. In conventional designs, either the filtering performance is maximized or transient overvoltage suppression capability is enhanced or a compromise is made between these two objectives. This new configuration of C-type 2nd HFs has been applied to a sample iron and steel plant in which two ladle refining furnaces are in operation. For this purpose, an static var compensation system has been designed and installed, which is composed of a thyristor-controlled reactor, a 3rd HF, and the new C-type 2nd HF configuration proposed in this paper. The results of field tests and simulation studies show that the proposed C-type 2nd HF configuration gives much better results than conventional designs.