Electrical characteristics of organic heterojunction with an alternating benzotriazole and fluorene containing copolymer


Gullu H., Yildiz D., TOPPARE L. K. , ÇIRPAN A.

Journal of Materials Science: Materials in Electronics, cilt.31, sa.21, ss.18816-18831, 2020 (SCI İndekslerine Giren Dergi) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 31 Konu: 21
  • Basım Tarihi: 2020
  • Doi Numarası: 10.1007/s10854-020-04421-4
  • Dergi Adı: Journal of Materials Science: Materials in Electronics
  • Sayfa Sayıları: ss.18816-18831

Özet

The current-voltage (I - V) and capacitance-voltage (C - V) characteristics of the organic heterojunction diode were investigated in a wide temperature range from 80 to 320 K and frequency range from 10 kHz to 1 MHz, respectively. Alternative to the copolymer partner poly(3-hexylthiophene) (P3HT) to [6,6]phenyl-C61-butyric acid methyl ester (PCBM), poly((9,9-dioctylfluorene)-2,7diyl-(4,7-bis(thien-2-yl)-2-dodecyl-benzo[1,2,3]triazole)) (named as copolymer in this work) was adapted to the bulk-heterojunction layer in the organic diode. Together with the use of Lif/Al bilayer electrode, the diode was fabricated as in the form of Al/LiF/copolymer:PCBM/PEDOT:PSS/ITO/glass. Under the applied bias voltage, this organic-based diode shows two- orders of magnitude rectifying behavior. According to thermionic emission (TE) model, the diode parameters such as saturation current, barrier height and ideality factor were determined and parasitic resistances were also extracted from the conventional ohmic relation. As to the temperature dependency of the diode parameters and their response to the temperature variation, barrier inhomogeneity, surface state and series resistance effects were found in dominant behavior on the current flow. The conduction mechanism was modeled by assuming low-barrier patches around the main barrier that supports TE at low temperatures and their distribution was expressed by a Gaussian function. In addition, series resistance values were detailed depending on temperature using Cheung's model. C - V analysis was performed to evaluate the distribution of surface states at the interface as a function of frequency. Based on the C - V plots, the effects of charges at these traps were observed especially at low frequencies. Additionally, from these results, Fermi level, surface potential and donor concentration values were evaluated in a wide frequency range.