Estimation of Filter Cake Thickness for Water-based Drilling Fluids


KÖK M. V., Iscan A. G.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, cilt.32, sa.5, ss.400-406, 2010 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 32 Sayı: 5
  • Basım Tarihi: 2010
  • Doi Numarası: 10.1080/15567030802464024
  • Dergi Adı: ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.400-406
  • Anahtar Kelimeler: filter cake, filtration, mud, water-base drilling fluids, HORIZONTAL WELLS, FORMATION DAMAGE, FILTRATION, PERMEABILITY, MECHANISM, INVASION, BUILDUP, MODEL
  • Orta Doğu Teknik Üniversitesi Adresli: Evet

Özet

It is obvious that estimation of filter cake thickness is one of the important parameters in drilling operations. In this study, dynamic filtration data was used to determine the filter cake thickness. Predictions were made through linear filtration cake model by using dynamic filtration experimental data. Linear filtration model can be used to approximate radial filtration model; only the thickness of the filter and filter cake is sufficiently smaller than the radius of the filter surface exposed to slurry. It was observed that the thickness of the filter cake at dynamic conditions is less than that of static conditions since there is no continuous deposition due to erosion effects at dynamic conditions.