High performance ligands for the removal of aqueous boron species by continuous polymer enhanced ultrafiltration


YÜRÜM A., TARALP A., Bicak N., Ozbelge H. O., YILMAZ L.

DESALINATION, cilt.320, ss.33-39, 2013 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 320
  • Basım Tarihi: 2013
  • Doi Numarası: 10.1016/j.desal.2013.04.020
  • Dergi Adı: DESALINATION
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.33-39
  • Anahtar Kelimeler: Boron removal, Polymer enhanced ultrafiltration, Polymer boron complexation, Polychelatogen, ION-EXCHANGE-RESINS, FACILITATED TRANSPORT, SELECTIVE SEPARATION, CHELATING POLYMERS, FUNCTIONAL POLYMER, WASTE-WATER, BORATE FORM, BORIC-ACID, METAL-IONS, COMPLEXATION
  • Orta Doğu Teknik Üniversitesi Adresli: Evet

Özet

Boron is an essential element for plant growth, but it may also result in toxicity when present in excessive amounts. In this study, continuous polymer enhanced ultrafiltration (PEUF) was developed to selectively recover aqueous boron species (collectively termed "boron" hereafter) from solution. The PEUF process consisted of complexing boron to a water-soluble polymer, removing all non-complexed solutes by UF, restoring the unloaded polymer, and isolating the newly freed boron by UF. Three different polymers were synthesized to complex boron. One was derived from N-meth-yl-D-glucamine (P1). Two others were derived from iminodipropyleneglycol (P2 and P2G). Operating parameters such as the boron/polymer ratio (0.01-1), pH value (7-10), and polymer type (P1, P2, and P2G) were assessed. An increase of the pH value led to increased boron retention. As well, a decreased loading value enhanced retention. A maximum retention of 90.1% exceeded the highest values reported in the literature under similar conditions. The permeate flux remained constant at approximate to 20 L/m(2) h, and operation was unaffected by classic problems such as fouling. The results showed that continuous PEUF utilizing the above polymers could serve as an alternative method for the removal of environmental boron. (C) 2013 Elsevier B.V. All rights reserved.