CFD analysis of water injection effects on ignition overpressure in a 2D supersonic impinging jet
Ankara International Aerospace Conference, AIAC 2025, Ankara, Türkiye, 17 - 19 Eylül 2026, cilt.3271, (Tam Metin Bildiri)
- Yayın Türü: Bildiri / Tam Metin Bildiri
- Cilt numarası: 3271
- Doi Numarası: 10.1088/1742-6596/3271/1/012025
- Basıldığı Şehir: Ankara
- Basıldığı Ülke: Türkiye
- Açık Arşiv Koleksiyonu: AVESİS Açık Erişim Koleksiyonu
- Orta Doğu Teknik Üniversitesi Adresli: Evet
Özet
During the ignition of launch vehicles, two distinct types of pressure waves are generated in the launch environment. 1- Ignition overpressure (IOP) wave 2- Acoustic wave. In order to have a safe and successful launch, these pressure waves must be analyzed and mitigated. IOP is generated by the rapid expansion of exhaust gases which compress the surrounding air and form a shock or blast wave. IOP wave is characterized by high pressure magnitudes and low frequencies. In contrast, acoustic waves have lower pressure magnitudes and higher frequencies. This study presents a computational fluid dynamics (CFD) analysis of IOP for a 2D supersonic impinging jet and evaluates the effect of water injection as a mitigation technique. The simulations are performed using the reactingLagrangianPimpleCentralFoam (RLPCF) solver, an external OpenFOAM library. The solver can handle compressible multiphase flows. The dry case (no water) was validated against prior inviscid results, showing good agreement in the peak pressure history during the IOP phase. The injection of water reduces the peak pressure by approximately 1709 Pa at sampling point No. 10 and by 3707 Pa at sampling point No. 6. These correspond to reductions of 13.1% and 13.5% in peak incident overpressure (IOP), respectively. The results show that water injection attenuates IOP and partially suppresses shock-cell structures.