ELECTRICAL-IMPEDANCE TOMOGRAPHY USING INDUCED CURRENTS


GENCER N. G., KUZUOGLU M., IDER Y.

IEEE TRANSACTIONS ON MEDICAL IMAGING, cilt.13, sa.2, ss.338-350, 1994 (SCI-Expanded) identifier identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 13 Sayı: 2
  • Basım Tarihi: 1994
  • Doi Numarası: 10.1109/42.293927
  • Dergi Adı: IEEE TRANSACTIONS ON MEDICAL IMAGING
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.338-350
  • Orta Doğu Teknik Üniversitesi Adresli: Evet

Özet

The mathematical basis of a new imaging modality, Induced Current Electrical Impedance Tomography (EIT), is investigated. The ultimate aim of this technique is the reconstruction of conductivity distribution of the human body, from voltage measurements made between electrodes placed on the surface, when currents are induced inside the body by applied time varying magnetic fields. In this study the two-dimensional problem is analyzed. A specific 9-coil system for generating nine different exciting magnetic fields (50 kHz) and 16 measurement electrodes around the object are assumed. The partial differential equation for the scalar potential function in the conductive medium is derived and Finite Element Method (FEM) is used for its solution. Sensitivity matrix, which relates the perturbation in measurements to the conductivity perturbations, is calculated. Singular Value Decomposition of the sensitivity matrix shows that there are 135 independent measurements. It is found that measurements are less sensitive to changes in conductivity of the object's interior. While in this respect induced current EIT is slightly inferior to the technique of injected current EIT (using Sheffield protocol), its sensitivity matrix is better conditioned. The images obtained are found to be comparable to injected current EIT images in resolution. Design of a coil system for which parameters such as sensitivity to inner regions and condition number of the sensitivity matrix are optimum, remains to be made.